Effectiveness of some copper compounds applied as foliar sprays in alleviating copper deficiency of wheat grown on copper-deficient soils of Western Australia

1990 ◽  
Vol 30 (5) ◽  
pp. 687 ◽  
Author(s):  
RF Brennan
Keyword(s):  
Grain Yield ◽  
Western Australia ◽  
Copper Deficiency ◽  
Relative Effectiveness ◽  
Grain Yields ◽  
Foliar Sprays ◽  
Cu Deficiency ◽  
Copper Compounds ◽  
The Difference ◽  
The Relationship

The effectiveness of copper oxychloride (CU2Cl(OH)3, 52% Cu) and chelated Cu (Cu-EDTA, 15% Cu) were compared with the effectiveness of copper sulphate (CuSO4, 25% Cu) as foliar sprays for alleviating Cu deficiency and obtaining maximum grain yields of wheat (1.93-2.5 t/ha). The experiments were conducted over 4 years at 4 sites in the Lake Grace and Newdegate districts, about 300-350 km south-east of Perth, Western Australia. Each source was sprayed at 6 or 7 rates of Cu to define the relationship between grain yield and the amount of foliar Cu applied for wheat grown on soils where Cu had not been previously applied. The levels of Cu sprayed in experiment 1 were 0, 21, 63, 125, 250, and 375 g/ha, and for experiments 2,3 and 4, the levels of Cu were 0, 25, 50, 100, 200, 400 and 800 g/ha. The relative effectiveness of foliar-applied chelated Cu and CU2Cl(OH)3, compared with CuSO4, was 1.72-2.24 and 0.47-0.63, respectively. Although the relative effectiveness of each product was different, similar quantities of each were required to achieve maximum wheat grain yield because of the difference in the Cu contents of each source of Cu. The amounts of Cu product sprayed for maximum grain yields of wheat varied within the ranges 0.9-1.8 kg/ha, 0.8-1.2 kg/ha and 0.8-1.8 kg/ha for CuSO4, chelated Cu and CU2Cl(OH)3, respectively.

Effectiveness of zinc sulfate and zinc chelate as foliar sprays in alleviating zinc deficiency of wheat grown on zinc-deficient soils in Western Australia

1991 ◽  
Vol 31 (6) ◽  
pp. 831 ◽  
Author(s):  
RF Brennan
Keyword(s):  
Grain Yield ◽  
Zinc Deficiency ◽  
Western Australia ◽  
Zinc Sulfate ◽  
Growth Stage ◽  
Relative Effectiveness ◽  
Grain Yields ◽  
Foliar Sprays ◽  
The Relationship

The relative effectiveness of zinc chelate (Zn-EDTA, 15% Zn) and zinc sulfate (23% Zn) applied as f o l k sprays for alleviating zinc deficiency of wheat was assessed. The experiments were conducted at 3 sites in 3 different years, in the Newdegate district about 350 km south-east of Perth, Western Australia. Each source was sprayed at 6 rates of Zn, to define the relationship between grain yield and the amount of foliar Zn applied for wheat grown on Zn-deficient soils where no Zn had been previously applied. The levels of Zn sprayed were 0, 25, 50, 100,200 and 400 g/ha (experiment 1); and 0, 28, 56, 112, 225 and 450 g/ha (experiments 2 and 3). Foliar-applied zinc chelate was 1.4-1.7 times more effective than zinc sulfate applied at the GS 14 growth stage. However, the sprays were equally effective when applied at the GS 23-24 growth stage. Zinc sulfate banded with the seed at sowing produced the highest grain yields.

