Index number (n) measurements on BSCCO tapes using a contact-free method

2003 ◽  
Vol 16 (5) ◽  
pp. 628-631 ◽  
Author(s):  
Yinshun Wang ◽  
Yan Lu ◽  
Liye Xiao ◽  
Liangzhen Lin ◽  
Xi Xu ◽  
...  
Keyword(s):  
1997 ◽  
Vol 78 (04) ◽  
pp. 1178-1182 ◽  
Author(s):  
Timo Palosuo ◽  
Jarmo Virtamo ◽  
Jari Haukka ◽  
Philip R Taylor ◽  
Kimmo Aho ◽  
...  

SummaryAntibodies against phospholipid-binding plasma proteins, such as β2-glycoprotein I (β2-GPI) and prothrombin, are associated with thromboembolic events in patients with systemic lupus erythematosus and also in subjects with no evident underlying diseases. We wanted to examine whether increased levels of antibodies to negatively-charged phospholipids (cardiolipin), to phospholipid-binding plasma proteins β2-GPI and prothrombin and to oxidised low-density lipoprotein (LDL) were associated with risk of deep venous thrombosis or pulmonary embolism in subjects with no previous thrombosis. The antibodies were measured in stored serum samples from 265 cases of deep venous thrombosis of the lower extremity or pulmonary embolism occurring during a median follow-up of about 7 years and from 265 individually matched controls. The study subjects were middle-aged men participating in a cancer prevention trial of alpha-tocopherol and beta-carotene and the cases of thromboembolic events were identified from nationwide Hospital Discharge Register.The risk for thrombotic events was significantly increased only in relation to antiprothrombin antibodies. As adjusted for body mass index, number of daily cigarettes and history of chronic bronchitis, myocardial infarction and heart failure at baseline, the odds ratio per one unit of antibody was 6.56 (95% confidence interval 1.73-25.0). The seven highest individual optical density-unit values of antiprothrombin antibodies were all confined to subjects with thromboembolic episodes.In conclusion, the present nested case-control study showed that high autoantibody levels against prothrombin implied a risk of deep venous thrombosis and pulmonary embolism and could be involved in the development of the thrombotic processes.


2011 ◽  
Vol 2 (2) ◽  
pp. 101-105
Author(s):  
L. Fazekas ◽  
Z. S. Tiba ◽  
G. Kalácska

Abstract The lubricant storing and releasing ability of the thermally sprayed surfaces plays an essential role in the proper operation of the components. In the case of porous sprayed surfaces the lubricant storing and releasing ability depends mainly on porosity and the surface energy (adhesion susceptibility). The adhesion ability can also be expressed indirectly with an index number that is by determining the surface free energy.


2007 ◽  
Vol 148 (4) ◽  
pp. 165-171
Author(s):  
Anna Berhidi ◽  
Edit Csajbók ◽  
Lívia Vasas

Nobody doubts the importance of the scientific performance’s evaluation. At the same time its way divides the group of experts. The present study mostly deals with the models of citation-analysis based evaluation. The aim of the authors is to present the background of the best known tool – Impact factor – since, according to the authors’ experience, to the many people use without knowing it well. In addition to the „nonofficial impact factor” and Euro-factor, the most promising index-number, h-index is presented. Finally new initiation – Index Copernicus Master List – is delineated, which is suitable to rank journals. Studying different indexes the authors make a proposal and complete the method of long standing for the evaluation of scientific performance.


1995 ◽  
Vol 23 (1) ◽  
pp. 26-51 ◽  
Author(s):  
S. Kagami ◽  
T. Akasaka ◽  
H. Shiobara ◽  
A. Hasegawa

Abstract The contact deformation of a radial tire with a camber angle, has been an important problem closely related to the cornering characteristics of radial tires. The analysis of this problem has been considered to be so difficult mathematically in describing the asymmetric deformation of a radial tire contacting with the roadway, that few papers have been published. In this paper, we present an analytical approach to this problem by using a spring bedded ring model consisting of sidewall spring systems in the radial, the lateral, and the circumferential directions and a spring bed of the tread rubber, together with a ring strip of the composite belt. Analytical solutions for each belt deformation in the contact and the contact-free regions are connected by appropriate boundary conditions at both ends. Galerkin's method is used for solving the additional deflection function defined in the contact region. This function plays an important role in determining the contact pressure distribution. Numerical calculations and experiments are conducted for a radial tire of 175SR14. Good agreement between the predicted and the measured results was obtained for two dimensional contact pressure distribution and the camber thrust characterized by the camber angle.


2019 ◽  
Vol 3 ◽  
pp. 13 ◽  
Author(s):  
Vishnu Chandra ◽  
Neil Jain ◽  
Pratik Shukla ◽  
Ethan Wajswol ◽  
Sohail Contractor ◽  
...  

Objectives: The integrated interventional radiology (IR) residency has only been established relatively recently as compared to other specialties. Although some preliminary information is available based on survey data five, no comprehensive bibliometric analysis documenting the importance of the quantity and quality of research in applying to an integrated-IR program currently exists. As the first bibliometric analysis of matched IR residents, the data obtained from this study fills a gap in the literature. Materials and Methods: A list of matched residents from the 2018 integrated-IR match were identified by contacting program directors. The Scopus database was used to search for resident research information, including total publications, first-author publications, radiology-related publications, and h-indices. Each matriculating program was categorized into one of five tiers based on the average faculty Hirsch index (h-index). Results: Sixty-three programs and 117 matched residents were identified and reviewed on the Scopus database. For the 2018 cycle, 274 total publications were produced by matched applicants, with a mean of 2.34 ± 0.41 publication per matched applicant. The average h-index for matched applicants was 0.96 ± 0.13. On univariate analysis, the number of radiology-related publications, highest journal impact factor, and h-index were all associated with an increased likelihood of matching into a higher tier program (P < 0.05). Other research variables displayed no statistical significance. All applicants with PhDs matched into tier one programs. Conclusions: Research serves as an important element in successfully matching into an integrated-IR residency. h-index, number of radiology-related manuscripts, and highest journal impact factors are all positively associated with matching into a higher tier program.


