Effect of growth path on carcass and meat-quality traits of Hereford steers finished on pasture or in feedlot

2020 ◽  
Vol 60 (2) ◽  
pp. 323 ◽  
Author(s):  
Adrielle Matias Ferrinho ◽  
Elisa Peripolli ◽  
Georgget Banchero ◽  
Angélica Simone Cravo Pereira ◽  
Gustavo Brito ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Growth Period ◽  
Carcass Weight ◽  
Winter Period ◽  
Average Weight ◽  
Quality Traits ◽  
Marbling Score ◽  
Mean Values ◽  
Finishing Cattle ◽  
Retail Cuts

The objective of this study was to evaluate the effect of nutritional management during rearing and finishing phases on beef fatty acid composition, and carcass and beef quality traits of Hereford cattle. The study used 240 castrated male calves weaned at 8 months of age, and with an average weight of 170 ± 17 kg. After weaning, the experiment was divided in to three phases in a 4 × 2 factorial design: a 93-day winter period with four treatment groups (on pasture or in feedlot and at high or low feeding levels); a 196-day compensatory-growth phase on pasture; and a finishing phase either on pasture or in feedlot. Animals were slaughtered when each group attained a mean liveweight of 500 kg. The winter growth × finishing management interaction significantly affected hot carcass weight (P = 0.0029). There was no differences observed for feedlot-finished steers, but for pasture-finished steers, those pasture-reared had higher hot carcass weight (kg) than those feedlot-reared (low pasture 256.30 ± 1.60, high pasture 253.72 ± 1.60, low feedlot 249.85 ± 1.66, high feedlot 247.60 ± 1.62). Feedlot-finished steers showed higher (P < 0.05) mean values than pasture-finished steers for ribeye area (55.61 ± 0.69 cm2 vs 53.18 cm2), backfat thickness (8.62 ± 0.32 mm vs 6.21 mm), marbling score (237.97 ± 13.06 vs 171.70) and final pH (5.53 ± 0.02 vs 5.48). Additionally, feedlot-finished steers raised in feedlot during the winter-growth period displayed the heaviest hindquarter cuts. Meat from pasture-finished steers had lower (P < 0.05) shear-force values than from feedlot-finished cattle (2.95 ± 0.18 vs 3.66 ± 0.17 kg), and when reared on either high or low pasture during winter-growth, they showed the highest (P < 0.05) conjugated linoleic acid (cis-9, trans-11) and n-3 polyunsaturated fatty acid concentrations. In conclusion, growing and finishing cattle on pasture improved the carcass yield of retail cuts because of low fat concentration, and improved the nutritional and health value of the beef fatty acid profile.

scholarly journals Characterizing Pork Quality of Carcasses with an Average Weight of 119 Kg

2019 ◽  
Vol 3 (2) ◽  
Author(s):  
H. Price ◽  
A. B. Lerner ◽  
E. A. Rice ◽  
J. E. Lowell ◽  
B. N. Harsh ◽  
...  
Keyword(s):  
Iodine Value ◽  
Total Population ◽  
Fiber Type ◽  
Carcass Weight ◽  
Average Weight ◽  
Pork Quality ◽  
Quality Traits ◽  
Quality Measurements