Effect of nitrogen and residual copper on the occurrence of Rhizoctonia bare patch in wheat grown near Esperance, Western Australia

1991 ◽  
Vol 31 (2) ◽  
pp. 259 ◽  
Author(s):  
RF Brennan
Keyword(s):  
Grain Yield ◽  
Rhizoctonia Solani ◽  
Ammonium Nitrate ◽  
Western Australia ◽  
Root Rot ◽  
Plant Nutrition ◽  
Bare Patch ◽  
Grain Yields ◽  
Cu Deficiency ◽  
Rhizoctonia Root Rot

The area of rhizoctonia bare patch and the incidence and severity of rhizoctonia root rot (caused by Rhizoctonia solani Khnn) were reduced by the application of ammonium nitrate fertiliser. Residual copper (Cu) from a Cu fertiliser treatment in 1967 had no effect on the area of rhizoctonia bare patch or the incidence and severity of root rot. With no applied nitrogen (N), 17.6% (mean of residual Cu levels) of the plot was affected by patches while the area of plot affected by patches declined to 4.2% where 92 kg N/ha had been applied. The incidence and severity of rhizoctonia root rot declined from 45.9 and 27.0% to 32.7 and 9.1%, respectively, with the application of N fertiliser. The grain yield of wheat supplied with adequate Cu increased although the level of N fertiliser exceeded that considered adequate for plant nutrition. The response is explained by the control of rhizoctonia bare patch. The area of rhizoctonia patches and the incidence and severity of rhizoctonia root rot decreased with the application of N, and with adequate Cu fertiliser (2.2 kg Cu/ha), the grain yields increased. However, with marginal and deficient levels of applied Cu fertiliser, the application of N fertiliser induced Cu deficiency in wheat plants, and the grain yields declined although rhizoctonia patches were reduced.

Increasing phosphorus concentration in lupin seed increases grain yield on phosphorus deficient soil

1989 ◽  
Vol 29 (6) ◽  
pp. 797 ◽  
Author(s):  
MDA Bolland ◽  
BH Paynter ◽  
MJ Baker
Keyword(s):  
Field Experiment ◽  
Grain Yield ◽  
Western Australia ◽  
Dry Matter ◽  
Lupinus Angustifolius ◽  
Phosphorus Concentration ◽  
Grain Yields ◽  
P Concentration ◽  
Lupin Seed ◽  
The Difference

In a field experiment on a phosphorus (P) deficient soil in south-western Australia, lupin seed (Lupinus angustifolius cv. Danja) of the same size (157 mg/seed) but with 2 different phosphorus (P) concentrations in the seed (2.0 and 2.8 g P/kg) was sown with 4 levels of superphosphate (5, 20, 40 and 60 kg P/ha) drilled with the seed in May 1988 to examine the effect of seed P concentration on subsequent dry matter (DM) and grain yields. Increasing the amount of superphosphate applied from 5 to 60 kg P/ha almost doubled yields. In addition, lupins grown from seed containing the higher P concentration produced larger yields of dried whole tops in early August (69-day-old) for all levels of superphosphate drilled with the seed, the difference decreasing from about 45 to 10% as the level of superphosphate increased from 5 to 60 kg P/ha. By maturity (mid- November), however, plants grown from seed containing the higher P concentration in seed produced higher DM yields of tops and grain only when 5 and 20 kg P/ha superphosphate was drilled with the seed, the differences being about 40 and 20%, respectively.

Productivity of crops grown on raised beds on duplex soils prone to waterlogging in Western Australia

2007 ◽  
Vol 47 (11) ◽  
pp. 1368 ◽  
Author(s):  
D. M. Bakker ◽  
G. J. Hamilton ◽  
D. J. Houlbrooke ◽  
C. Spann ◽  
A. Van Burgel
Keyword(s):  
Grain Yield ◽  
Western Australia ◽  
Arable Land ◽  
Experimental Period ◽  
Grain Yields ◽  
Yield Increase ◽  
Field Peas ◽  
Yield Difference ◽  
Raised Bed ◽  
Flat Ground

