Relative effectiveness of various sources, methods, times and rates of copper fertilizers in improving grain yield of wheat on a Cu-deficient soil

2005 ◽  
Vol 85 (1) ◽  
pp. 59-65 ◽  
Author(s):  
S. S. Malhi ◽  
L. Cowell ◽  
H. R. Kutcher
Keyword(s):  
Grain Yield ◽  
Protein Concentration ◽  
Growth Stage ◽  
Foliar Application ◽  
Leaf Growth ◽  
Flag Leaf ◽  
Relative Effectiveness ◽  
Growing Season ◽  
Growth Stages ◽  
Cu Deficiency

A field experiment was conducted to determine the relative effectiveness of various sources, methods, times and rates of Cu fertilizers on grain yield, protein concentration in grain, concentration of Cu in grain and uptake of Cu in grain of wheat (Triticum aestivum L.), and residual concentration of DTPA-extractable Cu in soil on a Cu-deficient soil near Porcupine Plain in northeastern Saskatchewan. The experiment was conducted from 1999 to 2002 on the same site, but the results for 2002 were not presented because of very low grain yield due to drought in the growing season. The 25 treatments included soil application of four granular Cu fertilizers (Cu lignosulphonate, Cu sulphate, Cu oxysulphate I and Cu oxysulphate II) as soil-incorporated (at 0.5 and 2.0 kg Cu ha-1), seedrow-placed (at 0.25 and 1.0 kg Cu ha-1) and foliar application of four solution Cu fertilizers (Cu chelate-EDTA, Cu sequestered I, Cu sulphate/chelate and Cu sequestered II at 0.25 kg Cu ha-1) at the four-leaf and flag-leaf growth stages, plus a zero-Cu check. Soil was tilled only once to incorporate all designated Cu and blanket fertilizers into the soil a few days prior to seeding. Wheat plants in the zero-Cu treatment exhibited Cu deficiency in all years. For foliar application at the flag-leaf stage, grain yield increased with all four of the Cu fertilizers in 2000 and 2001, and in all but Cu sequestered II in 1999. Foliar application at the four-leaf growth stage of three Cu fertilizers (Cu chelate-EDTA, Cu sequestered I and Cu sulphate/chelate), soil incorporation of all Cu fertilizers at 2 kg Cu ha-1 and two Cu fertilizers (Cu lignosulphonate and Cu sulphate) at 0.5 kg Cu ha-1 rate, and seedrow placement of two Cu fertilizers (Cu lignosulphonate and Cu sulphate) at 1 kg Cu ha-1 increased grain yield of wheat only in 2001. There was no effect of Cu fertilization on protein concentration in grain. The increase in concentration and uptake of Cu in grain from Cu fertilization usually showed a trend similar to grain yield. There was some increase in residual DTPA-extractable Cu in the 0–60 cm soil in Cu lignosulphonate, Cu sulphate and Cu oxysulphate II soil incorporation treatments, particularly at the 2 kg Cu ha-1 rate. In summary, the results indicate that foliar application of Cu fertilizers at the flag-leaf growth stage can be used for immediate correction of Cu deficiency in wheat. Because Cu deficiency in crops often occurs in irregular patches within fields, foliar application may be the most practical and economical way to correct Cu deficiency during the growing season, as lower Cu rates can correct Cu deficiency. Key words: Application time, Cu source, foliar application, granular Cu, growth stage, placement method, rate of Cu, seedrow-placed Cu, soil incorporation

The effect of foliar copper application on grain yield and quality of wheat

2004 ◽  
Vol 84 (1) ◽  
pp. 47-56 ◽  
Author(s):  
R. E. Karamanos ◽  
Q. Pomarenski ◽  
T. B. Goh ◽  
N. A Flore
Keyword(s):  
Grain Yield ◽  
Growth Stage ◽  
Foliar Application ◽  
Growing Season ◽  
Quality Parameters ◽  
Growth Stages ◽  
Appreciable Effect ◽  
Cu Deficiency ◽  
Seed Placement ◽  
Grain Yield And Quality

