Role of optical solitons in high speed communication systems

1995 ◽  
Vol 4 (4) ◽  
pp. 265-269 ◽  
Author(s):  
A Hasegawa
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Optical Solitons

A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater: Part I

TAPPI Journal ◽  
2009 ◽  
Vol 8 (1) ◽  
pp. 20-26 ◽  
Author(s):  
PEEYUSH TRIPATHI ◽  
MARGARET JOYCE ◽  
PAUL D. FLEMING ◽  
MASAHIRO SUGIHARA
Keyword(s):  
Boundary Layer ◽  
Experimental Design ◽  
High Speed ◽  
Statistical Study ◽  
Process Variables ◽  
High Speeds ◽  
The Stability ◽  
Air Removal ◽  
Removal System

Using an experimental design approach, researchers altered process parameters and material prop-erties to stabilize the curtain of a pilot curtain coater at high speeds. Part I of this paper identifies the four significant variables that influence curtain stability. The boundary layer air removal system was critical to the stability of the curtain and base sheet roughness was found to be very important. A shear thinning coating rheology and higher curtain heights improved the curtain stability at high speeds. The sizing of the base sheet affected coverage and cur-tain stability because of its effect on base sheet wettability. The role of surfactant was inconclusive. Part II of this paper will report on further optimization of curtain stability with these four variables using a D-optimal partial-facto-rial design.

Recent Advances in Ultra-High-Speed Waveguide Photodiodes for Optical Communication Systems

2009 ◽  
Vol E92-C (7) ◽  
pp. 922-928 ◽  
Author(s):  
Kikuo MAKITA ◽  
Kazuhiro SHIBA ◽  
Takeshi NAKATA ◽  
Emiko MIZUKI ◽  
Sawaki WATANABE
Keyword(s):  
Optical Communication ◽  
Communication Systems ◽  
High Speed ◽  
Recent Advances ◽  
Ultra High Speed ◽  
Optical Communication Systems

The Effect of Information Technology on Fluidity of Contemporary Architectural Space

2019 ◽  
Vol 7 (1) ◽  
pp. 62-72
Author(s):  
Shatha Abbas Hassan ◽  
Noor Ali Aljorani
Keyword(s):  
Information Technology ◽  
Communication Systems ◽  
Research Problem ◽  
Architectural Space ◽  
Human Thought ◽  
Technological Developments ◽  
Ease Of Access ◽  
The Impact ◽  
Role Of Information

The increasing importance of the information revolution and terms such as ‘speed’, ‘disorientation’, and ‘changing the concept of distance’, has provided us with tools that had not been previously available. Technological developments are moving toward Fluidity, which was previously unknown and cannot be understood through modern tools. With acceleration of the rhythm in the age we live in and the clarity of the role of information technology in our lives, as also the ease of access to information, has helped us to overcome many difficulties. Technology in all its forms has had a clear impact on all areas of daily life, and it has a clear impact on human thought in general, and the architectural space in particular, where the architecture moves from narrow spaces and is limited to new spaces known as the ‘breadth’, and forms of unlimited and stability to spaces characterized with fluidity. The research problem (the lack of clarity of knowledge about the impact of vast information flow associated with the technology of the age in the occurrence of liquidity in contemporary architectural space) is presented here. The research aims at defining fluidity and clarifying the effect of information technology on the changing characteristics of architectural space from solidity to fluidity. The research follows the analytical approach in tracking the concept of fluidity in physics and sociology to define this concept and then to explain the effect of Information Technology (IT) to achieve the fluidity of contemporary architectural space, leading to an analysis of the Skidmore, Owings and Merrill (SOM) architectural model. The research concludes that information technology achieves fluidity through various tools (communication systems, computers, automation, and artificial intelligence). It has changed the characteristics of contemporary architectural space and made it behave like an organism, through using smart material.

LANDSLIDE RISK MANAGEMENT IN THE COASTAL ZONE OF THE KUIBYSHEV RESERVOIR DUE THE DESIGN OF HIGH-SPEED LINE "MOSCOW-KAZAN"

2017 ◽  
Author(s):  
Nikolai Petrov ◽  
Nikolai Petrov ◽  
Inna Nikonorova ◽  
Inna Nikonorova ◽  
Vladimir Mashin ◽  
...  
Keyword(s):  
High Speed ◽  
Computational Models ◽  
Stable State ◽  
Landslide Risk ◽  
Kuibyshev Reservoir ◽  
Stepped Surface ◽  
The Stability ◽  
Landslide Slope ◽  
The Village