Waterlogging of duplex soils in Western Australia has long been recognised as a major constraint to the production of agricultural crops and pastures. The work described in this paper examines the application of raised beds to arable land that is frequently waterlogged for the production of crops such as wheat, barley, field peas, lupins and canola. Raised beds are 138 cm wide, seed beds separated by 45 cm wide furrows 183 cm apart. These beds were made with a commercial bed former. Seven sites were selected across the south-eastern wheat belt of Western Australia with the experimental areas varying in size from 10 to 57 ha. These large sites were used to accommodate commercial farm machinery. Each site had raised beds formed with a commercial bedformer. The production from the bedded areas was compared with crops grown conventionally on flat ground under minimum tillage as the control. The experiments were established in 1997 and 1998 and the sites were monitored for a maximum of 5 years. In 11 of the 28 site-years of the experiments, grain yields on the raised beds were statistically significantly higher than the yield from crops grown on the control, with an average yield increase of 0.48 t/ha. Across the whole dataset, growing crops on raised beds did not produce significantly lower yields. Below average rainfall was received for much of the experimental period at several sites. Growing season rainfall had a large effect on grain yield and high rainfall over a period of 40 days after seeding significantly increased the grain yield difference between the raised bed and the control. These data indicate that the use of raised beds lead to higher grain yields when seasonal conditions are appropriate.

Effectiveness of soil dressings and foliar sprays of copper sulphate in correcting copper deficiency of wheat (Triticum aestivum) in Queensland

1980 ◽  
Vol 20 (107) ◽  
pp. 717 ◽  
Author(s):  
NJ Grundon
Keyword(s):  
Grain Yield ◽  
Copper Sulphate ◽  
Dry Matter ◽  
Copper Deficiency ◽  
Stem Elongation ◽  
Foliar Spray ◽  
Cu Deficiency ◽  
Foliar Symptoms ◽  
Glasshouse Experiment ◽  
Vegetative And Reproductive Growth

One field and two glasshouse trials were conducted to test the effectiveness of soil and foliar applications of copper sulphate in correcting copper deficiency of wheat on a severely deficient, nearneutral clay soil in the Western Downs region of Queensland. In the field, when wheat was stressed for water from late tillering (Feekes stage 5) to anthesis (Feekes stage 11) , soil dressings of 2.5-10.0 kg CuSO4.5H2O ha-1 increased early vegetative growth but foliar symptoms of copper deficiency reappeared during stem elongation, and grain yields were negligible at all rates. A single foliar spray of 2% CuSO4.5H2O applied at mid-tillering (Feekes stage 3) also did not correct the deficiency completely: foliar symptoms reappeared and grain yield was low (141 kg ha-1). A double spray treatment, the first applied at mid-tillering and the second just before booting (Feekes stage 10), was more effective and resulted in a grain yield of 800 kg ha-1. In a glasshouse experiment supplied with adequate water, a soil dressing equivalent to 16 kg CuSO4.5H2O ha-1 (3.2 mg Culpot) completely corrected the deficiency. In a second glasshouse experiment, 2% CuSO4.5H2O solution was applied as single sprays at Feekes stages 3, 8, 9, 10 or 11, or as double sprays at Feekes stages 3 + 8, 3 + 9, 3 + 10 or 3 + 11. The most effective single spray was that applied at Feekes stage 10, but maximum dry matter and grain yield were obtained when a double spray was applied at Feekes stage 3 + 10. The effectiveness of soil and foliar applications of CuSO4.5H2O for correcting Cu deficiency of dryland wheat in Queensland soils are discussed in relation to water regime and supplying adequate Cu for both vegetative and reproductive growth.