Available Cu concentrations in prairie soils (DTPA-extractable Cu) are extremely variable, thus resulting in areas within fields that are Cu deficient. These areas are difficult to characterize by a soil test based on a composite field sample; thus, when they are identified in the growing season, foliar Cu application possibly represents the only method of correcting them. A project, carried out over a period of 8 yr that consisted of four experiments and a total of 22 trials, was designed to ascertain whether foliar Cu applications indeed provide a satisfactory means of correcting Cu deficiency. Experiments included comparison of foliar applications at Feekes growth stages 6 (first node of stem visible at base of shoot) and 6 plus 10 (sheath of last leaf completely grown out) to soil broadcast and incorporation of 4 to 5.5 kg Cu ha-1 as copper sulphate (CuSO4·5H2O) or seed placement of 2 kg Cu ha-1 in three forms (two oxysulphates and one sulphate); foliar application of a variety of products representing different chemistries (chelate, lignin sulphonate, humic acid, oxychloride and citric acid) on a number of wheat cultivars at Feekes growth stage 10 or one cultivar at Feekes growth stages 2 (beginning of tillering), 6, 10 and 2 plus 10. Foliar applications appear to provide a solution to Cu deficiency that is identified during the growing season. However, foliar applications were not always as effective as broadcast and incorporation of at least 4 kg Cu ha-1 in the form of CuSO4·5H2O, which still remains the preferred method to correct a Cu deficiency. Foliar application at Feekes growth stage 2 was ineffective, whereas a single foliar application at Feekes growth stage 10 was not as satisfactory as a single one at Feekes growth stage 6. Thus, the latter stage appears to be preferable; however, maximum grain yield in some cases was obtained by the combination of two foliar Cu applications, one each at Feekes growth stages 6 and 10. Responses of wheat to foliar Cu application were obtained on soils that contained DTPA-extractable Cu concentration of less than 0.4 mg kg-1. Foliar Cu applications did not have an appreciable effect on grain quality parameters, such as hectolitre weight, moisture or protein content. Key words: DTPA-extractable, Feekes growth stage, deficient, marginal, plant tissue

Response of eight Canadian spring wheat (Triticum aestivum L.) cultivars to copper: Copper content in the leaves and grain

1995 ◽  
Vol 75 (2) ◽  
pp. 405-411 ◽  
Author(s):  
J. O. Owuoche ◽  
K. G. Briggs ◽  
G. J. Taylor ◽  
D. C. Penney
Keyword(s):  
Triticum Aestivum ◽  
Grain Yield ◽  
Spring Wheat ◽  
Growth Stage ◽  
Triticum Aestivum L ◽  
Yield Potential ◽  
Growth Stages ◽  
Cu Deficiency ◽  
Unlimited Growth ◽  
Young Leaves

Concentrations of copper (Cu) in the youngest fully emerged leaves (YFEL) and grain of eight widely grown Canadian spring wheat (Triticum aestivum L.) cultivars, Biggar, Columbus, Conway, Katepwa, Laura, Oslo, Park and Roblin, were determined. Leaves were sampled at five growth stages from field plots grown in 1990 and 1991 on Cu-deficient soil or soil treated with 12.2 kg Cu ha−1 as Cu sulphate. Symptoms of Cu deficiency, mainly rolling and wilting of young leaves and twisting and terminal dieback, were noted on Katepwa, Park and Roblin at Zadok growth stage 24. Significant (P ≤ 0.01) effects on Cu concentration in the YFEL were found due to cultivar, copper treatment, year and growth stage. The Cu concentrations in Katepwa, Park and Roblin not treated with Cu ranged between 4.6 and 5.7 μg g−1 in 1990 and between 2.8 and 3.5 μg g−1 in 1991 at Zadok growth stage 22. Cultivars Biggar, Columbus, Conway, Laura and Oslo did not show symptoms of Cu deficiency and had Cu concentrations in the range of 4.6–5.4 μg g−1 in 1990 and 2.3–3.1 μg g−1 in 1991. Deficiency symptoms were observed on Katepwa and Park supplied with Cu, although concentrations of Cu in the YFEL were relatively high. Grains sampled from the tillers generally had lower Cu concentrations than those from main stems, but the magnitude of this difference varied with the year. Significant correlations were found between Cu concentrations in the YFEL and grain yield (r = 0.90* in 1990 and 0.89* in 1991) and with floret fertility (r = 0.74* in 1990 and 0.94** in 1991). These large and significant correlations confirm the important role of Cu nutritional status in influencing floret fertility and grain yield. Critical levels of Cu in the leaves needed for unlimited growth could not be defined because of year-to-year variability. In this study, Cu concentration in the YFEL was not a useful indicator of potential Cu use efficiency in different wheat cultivars. However, for individual plants under Cu-deficiency stress, Cu concentration in the YFEL was a good indicator of the grain yield potential of different cultivars. Key words:Triticum aestivum, copper, youngest fully emerged leaves, tissue analysis

scholarly journals Sensitivity and Recovery of Grain Sorghum to Simulated Drift Rates of Glyphosate, Glufosinate, and Paraquat

