Self-Incompatibility, Protandry, Pollen Production and Pollen Longevity in Banksia menziesii

1991 ◽  
Vol 39 (5) ◽  
pp. 497 ◽  
Author(s):  
M Ramsey ◽  
G Vaughton

Controlled self- and cross-pollination indicated that a natural population of Banksia menziesii (Proteaceae) was self-incompatible. Flowers were protandrous. Deposition of pollen into the stigmatic cavity was regulated by opening of the stigmatic groove. Stigmatic grooves opened 24-48 h after the flowers opened. Pollen production was high and the pollen:ovule ratio was approximately 10000. Over 90% of pollen grains were viable when flowers first opened. Viability decreased rapidly with time and most pollen was inviable within 24 h. These results indicate that B. menziesii requires pollen vectors to produce seed and suggest that pollinators may have influenced the evolution of the reproductive traits that were examined.

Author(s):  
M. Ontivero ◽  
S. Radice ◽  
E. Giordani ◽  
E. Bellini

The low productivity in the Japanese plum (Prunus salicina Lindl) is related with self-incompatibility characteristics, so other species or varieties that act as pollinators need to be present to improve fruit production. The objective of this work was to study the efficiency of pollination in different genotypes of P. salicina using treatments of natural self-pollination, cross-pollination with P. armeniaca cv. Giada and open pollination. These treatments were evaluated through viability techniques and in vitro and in vivo germination of pollen grains; the growth of pollen tubes along the pistil was also observed. Genotypes used in this study showed differences for each one of the pollination treatments. Some genotypes showed signs of self-sterility and interincompatibility with P. armeniaca cv. Giada, while others showed partial self-fertility characteristics or pseudocompatibility. Moreover, some genotypes showed a higher affinity coefficient with cv. Giada and these will be indicating a possible intercompatibility. These studies will be an important contribution breeding and selection of intra and intercompatible genotypes to be used in commercial orchards.


2020 ◽  
Vol 43 ◽  
pp. e44062
Author(s):  
Maria Lorraine Fonseca Oliveira ◽  
Telma Nair Santana Pereira ◽  
Rodrigo Miranda Barbosa ◽  
Alexandre Pio Viana

This research aimed to explore the reproductive characteristics of three species of Psidium (P. guajava L., P. cattleyanum Sabine, and P. guineense Sw.) and estimate a probable reproduction strategy based on the pollen:ovule (P:O) methodology. The number of pollen grains per floral bud (NGPB), number of pollen grains per anther (NGPA), number of anthers per flower bud (NAB), number of ovules per flower bud (NOB), and the P:O ratio of each species were estimated. All species had a P:O ratio over 2,000 and were classified as xenogamous. P.guajava presented the highest values for all characteristics evaluated, with the NGPB at 3,777,519, the NOB at 584.50 and a P:O ratio of 6,462.82. Similarly, P. cattleyanum had a P:O ratio of 5,649.89 (NGPB 762,736 and NOB 135). However, P. guineense was considered facultative xenogamous, with P:O of 2,085.75, the NGPB at 741,484 and the NOB at 355.50. Thus, it was concluded that the studied species have a preference for allogamy and require many pollen grains to fertilize each ovule, demonstrating that the transfer of pollen to the stigma is not very specialized.


1972 ◽  
Vol 52 (4) ◽  
pp. 569-574 ◽  
Author(s):  
K. C. YEUNG ◽  
E. N. LARTER

A study of the pollen production properties of three hexaploid triticale strains (Triticale hexaploide Lart.) showed that their anther length was significantly greater than that of wheat anthers (Triticum aestivum L. em Thell.) and the estimated number of pollen grains per anther ranged from 15,000 to 21,000. In comparison, a total of 8000 grains per anther was estimated for wheat, cult Manitou. Eighty-nine percent anther extrusion occurred in triticale cult Rosner, while Manitou averaged 70% anther extrusion. The period of anthesis of triticale varied according to strain but generally was of longer duration than in Manitou and thereby promoted outcrossing. Using a triticale strain carrying a dominant marker gene, 50% seed-set was obtained at a distance of 12 m leeward of the pollen source; however, a small percentage was still obtained at a distance of 30 m. It would appear from the limited number of triticales used in this study that a wide range of variability exists within this species in its pollen production and disseminating properties. With appropriate selection pressures, strains with an outbreeding habit could be developed for the purpose of hybrid seed production.


