121 THREE-DIMENSIONAL ASSESSMENT OF EARLY CORPUS LUTEUM VASCULARITY IN BUFFALO (BUBALUS BUBALIS)

2017 ◽  
Vol 29 (1) ◽  
pp. 169
Author(s):  
S. Caunce ◽  
D. Dadarwal ◽  
G. Adams ◽  
P. Brar ◽  
J. Singh

The aim of the study was to develop an objective method to assess the vascular flow to the early corpus luteum (CL) in buffaloes using colour Doppler ultrasound data. Our hypothesis was that 3-dimensional (3D) volumetric analysis of vascularity would demonstrate lower variability between animals compared with conventional 2-dimensional (2D) analysis of single images. Wave emergence and ovulation was synchronized in buffalo (n = 16) using prostaglandin-GnRH based protocols. Colour Doppler ultrasonography (MyLab5, 7.5-MHz linear array, colour gain 65%) was performed daily from Day −2 to 4 (Day 0 = ovulation). Video clips of the ovaries (20 s at 18–28 frames per second, AVI) were recorded by slow and uniform free-hand movement of the transducer. Day 4 CL was used for analysis of vascular area and volume. For 2D vascularity assessment, 3 images (800 × 652 pixels, RGB, BMP) of each CL (at maximum apparent vascularity) were acquired through the clip image function on the ultrasound machine and analysed by ImageJ (Fiji) software (NIH, Bethesda, MD, USA). For 3D vascularity assessment, a portion of the video clip encompassing an entire ovary was identified and exported as a series of 2D TIFF images using Videomach software. The ultrasound scale bar was used to calculate the number of pixels per millimetre and to calibrate the X (horizontal) and Y (vertical) dimensions. For 2D analyses, the CL boundary was drawn using the free-hand manual selection tool in Fiji, the area of the CL (mm2) was recorded, and the border was then enlarged by 1.5 mm to include the peripheral vascular region of the CL. The colour threshold was adjusted to select the vascular region. The 2D vascularity score was calculated as the ratio of the coloured area to the enlarged luteal area. For 3D volumetric analyses, each series of TIFF images was imported as an image sequence in Fiji and colour thresholding (similar to 2D analysis) was applied to save a second TIFF series containing luteal vascular regions (coloured areas) only. The remaining volumetric analyses were completed in Imaris software using the ovarian volume (original TIFF series) and luteal vascular volume (second TIFF series) as separate channels. The Z-dimension thickness of each image was estimated by using the dimensions of a follicle within the same ovary (Z-axis diameter = mean diameter along X- and Y-axes). Similar to 2D analyses, the volume of the CL was obtained by drawing a border along the edge of the CL, the CL border was enlarged by 1.5 mm, and a 3D vascularity score was obtained by building a surface on the luteal vascular image and calculating the vascular to luteal volume ratio. The 2D vascularity score differed from 3D vascularity score (0.21 ± 0.02 v. 0.13 ± 0.02, paired t-test P < 0.01); however, variance did not differ (Bartlett’s test P = 0.32). Our initial results support the notion that the described technique of quantifying vascular volume of the corpus luteum may decrease the technical variability during image assessment and therefore better reflect the true vascularity compared with 2D image analyses. Research was supported by a grant from the Natural Sciences and Engineering Research Council of Canada.

Pharmaceutics ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 316
Author(s):  
Samantha Lo ◽  
Mh Busra Fauzi

Tissue engineering technology is a promising alternative approach for improvement in health management. Biomaterials play a major role, acting as a provisional bioscaffold for tissue repair and regeneration. Collagen a widely studied natural component largely present in the extracellular matrix (ECM) of the human body. It provides mechanical stability with suitable elasticity and strength to various tissues, including skin, bone, tendon, cornea and others. Even though exogenous collagen is commonly used in bioscaffolds, largely in the medical and pharmaceutical fields, nano collagen is a relatively new material involved in nanotechnology with a plethora of unexplored potential. Nano collagen is a form of collagen reduced to a nanoparticulate size, which has its advantages over the common three-dimensional (3D) collagen design, primarily due to its nano-size contributing to a higher surface area-to-volume ratio, aiding in withstanding large loads with minimal tension. It can be produced through different approaches including the electrospinning technique to produce nano collagen fibres resembling natural ECM. Nano collagen can be applied in various medical fields involving bioscaffold insertion or fillers for wound healing improvement; skin, bone, vascular grafting, nerve tissue and articular cartilage regeneration as well as aiding in drug delivery and incorporation for cosmetic purposes.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1109
Author(s):  
Varnakavi. Naresh ◽  
Nohyun Lee

A biosensor is an integrated receptor-transducer device, which can convert a biological response into an electrical signal. The design and development of biosensors have taken a center stage for researchers or scientists in the recent decade owing to the wide range of biosensor applications, such as health care and disease diagnosis, environmental monitoring, water and food quality monitoring, and drug delivery. The main challenges involved in the biosensor progress are (i) the efficient capturing of biorecognition signals and the transformation of these signals into electrochemical, electrical, optical, gravimetric, or acoustic signals (transduction process), (ii) enhancing transducer performance i.e., increasing sensitivity, shorter response time, reproducibility, and low detection limits even to detect individual molecules, and (iii) miniaturization of the biosensing devices using micro-and nano-fabrication technologies. Those challenges can be met through the integration of sensing technology with nanomaterials, which range from zero- to three-dimensional, possessing a high surface-to-volume ratio, good conductivities, shock-bearing abilities, and color tunability. Nanomaterials (NMs) employed in the fabrication and nanobiosensors include nanoparticles (NPs) (high stability and high carrier capacity), nanowires (NWs) and nanorods (NRs) (capable of high detection sensitivity), carbon nanotubes (CNTs) (large surface area, high electrical and thermal conductivity), and quantum dots (QDs) (color tunability). Furthermore, these nanomaterials can themselves act as transduction elements. This review summarizes the evolution of biosensors, the types of biosensors based on their receptors, transducers, and modern approaches employed in biosensors using nanomaterials such as NPs (e.g., noble metal NPs and metal oxide NPs), NWs, NRs, CNTs, QDs, and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.