Agriculture ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 70 ◽  
Author(s):  
Ralph Hale ◽  
Taghi Bararpour ◽  
Gurpreet Kaur ◽  
John Seale ◽  
Bhupinder Singh ◽  
...  
Keyword(s):  
Growth Stage ◽  
Leaf Growth ◽  
Flag Leaf ◽  
Grain Sorghum ◽  
Yield Reduction ◽  
Leaf Stage ◽  
Herbicide Treatments ◽  
Significant Yield ◽  
Glyphosate Drift ◽  
Herbicide Drift

A field experiment was conducted in 2017 and 2018 to evaluate the sensitivity and recovery of grain sorghum to the simulated drift of glufosinate, glyphosate, and paraquat at two application timings (V6 and flag leaf growth stage). Paraquat drift caused maximum injury to sorghum plants in both years, whereas the lowest injury was caused by glyphosate in 2017. Averaged over all herbicide treatments, injury to grain sorghum from the simulated herbicide drift was 5% greater when herbicides were applied at flag leaf stage, as compared to herbicide applications at the six-leaf stage in 2017. In 2018, injury from glyphosate drift was higher when applied at the six-leaf stage than at the flag leaf stage. Paraquat and glufosinate drift caused more injury when applied at flag leaf stage than at six-leaf stage at 14 days after application in 2018. About 21% to 29% of injury from the simulated drift of paraquat led to a 31% reduction in grain sorghum yield, as compared to a nontreated check in 2017. The simulated drift of glyphosate and glufosinate did not result in any significant yield reduction compared to the nontreated check in 2017, possibly due to the recovery of sorghum plants after herbicides’ drift application.

Effect of leaf spotting diseases on grain yield and seed traits of wheat in southern Saskatchewan

2002 ◽  
Vol 82 (3) ◽  
pp. 507-512 ◽  
Author(s):  
H. Wang ◽  
M. R. Fernandez ◽  
F. R. Clarke ◽  
R. M. DePauw ◽  
J. M. Clarke
Keyword(s):  
Grain Yield ◽  
Protein Concentration ◽  
Flag Leaf ◽  
Kernel Weight ◽  
Test Weight ◽  
Grain Protein ◽  
Seed Traits ◽  
Grain Protein Concentration ◽  
Leaf Emergence ◽  
Weight Test

Although leaf spotting diseases have been reported to have a negative effect on grain yield and seed characteristics of wheat (Triticum spp.), the magnitude of such effects on wheat grown on dryland in southern Saskatchewan is not known. A fungicide experiment was conducted at Swift Current (Brown soil) and Indian Head (Black soil) from 1997 to 1999 to determine the effect of leaf spotting diseases on yield and seed traits of wheat. Two fungicides, Folicur 3.6F and Bravo 500, were applied at different growth stages on three common wheat (Triticum aestivum L.) and three durum wheat (T. turgidum L. var durum) genotypes. Fungicide treatments generally did not affect yield, kernel weight, test weight or grain protein concentration, and these effects were relatively consistent among genotypes. Folicur applied at head emergence in 1997 and at flag leaf emergence and/or head emergence in 1998 increased yield at Indian Head (P < 0.05). Fungicides applied at and before flag leaf emergence tended to increase kernel weight. Grain protein concentration increased only in treatments of Bravo applications at Indian Head in 1998. These results suggested that under the dryland environment and management in southern Saskatchewan leaf spotting diseases generally have a small effect on yield, kernel weight, test weight and protein concentration. Key words: Wheat, leaf spotting diseases, fungicide, yield

Effectiveness of some copper compounds applied as foliar sprays in alleviating copper deficiency of wheat grown on copper-deficient soils of Western Australia

