THE FUTURE FOR EXPLORATION IN THE GIPPSLAND BASIN

1989 ◽  
Vol 29 (1) ◽  
pp. 430 ◽  
Author(s):  
A.J. Mebberson
Keyword(s):  
Seismic Data ◽  
High Frequency ◽  
Point Of View ◽  
Petroleum Exploration ◽  
Deep Penetration ◽  
Velocity Analysis ◽  
Structural Style ◽  
Future Success ◽  
Gippsland Basin ◽  
Potential Parameters

The Gippsland Basin is, by Australian standards, mature from a petroleum exploration point of view but retains significant potential for success. The main recognised plays of Top Latrobe porosity, deeper fault blocks and stratigraphic truncations are in various stages of exploitation, with the latter two showing the greater undiscovered potential. Parameters for hydrocarbon accumulations, such as source, seal, structural style and trap timing, are now reasonably well documented and future success in established and untested plays will rely heavily on detailed velocity analysis, deep- penetration high- frequency seismic data and an integrated regional approach to stratigraphic controls.

DEPOSITIONAL MODELLING OF THE GIPPSLAND BASIN AND THE BARROW-EXMOUTH SUB-BASINS

1994 ◽  
Vol 34 (1) ◽  
pp. 350 ◽  
Author(s):  
Keyu Liu ◽  
Lincoln Paterson ◽  
Feng Xu Jian
Keyword(s):  
Sea Level ◽  
Sequence Stratigraphy ◽  
Seismic Data ◽  
High Frequency ◽  
Sedimentary Facies ◽  
Sediment Supply ◽  
Well Logs ◽  
Tectonic Movement ◽  
Depositional Processes ◽  
Gippsland Basin

SEDPAK is a forward modelling computer program for depositional processes developed by the University of South Carolina's StratMod Group. It simulates the geometry of generalised lithofacies in a sedimentary sequence or a basin by considering principally four major geological variables: eustatic sea level, tectonic movement, sediment accumulation, and initial and evolving basin surfaces.Based on seismic data, well logs and other information from drill holes, the geometries of sedimentary sequences of the Gippsland Basin and the Barrow-Exmouth Sub-basins have been successfully reproduced on both basin and reservoir scales using SEDPAK 3.12. The simulation results indicate that eustacy, tectonics, sediment input and basin physiography can be equally important in controlling the geometry of strata and basin architecture. However, some differences exist: (1) tectonic movement normally contributes to long-term variations of the first order (megasequence) basin architecture and configuration; (2) the second order (sequence) basin architecture and stratal geometry can be controlled by either sediment supply, eustacy, tectonism or a combination; and (3) high frequency facies variations and stratal geometry within individual sequences are primarily controlled by eustatic sea level variations and basin physiography.This study has demonstrated that SEDPAK is a useful tool for reconstruction of basin evolution histories and for reservoir characterisation. It can also be used to predict sedimentary facies in undrilled exploration frontier areas. In addition, it can be used to address some critical assumptions and problems in the sequence stratigraphy concept. SEDPAK is particularly useful in the study of high frequency sequence stratigraphy and cyclicity, where various sequence or parasequence bounding surfaces and internal geometry can not be easily recognised from seismic data, well logs and outcrops.

Petroleum geological activities in West Greenland in 1998

1999 ◽  
pp. 46-56
Author(s):  
Flemming G. Christiansen ◽  
Anders Boesen ◽  
Jørgen A. Bojesen-Koefoed ◽  
James A. Chalmers ◽  
Finn Dalhoff ◽  
...  
Keyword(s):  
Seismic Data ◽  
Working Group ◽  
Petroleum Exploration ◽  
Geological Survey ◽  
Original Series ◽  
West Greenland ◽  
Phillips Petroleum ◽  
Petroleum Resources ◽  
The Government ◽  
Year 2000

