Residual value of molybdenum for wheat production on naturally acidic soils of Western Australia

2006 ◽  
Vol 46 (10) ◽  
pp. 1333 ◽  
Author(s):  
R. F. Brennan
Keyword(s):  
Grain Yield ◽  
Western Australia ◽  
Field Experiments ◽  
Relative Effectiveness ◽  
Growth Stages ◽  
Eastern Region ◽  
Residual Value ◽  
Wheat Roots ◽  
Agricultural Areas ◽  
Tissue Test

Naturally acidic sandplain soils in the lower rainfall (<350 mm annual average) eastern region of the agricultural areas of south-western Australia are deficient in molybdenum (Mo) for grain production of wheat. Liming soils ameliorates Mo deficiency, but it is not an economic option for these soils because they are naturally acidic at soil depths commonly explored by wheat roots. Consequently, Mo fertiliser, usually as Mo trioxide, needs to be applied to wheat on these soils. The residual value of the Mo fertiliser for these soils was not known, so was measured using grain yield of wheat in 2 long-term field experiments. The Mo fertiliser treatments were applied once only in different years to plots not treated with Mo in a previous year. In both experiments, the residual value of the fertiliser was measured in 1993. Thus, it was possible to determine the effectiveness of the fertiliser applied once only 1–11 years previously (previous Mo) relative to freshly applied (current) Mo applied in 1993. At both sites, a continuous decline in the effectiveness of previous Mo relative to current Mo was related to time of Mo–soil contact. In experiment 1, the effectiveness of previous Mo relative to current Mo decreased by about 40, 50, 60 and 70% when applied 2, 5, 7 and 11 years previously. In experiment 2, on a more acidic soil with a larger capacity to sorb Mo, the relative effectiveness of previous Mo decreased by about 60 and 80% for Mo applied 2 and 6 years previously. The concentration of Mo measured in youngest emerged leaf blades was related to 90% of the maximum shoot yield at the time of sampling (diagnostic critical tissue test value) and to 90% of the maximum grain yield (prognostic critical tissue test value). Irrespective of the growth stage of wheat, both critical diagnostic and prognostic values were about 0.07 mg Mo/kg. The concentration of Mo in grain that was related to 90% of the maximum grain yield was 0.02 mg/kg. The reapplication of Mo fertiliser to naturally acidic sands can be made with knowledge of the residual value and use of tissue testing for Mo, particularly when sampled at early growth stages of wheat.

Relationship between scald (Rhynchosporium secalis) and losses in grain yield of barley in Western Australia

1985 ◽  
Vol 36 (5) ◽  
pp. 655 ◽  
Author(s):  
TN Khan ◽  
MF D'Antuono
Keyword(s):  
Grain Yield ◽  
Critical Point ◽  
Western Australia ◽  
Field Experiments ◽  
Yield Loss ◽  
Growth Stages ◽  
Point Model ◽  
Percentage Yield ◽  
The Mean ◽  
Ripe Stage

The three commonly used techniques, viz. critical point model, area under the curve and multiple linear regression, were applied to study the relationship between scald infection and grain yield in field experiments conducted during 1979-1983 in Western Australia. In the preliminary analysis leaf three from the top and the mean of the top three leaves were found to be best correlated with yield. The three models did not dilfer greatly, presumably owing to the high correlations between scald at the milky ripe stage and at the earlier growth stages. The critical point model was chosen because of its simplicity. Percentage yield loss in combined data from all experiments showed a significant correlation (P < 0.001) with scald at the milky ripe stage and defined percentage yield loss in cultivars Clipper and Stirling to be about one-third of the mean scald damage on leaves 1 (flag), 2 and 3 at g.s. 75. Due to the range of trials in this analysis, it was suggested that this relationship may be applied to estimate yield loss from survey data in other parts of southern Australia, where scald is endemic.

Residual value of phosphorus from superphosphate for wheat grown on soils of contrasting texture near Esperance, Western Australia.