ObjectivesBetween 1995 and 2018, average hot carcass weight of U.S. pork carcasses increased from 82 kg to 96 kg, which is an increase of approximately 17%. At current rates, pork carcasses in the U.S. will weigh on average, 105 kg by the year 2030 and over 118 kg by 2050. Although this represents an increase in throughput efficiency due to increases in economy of scale, projecting continued increases in the future raises some concerns. Therefore, the objective was to characterize pork quality of carcasses ranging from 78 to 145 kg with a mean weight of 119 kg.Materials and MethodsCarcass composition, such as hot carcass weight (HCW), back fat depth and loin depth were measured on 666 carcasses. Additionally, loin quality measurements, such as pH, loin instrumental and visual color, and iodine value of clear plate fat were measured on approximately 90% of the total population. Ham quality, 14 d aged loin and chop quality measurements, and loin chop slice shear force (SSF) were evaluated on approximately 30% of the total population. Finally, myosin heavy chain fiber type determination was completed on approximately 50 carcasses selected from carcasses ranging from 97 to 133 kg. The slope of regression lines and coefficients of determination between hot carcass weights and quality traits were calculated using the REG procedure in SAS and considered significantly different from 0 at P ≤ 0.05.ResultsAs HCW increased loin depth (b1 = 0.2496, P < 0.0001), back fat depth (b1 = 0.1374, P < 0.0001), loin weight (b1 = 0.0345, P < 0.0001), chop weight (b1 = 1.6626, P < 0.0001), and ham weight (b1 = 0.1044, P < 0.0001) increased. There was a decrease in estimated lean (b1 = –0.0751, P < 0.0001) and iodine value (b1 = –0.0923, P < 0.0001) as carcass weight increased, however, HCW only accounted for ≤ 24% (R2 = 0.24) of the variation in estimated lean and iodine value. Additionally, there were no significant differences in gluteus medius pH (b1 = 0.0009, P = 0.30) or instrumental lightness (b1 = 0.0301, P = 0.15), redness (b1 = –0.0036, P = 0.73) or yellowness (b1 = 0.0058, P = 0.57) of the ham as carcass weight increased. As carcass weight increased, 1 d loin instrumental yellowness (b*) increased (b1 = 0.0092 P < 0.01), however HCW only explained 1% of the variation in b*. Heavier carcasses were more tender (decreased SSF of chops cooked to 71°C, (b1 = –0.0674, P < 0.0001), although HCW only explained 9% of the variation in SSF. Total cook loss of chops used for SSF determination decreased as HCW increased (b1 = –0.0512, P < 0.0001), and HCW explained 15% (R2 = 0.15) of the variation in total cook loss. There were no significant differences in fiber type percentage, type 1 (b1 = –0.0170, P = 0.81), 2a (b1 = –0.0786, P = 0.23), 2x (b1 = –0.0201, P = 0.80), or 2b (b1 = 0.1224, P = 0.37), or fiber type area, type 1 (b1 = –26.6331, P = 0.22), 2a (b1 = –40.7257, P = 0.07), 2x (b1 = –46.9459, P = 0.25), or 2b (b1 = –26.2537, P = 0.38) as HCW increased.ConclusionDue to the lack of variation explained by HCW (≤ 15%), pork quality traits are not expected to be compromised as HCW continues to increase. The results suggest that increasing HCW to 119 kg did not have detrimental effects on pork quality attributes.

scholarly journals Analysis of Growth Intensity and Carcass Characteristics of Wagyu‑Aberdeen Angus Crossbred Steers

2018 ◽  
Vol 66 (4) ◽  
pp. 897-903 ◽  
Author(s):  
Renáta Toušová ◽  
Jaromír Ducháček ◽  
Matúš Gašparík ◽  
Martin Ptáček ◽  
Lubor Kitzler
Keyword(s):  
Carcass Characteristics ◽  
Mean Value ◽  
Carcass Weight ◽  
Average Weight ◽  
Marbling Score ◽  
Average Value ◽  
Dressing Percentage ◽  
Beef Marbling ◽  
Growth Ability ◽  
Carcass Cuts

The aim of this study was to evaluate growth ability (weight, daily weight gains) and selected carcass characteristics during fattening period of Wagyu × Aberdeen Angus crossbred steers (F1). A total of 72 animals were evaluated over a period of 4 years. The observed animals were monitored from rearing (8 months) to slaughter (30 months). Statistical evaluation was performed by SAS 9.3 (GLM procedure); variables were corrected for effects of the year, season of birth and sire effect. Sire effect proved to be the most significant in our evaluation. Offsprings sired by Bull 1 had significantly (P < 0.05) better growth ability than offsprings of other two tested bulls. Slaughter analysis of tested steers showed, that mean value of dressing percentage was 55.61 %. Significantly highest dressing percentage was found for Bull 1 offsprings (56.72 %, P < 0.05). The average carcass weight of tested steers was 443.46 kg and the highest carcass weight was again achieved by offsprings of Bull 1 (486.39 kg; P < 0.05). Average value of beef marbling score was 5.21. Slaughter analyses of carcass cuts (cut‑out, round, chuck, rump, tenderloin, shank, flank) and tallow showed that average weight of these lean cuts was 127.32 kg and tallow content was 39.31 kg at average. The highest values of these parameters were observed in offspring of bulls Bull 1 (P < 0.05).

