Ancient Maya wetland fields revealed under tropical forest canopy from laser scanning and multiproxy evidence

We report on a large area of ancient Maya wetland field systems in Belize, Central America, based on airborne lidar survey coupled with multiple proxies and radiocarbon dates that reveal ancient field uses and chronology. The lidar survey indicated four main areas of wetland complexes, including the Birds of Paradise wetland field complex that is five times larger than earlier remote and ground survey had indicated, and revealed a previously unknown wetland field complex that is even larger. The field systems date mainly to the Maya Late and Terminal Classic (∼1,400–1,000 y ago), but with evidence from as early as the Late Preclassic (∼1,800 y ago) and as late as the Early Postclassic (∼900 y ago). Previous study showed that these were polycultural systems that grew typical ancient Maya crops including maize, arrowroot, squash, avocado, and other fruits and harvested fauna. The wetland fields were active at a time of population expansion, landscape alteration, and droughts and could have been adaptations to all of these major shifts in Maya civilization. These wetland-farming systems add to the evidence for early and extensive human impacts on the global tropics. Broader evidence suggests a wide distribution of wetland agroecosystems across the Maya Lowlands and Americas, and we hypothesize the increase of atmospheric carbon dioxide and methane from burning, preparing, and maintaining these field systems contributed to the Early Anthropocene.

Download Full-text

Long-Term Impacts of Selective Logging on Amazon Forest Dynamics from Multi-Temporal Airborne LiDAR

Remote Sensing ◽

10.3390/rs11060709 ◽

2019 ◽

Vol 11 (6) ◽

pp. 709 ◽

Cited By ~ 10

Author(s):

Ekena Rangel Pinagé ◽

Michael Keller ◽

Paul Duffy ◽

Marcos Longo ◽

Maiza dos-Santos ◽

...

Keyword(s):

Laser Scanning ◽

Forest Canopy ◽

Binary Classification ◽

Forest Degradation ◽

Selective Logging ◽

Ecological Impacts ◽

Airborne Lidar ◽

Classification Model ◽

Amazon Forest ◽

Gap Formation

Forest degradation is common in tropical landscapes, but estimates of the extent and duration of degradation impacts are highly uncertain. In particular, selective logging is a form of forest degradation that alters canopy structure and function, with persistent ecological impacts following forest harvest. In this study, we employed airborne laser scanning in 2012 and 2014 to estimate three-dimensional changes in the forest canopy and understory structure and aboveground biomass following reduced-impact selective logging in a site in Eastern Amazon. Also, we developed a binary classification model to distinguish intact versus logged forests. We found that canopy gap frequency was significantly higher in logged versus intact forests even after 8 years (the time span of our study). In contrast, the understory of logged areas could not be distinguished from the understory of intact forests after 6–7 years of logging activities. Measuring new gap formation between LiDAR acquisitions in 2012 and 2014, we showed rates 2 to 7 times higher in logged areas compared to intact forests. New gaps were spatially clumped with 76 to 89% of new gaps within 5 m of prior logging damage. The biomass dynamics in areas logged between the two LiDAR acquisitions was clearly detected with an average estimated loss of −4.14 ± 0.76 MgC ha−1 y−1. In areas recovering from logging prior to the first acquisition, we estimated biomass gains close to zero. Together, our findings unravel the magnitude and duration of delayed impacts of selective logging in forest structural attributes, confirm the high potential of airborne LiDAR multitemporal data to characterize forest degradation in the tropics, and present a novel approach to forest classification using LiDAR data.

Download Full-text

Optimizing the Remote Detection of Tropical Rainforest Structure with Airborne Lidar: Leaf Area Profile Sensitivity to Pulse Density and Spatial Sampling

Remote Sensing ◽

10.3390/rs11010092 ◽

2019 ◽

Vol 11 (1) ◽

pp. 92 ◽

Cited By ~ 20

Author(s):

Danilo Roberti Alves de Almeida ◽

Scott C. Stark ◽

Gang Shao ◽

Juliana Schietti ◽

Bruce Walker Nelson ◽

...