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Christiansen, F. G., Boesen, A., Bojesen-Koefoed, J. A., Chalmers, J. A., Dalhoff, F., Dam, G., Ferré Hjortkjær, B., Kristensen, L., Melchior Larsen, L., Marcussen, C., Mathiesen, A., Nøhr-Hansen, H., Pedersen, A. K., Pedersen, G. K., Pulvertaft, T. C. R., Skaarup, N., & Sønderholm, M. (1999). Petroleum geological activities in West Greenland in 1998. Geology of Greenland Survey Bulletin, 183, 46-56. https://doi.org/10.34194/ggub.v183.5204 _______________ In the last few years there has been renewed interest for petroleum exploration in West Greenland and licences have been granted to two groups of companies: the Fylla licence operated by Statoil was awarded late in 1996; the Sisimiut-West licence operated by Phillips Petroleum was awarded in the summer of 1998 (Fig. 1). The first offshore well for more than 20 years will be drilled in the year 2000 on one of the very spectacular structures within the Fylla area. To stimulate further petroleum exploration around Greenland – and in particular in West Greenland – a new licensing policy has been adopted. In July 1998, the administration of mineral and petroleum resources was transferred from the Danish Ministry of Environment and Energy to the Bureau of Minerals and Petroleum under the Government of Greenland in Nuuk. Shortly after this, the Greenlandic and Danish governments decided to develop a new exploration strategy. A working group consisting of members from the authorities (including the Geological Survey of Denmark and Greenland – GEUS) made recommendations on the best ways to stimulate exploration in the various regions on- and offshore Greenland. The strategy work included discussions with seismic companies because it was considered important that industry acquires additional seismic data in the seasons 1999 and 2000.

Fracture mapping from azimuthal velocity analysis using 3D surface seismic data

1996 ◽  
Author(s):  
Dennis Corrigan ◽  
Robert Withers ◽  
Jim Darnall ◽  
Tracey Skopinski
Keyword(s):  
Seismic Data ◽  
Azimuthal Velocity ◽  
Velocity Analysis ◽  
3D Surface ◽  
Fracture Mapping

Improving The Reliability of Velocity Analysis of Shallow Seismic Data

2021 ◽  
Author(s):  
A.G. Yaroslavtsev ◽  
M.V. Tarantin ◽  
T.V. Baibakova
Keyword(s):  
Seismic Data ◽  
Velocity Analysis ◽  
Shallow Seismic

scholarly journals The structure of the sedimentary complex of the Middle and South Caspian depressions (Azerbaijan sector)

2021 ◽  
Vol 43 (4) ◽  
pp. 199-216
Author(s):  
N.P. Yusubov ◽  
I.S. Guliyev
Keyword(s):  
Seismic Data ◽  
Oil And Gas ◽  
Sedimentary Cover ◽  
Clay Content ◽  
Geological Structure ◽  
Point Of View ◽  
South Caspian Basin ◽  
Origin And Evolution ◽  
Geological Interpretation ◽  
High Degree

The high degree of knowledge of the upper horizons of the sedimentary cover of the Middle and South Caspian depressions, given an insufficient increase in hydrocarbon reserves, leads to the need for a detailed approach to the search for oil and gas deposits in deep-seated sediments (over 6 km). During the geological interpretation of new highly informative seismic data, as well as data of deep drilling and petrological core studies, there were revealed obvious shortcomings in the concepts of the origin and evolution of the Middle and South Caspian depressions. These ideas misinterpret evolution, especially the South Caspian Basin, which is characterized by a number of unique features: very thick sedimentary cover (up to 22 km), extremely high sedimentation rate, low heat flow and reservoir temperatures, abnormally high pore and reservoir pressures, high clay content of the section, etc. The main purpose of the study was to elucidate the regional structure and features of the dissection of the sedimentary cover of the Middle and South Caspian depressions, the conditions of occurrence and distribution of facies and thicknesses of individual complexes of deposits. The paper analyzes the results of some previous studies of the geological structure of the Middle and South Caspian depressions based on the data of deep seismic sounding, seismological and gravimetric observations. We consider the main conclusions of these studies, about the geological structure of the sedimentary complex of the region’s, very outdated and subject to revision. The results of seismic stratigraphic analysis of seismic data allowed the authors to identify new data about the tectonic structure and express a completely different point of view regarding the structure of the sedimentary cover in the region. The work also touches on the issue associated with the tectonics of the region and the alleged subduction zone here.

scholarly journals Combined Multiple Attenuation Methods and Geological Interpretation : Seram Sea Case Study 2D Marine Seismic Data

2019 ◽  
Vol 34 (1) ◽  
Author(s):  
Tumpal Bernhard Nainggolan ◽  
Said Muhammad Rasidin ◽  
Imam Setiadi
Keyword(s):  
Satisfactory Result ◽  
Radon Transform ◽  
Seismic Data ◽  
Thrust Belt ◽  
Geological Interpretation ◽  
Structural Style ◽  
Predictive Deconvolution ◽  
Fold And Thrust Belt ◽  
Short Period ◽  
Marine Seismic