1986 ◽  
Vol 26 (2) ◽  
pp. 209 ◽  
Author(s):  
MDA Bolland
Keyword(s):  
Western Australia ◽  
Field Experiments ◽  
Relative Effectiveness ◽  
Yield Response ◽  
Good Prediction ◽  
Residual Value ◽  
Extractable P ◽  
P Content ◽  
P Application ◽  
Texture Contrast

The residual value for wheat of phosphorus (P) from superphosphate was measured in field experiments on two texture-contrast (duplex) soils near Esperance, Western Australia. Superphosphate was applied to previously untreated plots once only, in 1980, 198 1, 1982 or 1983. The residual value of this P was measured in 1983 relative to P applied in 1983. Results were similar for both soils. Superphosphate applied in previous years did not produce the same yield as superphosphate applied in the current year. As calculated from yield response, relative effectiveness was 65, 42 or 32% after 1, 2 and 3 years, respectively. Yield depended on P content of plant tops, and this relationship was independent of time of P application. As the period of contact of P with the soil increased, less P was taken up by the plants, and this limited yield. As calculated from the P content of plant tops, relative effectiveness was 60, 30 or 23% after 1, 2 and 3 years, respectively. The amount of P extracted from the soil by 0.5M sodium bicarbonate decreased by about 54% from day 210 to day 575 after application of superphosphate, by a further 35% from day 575 to day 940, and by 15% from day 940 to day 1305. Bicarbonate-extractable P determined on soil samples collected mid January 1983 gave a good prediction of yields measured in the spring of that year

A re-evaluation of chlormequat application to wheat in Western Australia

1986 ◽  
Vol 26 (3) ◽  
pp. 361
Author(s):  
MW Perry ◽  
DJ Miers
Keyword(s):  
Grain Yield ◽  
Western Australia ◽  
Field Experiments ◽  
Leaf Growth ◽  
Maximum Yield ◽  
Growth Stages ◽  
Time Of Application ◽  
Natural Rainfall ◽  
Application Rates ◽  
Yield Responses

The effect of chlormequat on the grain yield of wheat was investigated in 24 field experiments between 1981 and 1983. Two times of application (at the 3.5- and 6-leaf growth stages-Zadoks decimal score 13.5 and 16.0) and rates of application up to 0.75 kg/ha a.i. were tested with two chlormequat formulations, Cycocel 750 and Bettaquat. Chlormequat application reduced crop height in all trials, but crop lodging did not occur in any trial. Statistically significant yield responses to rate of application alone were obtained in only three of 24 trials, with maximum yield occurring at 0.19-0.37 kg/ha a.i. and with some indication of a yield depression at 0.75 kg/ha a.i. A significant effect of time of application was observed in only two trials, but the results conflicted. In one trial there was a significant interaction between rate and time, with a response to rate of chlormequat only at the 6-leaf stage. No differences were detected between chlormequat formulations. In individual trials, the mean grain yield from the chlormequat treatments ranged from 92.9 to 116.5% of the control. However, averaging over all trials in each year, chlormequat treatments yielded 102.5, 99.3 and 100.0% of the control, respectively, in the three years. Our results confirm that low application rates of chlormequat, applied early in crop development, can increase grain yield. However, over the 24 trials, the effects of chlormequat were too small and inconsistent to warrant its use to increase wheat grain yields under natural rainfall in south-western Australia.

Effectiveness of some copper compounds applied as foliar sprays in alleviating copper deficiency of wheat grown on copper-deficient soils of Western Australia

1990 ◽  
Vol 30 (5) ◽  
pp. 687 ◽  
Author(s):  
RF Brennan
Keyword(s):  
Grain Yield ◽  
Western Australia ◽  
Copper Deficiency ◽  
Relative Effectiveness ◽  
Grain Yields ◽  
Foliar Sprays ◽  
Cu Deficiency ◽  
Copper Compounds ◽  
The Difference ◽  
The Relationship