Growth, yield and neurotoxin (ODAP) concentration of three Lathyrus species in mediterranean-type environments of Western Australia

1996 ◽  
Vol 36 (2) ◽  
pp. 209 ◽  
Author(s):  
KHM Siddique ◽  
SP Loss ◽  
SP Herwig ◽  
JM Wilson
Keyword(s):  
Grain Yield ◽  
Western Australia ◽  
Growth Yield ◽  
Farming Systems ◽  
Grain Legumes ◽  
Field Pea ◽  
Grain Yields ◽  
Pisum Sativum L ◽  
Lathyrus Sativus L ◽  
Western Australian

The growth, phenology, grain yield and neurotoxin (ODAP) content of Lathyrus sativus, L. cicera and L. ochrus were compared with a locally adapted field pea (Pisum sativum L.) to examine their potential as grain legumes in Western Australian farming systems. About 17 lines of each species were obtained from ICARDA, Syria, and grown at 3 agro-climatically different sites. In general, the 3 species were later flowering than field pea, especially L. cicera and L. ochrus; however, L. sativus was the last species to mature. The best Lathyrus lines produced biomass near flowering similar to field pea. At the most favourable site, grain yields were up to 1.6, 2.6 and 1.7 t/ha for L. sativus, L. cicera and L. ochrus respectively, compared with a field pea grain yield of 3.1 t/ha. There was considerable genotype and environmental variation in ODAP concentration in the seed. On average, the ODAP concentration of L. ochrus (6.58 mg/g) was about twice that of L. sativus, and L. cicera had the lowest ODAP concentration (1.31 mg/g). Given that Lathyrus spp. have not had the same breeding effort as field pea and other grain legumes in Australia, these results encourage further selection or breeding. In the shor-tseasoned, mediterranean-type environment of Western Australia, harvest indices and grain yields could be improved with early flowering. Low ODAP concentration should also be sought.

Relative effectiveness of various sources, methods, times and rates of copper fertilizers in improving grain yield of wheat on a Cu-deficient soil

2005 ◽  
Vol 85 (1) ◽  
pp. 59-65 ◽  
Author(s):  
S. S. Malhi ◽  
L. Cowell ◽  
H. R. Kutcher
Keyword(s):  
Grain Yield ◽  
Protein Concentration ◽  
Growth Stage ◽  
Foliar Application ◽  
Leaf Growth ◽  
Flag Leaf ◽  
Relative Effectiveness ◽  
Growing Season ◽  
Growth Stages ◽  
Cu Deficiency

A field experiment was conducted to determine the relative effectiveness of various sources, methods, times and rates of Cu fertilizers on grain yield, protein concentration in grain, concentration of Cu in grain and uptake of Cu in grain of wheat (Triticum aestivum L.), and residual concentration of DTPA-extractable Cu in soil on a Cu-deficient soil near Porcupine Plain in northeastern Saskatchewan. The experiment was conducted from 1999 to 2002 on the same site, but the results for 2002 were not presented because of very low grain yield due to drought in the growing season. The 25 treatments included soil application of four granular Cu fertilizers (Cu lignosulphonate, Cu sulphate, Cu oxysulphate I and Cu oxysulphate II) as soil-incorporated (at 0.5 and 2.0 kg Cu ha-1), seedrow-placed (at 0.25 and 1.0 kg Cu ha-1) and foliar application of four solution Cu fertilizers (Cu chelate-EDTA, Cu sequestered I, Cu sulphate/chelate and Cu sequestered II at 0.25 kg Cu ha-1) at the four-leaf and flag-leaf growth stages, plus a zero-Cu check. Soil was tilled only once to incorporate all designated Cu and blanket fertilizers into the soil a few days prior to seeding. Wheat plants in the zero-Cu treatment exhibited Cu deficiency in all years. For foliar application at the flag-leaf stage, grain yield increased with all four of the Cu fertilizers in 2000 and 2001, and in all but Cu sequestered II in 1999. Foliar application at the four-leaf growth stage of three Cu fertilizers (Cu chelate-EDTA, Cu sequestered I and Cu sulphate/chelate), soil incorporation of all Cu fertilizers at 2 kg Cu ha-1 and two Cu fertilizers (Cu lignosulphonate and Cu sulphate) at 0.5 kg Cu ha-1 rate, and seedrow placement of two Cu fertilizers (Cu lignosulphonate and Cu sulphate) at 1 kg Cu ha-1 increased grain yield of wheat only in 2001. There was no effect of Cu fertilization on protein concentration in grain. The increase in concentration and uptake of Cu in grain from Cu fertilization usually showed a trend similar to grain yield. There was some increase in residual DTPA-extractable Cu in the 0–60 cm soil in Cu lignosulphonate, Cu sulphate and Cu oxysulphate II soil incorporation treatments, particularly at the 2 kg Cu ha-1 rate. In summary, the results indicate that foliar application of Cu fertilizers at the flag-leaf growth stage can be used for immediate correction of Cu deficiency in wheat. Because Cu deficiency in crops often occurs in irregular patches within fields, foliar application may be the most practical and economical way to correct Cu deficiency during the growing season, as lower Cu rates can correct Cu deficiency. Key words: Application time, Cu source, foliar application, granular Cu, growth stage, placement method, rate of Cu, seedrow-placed Cu, soil incorporation