2010 ◽  
Vol 113 (Special_Supplement) ◽  
pp. 9-20 ◽  
Author(s):  
Hung-Chuan Pan ◽  
Ming-Hsi Sun ◽  
Jason Sheehan ◽  
Meei-Ling Sheu ◽  
Clayton Chi-Chang Chen ◽  
...  

Object In the modern era, stereotactic radiosurgery is an important part of the multidisciplinary and multimodality approach used to treat dural carotid-cavernous fistulas (DCCFs). Based on the ease of performance of techniques to fuse cerebral angiography studies with MR images or CT scans during the radiosurgical procedure, the Gamma Knife and XKnife are 2 of the most popular radiosurgical instruments for patients with DCCF. In this study, the authors compared the efficacy, neurological results, and complications associated with these 2 radiosurgical devices when used for DCCF. Methods Records for 41 patients with DCCF (15 treated using the XKnife and 26 with Gamma Knife surgery [GKS]) were retrieved from a radiosurgical database encompassing the period of September 2000 to August 2008. Among these patients, at least 2 consecutive MR imaging or MR angiography studies obtained after radiosurgery were available for determining radiological outcome of the fistula. All patients received regular follow-up to evaluate the neurological and ophthalmological function at an interval of 1–3 months. The symptomatology, obliteration rate, radiation dose, instrument accuracy, and adverse effects were determined for each group and compared between 2 groups. The data were analyzed using the Student t-test. Results The mean age of the patients was 63 ± 2.6 years, and the mean follow-up period was 63.1 ± 4.4 months (mean ± SD). Thirty-seven patients (90%) achieved an obliteration of the DCCF (93% in the XKnife cohort and 88% for the GKS cohort). In 34 of 40 patients (85%) with chemosis and proptosis of the eyes, these symptoms were resolved after treatment (4 had residual fistula and 2 had arterializations of sclera). All 5 patients with high intraocular pressure demonstrated clinical improvement. Ten (71%) of 14 patients with cranial nerve palsy demonstrated improvement following radiosurgery. Significant discrepancies of treatment modalities existed between the XKnife and GKS groups, such as radiation volume, conformity index, number of isocenters, instrument accuracy, peripheral isodose line, and maximum dosage. The XKnife delivered significantly higher radiation dosage to the lens, optic nerve, optic chiasm, bilateral temporal lobe, and brainstem. Few adverse events occurred, but included 1 patient with optic neuritis (GKS group), 1 intracranial hemorrhage (XKnife group), 1 brainstem edema (XKnife), and 3 temporal lobe radiation edemas (XKnife). Conclusions Radiosurgery affords a substantial chance of radiological and clinical improvement in patients with DCCFs. The Gamma Knife and XKnife demonstrated similar efficacy in the obliteration of DCCFs. However, a slightly higher incidence of complications occurred in the XKnife group.


2016 ◽  
Vol 217 ◽  
pp. 100-108 ◽  
Author(s):  
J.F. Buyel ◽  
H.M. Gruchow ◽  
N. Tödter ◽  
M. Wehner

2020 ◽  
Author(s):  
Xi Long ◽  
Javier Espina ◽  
Renee A. Otte ◽  
Wenjin Wang ◽  
Ronald M. Aarts ◽  
...  

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 712
Author(s):  
Ahmed Al-Kattan ◽  
David Grojo ◽  
Christophe Drouet ◽  
Alexandros Mouskeftaras ◽  
Philippe Delaporte ◽  
...  

Driven by flexibility, precision, repeatability and eco-friendliness, laser-based technologies have attracted great interest to engineer or to analyze materials in various fields including energy, environment, biology and medicine. A major advantage of laser processing relies on the ability to directly structure matter at different scales and to prepare novel materials with unique physical and chemical properties. It is also a contact-free approach that makes it possible to work in inert or reactive liquid or gaseous environment. This leads today to a unique opportunity for designing, fabricating and even analyzing novel complex bio-systems. To illustrate this potential, in this paper, we gather our recent research on four types of laser-based methods relevant for nano-/micro-scale applications. First, we present and discuss pulsed laser ablation in liquid, exploited today for synthetizing ultraclean “bare” nanoparticles attractive for medicine and tissue engineering applications. Second, we discuss robust methods for rapid surface and bulk machining (subtractive manufacturing) at different scales by laser ablation. Among them, the microsphere-assisted laser surface engineering is detailed for its appropriateness to design structured substrates with hierarchically periodic patterns at nano-/micro-scale without chemical treatments. Third, we address the laser-induced forward transfer, a technology based on direct laser printing, to transfer and assemble a multitude of materials (additive structuring), including biological moiety without alteration of functionality. Finally, the fourth method is about chemical analysis: we present the potential of laser-induced breakdown spectroscopy, providing a unique tool for contact-free and space-resolved elemental analysis of organic materials. Overall, we present and discuss the prospect and complementarity of emerging reliable laser technologies, to address challenges in materials’ preparation relevant for the development of innovative multi-scale and multi-material platforms for bio-applications.


Sign in / Sign up

Export Citation Format

Share Document