Genes ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 432
Author(s):  
Yaling Chen ◽  
Benchang Hu ◽  
Fantao Zhang ◽  
Xiangdong Luo ◽  
Jiankun Xie

Dendrobium officinale is a rare and traditional medicinal plant with high pharmacological and nutritional value. The self-incompatibility mechanism of D. officinale reproductive isolation was formed in the long-term evolution process, but intraspecific hybridization of different germplasm resources leads to a large gap in the yield, quality, and medicinal value of D. officinale. To investigate the biological mechanism of self-incompatibility in D. officinale, cytological observation and the transcriptome analysis was carried out on the samples of self-pollination and cross-pollination in D. officinale. Results for self-pollination showed that the pollen tubes could grow in the style at 2 h, but most of pollen tubes stopped growing at 4 h, while a large number of cross-pollinated pollen tubes grew along the placental space to the base of ovary, indicating that the self-incompatibility of D. officinale may be gametophyte self-incompatibility. A total of 63.41 G basesum of D. officinale style samples from non-pollinated, self-pollination, and cross-pollination by RNA-seq were obtained, and a total of 1944, 1758, and 475 differentially expressed genes (DEGs) in the comparison of CK (non-pollinated) vs. HF (cross-pollination sample), CK vs. SF (self-pollination sample) and SF vs. HF were identified, respectively. Forty-one candidate genes related to self-incompatibility were found by function annotation of DEGs, including 6 Ca2+ signal genes, 4 armed repeat containing (ARC) related genes, 11 S-locus receptor kinase (SRK) related genes, 2 Exo70 family genes, 9 ubiquitin related genes, 1 fatty acid related gene, 6 amino acid-related genes, 1 pollen-specific leucine-rich repeat extensin-like protein (LRX) related gene and 1 lectin receptor-like kinases (RLKs) related gene, showed that self-incompatibility mechanism of D. officinale involves the interaction of multiple genes and pathways. The results can provide a basis for the study of the self-incompatibility mechanism of D. officinale, and provide ideas for the preservation and utilization of high-quality resources of D. officinale.


1973 ◽  
Vol 184 (1075) ◽  
pp. 149-165 ◽  

The tryphine that coats the pollen grains of Raphanus is tapetally synthesized and is composed of a fibro-granular and a lipidic component. The fibro-granular material is proteinaceous and is secreted by cisternae of the endoplasmic reticulum. The lipidic component is derived, mainly, from degraded elaioplasts. The fibro-granular material is applied to the pollen exine first, followed by the lipidic mass. The tryphine condenses during the final stages of pollen maturation and dries down to form a thick, highly viscous coating. The major part of the condensation appears to result from dehydration. The tryphine, extracted from the pollen by a centrifugal method and mounted in a membrane, appears to be capable of penetrating the outer layers of a stigma of the same species and, if the pollen from which it was derived is incompatible with respect to the stigma, the stimulation of the production of the callosic reaction body in a manner similar to an incompatible pollen tube. It is proposed that, in Raphanus , substances responsible for the initiation of at least two stages in the self-incompatibility system are held in the tryphine.


2021 ◽  
Vol 12 ◽  
Author(s):  
Yoon Kim ◽  
Sun-Ho Kim ◽  
Dong-Min Shin ◽  
Soo-Hwan Kim

ATBS1-INTERACTING FACTOR 2 (AIF2) is a non-DNA-binding basic-helix-loop-helix (bHLH) transcription factor. Here, we demonstrate that AIF2 negatively modulates brassinosteroid (BR)-induced, BRASSINAZOLE RESISTANT 1 (BZR1)-mediated pollen and seed formation. AIF2-overexpressing Arabidopsis plants (AIF2ox) showed defective pollen grains and seed production while two AIF2 knockout mutants, aif2-1 and aif2-1/aif4-1, displayed opposite phenotypes. Genes encoding BZR1-regulated positive factors of seed size determination (SHB1, IKU1, MINI3) were suppressed in AIF2ox and genes for negative factors (AP2 and ARF2) were enhanced. Surprisingly, BZR1-regulated pollen genes such as SPL, MS1, and TDF1 were aberrantly up-regulated in AIF2ox plants. This stage-independent abnormal expression may lead to a retarded and defective progression of microsporogenesis, producing abnormal tetrad microspores and pollen grains with less-effective pollen tube germination. Auxin plays important roles in proper development of flower and seeds: genes for auxin biosynthesis such as TCPs and YUCCAs as well as for positive auxin signalling such as ARFs were suppressed in AIF2ox flowers. Moreover, lipid biosynthesis- and sucrose transport-related genes were repressed, resulting in impaired starch accumulation. Contrarily, sucrose and BR repressed ectopic accumulation of AIF2, thereby increasing silique length and the number of seeds. Taken together, we propose that AIF2 is negatively involved in pollen development and seed formation, and that sucrose- and BR-induced repression of AIF2 positively promotes pollen production and seed formation in Arabidopsis.