Keyword(s):

Grain Size ◽

Leaf Area ◽

Laser Scanning ◽

Forest Canopy ◽

Primary Source ◽

Airborne Lidar ◽

Area Index ◽

Pulse Density ◽

Optimal Values ◽

And Function

Airborne Laser Scanning (ALS) has been considered as a primary source to model the structure and function of a forest canopy through the indicators leaf area index (LAI) and vertical canopy profiles of leaf area density (LAD). However, little is known about the effects of the laser pulse density and the grain size (horizontal binning resolution) of the laser point cloud on the estimation of LAD profiles and their associated LAIs. Our objective was to determine the optimal values for reliable and stable estimates of LAD profiles from ALS data obtained over a dense tropical forest. Profiles were compared using three methods: Destructive field sampling, Portable Canopy profiling Lidar (PCL) and ALS. Stable LAD profiles from ALS, concordant with the other two analytical methods, were obtained when the grain size was less than 10 m and pulse density was high (>15 pulses m−2). Lower pulse densities also provided stable and reliable LAD profiles when using an appropriate adjustment (coefficient K). We also discuss how LAD profiles might be corrected throughout the landscape when using ALS surveys of lower density, by calibrating with LAI measurements in the field or from PCL. Appropriate choices of grain size, pulse density and K provide reliable estimates of LAD and associated tree plot demography and biomass in dense forest ecosystems.

Download Full-text

Creating Landscape-Scale Site Index Maps for the Southeastern US Is Possible with Airborne LiDAR and Landsat Imagery

Forests ◽

10.3390/f10030234 ◽

2019 ◽

Vol 10 (3) ◽

pp. 234 ◽

Cited By ~ 2

Author(s):

Ranjith Gopalakrishnan ◽

Jobriath Kauffman ◽

Matthew Fagan ◽

John Coulston ◽

Valerie Thomas ◽

...

Keyword(s):

Loblolly Pine ◽

Laser Scanning ◽

Landsat Imagery ◽

Site Index ◽

Airborne Lidar ◽

Stand Age ◽

Forest Site ◽

Large Area ◽

Southeastern Us ◽

Index Maps

Sustainable forest management is hugely dependent on high-quality estimates of forest site productivity, but it is challenging to generate productivity maps over large areas. We present a method for generating site index (a measure of such forest productivity) maps for plantation loblolly pine (Pinus taeda L.) forests over large areas in the southeastern United States by combining airborne laser scanning (ALS) data from disparate acquisitions and Landsat-based estimates of forest age. For predicting canopy heights, a linear regression model was developed using ALS data and field measurements from the Forest Inventory and Analysis (FIA) program of the US Forest Service (n = 211 plots). The model was strong (R2 = 0.84, RMSE = 1.85 m), and applicable over a large area (~208,000 sq. km). To estimate the site index, we combined the ALS estimated heights with Landsat-derived maps of stand age and planted pine area. The estimated bias was low (−0.28 m) and the RMSE (3.8 m, relative RMSE: 19.7%, base age 25 years) was consistent with other similar approaches. Due to Landsat-related constraints, our methodology is valid only for relatively young pine plantations established after 1984. We generated 30 m resolution site index maps over a large area (~832 sq. km). The site index distribution had a median value of 19.4 m, the 5th percentile value of 13.0 m and the 95th percentile value of 23.3 m. Further, using a watershed level analysis, we ranked these regions by their estimated productivity. These results demonstrate the potential and value of remote sensing based large-area site index maps.

Download Full-text

APPLICABILITY ANALYSIS OF CLOTH SIMULATION FILTERING ALGORITHM FOR MOBILE LIDAR POINT CLOUD

ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences ◽

10.5194/isprs-archives-xlii-3-107-2018 ◽

2018 ◽

Vol XLII-3 ◽

pp. 107-111 ◽

Cited By ~ 1

Author(s):

S. Cai ◽

W. Zhang ◽

J. Qi ◽

P. Wan ◽

J. Shao ◽

...