An assessment of sire-breed effects on carcass and meat quality traits of lambs at the ages of 40 and 100 days from Comisana ewes crossed with Suffolk or Bergamasca rams

2018 ◽  
Vol 58 (10) ◽  
pp. 1794 ◽  
Author(s):  
Pasquale De Palo ◽  
Aristide Maggiolino ◽  
Pasquale Centoducati ◽  
Giovanna Calzaretti ◽  
Edmondo Ceci ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Meat Quality ◽  
Saturated Fatty Acid ◽  
Carcass Weight ◽  
Meat Production ◽  
Quality Traits ◽  
Breed Group ◽  
Sire Breed ◽  
Dairy Breed ◽  
Intramuscular Fat Content

The aim was to compare lambs at two different ages at slaughter (40 vs 100 days) and three breeds or crossbreeds including an Italian dairy breed (Comisana (Com)) and its crosses with the two meat breeds of Bergamasca (Ber × Com) and Suffolk (Suf × Com) with 20 male lambs per age per breed group. At both slaughter ages, crossbreeds were more productive, with higher liveweight (P = 0.02), carcass weight (P = 0.03) and dressing percentage (P = 0.04) than the Com group. Meat from the younger lambs showed lower C10:0, C14:0 and C22:0 (P < 0.05) and higher C18:1 (P < 0.01) concentrations, resulting in higher monounsaturated fatty acid (P < 0.01) and lower saturated fatty acid (P < 0.01) content. Moreover, their meat has lower redness (a*), yellowness (b*) and chroma (C*) values (P < 0.01). Crossbreeding dairy breed ewes with sires of high meat production breeds improves liveweight and carcass weight. Meat from younger lambs had lower intramuscular fat content and higher concentrations of polyunsaturated fatty acid.

FEATURES OF THE OIL-BEARING-CROP (CHARTHAMUS) CULTIVATION UNDER THE CONTRASTIVE EDAPHIC-CLIMATIC CONDITIONS

2018 ◽  
pp. 31-37
Author(s):  
S. К. Temirbekova ◽  
Yu. V. Afanaseva ◽  
I. M. Kulikov ◽  
G. V. Metlina ◽  
S. A. Vasilchenko
Keyword(s):  
Fatty Acid Composition ◽  
Fatty Acid ◽  
Linoleic Acid ◽  
Acid Composition ◽  
Oil Content ◽  
Moscow Region ◽  
Average Weight ◽  
North Caucasus ◽  
Saratov Region ◽  
Rostov Region

The results of long-term studies of the biological, morphological and phenological features of the introduced new culture of safflower in the Central, Volga and North Caucasus regions are presented. Optimum parameters of depth of seeding (5-6 cm), seeding rates (300-350 thousand pieces/hectare or 12-14 kg), ensuring high productivity, oil content and quality of seeds are established. For the first time, the relationship between moisture availability of vegetation periods with accumulation of oil content and a change in the fatty acid composition was established. Oilseed (in untreated seeds) in the regions was from 14,5 to 31,2%, in excessively wet 2013 – 6,4% in the Moscow region and 8,6% in the Saratov region. Fatty acid composition revealed a high content of oleic acid in Krasa Stupinskaya variety – 13,6-16,8%, linoleic acid – 68,5-75,7%. The yield of oil in the Moscow region was 240 kg/ha. The yield of Krasa Stupinskaya in the Moscow Region was 0,6 t/ha, the Rostov Region 0,8 t/ha and Saratov Region 1,2 t/ha, with an average weight of 1000 seeds, respectively, by regions: 40,0 g, 47,3 g and 40,9 g. The growing season for growing seeds was 105 days in the Moscow Region, 94 days in the Rostov Region and 95 days in the Saratov Region. It has been established that excessive moistening during the flowering and seed filling period increases the harmfulness of enzyme-mycosis seed depletion (EMIS) – biological injury during maturation (enzymatic stage), followed by the seeding of the seeds with the phytopathogen Alternaria carthami Chowdhury. In the breeding programs for productivity and oil content, it is recommended to use the varieties Moldir (Kazakhstan) and Krasa Stupinskaya (FGBNU VSTISP), the fatty acid composition of which is characterized by an increased content of oleic and linoleic acid, which is of particular value for storage and use for food purposes.