Multiple often and always appear in marine seismic data due to very high acoustic impedance contrasts. These events have undergone more than one reflection. This causes the signal to arrive back at the receiver at an erroneous time, which, in turn, causes false results and can result in data misinterpretation. Several types of multiple suppression have been studied in literature. Methods that attenuate multiples can be classified into three broad categories: deconvolution methods; filtering methods and wavefield prediction subtraction methods. The study area is situated on Seram Sea in between 131°15’E – 132°45’E and 3°0’S – 4°0’S, Seram Trough which is located beneath Seram Sea at northern part of the Banda-Arc – Australian collision zone and currently the site of contraction between Bird’s Head and Seram. This research uses predictive deconvolution and FK-filter to attenuate short period multiple from their move out, then continued by SRME method to predict multiple that cannot be attenuated from previous method, then followed by Radon transform to attenuate multiple that still left and cannot be attenuated by SRME method. The result of each method then compared to each other to see how well multiple attenuated. Predictive deconvolution and F-K filter could not give satisfactory result especially complex area where multiple in dipping event is not periodic, SRME method successfully attenuate multiple especially in near offset multiple without need subsurface information, while SRME method fails to attenuate long offset multiple, combination of SRME method and Radon transform can give satisfactory result with careful selection of the Radon transform parameters because it can obscure some primary reflectors. Based on geological interpretation, Seram Trough is built by dominant structural style of deposited fold and thrust belt. The deposited fold and thrust belt has a complexly fault geometry from western zone until eastern of seismic line.

scholarly journals Study on the Velocity Analysis Method of Low SNR Seismic Data

2021 ◽  
Vol 11 (1) ◽  
pp. 78
Author(s):  
Jianbo He ◽  
Zhenyu Wang ◽  
Mingdong Zhang
Keyword(s):  
Seismic Data ◽  
Fresnel Zone ◽  
Signal To Noise Ratio ◽  
Normal Wave ◽  
Curvature Radius ◽  
Velocity Spectrum ◽  
Velocity Analysis ◽  
Signal To Noise ◽  
Noise Ratio ◽  
Zero Offset

When the signal to noise ratio of seismic data is very low, velocity spectrum focusing will be poor., the velocity model obtained by conventional velocity analysis methods is not accurate enough, which results in inaccurate migration. For the low signal noise ratio (SNR) data, this paper proposes to use partial Common Reflection Surface (CRS) stack to build CRS gathers, making full use of all of the reflection information of the first Fresnel zone, and improves the signal to noise ratio of pre-stack gathers by increasing the number of folds. In consideration of the CRS parameters of the zero-offset rays emitted angle and normal wave front curvature radius are searched on zero offset profile, we use ellipse evolving stacking to improve the zero offset section quality, in order to improve the reliability of CRS parameters. After CRS gathers are obtained, we use principal component analysis (PCA) approach to do velocity analysis, which improves the noise immunity of velocity analysis. Models and actual data results demonstrate the effectiveness of this method.

A 108km2 Compressive Sensing Processing Trial

2021 ◽  
Author(s):  
Dustin Blymyer ◽  
Klaas Koster ◽  
Graeme Warren
Keyword(s):  
Compressive Sensing ◽  
Surface Waves ◽  
Seismic Data ◽  
High Frequency ◽  
Quality Data ◽  
Low Velocity ◽  
Conventional Design ◽  
Seismic Acquisition ◽  
Similar Cost ◽  
Station Density

Abstract Summary Compressive sensing (CS) of seismic data is a new style of seismic acquisition whereby the data are recorded on a pseudorandom grid rather than along densely sampled lines in a conventional design. A CS design with a similar station density will generally yield better quality data at a similar cost compared to a conventional design, whereas a CS design with a lower station density will reduce costs while retaining quality. Previous authors (Mosher, 2014) have shown good results from CS surveys using proprietary methods for the design and processing. In this paper we show results obtained using commercially available services based on published algorithms (Lopez, 2016). This is a necessary requirement for adoption of CS by our industry. This report documents the results of a 108km2 CS acquisition and processing trial. The acquisition and processing were specifically designed to establish whether CS can be used for suppression of backscattered, low velocity, high frequency surface waves. We demonstrate that CS data can be reconstructed by a commercial contractor and that the suppression of backscattered surface waves is improved by using CS receiver gathers reconstructed to a dense shot grid. We also show that CS acquisition is a reliable alternative to conventional acquisition from which high-quality subsurface images can be formed.

Sign in / Sign up

Export Citation Format

Share Document