Eucalypt phytoglyphs: The micronanatomical features of the epidermis in relation to taxonomy

1971 ◽  
Vol 19 (2) ◽  
pp. 173 ◽  
Author(s):  
SGM Carr ◽  
L Milkovits ◽  
DJ Carr

The eucalypt leaf contains a store of untapped information of potentially great value taxonomic and evututionary studies. Tie cuticie of certain eucalypts is shown to possess a complex and species-specific ornamentation so distinctive that its features can be regarded as diagnostic. The term "phytoglyph" is coined for the constellation of microanatomical features of the surfaces of leaves, including the microanatomy of the cuticle. Phytoglyphic analysis relates to the combination of three methods, light microscopy of stained cuticles, scanning electron microscopy of leaf surfaces, and light microscopy of thin sections of the cuticular and associated structures. Its use is illustrated by the dissection of the "form species" E. dichromophloia into a number of separate and recognizable entities, some of which were previously accorded the status of species. The plant geographical and other implications of this dissection are dealt with. In particular, E. dichromophloia F. Muell. is to be regarded as a species of very restricted distribution. The microanatomical characters of the cuticle are closely controlled products of the epidermal layers. The fact that specimens which (on other grounds) can be grouped together as a species have identical cuticular microanatomy suggests that the phytoglyph is genetically strongly determined and does not consist of inadvertent, trivial surface features with a high degree of plasticity. This in turn raises the problem of the development of the cuticular microanatomy which cannot be explained on current views of the formation of the cuticle by passive diffusion of precursor substances through the epidermal walls, followed by a hardening process.

Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).


2000 ◽  
Vol 6 (S2) ◽  
pp. 872-873
Author(s):  
James R. Rosowski ◽  
Terry L. Bartels ◽  
James F. Colburn ◽  
Jannell L. Colton ◽  
Denton Belk ◽  
...  

Tadpole shrimp inhabit temporary freshwater pools and ponds where their occurrence is largely regulated by rainfall events and water temperature. When dry basins are flooded, cysts of Triops imbibe water and hatch to produce rapidly growing, carapaced larvae. While previous studies show anostracan (fairy shrimp) cyst-surface morphology often species specific, few studies illustrate shell ultrastructure of Triops and none has considered T. longicaudatus. Here we examine the shell of T. longicaudatus (Notostraca) and compare its fine structure to other species of Triops and to that of Artemiafranciscana(Anostraca), which we previously studied.Cysts, produced in culture from Utah broodstock, were purchased from Triops, Inc., 1924 Creighton Rd., Pensacola, FL 32504. Thin sections of cysts were prepared for transmission electron microscopy (TEM) as previously described (Fig. 1). Cysts were also examined with scanning electron microscopy (SEM), dry, whole or fractured (Figs. 2,3), or after imbibition and/or hatching in oxygen saturated, double-distilled water, at 25 ° C.


2017 ◽  
Vol 31 (4) ◽  
pp. 363 ◽  
Author(s):  
Jeremy Hübner ◽  
Philipp Wagner ◽  
Tobias Lehmann ◽  
Roland R. Melzer

We used scanning electron microscopy (SEM) to establish species-specific sets of characters for protonymphon larvae of two representatives of the ‘patagonica’ species group of Pallenopsis, P. patagonica and P. yepayekae. The larvae of both species are ‘typical’ protonymphon larvae sensu Bain (2003). Despite the close relationship of the two species, we observed numerous features that allow for differential diagnosis, e.g. general habitus, the number, arrangement and branching type of setules, the armature of the movable and immovable chelifore fingers, and the shape of the dactylus and setules of appendages II and III. SEM is particularly suitable for visualising these features. Our results further support the idea that protonymphon larvae can be identified to species level when adequate imaging techniques are used, as is also the case for larvae of other arthropods. Moreover, the status of the two studied species of Pallenopsis is fully supported by protonymphon larval morphology.


2019 ◽  
Vol 2 (2) ◽  
pp. 69-72
Author(s):  
László P. Biró ◽  
Krisztián Kertész ◽  
Gábor Piszter ◽  
Zsolt E. Horváth ◽  
Zsolt Bálint

Abstract The photonic nanoarchitectures occurring in the wing scales of Lycaenid butterflies were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV-VIS spectroscopy. We found that the males of all the nine investigated species possess photonic nanoarchitectures built according to the same general “plan”, but each species exhibits species-specific features which results in species-specific colours reproduced generation by generation with a high degree of accuracy.


Author(s):  
D. Johnson ◽  
P. Moriearty

Since several species of Schistosoma, or blood fluke, parasitize man, these trematodes have been subjected to extensive study. Light microscopy and conventional electron microscopy have yielded much information about the morphology of the various stages; however, scanning electron microscopy has been little utilized for this purpose. As the figures demonstrate, scanning microscopy is particularly helpful in studying at high resolution characteristics of surface structure, which are important in determining host-parasite relationships.


Author(s):  
D.R. Hill ◽  
J.R. McCurry ◽  
L.P. Elliott ◽  
G. Howard

Germination of Euonymous americanus in the laboratory has previously been unsuccessful. Ability to germinate Euonymous americanus. commonly known as the american strawberry bush, is important in that it represents a valuable food source for the white-tailed deer. Utilizing the knowledge that its seeds spend a period of time in the rumin fluid of deer during their dormant stage, we were successful in initiating germination. After a three month drying period, the seeds were placed in 25 ml of buffered rumin fluid, pH 8 at 40°C for 48 hrs anaerobically. They were then allowed to dry at room temperature for 24 hrs, placed on moistened filter paper and enclosed within an environmental chamber. Approximately four weeks later germination was detected and verified by scanning electron microscopy; light microscopy provided inadequate resolution. An important point to note in this procedure is that scarification, which was thought to be vital for germination, proved to be unnecessary for successful germination to occur. It is believed that germination was propagated by the secretion of enzymes or prescence of acids produced by microorganisms found in the rumin fluid since sterilized rumin failed to bring about germination.