Proximate Chemical Analysis, Fatty Acid Profile and Microstructural Characteristics of Dromedary Camel Fats (Hump, Renal and Mesentery)

2020 ◽  
Keyword(s):  
Fatty Acid ◽  
Fatty Acid Profile ◽  
Meat Product ◽  
Oxidation Stability ◽  
Meat Products ◽  
Raw Material ◽  
Dromedary Camel ◽  
Mean Values ◽  
Animal Fat ◽  
Mesenteric Fat

The quality, safety, and suitability of animal fat for processing of a specific meat product is a critical issue. Increasing the human awareness about the health aspects associated with increased intake of animal fat, makes camel fat a suitable raw material for meat processing due to its excellent nutritional contribution. Therefore, the target of this study is examination of the sensory, physicochemical, fat oxidation, fatty acid profile, and other quality parameters of camel fat to evaluate the feasibility for processing of different meat products. To achieve this goal, 30 fat samples each from the hump, renal, and mesentery of Arabian male camels were investigated. The results showed that both the renal and mesenteric fat had honey color and medium-soft texture, while the hump had greyish-white color and hard texture. The sensory panel scores were significantly different between the hump and other fats. Hump fat had significantly (P<0.05) higher moisture, protein, and collagen content, while higher fat content was recorded in mesenteric fat. The fatty acid analysis showed that hump had high SFA and very low PUFA in comparison with both renal and mesenteric fat. Camel fat had high oxidation stability, and the mean values were very low in comparison with the levels of quality and acceptability. The ultrastructural analysis showed that hump fat had high elastin fibers which increase its hardness. The results indicated that both renal and mesenteric fat were more suitable for the production of various meat products than the hump.

Fatty acid profilies and some meat quality traits at different slaughter weights of Brown Swiss bulls

2021 ◽  
Vol 53 (3) ◽  
Author(s):  
Aziz Şahin ◽  
Yüksel Aksoy ◽  
Emre Uğurlutepe ◽  
Ertuğrul Kul ◽  
Zafer Ulutaş
Keyword(s):  
Fatty Acid ◽  
Meat Quality ◽  
Quality Traits ◽  
Brown Swiss ◽  
Meat Quality Traits

scholarly journals 5 Evaluating Finishing Performance of Cattle Fed HMC:SFC Blends with Modified Distillers Grains

2020 ◽  
Vol 98 (Supplement_3) ◽  
pp. 127-128
Author(s):  
Braden Troyer ◽  
Zac Carlson ◽  
Levi J McPhillips ◽  
Andrea K Watson ◽  
James C MacDonald ◽  
...  
Keyword(s):  
Average Daily Gain ◽  
Distillers Grains ◽  
Experimental Unit ◽  
Marbling Score ◽  
Finishing Cattle ◽  
Finishing Diets ◽  
Randomized Design ◽  
Gate System ◽  
Improved Performance ◽  
Extension Center

Abstract Steam-flaked corn (SFC) has been widely used in feedlots in the southern United States to improve feed efficiency (G:F) by increasing starch digestibility. Similarly, feedlots in the Midwest have commonly fed high moisture corn (HMC), both to ensure corn supply for the year and to improve G:F. However, popularity of SFC in the Midwest is on the rise, but producers still recognize the benefits of HMC utilization. A study was conducted at the Eastern Nebraska Research and Extension Center (ENREC) to compare finishing cattle performance when fed HMC, SFC, or a blend. The objective was to determine the optimum inclusion of the grains when modified distillers grains (MDGS) was included at 20% of the diet. This study utilized 90 yearling steers (353 kg; SD=5.8 kg) individually fed using the Calan gate system in a completely randomized design with cattle stratified by body weight (BW). Treatments included: 100% HMC, 75% HMC blended with 25% SFC, a 50% blend of the grains, 25% HMC blended with 75% SFC, or 100% SFC (DM basis; % of the 70% grain in the diet). Cattle were on feed 168 days with 3-day initial BW and 1 day final BW. Animal was the experimental unit with 18 replications per treatment. No differences in initial BW, ribeye area, or marbling score between treatments were detected (P &gt; 0.12). Ending BW, hot carcass weight, average daily gain, and G:F all linearly increased with increasing inclusion of SFC in the diet (P &lt; 0.05). Carcass adjusted G:F improved from 0.158 to 0.170 for 100% HMC compared to 100% SFC diets, respectively. In conclusion, feeding higher inclusions of SFC in finishing diets resulted in improved performance compared to HMC in diets containing 20% MDGS.

Sign in / Sign up

Export Citation Format

Share Document