1990 ◽  
Vol 30 (5) ◽  
pp. 687 ◽  
Author(s):  
RF Brennan
Keyword(s):  
Grain Yield ◽  
Western Australia ◽  
Copper Deficiency ◽  
Relative Effectiveness ◽  
Grain Yields ◽  
Foliar Sprays ◽  
Cu Deficiency ◽  
Copper Compounds ◽  
The Difference ◽  
The Relationship

The effectiveness of copper oxychloride (CU2Cl(OH)3, 52% Cu) and chelated Cu (Cu-EDTA, 15% Cu) were compared with the effectiveness of copper sulphate (CuSO4, 25% Cu) as foliar sprays for alleviating Cu deficiency and obtaining maximum grain yields of wheat (1.93-2.5 t/ha). The experiments were conducted over 4 years at 4 sites in the Lake Grace and Newdegate districts, about 300-350 km south-east of Perth, Western Australia. Each source was sprayed at 6 or 7 rates of Cu to define the relationship between grain yield and the amount of foliar Cu applied for wheat grown on soils where Cu had not been previously applied. The levels of Cu sprayed in experiment 1 were 0, 21, 63, 125, 250, and 375 g/ha, and for experiments 2,3 and 4, the levels of Cu were 0, 25, 50, 100, 200, 400 and 800 g/ha. The relative effectiveness of foliar-applied chelated Cu and CU2Cl(OH)3, compared with CuSO4, was 1.72-2.24 and 0.47-0.63, respectively. Although the relative effectiveness of each product was different, similar quantities of each were required to achieve maximum wheat grain yield because of the difference in the Cu contents of each source of Cu. The amounts of Cu product sprayed for maximum grain yields of wheat varied within the ranges 0.9-1.8 kg/ha, 0.8-1.2 kg/ha and 0.8-1.8 kg/ha for CuSO4, chelated Cu and CU2Cl(OH)3, respectively.

Safening Influence of LAB 145 138 on Nicosulfuron, Terbufos and Bentazon Interactions in Sweet Corn (Zea mays)

Weed Science ◽  
1996 ◽  
Vol 44 (2) ◽  
pp. 339-344 ◽  
Author(s):  
Darren K. Robinson ◽  
David W. Monks ◽  
James D. Burton
Keyword(s):  
Zea Mays ◽  
Seed Treatment ◽  
Growth Stage ◽  
Yield Loss ◽  
Sweet Corn ◽  
Leaf Growth ◽  
Growth Stages ◽  
Height Reduction ◽  
Reduced Height ◽  
Previously Treated

LAB 145 138 (LAB) was evaluated as a safener to improve sweet corn tolerance to nicosulfuron applied POST alone or with terbufos applied in the planting furrow or bentazon applied POST. To ensure enhanced injury for experimental purposes, nicosulfuron was applied at twice the registered rate alone or mixed with bentazon at the six- to seven-leaf growth stage of corn previously treated with the highest labeled rate of terbufos 15 G formulation. LAB applied as a seed treatment (ST) or POST at the two- to three-, four- to five-, or six- to seven-leaf growth stages reduced height reduction and yield loss from nicosulfuron applied POST in combination with terbufos applied in-furrow. LAB applied POST at the four- to five-leaf growth stage was most effective in preventing injury from this treatment, with yield reduced only 8% compared with 54% from the nicosulfuron and terbufos treatment. LAB applied POST at the eight- to nine-leaf growth stage did not alleviate injury. With the nicosulfuron, terbufos, and bentazon combination, LAB applied POST at the three- to four- or six- to seven-leaf growth stages decreased height reduction and yield loss caused by this combination, with LAB at the three- to four-leaf growth stage being most effective.