Keyword(s):

Point Cloud ◽

Laser Scanning ◽

Three Dimensional ◽

Point Clouds ◽

Airborne Lidar ◽

Cloth Simulation ◽

Large Area ◽

Three Samples ◽

Separate Point ◽

A New Technique

Classifying the original point clouds into ground and non-ground points is a key step in LiDAR (light detection and ranging) data post-processing. Cloth simulation filtering (CSF) algorithm, which based on a physical process, has been validated to be an accurate, automatic and easy-to-use algorithm for airborne LiDAR point cloud. As a new technique of three-dimensional data collection, the mobile laser scanning (MLS) has been gradually applied in various fields, such as reconstruction of digital terrain models (DTM), 3D building modeling and forest inventory and management. Compared with airborne LiDAR point cloud, there are some different features (such as point density feature, distribution feature and complexity feature) for mobile LiDAR point cloud. Some filtering algorithms for airborne LiDAR data were directly used in mobile LiDAR point cloud, but it did not give satisfactory results. In this paper, we explore the ability of the CSF algorithm for mobile LiDAR point cloud. Three samples with different shape of the terrain are selected to test the performance of this algorithm, which respectively yields total errors of 0.44&thinsp;%, 0.77&thinsp;% and1.20&thinsp;%. Additionally, large area dataset is also tested to further validate the effectiveness of this algorithm, and results show that it can quickly and accurately separate point clouds into ground and non-ground points. In summary, this algorithm is efficient and reliable for mobile LiDAR point cloud.

Download Full-text

Urban energetics applications and Geomatic technologies in a Smart City perspective

International Review of Applied Sciences and Engineering ◽

10.1556/1848.2015.6.1.3 ◽

2015 ◽

Vol 6 (1) ◽

pp. 19-29 ◽

Cited By ~ 3

Author(s):

G. Bitelli ◽

P. Conte ◽

T. Csoknyai ◽

E. Mandanici

Keyword(s):

Smart City ◽

Laser Scanning ◽

Near Infrared ◽

Three Dimensional ◽

Energy Sector ◽

Primary Objective ◽

Airborne Lidar ◽

City Management ◽

Urban Context ◽

Research Areas

The management of an urban context in a Smart City perspective requires the development of innovative projects, with new applications in multidisciplinary research areas. They can be related to many aspects of city life and urban management: fuel consumption monitoring, energy efficiency issues, environment, social organization, traffic, urban transformations, etc. Geomatics, the modern discipline of gathering, storing, processing, and delivering digital spatially referenced information, can play a fundamental role in many of these areas, providing new efficient and productive methods for a precise mapping of different phenomena by traditional cartographic representation or by new methods of data visualization and manipulation (e.g. three-dimensional modelling, data fusion, etc.). The technologies involved are based on airborne or satellite remote sensing (in visible, near infrared, thermal bands), laser scanning, digital photogrammetry, satellite positioning and, first of all, appropriate sensor integration (online or offline). The aim of this work is to present and analyse some new opportunities offered by Geomatics technologies for a Smart City management, with a specific interest towards the energy sector related to buildings. Reducing consumption and CO2 emissions is a primary objective to be pursued for a sustainable development and, in this direction, an accurate knowledge of energy consumptions and waste for heating of single houses, blocks or districts is needed. A synoptic information regarding a city or a portion of a city can be acquired through sensors on board of airplanes or satellite platforms, operating in the thermal band. A problem to be investigated at the scale A problem to be investigated at the scale of the whole urban context is the Urban Heat Island (UHI), a phenomenon known and studied in the last decades. UHI is related not only to sensible heat released by anthropic activities, but also to land use variations and evapotranspiration reduction. The availability of thermal satellite sensors is fundamental to carry out multi-temporal studies in order to evaluate the dynamic behaviour of the UHI for a city. Working with a greater detail, districts or single buildings can be analysed by specifically designed airborne surveys. The activity has been recently carried out in the EnergyCity project, developed in the framework of the Central Europe programme established by UE. As demonstrated by the project, such data can be successfully integrated in a GIS storing all relevant data about buildings and energy supply, in order to create a powerful geospatial database for a Decision Support System assisting to reduce energy losses and CO2 emissions. Today, aerial thermal mapping could be furthermore integrated by terrestrial 3D surveys realized with Mobile Mapping Systems through multisensor platforms comprising thermal camera/s, laser scanning, GPS, inertial systems, etc. In this way the product can be a true 3D thermal model with good geometric properties, enlarging the possibilities in respect to conventional qualitative 2D images with simple colour palettes. Finally, some applications in the energy sector could benefit from the availability of a true 3D City Model, where the buildings are carefully described through three-dimensional elements. The processing of airborne LiDAR datasets for automated and semi-automated extraction of 3D buildings can provide such new generation of 3D city models.