The effectiveness of copper oxychloride (CU2Cl(OH)3, 52% Cu) and chelated Cu (Cu-EDTA, 15% Cu) were compared with the effectiveness of copper sulphate (CuSO4, 25% Cu) as foliar sprays for alleviating Cu deficiency and obtaining maximum grain yields of wheat (1.93-2.5 t/ha). The experiments were conducted over 4 years at 4 sites in the Lake Grace and Newdegate districts, about 300-350 km south-east of Perth, Western Australia. Each source was sprayed at 6 or 7 rates of Cu to define the relationship between grain yield and the amount of foliar Cu applied for wheat grown on soils where Cu had not been previously applied. The levels of Cu sprayed in experiment 1 were 0, 21, 63, 125, 250, and 375 g/ha, and for experiments 2,3 and 4, the levels of Cu were 0, 25, 50, 100, 200, 400 and 800 g/ha. The relative effectiveness of foliar-applied chelated Cu and CU2Cl(OH)3, compared with CuSO4, was 1.72-2.24 and 0.47-0.63, respectively. Although the relative effectiveness of each product was different, similar quantities of each were required to achieve maximum wheat grain yield because of the difference in the Cu contents of each source of Cu. The amounts of Cu product sprayed for maximum grain yields of wheat varied within the ranges 0.9-1.8 kg/ha, 0.8-1.2 kg/ha and 0.8-1.8 kg/ha for CuSO4, chelated Cu and CU2Cl(OH)3, respectively.

Effect of fertiliser phosphorus and nitrogen on the concentrations of oil and protein in grain and the grain yield of canola (Brassica napus L.) grown in south-western Australia

2007 ◽  
Vol 47 (8) ◽  
pp. 984 ◽  
Author(s):  
R. F. Brennan ◽  
M. D. A. Bolland
Keyword(s):  
Brassica Napus ◽  
Grain Yield ◽  
Western Australia ◽  
Field Experiments ◽  
Grain Production ◽  
Brassica Napus L ◽  
Single Superphosphate ◽  
P Deficiency ◽  
Soil P ◽  
Soil P Testing

The effect of fertiliser phosphorus (P) and nitrogen (N) on seed (grain) yield and concentration of oil and protein in grain of canola (oil-seed rape; Brassica napus L.) was measured in two field experiments undertaken at eight sites from 1993–2005 in south-western Australia, on soils deficient in P and N. Six rates of P (0–40 kg P/ha as single superphosphate) and four rates of N (0–138 kg N/ha as urea) were applied. Significant grain yield increases (responses) to applied P occurred in both experiments and these responses increased as rates of applied N increased. For grain production, the P × N interaction was significant in all eight years and locations of the two experiments. Application of P had no effect on concentration of oil and protein in grain. Application of N always decreased the concentration of oil and increased the concentration of protein in grain. For canola grain production in the region, responses to applied N always occur whereas responses to applied P are rare, but if soil P testing indicates likely P deficiency, both P and N fertiliser need to be applied.

Comparing different sources of sulfur for high-rainfall pastures insouth-western Australia

2003 ◽  
Vol 43 (10) ◽  
pp. 1221 ◽  
Author(s):  
M. D. A. Bolland ◽  
J. S. Yeates ◽  
M. F. Clarke
Keyword(s):  
Western Australia ◽  
Field Experiments ◽  
Subterranean Clover ◽  
Trifolium Subterraneum ◽  
Residual Value ◽  
Single Superphosphate ◽  
Pasture Production ◽  
Leaching Losses ◽  
S Deficiency ◽  
Different Sources