Diagnosis of copper deficiency in wheat by plant analysis

1984 ◽  
Vol 35 (3) ◽  
pp. 347 ◽  
Author(s):  
AD Robson ◽  
JF Loneragan ◽  
JW Gartrell ◽  
K Snowball
Keyword(s):  
Water Stress ◽  
Grain Yield ◽  
Copper Deficiency ◽  
Critical Concentration ◽  
Dry Weight ◽  
Average Concentration ◽  
Copper Status ◽  
Young Leaves ◽  
The Relationship ◽  
Accurate Indicator

A glasshouse experiment was conducted to define critical concentrations of copper in young leaves of wheat and to investigate the effect of water stress after anthesis on the relationship between yield and copper concentrations in young leaves. The concentration of copper in the youngest fully emerged leaf was a sensitive and accurate indicator of the copper status of wheat. The critical concentration for copper in the youngest fully emerged leaf did not change with the age of the plant. Copper deficiency occurred whenever the concentration of copper in the youngest fully emerged leaf fell below 1.3 �g g-I (dry weight). Water stress after anthesis did not change the relationship between copper concentrations in young leaves and grain yield, although this stress markedly decreased grain yield. In the field there was considerable variability among plants given the same copper treatment in copper concentrations in young leaves. Nevertheless, whenever copper deficiency decreased growth, the average concentration of copper in the youngest fully emerged leaf was less than 1.3 �g g-1.

Low nodulation and nitrogen fixation of mungbean reduce biomass and grain yields

2005 ◽  
Vol 45 (3) ◽  
pp. 269 ◽  
Author(s):  
D. F. Herridge ◽  
M. J. Robertson ◽  
B. Cocks ◽  
M. B. Peoples ◽  
J. F. Holland ◽  
...  
Keyword(s):  
Nitrogen Fixation ◽  
Grain Yield ◽  
New South ◽  
New South Wales ◽  
Soil Nitrate ◽  
Grain Yields ◽  
South Wales ◽  
Negative Effect ◽  
On Farm ◽  
The Relationship