Download Full-text

Terrestrial Laser Scanning for Vegetation Analyses with a Special Focus on Savannas

Remote Sensing ◽

10.3390/rs13030507 ◽

2021 ◽

Vol 13 (3) ◽

pp. 507

Author(s):

Tasiyiwa Priscilla Muumbe ◽

Jussi Baade ◽

Jenia Singh ◽

Christiane Schmullius ◽

Christian Thau

Keyword(s):

Remote Sensing ◽

Vegetation Structure ◽

Laser Scanning ◽

Spatial Scales ◽

Terrestrial Laser Scanning ◽

Point Clouds ◽

Parameter Extraction ◽

Airborne Lidar ◽

Special Focus ◽

Vegetation Parameter

Savannas are heterogeneous ecosystems, composed of varied spatial combinations and proportions of woody and herbaceous vegetation. Most field-based inventory and remote sensing methods fail to account for the lower stratum vegetation (i.e., shrubs and grasses), and are thus underrepresenting the carbon storage potential of savanna ecosystems. For detailed analyses at the local scale, Terrestrial Laser Scanning (TLS) has proven to be a promising remote sensing technology over the past decade. Accordingly, several review articles already exist on the use of TLS for characterizing 3D vegetation structure. However, a gap exists on the spatial concentrations of TLS studies according to biome for accurate vegetation structure estimation. A comprehensive review was conducted through a meta-analysis of 113 relevant research articles using 18 attributes. The review covered a range of aspects, including the global distribution of TLS studies, parameters retrieved from TLS point clouds and retrieval methods. The review also examined the relationship between the TLS retrieval method and the overall accuracy in parameter extraction. To date, TLS has mainly been used to characterize vegetation in temperate, boreal/taiga and tropical forests, with only little emphasis on savannas. TLS studies in the savanna focused on the extraction of very few vegetation parameters (e.g., DBH and height) and did not consider the shrub contribution to the overall Above Ground Biomass (AGB). Future work should therefore focus on developing new and adjusting existing algorithms for vegetation parameter extraction in the savanna biome, improving predictive AGB models through 3D reconstructions of savanna trees and shrubs as well as quantifying AGB change through the application of multi-temporal TLS. The integration of data from various sources and platforms e.g., TLS with airborne LiDAR is recommended for improved vegetation parameter extraction (including AGB) at larger spatial scales. The review highlights the huge potential of TLS for accurate savanna vegetation extraction by discussing TLS opportunities, challenges and potential future research in the savanna biome.

Download Full-text

Novel Application and Validation of a Method to Assess Visual Impacts of Rotating Wind Turbine Blades Within Woodland Areas

PFG – Journal of Photogrammetry Remote Sensing and Geoinformation Science ◽

10.1007/s41064-021-00141-4 ◽

2021 ◽

Vol 89 (1) ◽

pp. 1-14

Author(s):

U. Nopp-Mayr ◽

F. Kunz ◽

F. Suppan ◽

E. Schöll ◽

J. Coppes

Keyword(s):