The dry herbage yield increase (response) of subterranean clover (Trifolium subterraneum L.)-based pasture (>85% clover) to applications of different sources of sulfur (S) was compared in 7 field experiments on very sandy soils in the > 650 mm annual average rainfall areas of south-western Australia where S deficiency of clover is common when pastures grow rapidly during spring (August–November). The sources compared were single superphosphate, finely grained and coarsely grained gypsum from deposits in south-western Australia, and elemental S. All sources were broadcast (topdressed) once only onto each plot, 3 weeks after pasture emerged at the start of the first growing season. In each subsequent year, fresh fertiliser-S as single superphosphate was applied 3 weeks after pasture emerged to nil-S plots previously not treated with S since the start of the experiment. This was to determine the residual value of sources applied at the start of the experiment in each subsequent year relative to superphosphate freshly-applied in each subsequent year. In addition, superphosphate was also applied 6, 12 and 16 weeks after emergence of pasture in each year, using nil-S plots not previously treated with S since the start of the experiment. Pasture responses to applied S are usually larger after mid-August, so applying S later may match plant demand increasing the effectiveness of S for pasture production and may also reduce leaching losses of the applied S.At the same site, yield increases to applied S varied greatly, from 0 to 300%, at different harvests in the same or different years. These variations in yield responses to applied S are attributed to the net effect of mineralisation of different amounts of S from soil organic matter, dissolution of S from fertilisers, and different amounts of leaching losses of S from soil by rainfall. Within each year at each site, yield increases were mostly larger in spring (September–November) than in autumn (June–August). In the year of application, single superphosphate was equally or more effective than the other sources. In years when large responses to S occurred, applying single superphosphate later in the year was more effective than applying single superphosphate 3 weeks after pasture emerged (standard practice), so within each year the most recently applied single superphosphate treatment was the most effective S source. All sources generally had negligible residual value, so S needed to be applied each year to ensure S deficiency did not reduce pasture production.

scholarly journals Development of Chlorophyll-Meter-Index-Based Dynamic Models for Evaluation of High-Yield Japonica Rice Production in Yangtze River Reaches

Agronomy ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 106 ◽  
Author(s):  
Ke Zhang ◽  
Xiaojun Liu ◽  
Syed Tahir Ata-Ul-Karim ◽  
Jingshan Lu ◽  
Brian Krienke ◽  
...  
Keyword(s):  
Grain Yield ◽  
Field Experiments ◽  
High Yield ◽  
Accurate Estimation ◽  
Growth Stages ◽  
Rice Grain ◽  
Japonica Rice ◽  
Ripening Period ◽  
The Third ◽  
Different Growth Stages

Accurate estimation of the nitrogen (N) spatial distribution of rice (Oryza sativa L.) is imperative when it is sought to maintain regional and global carbon balances. We systematically evaluated the normalized differences of the soil and plant analysis development (SPAD) index (the normalized difference SPAD indexes, NDSIs) between the upper (the first and second leaves from the top), and lower (the third and fourth leaves from the top) leaves of Japonica rice. Four multi-location, multi-N rate (0–390 kg ha−1) field experiments were conducted using seven Japonica rice cultivars (9915, 27123, Wuxiangjing14, Wunyunjing19, Wunyunjing24, Liangyou9, and Yongyou8). Growth analyses were performed at different growth stages ranging from tillering (TI) to the ripening period (RP). We measured leaf N concentration (LNC), the N nutrition index (NNI), the NDSI, and rice grain yield at maturity. The relationships among the NDSI, LNC, and NNI at different growth stages showed that the NDSI values of the third and fourth fully expanded leaves more reliably reflected the N nutritional status than those of the first and second fully expanded leaves (LNC: NDSIL3,4, R2 > 0.81; NDSIothers, 0.77 > R2 > 0.06; NNI: NDSIL3,4, R2 > 0.83; NDSIothers, 0.76 > R2 > 0.07; all p < 0.01). Two new diagnostic models based on the NDSIL3,4 (from the tillering to the ripening period) can be used for effective diagnosis of the LNC and NNI, which exhibited reasonable distributions of residuals (LNC: relative root mean square error (RRMSE) = 0.0683; NNI: RRMSE = 0.0688; p < 0.01). The relationship between grain yield, predicted yield, and NDSIL3,4 were established during critical growth stages (from the stem elongation to the heading stages; R2 = 0.53, p < 0.01, RRMSE = 0.106). An NDSIL3,4 high-yield change curve was drawn to describe critical NDSIL3,4 values for a high-yield target (10.28 t ha−1). Furthermore, dynamic-critical curve models based on the NDSIL3,4 allowed a precise description of rice N status, facilitating the timing of fertilization decisions to optimize yields in the intensive rice cropping systems of eastern China.