High-speed railway "Moscow-Kazan" by the draft crosses the Volga (Kuibyshev reservoir) in Chuvashia region 500 m below the village of New Kushnikovo. The crossing plot is a right-bank landslide slope with a stepped surface. Its height is 80 m; the slope steepness -15-16o. The authors should assess the risk of landslides and recommend anti-landslide measures to ensure the safety of the future bridge. For this landslide factors have been analyzed, slope stability assessment has been performed and recommendations have been suggested. The role of the following factors have been analyzed: 1) hydrologic - erosion and abrasion reservoir and runoff role; 2) lithologyc (the presence of Urzhum and Northern Dvina horizons of plastically deformable rocks, displacement areas); 3) hydrogeological (the role of perched, ground and interstratal water); 4) geomorphological (presence of the elemental composition of sliding systems and their structure in the relief); 5) exogeodynamic (cycles and stages of landslide systems development, mechanisms and relationship between landslide tiers of different generations and blocks contained in tiers). As a result 6-7 computational models at each of the three engineering-geological sections were made. The stability was evaluated by the method “of the leaning slope”. It is proved that the slope is in a very stable state and requires the following measures: 1) unloading (truncation) of active heads blocks of landslide tiers) and the edge of the plateau, 2) regulation of the surface and groundwater flow, 3) concrete dam, if necessary.

INNOVATIVE METHOD OF SATELLITE COMMUNICATION

2019 ◽  
Author(s):  
Teodor Narytnik ◽  
Vladimir Saiko
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Satellite Communication ◽  
Radio Channel ◽  
Satellite Communications ◽  
Service Area ◽  
Satellite Systems ◽  
Orbit Satellite ◽  
Geometric Size ◽  
Distributed Satellite

The technical aspects of the main promising projects in the segments of medium and low-orbit satellite communication systems are considered, as well as the project of the domestic low-orbit information and telecommunications system using the terahertz range, which is based on the use of satellite platforms of the micro- and nanosatellite class and the distribution of functional blocks of complex satellite payloads more high-end on multiple functionally related satellites. The proposed system of low-orbit satellite communications represents the groupings of low-orbit spacecraft (LEO-system) with the architecture of a "distributed satellite", which include the groupings of the root (leading) satellites and satellite repeaters (slaves). Root satellites are interconnected in a ring network by high-speed links between the satellites. The geometric size of the “distributed satellite” is the area around the root satellite with a radius of about 1 km. The combination of beams, which are formed by the repeater satellites, make up the service area of the LEO system. The requirements for the integrated service area of the LEO system (geographical service area) determine the requirements for the number of distributed satellites in the system as a whole. In the proposed system to reduce mutual interference between the grouping of the root (leading) satellites and repeater satellites (slaves) and, accordingly, minimizing distortions of the information signal when implementing inter-satellite communication, this line (radio channel) was created in an unlicensed frequency (e.g., in the terahertz 140 GHz) range. In addition, it additionally allows you to minimize the size of the antennas of such a broadband channel and simplify the operation of these satellite systems.

Design and Implementation of an Efficient Parallel LFSR Architecture for Wireless Communication Systems

2019 ◽  
Vol 14 ◽  
Author(s):  
A. Suresh Babu ◽  
B. Anand
Keyword(s):  
Wireless Communication ◽  
Power Consumption ◽  
Low Power ◽  
Communication Systems ◽  
High Speed ◽  
Design Tool ◽  
Shift Register ◽  
Linear Feedback ◽  
Wireless Communication Systems ◽  
Coverage Area

: A Linear Feedback Shift Register (LFSR) considers a linear function typically an XOR operation of the previous state as an input to the current state. This paper describes in detail the recent Wireless Communication Systems (WCS) and techniques related to LFSR. Cryptographic methods and reconfigurable computing are two different applications used in the proposed shift register with improved speed and decreased power consumption. Comparing with the existing individual applications, the proposed shift register obtained >15 to <=45% of decreased power consumption with 30% of reduced coverage area. Hence this proposed low power high speed LFSR design suits for various low power high speed applications, for example wireless communication. The entire design architecture is simulated and verified in VHDL language. To synthesis a standard cell library of 0.7um CMOS is used. A custom design tool has been developed for measuring the power. From the results, it is obtained that the cryptographic efficiency is improved regarding time and complexity comparing with the existing algorithms. Hence, the proposed LFSR architecture can be used for any wireless applications due to parallel processing, multiple access and cryptographic methods.

Sign in / Sign up

Export Citation Format

Share Document