2006 ◽  
Vol 163 (7) ◽  
pp. 1252-1263 ◽  
Author(s):  
M. Mehmet Haznedar ◽  
Monte S. Buchsbaum ◽  
Erin A. Hazlett ◽  
Elizabeth M. LiCalzi ◽  
Charles Cartwright ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nishchay A. Isaac ◽  
Johannes Reiprich ◽  
Leslie Schlag ◽  
Pedro H. O. Moreira ◽  
Mostafa Baloochi ◽  
...  

AbstractThis study demonstrates the fabrication of self-aligning three-dimensional (3D) platinum bridges for ammonia gas sensing using gas-phase electrodeposition. This deposition scheme can guide charged nanoparticles to predetermined locations on a surface with sub-micrometer resolution. A shutter-free deposition is possible, preventing the use of additional steps for lift-off and improving material yield. This method uses a spark discharge-based platinum nanoparticle source in combination with sequentially biased surface electrodes and charged photoresist patterns on a glass substrate. In this way, the parallel growth of multiple sensing nodes, in this case 3D self-aligning nanoparticle-based bridges, is accomplished. An array containing 360 locally grown bridges made out of 5 nm platinum nanoparticles is fabricated. The high surface-to-volume ratio of the 3D bridge morphology enables fast response and room temperature operated sensing capabilities. The bridges are preconditioned for ~ 24 h in nitrogen gas before being used for performance testing, ensuring drift-free sensor performance. In this study, platinum bridges are demonstrated to detect ammonia (NH3) with concentrations between 1400 and 100 ppm. The sensing mechanism, response times, cross-sensitivity, selectivity, and sensor stability are discussed. The device showed a sensor response of ~ 4% at 100 ppm NH3 with a 70% response time of 8 min at room temperature.


Contact ◽  
2018 ◽  
Vol 1 ◽  
pp. 251525641880142
Author(s):  
Manon Rosselin ◽  
Paula Nunes-Hasler ◽  
Nicolas Demaurex

Mitochondria undergo spontaneous transient elevations in matrix pH associated with drops in mitochondrial membrane potential. These mitopHlashes require a functional respiratory chain and the profusion protein optic atrophy 1, but their mechanistic basis is unclear. To gain insight on the origin of these dynamic events, we resolved the ultrastructure of flashing mitochondria by correlative light and electron microscopy. HeLa cells expressing the matrix-targeted pH probe mitoSypHer were screened for mitopHlashes and fixed immediately after the occurrence of a flashing event. The cells were then processed for imaging by serial block face scanning electron microscopy using a focused ion beam to generate ∼1,200 slices of 10 nm thickness from a 28 µm × 15 µm cellular volume. Correlation of live/fixed fluorescence and electron microscopy images allowed the unambiguous identification of flashing and nonflashing mitochondria. Three-dimensional reconstruction and surface mapping revealed that each tomogram contained two flashing mitochondria of unequal sizes, one being much larger than the average mitochondrial volume. Flashing mitochondria were 10-fold larger than silent mitochondria but with a surface to volume ratio and a cristae volume similar to nonflashing mitochondria. Flashing mitochondria were connected by tubular structures, formed more membrane contact sites, and a constriction was observed at a junction between a flashing mitochondrion and a nonflashing mitochondrion. These data indicate that flashing mitochondria are structurally preserved and bioenergetically competent but form numerous membrane contact sites and are connected by tubular structures, consistent with our earlier suggestion that mitopHlashes might be triggered by the opening of fusion pores between contiguous mitochondria.


Compensatory movement after stroke occurred when inter-joint coordination between arm and forearm for the purpose of arm transport becomes limited due to the weaknesses of the upper limb after stroke. This limitation causes an inefficiency of hand movement to perform the activity of daily living (ADL). Previous work has shown the possibility of using Kinect to assess torso compensation in typical assessment of upper limb movement in a stroke-simulated setting using a Torso Principal Component Analysis (PCA) Model. This research extends the study into evaluating Torso PCA Model in terms of orientation angles of the torso in three dimensional when performing planar activities namely circle tracing and point-topoint tracing. The orientation angles were compared to the outcome of the measurement from a standard motion capture system and Kinect’s intrinsic chest orientation angles. Based on the statistical results, Torso PCA model is concurrently valid with the clinically accepted measures of torso orientation and can be used further to analyze torso compensation in stroke patients.


2010 ◽  
Vol 103 (5) ◽  
pp. 333-339 ◽  
Author(s):  
Zhi-Wen Zhou ◽  
Ya-Wei Xu ◽  
Muhammad Ashraf ◽  
David J. Sahn

Sign in / Sign up

Export Citation Format

Share Document