Relative effectiveness of various sources, methods, times and rates of copper fertilizers in improving grain yield of wheat on a Cu-deficient soil

2005 ◽  
Vol 85 (1) ◽  
pp. 59-65 ◽  
Author(s):  
S. S. Malhi ◽  
L. Cowell ◽  
H. R. Kutcher
Keyword(s):  
Grain Yield ◽  
Protein Concentration ◽  
Growth Stage ◽  
Foliar Application ◽  
Leaf Growth ◽  
Flag Leaf ◽  
Relative Effectiveness ◽  
Growing Season ◽  
Growth Stages ◽  
Cu Deficiency

A field experiment was conducted to determine the relative effectiveness of various sources, methods, times and rates of Cu fertilizers on grain yield, protein concentration in grain, concentration of Cu in grain and uptake of Cu in grain of wheat (Triticum aestivum L.), and residual concentration of DTPA-extractable Cu in soil on a Cu-deficient soil near Porcupine Plain in northeastern Saskatchewan. The experiment was conducted from 1999 to 2002 on the same site, but the results for 2002 were not presented because of very low grain yield due to drought in the growing season. The 25 treatments included soil application of four granular Cu fertilizers (Cu lignosulphonate, Cu sulphate, Cu oxysulphate I and Cu oxysulphate II) as soil-incorporated (at 0.5 and 2.0 kg Cu ha-1), seedrow-placed (at 0.25 and 1.0 kg Cu ha-1) and foliar application of four solution Cu fertilizers (Cu chelate-EDTA, Cu sequestered I, Cu sulphate/chelate and Cu sequestered II at 0.25 kg Cu ha-1) at the four-leaf and flag-leaf growth stages, plus a zero-Cu check. Soil was tilled only once to incorporate all designated Cu and blanket fertilizers into the soil a few days prior to seeding. Wheat plants in the zero-Cu treatment exhibited Cu deficiency in all years. For foliar application at the flag-leaf stage, grain yield increased with all four of the Cu fertilizers in 2000 and 2001, and in all but Cu sequestered II in 1999. Foliar application at the four-leaf growth stage of three Cu fertilizers (Cu chelate-EDTA, Cu sequestered I and Cu sulphate/chelate), soil incorporation of all Cu fertilizers at 2 kg Cu ha-1 and two Cu fertilizers (Cu lignosulphonate and Cu sulphate) at 0.5 kg Cu ha-1 rate, and seedrow placement of two Cu fertilizers (Cu lignosulphonate and Cu sulphate) at 1 kg Cu ha-1 increased grain yield of wheat only in 2001. There was no effect of Cu fertilization on protein concentration in grain. The increase in concentration and uptake of Cu in grain from Cu fertilization usually showed a trend similar to grain yield. There was some increase in residual DTPA-extractable Cu in the 0–60 cm soil in Cu lignosulphonate, Cu sulphate and Cu oxysulphate II soil incorporation treatments, particularly at the 2 kg Cu ha-1 rate. In summary, the results indicate that foliar application of Cu fertilizers at the flag-leaf growth stage can be used for immediate correction of Cu deficiency in wheat. Because Cu deficiency in crops often occurs in irregular patches within fields, foliar application may be the most practical and economical way to correct Cu deficiency during the growing season, as lower Cu rates can correct Cu deficiency. Key words: Application time, Cu source, foliar application, granular Cu, growth stage, placement method, rate of Cu, seedrow-placed Cu, soil incorporation

Grain yield and water use efficiency of early maturing wheat in low rainfall Mediterranean environments

1997 ◽  
Vol 48 (5) ◽  
pp. 595 ◽  
Author(s):  
K. L. Regan ◽  
K. H. M. Siddique ◽  
D. Tennant ◽  
D. G. Abrecht
Keyword(s):  
Grain Yield ◽  
Water Use Efficiency ◽  
Water Use ◽  
Western Australia ◽  
Field Experiments ◽  
Grain Filling ◽  
Commercial Cultivars ◽  
Early Maturing ◽  
Use Efficiency ◽  
Short Season