Control of Early Watergrass (Echinochloa Oryzoides) and Late Watergrass (Echinochloa Phyllopogon) with Cyhalofop, Clefoxydim, and Penoxsulam Applied Alone and in Mixture with Broadleaf Herbicides

2006 ◽  
Vol 20 (4) ◽  
pp. 992-998 ◽  
Author(s):  
Christos A. Damalas ◽  
Kico V. Dhima ◽  
Ilias G. Eleftherohorinos
Keyword(s):  
Growth Stage ◽  
Leaf Growth ◽  
Application Rate ◽  
Early Growth ◽  
Rice Fields ◽  
Growth Stages ◽  
Early Growth Stage ◽  
Late Growth ◽  
Echinochloa Phyllopogon

Experiments were conducted to study the effect of application rate, growth stage, and tank-mixing azimsulfuron or bentazon on the activity of cyhalofop, clefoxydim, and penoxsulam against two morphologically distinctEchinochloaspecies from rice fields in Greece. Mixtures of penoxsulam with MCPA were also evaluated. Cyhalofop (300 to 600 g ai/ha) applied at the three- to four-leaf growth stage provided 62 to 85% control of early watergrass but 41 to 83% control of late watergrass averaged over mixture treatments. Control ranged from 37 to 80% for early watergrass and from 35 to 78% for late watergrass when cyhalofop was applied at the five- to six-leaf growth stage averaged over mixture treatments. Mixtures of cyhalofop with azimsulfuron or bentazon reduced efficacy on both species irrespective of growth stage or cyhalofop application rate compared with cyhalofop alone. Clefoxydim (100 to 250 g ai/ha) applied alone at the three- to four-leaf growth stage provided 98 to 100% control of early watergrass and 91 to 100% control of late watergrass; when clefoxydim was applied alone at the five- to six-leaf growth stage the control obtained was 91 to 100% for early watergrass and 79 to 100% for late watergrass. Mixtures of clefoxydim with azimsulfuron or bentazon reduced efficacy on late watergrass at the early growth stage and on both species at the late growth stage. Penoxsulam (20 to 40 g ai/ha) applied alone provided 94 to 100% control of both species at both growth stages. Mixtures of MCPA with penoxsulam reduced efficacy on late watergrass at the early growth stage and on both species at the late growth stage. Mixtures of penoxsulam with azimsulfuron or bentazon reduced efficacy only on late watergrass at the late growth stage.

A review of copper fertilizer management for optimum yield and quality of crops in the Canadian Prairie provinces

2006 ◽  
Vol 86 (3) ◽  
pp. 605-619 ◽  
Author(s):  
S. S. Malhi ◽  
R. E. Karamanos
Keyword(s):  
Seed Yield ◽  
Growth Stage ◽  
Field Experiments ◽  
Seed Quality ◽  
Soil Analysis ◽  
Growth Stages ◽  
Canadian Prairie ◽  
Cu Deficiency ◽  
Yield And Quality

Deficiency of copper (Cu) in Canadian prairie soils is not widespread, but whenever it occurs it can cause a drastic reduction in seed yield and quality of most cereals, especially wheat. Field experiments conducted in western Canada indicated that broadcast-incorporation of granular Cu fertilizers prior to seeding at 3-5.6 kg Cu ha-1 was usually sufficient to prevent Cu deficiency in wheat, and improve seed yield and quality. At lower rates (< 2.0 kg Cu ha-1), broadcast-incorporation of granular Cu fertilizers was not effective, while surface spray-broadcast followed by incorporation of liquid Cu fertilizers was much more effective in increasing seed yield of wheat in the first year of application. Surface broadcast without incorporation and seedrow-placed granular Cu fertilizers were much less effective in improving seed yield of wheat than their foliar or soil-incorporated applications. In the growing season, foliar applications of Cu at 0.20 to 0.28 kg Cu ha-1 to wheat at the Feekes 6 (first node of stem visible at base of shoot or stem elongation), Feekes 10 (sheath of last leaf completely grown or flag-leaf) and early boot growth stages were very effective in restoring seed yield, while Cu applications at the Feekes 2 (four-leaf) or Feekes 10.5 (complete heading) growth stage did not have a consistent effect to correct damage caused by Cu deficiency. Some Cu fertilizers (e.g., Cu oxide) were less effective than others in preventing/correcting Cu deficiency. Soil application at relatively high rates produced residual benefits in increasing seed yield for a number of years. The sensitivity of crops to Cu deficiency is usually in the order (wheat, flax, canary seed) > (barley, alfalfa) > (timothy seed, oats, corn) > (peas, clovers) > (canola, rye, forage grasses). Stem melanosis in wheat was associated with deficiency of Cu in soil, and the disease was reduced substantially with Cu application. A high level of available P in soil was observed to induce/increase severity of Cu deficiency in wheat. Soil analysis for diethylene triamine pentacetic acid- (DTPA) extractable Cu in soil can be used as a good diagnostic tool to predict Cu deficiency, but there was a poor relationship between total Cu concentration in shoots and the degree of Cu deficiency in crops. Application of Cu fertilizers to wheat on Cu-deficient soils also generally improved seed quality. Key words: Application time, Cu source, foliar application, granular Cu, growth stage, placement method, rate of Cu, seedrow-placed Cu, soil incorporation, wheat