Environmental Impact ◽

Wind Turbine ◽

Wind Turbines ◽

Power Plants ◽

Laser Scanning ◽

Forest Canopy ◽

Turbine Blades ◽

Wind Turbine Blades ◽

Environmental Impact Assessments ◽

Independent Field

AbstractIncreasing numbers of wind power plants (WPP) are constructed across the globe to reduce the anthropogenic contribution to global warming. There are, however, concerns on the effects of WPP on human health as well as related effects on wildlife. To address potential effects of WPP in environmental impact assessments, existing models accounting for shadow flickering and noise are widely applied. However, a standardized, yet simple and widely applicable proxy for the visibility of rotating wind turbines in woodland areas was largely lacking up to date. We combined land cover information of forest canopy extracted from orthophotos and airborne laser scanning (LiDAR) data to represent the visibility of rotating wind turbines in five woodland study sites with a high spatial resolution. Performing an in-situ validation in five study areas across Europe which resulted in a unique sample of 1738 independent field observations, we show that our approach adequately predicts from where rotating wind turbine blades are visible within woodlands or not. We thus provide strong evidence, that our approach yields a valuable proxy of the visibility of moving rotor blades with high resolution which in turn can be applied in environmental impact assessments of WPP within woodlands worldwide.

Download Full-text

Leveraging TLS as a Calibration and Validation Tool for MLS and ULS Mapping of Savanna Structure and Biomass at Landscape-Scales

Remote Sensing ◽

10.3390/rs13020257 ◽

2021 ◽

Vol 13 (2) ◽

pp. 257 ◽

Cited By ~ 1

Author(s):

Shaun R. Levick ◽

Tim Whiteside ◽

David A. Loewensteiner ◽

Mitchel Rudge ◽

Renee Bartolo

Keyword(s):

Remote Sensing ◽

Vegetation Structure ◽

Laser Scanning ◽

Canopy Cover ◽

Structural Diversity ◽

Point Clouds ◽

Large Area ◽

Calibration And Validation ◽

Savanna Vegetation ◽

Landscape Scales

Savanna ecosystems are challenging to map and monitor as their vegetation is highly dynamic in space and time. Understanding the structural diversity and biomass distribution of savanna vegetation requires high-resolution measurements over large areas and at regular time intervals. These requirements cannot currently be met through field-based inventories nor spaceborne satellite remote sensing alone. UAV-based remote sensing offers potential as an intermediate scaling tool, providing acquisition flexibility and cost-effectiveness. Yet despite the increased availability of lightweight LiDAR payloads, the suitability of UAV-based LiDAR for mapping and monitoring savanna 3D vegetation structure is not well established. We mapped a 1 ha savanna plot with terrestrial-, mobile- and UAV-based laser scanning (TLS, MLS, and ULS), in conjunction with a traditional field-based inventory (n = 572 stems > 0.03 m). We treated the TLS dataset as the gold standard against which we evaluated the degree of complementarity and divergence of structural metrics from MLS and ULS. Sensitivity analysis showed that MLS and ULS canopy height models (CHMs) did not differ significantly from TLS-derived models at spatial resolutions greater than 2 m and 4 m respectively. Statistical comparison of the resulting point clouds showed minor over- and under-estimation of woody canopy cover by MLS and ULS, respectively. Individual stem locations and DBH measurements from the field inventory were well replicated by the TLS survey (R2 = 0.89, RMSE = 0.024 m), which estimated above-ground woody biomass to be 7% greater than field-inventory estimates (44.21 Mg ha−1 vs 41.08 Mg ha−1). Stem DBH could not be reliably estimated directly from the MLS or ULS, nor indirectly through allometric scaling with crown attributes (R2 = 0.36, RMSE = 0.075 m). MLS and ULS show strong potential for providing rapid and larger area capture of savanna vegetation structure at resolutions suitable for many ecological investigations; however, our results underscore the necessity of nesting TLS sampling within these surveys to quantify uncertainty. Complementing large area MLS and ULS surveys with TLS sampling will expand our options for the calibration and validation of multiple spaceborne LiDAR, SAR, and optical missions.

Download Full-text