2013 ◽  
Vol 57 (2) ◽  
pp. 103-115 ◽  
Author(s):  
Ernest Stawiarz ◽  
Anna Wróblewska

Abstract A study on the flowering biology and pollen production of the common laburnum (Laburnum anagyroides Med.) was conducted under the conditions of Lublin during the period 2004 - 2006. The flowering of this species began in the second 10-day period of May and lasted for 2.5 - 4 weeks. The flowers of common laburnum are borne in showy golden-yellow pendulous racemes. They develop successively, starting from the base and moving to the tip of an inflorescence. During the growing season, one shrub produces 800 to 3200 racemes, with 14 to 35 flowers in a single raceme. On average, the flowering duration for a raceme was 12.8 days and 8.7 days for a single flower. Throughout the study years, the shrubs proved to be most attractive in the third 10-day period of May when they reached full bloom. The average weight of pollen produced was 6.08 mg per 10 flowers of Laburnum anagyroides, 14.02 mg per raceme, and 26.0 g per shrub. Pollen grains reached average dimensions of 24.01 μm × 24.26 μm.


2012 ◽  
Vol 39 (12) ◽  
pp. 1009 ◽  
Author(s):  
Viola Devasirvatham ◽  
Pooran M. Gaur ◽  
Nalini Mallikarjuna ◽  
Raju N. Tokachichu ◽  
Richard M. Trethowan ◽  
...  

High temperature during the reproductive stage in chickpea (Cicer arietinum L.) is a major cause of yield loss. The objective of this research was to determine whether that variation can be explained by differences in anther and pollen development under heat stress: the effect of high temperature during the pre- and post-anthesis periods on pollen viability, pollen germination in a medium, pollen germination on the stigma, pollen tube growth and pod set in a heat-tolerant (ICCV 92944) and a heat-sensitive (ICC 5912) genotype was studied. The plants were evaluated under heat stress and non-heat stress conditions in controlled environments. High temperature stress (29/16°C to 40/25°C) was gradually applied at flowering to study pollen viability and stigma receptivity including flower production, pod set and seed number. This was compared with a non-stress treatment (27/16°C). The high temperatures reduced pod set by reducing pollen viability and pollen production per flower. The ICCV 92944 pollen was viable at 35/20°C (41% fertile) and at 40/25°C (13% fertile), whereas ICC 5912 pollen was completely sterile at 35/20°C with no in vitro germination and no germination on the stigma. However, the stigma of ICC 5912 remained receptive at 35/20°C and non-stressed pollen (27/16°C) germinated on it during reciprocal crossing. These data indicate that pollen grains were more sensitive to high temperature than the stigma in chickpea. High temperature also reduced pollen production per flower, % pollen germination, pod set and seed number.


Author(s):  
Rachel N. McInnes

Allergenic pollen is produced by the flowers of a number of trees, grasses, and weeds found throughout the world. Human exposure to such pollen grains can exacerbate pollen-related asthma and allergenic conditions such as allergic rhinitis (hay fever). While allergenic pollen comes from three main groups of plants—certain trees, grasses, and weeds—many people are sensitive to pollen from one or a few taxa only. Weather, climate, and environmental conditions have a significant impact on the levels and varieties of pollen grains present in the air. These allergenic conditions significantly reduce the quality of life of affected individuals and have been shown to have a major economic impact. Pollen production depends on both the current meteorological conditions (including day length, temperature, irradiation, precipitation, and wind speed/direction), and the water availability and other environmental and meteorological conditions experienced in the previous year. The climate affects the types of vegetation and taxa that can grow in a particular location through availability of different habitats. Land-use or land management is also crucial, and so this field of study has implications for vegetation management practices and policy. Given the influential effects of weather and climate on pollen, and the significant health impacts globally, the total effect of any future environmental and climatic changes on aeroallergen production and spread will be significant. The overall impact of climate change on pollen production and spread remains highly uncertain, and there is a need for further understanding of pollen-related health impact information. There are a number of ways air quality interacts with the impact of pollen. Further understanding of the risks of co-exposure to both pollen and air pollutants is needed to better inform public health policy. Furthermore, thunderstorms have been linked to asthma epidemics, especially during the grass pollen seasons. It is thought that allergenic pollen plays a role in this “thunderstorm asthma.” To reduce the exposure to, or impact from, pollen grains in the air, a number of adaptation and mitigation options may be adopted. Many of these would need to be done either through policy changes, or at a local or regional level, although some can be done by individuals to minimize their exposure to pollen they are sensitive to. Improved aeroallergen forecast models could be developed to provide detailed taxon-specific, localized information to the public. One challenge will be combining the many different sources of aeroallergen data that are likely to become available in future into numerical forecast systems. Examples of these potential inputs are automated observations of aeroallergens, real-time phenological observations and remote sensing of vegetation, social sensing, DNA analysis of specific aeroallergens, and data from symptom trackers or personal monitors. All of these have the potential to improve the forecasts and information available to the public.


Sign in / Sign up

Export Citation Format

Share Document