Selective chemical control of doublegee (Emex australis) in legume pasture

1977 ◽  
Vol 17 (84) ◽  
pp. 80 ◽  
Author(s):  
DJ Gilbey
Keyword(s):  
Chemical Control ◽  
Growth Stage ◽  
Leaf Growth ◽  
Growing Season ◽  
Field Trials ◽  
Emex Australis ◽  
Selective Control ◽  
Selective Chemical ◽  
One Year ◽  
Clover Seed

Seven chemicals were evaluated for selective control of doublegee (Emex australis) in legume pasture in 14 field trials conducted at several sites in Western Australia over three years. The effect of removing doublegee on pasture growth was studied in four field trials over the same period. Three hundred and fifty to 700 g a.i. methabenzthiazuron ha-1 gave good selective control of this weed except at Chapman and Wongan Hills in 1974 where the beginning of the growing season was poorly defined. The selectivity of bromoxynil and WL 6361 1 in one year of trials was similar to methabenzthiazuron but that of asulam and metoxuron was too restricted for practical use when doublegees were sprayed at the 2-4 leaf growth stage, 2,4-DB showed selectivity on doublegees with 12 leaves, and no herbicides were satisfactory on doublegees with more than 12 leaves at the time of spraying. Pasture growth and clover seed production was not substantially increased by controlling doublegee.

scholarly journals Are early foliar fungicide applications on durum wheat grown in southeast Saskatchewan beneficial in increasing grain productivity?

2014 ◽  
Vol 94 (5) ◽  
pp. 891-903 ◽  
Author(s):  
M. R. Fernandez ◽  
W. E. May ◽  
S. Chalmers ◽  
M. E. Savard ◽  
A. K. Singh
Keyword(s):  
Grain Yield ◽  
Durum Wheat ◽  
Stem Elongation ◽  
Flag Leaf ◽  
Kernel Weight ◽  
Growth Stages ◽  
Head Blight ◽  
Leaf Emergence ◽  
Grain Productivity ◽  
Foliar Fungicide

Fernandez, M. R., May, W. E., Chalmers, S., Savard, M. E. and Singh, A. K. 2014. Are early foliar fungicide applications on durum wheat grown in southeast Saskatchewan beneficial in increasing grain productivity? Can. J. Plant. Sci. 94: 891–903. Producers have expressed interest in applying fungicides early in the development of durum wheat to reduce disease severity and increase grain yield. To address this issue, a field trial was conducted in southeast Saskatchewan (2004–2006) to determine the impacts of single and double foliar fungicide (tebuconazole) applications at various growth stages on leaf spotting, Fusarium head blight/Fusarium-damaged kernels, deoxynivalenol concentration, dark kernel discolouration, and grain traits of durum wheat. In most cases, application at stem elongation was not effective in reducing Fusarium diseases, or improving yield and grain characteristics. Application at flag leaf emergence was more effective, but for the most part, application at anthesis resulted in the most consistent reduction in disease levels, and improvement in test weight. Double fungicide applications (stem elongation or flag leaf emergence, and anthesis) were not more effective in disease control than a single application at anthesis. Grain yield did not differ significantly among any of the treatments. In contrast to Fusarium diseases and leaf spotting, fungicide applications at stem elongation and/or flag leaf emergence resulted in increased kernel weight and percentage dark kernel discolouration, which was significant in 2005 (10.53–10.60% total kernel discolouration in the stem and flag leaf treatments vs. 6.13% for the untreated control). In one or more years, kernel weight was negatively associated with Fusarium disease variables and leaf spotting, but positively associated with kernel discolouration. We conclude that under variable environmental conditions in Saskatchewan, early preventative fungicide use on durum wheat should not be recommended as a strategy to improve productivity, and might even result in increases in dark kernel discolouration and grain downgrading.

Sign in / Sign up

Export Citation Format

Share Document