2009 ◽  
Vol 18 (2) ◽  
pp. 191-195
Author(s):  
E.V. Soldatenko

The radula morphology and the anatomy of the copulatory apparatus in Kolhymorbis angarensis were examined using light microscopy, scanning electron microscopy (SEM) and histological methods. Kolhymorbis angarensis was shown to have the stylet and the penial sac with a glandular appendage (flagellum), the characteristics, previously unknown for any species of this genus. The significance of these findings for the taxonomy of the genus is discussed.


1984 ◽  
Vol 32 (5) ◽  
pp. 561 ◽  
Author(s):  
PY Ladiges

The trichomes of Angophora and Eucalyptus are illustrated from scanning electron microscopy and light microscopy, and evolutionary trends are discussed. Bristle glands of Angophora and Eucalyptus subgen. Blakella and Corymbia are emergent oil glands of varying lengths. Emergent oil glands occur in all other Eucalyptus subgenera but they are most conspicuous in Blakella, Corymbia and Angophora, in which they are characterized by four cap cells each ornamented with micropapillae. Hairs in Angophora are unique, being multicellular; they are also uniseriate and scattered on the epidermis. In contrast, hairs in Eucalyptus are simple extensions, short or long, of the cells on the sides of or the cap cells of the emergent oil glands, and they are not homologous with those of Angophora. Eucalyptus setosa (subgen. Blakella) and E. brockwayi (subgen. Symphyomyrtus) are two exceptions, having unicellular hairs on the epidermis, not associated with oil glands. It is suggested that this is an ancestral condition (or secondary reversal to it).


Phytotaxa ◽  
2021 ◽  
Vol 502 (2) ◽  
pp. 191-207
Author(s):  
SHIVANI KASHYAP ◽  
CHANDAN KUMAR SAHU ◽  
ROHIT KUMAR VERMA ◽  
LAL BABU CHAUDHARY

Due to large size and enormous morphological plasticity, the taxonomy of the genus Astragalus is very complex and challenging. The identification and grouping of species chiefly based on macromorphological characters become sometimes difficult in the genus. In the present study, the micromorphology of the seeds of 30 species belonging to 14 sections of Astragalus from India has been examined applying scanning electron microscopy (SEM) along with light microscopy (LM) to evaluate their role in identification and classification. Attention was paid to colour, shape, size and surface of seeds. The overall size of the seeds ranges from 1.5–3.2 × 0.8–2.2 mm. The shape of the seeds is cordiform, deltoid, mitiform, orbicular, ovoid and reniform. The colour of seeds varies from brown to blackish-brown to black. Papillose, reticulate, ribbed, rugulate and stellate patterns were observed on the seed coat surface (spermoderm) among different species. The study reveals that the seed coat ornamentations have evolved differently among species and do not support the subgeneric and sectional divisions of the genus. However, they add an additional feature to the individual species, which may help in identification in combination with other macro-morphological features.


2018 ◽  
Vol 484 (1) ◽  
pp. 189-204 ◽  
Author(s):  
R. H. Worden ◽  
James E. P. Utley ◽  
Alan R. Butcher ◽  
J. Griffiths ◽  
L. J. Wooldridge ◽  
...  

AbstractChlorite is a key mineral in the control of reservoir quality in many siliciclastic rocks. In deeply buried reservoirs, chlorite coats on sand grains prevent the growth of quartz cements and lead to anomalously good reservoir quality. By contrast, an excess of chlorite – for example, in clay-rich siltstone and sandstone – leads to blocked pore throats and very low permeability. Determining which compositional type is present, how it occurs spatially, and quantifying the many and varied habits of chlorite that are of commercial importance remains a challenge. With the advent of automated techniques based on scanning electron microscopy (SEM), it is possible to provide instant phase identification and mapping of entire thin sections of rock. The resulting quantitative mineralogy and rock fabric data can be compared with well logs and core analysis data. We present here a completely novel Quantitative Evaluation of Minerals by SCANning electron microscopy (QEMSCAN®) SEM–energy-dispersive spectrometry (EDS) methodology to differentiate, quantify and image 11 different compositional types of chlorite based on Fe : Mg ratios using thin sections of rocks and grain mounts of cuttings or loose sediment. No other analytical technique, or combination of techniques, is capable of easily quantifying and imaging different compositional types of chlorite. Here we present examples of chlorite from seven different geological settings analysed using QEMSCAN® SEM–EDS. By illustrating the reliability of identification under automated analysis, and the ability to capture realistic textures in a fully digital format, we can clearly visualize the various forms of chlorite. This new approach has led to the creation of a digital chlorite library, in which we have co-registered optical and SEM-based images, and validated the mineral identification with complimentary techniques such as X-ray diffraction. This new methodology will be of interest and use to all those concerned with the identification and formation of chlorite in sandstones and the effects that diagenetic chlorite growth may have had on reservoir quality. The same approach may be adopted for other minerals (e.g. carbonates) with major element compositional variability that may influence the porosity and permeability of sandstone reservoirs.


Sign in / Sign up

Export Citation Format

Share Document