Apparent nodulation failures and associated low grain yields have been reported for commercial mungbean (Vigna radiata) crops in southern Queensland and northern New South Wales. We therefore conducted on-farm surveys of 40 commercial mungbean crops in the region in which symbiotic traits, i.e. nodulation and nitrogen fixation, and biomass and grain yield were monitored. Effects of bradyrhizobial inoculation and inoculation methods on mungbean and soybean (Glycine max) symbiosis and yield were determined in experiments at 3 sites in northern New South Wales. Thirty-four of the 35 mungbean crops assessed for nodulation were nodulated. The relationship between soil nitrate to a depth of 90 cm at sowing and mungbean nodulation was not significant. However, at low-to-moderate soil nitrate levels (<100 kg N/ha), the mean nodule score was 1.6, compared with 0.5 at high (>100 kg N/ha) soil nitrate levels. Soil nitrate had a negative effect on the percentage of mungbean nitrogen derived from nitrogen fixation (%Ndfa). Mean %Ndfa values for soil nitrate levels <50, >50–100 and >100 kg N/ha were 35, 22 and 19% respectively. Grain yields of the surveyed mungbean crops varied from 0.3 to 2.1 t/ha, and were correlated with shoot dry matter. Grain yield was not significantly correlated either with sowing soil nitrate, nodule score or %Ndfa. In the inoculation experiments, mungbean did not nodulate as well as soybean, producing about one-third the number of nodules. Both species responded to inoculation with increased nodulation, although data from one of the sites suggested that responses during early growth of mungbean were not maintained during pod-fill. Effects of inoculation on mungbean %Ndfa were marginal. Average increases were 9%, based on natural 15N abundance, and 6%, based on the ureide method. Soybean %Ndfa, on the other hand, responded strongly to inoculation, with increases of 56 (15N) and 77% (ureide). Inoculation increased mungbean crop N by an average of 10% and grain yield by 6%, compared with responses to fertiliser nitrogen of 31% (crop N) and 10% (grain yield). For soybean, inoculation increased crop nitrogen by 43% and grain yield by 7%, similar to responses to fertiliser nitrogen of 45 (crop N) and 5% (grain yield). These results suggest that inoculated mungbean was N-limited and that inoculation of mungbean using current technology may be somewhat ineffectual. We concluded that low nodulation and nitrogen fixation of commercial mungbean most likely results from the suppressive effects of nitrate and/or insufficient numbers of bradyrhizobia in the soil. When low symbiosis and low soil nitrate are combined, N is likely to limit crop growth, and potentially grain yield. Suggested strategies for improving mungbean nodulation and nitrogen fixation in the northern grains belt include selection of more symbiotically competent plant and bradyrhizobial genotypes and more effective utilisation of established soil populations of mungbean bradyrhizobia.

Some relationships between plant population, yield components and grain yield of wheat in a Mediterranean environment

1986 ◽  
Vol 37 (3) ◽  
pp. 219 ◽  
Author(s):  
WK Anderson
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Plant Density ◽  
Plant Population ◽  
Individual Plant ◽  
Spring Bread Wheat ◽  
Grain Yields ◽  
Optimum Population ◽  
Large Numbers ◽  
The Relationship

Eight spring bread wheat cultivars (Triticum aestivum L.), differing widely in their nominal yield component characteristics, were tested under rain-fed conditions for three years at sowing densities ranging from 50 to 800 seeds m-2. The objectives of the experiments were to estimate the relationship between grain yield and particular yield components, the expression of plant type (yield components) in relation to plant density, and the plant population x cultivar interaction for grain yield over a range of seasons in a given environment. The 'optimum' plant population (at maximum grain yield) varied over 30-220 plants m-2, depending on season and cultivar. In general, variation in the 'optimum' population was greater between seasons for a given cultivar than between cultivars within seasons. The relationship between grain yield and yield components was examined at the 'optimum' population rather than at an arbitrary population at which grain yield may have been suboptimal for some cultivars or seasons. Grain yields at the optimum populations for the various cultivar x season combinations were positively related to culms m-2, spikes m-2 and seeds m-2. They were not clearly related to culm mortality (%). When averaged across seasons, cultivar grain yields were positively related to harvest index, but the general relationship was not so clear when seasons and cultivars were examined individually. Spike size (seeds spike-I or spike weight) and seed size were also not clearly related to grain yield at the 'optimum' population, and it was thus postulated that the production and survival of large numbers of culms, which in turn led to large numbers of seeds per unit area, were the source of large grain yields. Some interactions were found between yield components and plant population for some cultivars that could have implications for plant breeders selecting at low plant densities. The implications for crop ideotypes of the individual plant characters at the 'optimum' population are also discussed. Interactions between cultivars and plant populations implied that some cultivars required different populations to achieve maximum yields in some seasons. There was a tendency for larger yields to be achieved from cultivar x season combinations where the optimum population was larger, which suggested that commercial seed rates should be re-examined when changes to plant types or yield levels are made.

Sign in / Sign up

Export Citation Format

Share Document