Wheat cultivars with very early maturities appropriate for late sowings in low-rainfall (<325 mm) short-season environments are currently unavailable to wheat growers in the eastern margin of the cropping region of Western Australia. A demonstration that very early-maturing genotypes can out-perform current commercial cultivars would open new opportunities for breeding programs to select very early-maturing, high- and stable-yielding cultivars for these environments. Six field experiments were conducted over 4 seasons at 2 low-rainfall sites in Western Australia to investigate crop growth, grain yield, and water use efficiency of very early-maturing genotypes compared with current commercial cultivars when sown after 1 June. Very early-maturing genotypes reached anthesis up to 24 days (328 degree-days) earlier than the current cultivars, produced less leaves, had similar yields and dry matter, and maintained high water use efficiencies. On average across seasons and locations the very early-maturing genotypes (W87–022–511, W87–114–549, W87–410–509) yielded more than the later maturing cultivars Gamenya and Spear (190 v. 160 g/m2) but they were similar to the early-maturing commercial cultivars Kulin and Wilgoyne (191 g/m2). Very early-maturing genotypes generally had a higher harvest index and produced fewer spikelets, but heavier and more grains, than Kulin and Wilgoyne. There were only small differences in total water use between very early-maturing genotypes and commercial cultivars; however, very early-maturing genotypes used less water in the pre-anthesis period and more water in the post-anthesis period than the later maturing genotypes, and hence, experienced less water deficit during the grain-filling period. This study indicates that there is a role for very early-maturing genotypes in low-rainfall short-season environments, when the first autumn rains arrive late (after 1 June).

Tolerance and Selectivity of Cereal Species and Cultivars to Postemergence Weed Harrowing

Weed Science ◽  
2009 ◽  
Vol 57 (3) ◽  
pp. 338-345 ◽  
Author(s):  
Jesper Rasmussen ◽  
Helle H. Nielsen ◽  
Hanne Gundersen
Keyword(s):  
Grain Yield ◽  
Weed Control ◽  
Field Experiments ◽  
Yield Loss ◽  
Soil Cover ◽  
Crop Damage ◽  
Growth Stages ◽  
Crop Tolerance ◽  
Barley Cultivars ◽  
Cereal Species

POST weed harrowing and other cultivation methods to control weeds in early crop growth stages may result in crop damage due to low selectivity between crop and weeds. Crop tolerance to cultivation plays an important role but it has not been clearly defined and analyzed. We introduce a procedure for analyzing crop tolerance on the basis of digital image analysis. Crop tolerance is defined as the ability of the crop to avoid yield loss from cultivation in the absence of weeds, and it has two components: resistance and recovery. Resistance is the ability of the crop to resist soil covering and recovery is the ability to recover from it. Soil covering is the percentage of the crop that has been buried because of cultivation. We analyzed data from six field experiments, four experiments with species of small grains, barley, oat, wheat, and triticale, and two experiments with barley cultivars with different abilities to suppress weeds. The order of species' tolerance to weed harrowing was triticale > wheat > barley > oat and the differences were mainly caused by different abilities to recover from soil covering. At 25% soil covering, grain yield loss in triticale was 0.5%, in wheat 2.5%, in barley 3.7%, and in oat 6.5%. Tolerance, resistance, and recovery, however, were influenced by year, especially for oat and barley. There was no evidence of differences between barley cultivars in terms of tolerance indicating that differences among species are more important than differences among cultivars. Selectivity analysis made it possible to calculate the crop yield loss due to crop damage associated with a certain percentage of weed control. In triticale, 80% weed control was associated with 22% crop soil cover on average, which reduced grain yield 0.4% on average in the absence of weeds. Corresponding values for wheat, barley, and oat were 23, 21, and 20% crop soil cover and 2.3, 3.6, and 5.1% grain yield loss.

Sign in / Sign up

Export Citation Format

Share Document