Half-mode substrate integrated plasmonic waveguide for filter and diplexer designs

2021 ◽  
Author(s):  
Yue Cui ◽  
Kai-Da Xu ◽  
Ying-Jiang Guo ◽  
Qiang Chen
Keyword(s):  
Communication Systems ◽  
Surface Plasmon Polariton ◽  
Simple Structure ◽  
Bandpass Filter ◽  
Cutoff Frequency ◽  
Plasmonic Waveguide ◽  
Wireless Communication Systems ◽  
Integrated Devices ◽  
Measurement Results ◽  
Via Holes

Abstract A half-mode substrate integrated waveguide (HMSIW) combined with spoof surface plasmon polariton (SSPP) structure is proposed to realize bandpass filter (BPF) characteristic and miniaturization, which is termed as the half-mode substrate integrated plasmonic waveguide (HMSIPW). Compared with the conventional HMSIW structure having identical cutoff frequency, this new design of HMSIPW not only supports SSPP modes, but also realizes a transversal size reduction of 19.4% and longitudinal reduction of more than 60%. Then, a diplexer based on two back-to-back placed HMSIPW BPFs is designed, and it has only one row of metallized via holes to further reduce the transversal size. The experimental prototypes of the filters and diplexer have been manufactured, and the measurement results agree well with simulation ones. Due to the size miniaturization and simple structure, the proposed designs will have many potentials in the integrated devices and circuits for wireless communication systems.

scholarly journals Effect of the defected microstrip structure shapes on the performance of dual-band bandpass filter for wireless communications

2021 ◽  
Vol 10 (1) ◽  
pp. 232-240
Author(s):  
Mussa Mabrok ◽  
Zahriladha Zakaria ◽  
Yully Erwanti Masrukin ◽  
Tole Sutikno ◽  
Hussein Alsariera
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Bandpass Filter ◽  
Dual Band ◽  
Center Frequency ◽  
Wireless Communication Systems ◽  
Notch Band ◽  
Quarter Wavelength ◽  
Crucial Component ◽  
Microstrip Structure

Due to the progression growth of multiservice wireless communication systems in a single device, multiband bandpass filter has attract a great attention to the end user. Therefore, multiband bandpass filter is a crucial component in the multiband transceivers systems which can support multiple services in one device. This paper presents a design of dual-band bandpass filter at 2.4 GHz and 3.5 GHz for WLAN and WiMAX applications. Firstly, the wideband bandpass filter is designed at a center frequency of 3 GHz based on quarter-wavelength short circuited stub. Three types of defected microstrip structure (DMS) are implemented to produce a wide notch band, which are T-inversed shape, C-shape, and U- Shape. Based on the performance comparisons, U-shaped DMS is selected to be integrated with the bandpass filter. The designed filter achieved two passbands centered at 2.51 GHz and 3.59 GHz with 3 dB bandwidth of 15.94 % and 15.86 %. The proposed design is very useful for wireless communication systems and its applications such as WLAN and WiMAX 

scholarly journals Pattern Reconfigurable Wideband Stacked Microstrip Patch Antenna for 60 GHz Band

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Alexander Bondarik ◽  
Daniel Sjöberg
Keyword(s):  
Microstrip Antenna ◽  
Communication Systems ◽  
High Speed ◽  
Wireless Communication Systems ◽  
60 Ghz ◽  
Central Frequency ◽  
Shift Method ◽  
Microstrip Patch ◽  
Parasitic Patch ◽  
Measurement Results

A beam shift method is presented for an aperture coupled stacked microstrip antenna with a gridded parasitic patch. The gridded parasitic patch is formed by nine close coupled identical rectangular microstrip patches. Each of these patches is resonant at the antenna central frequency. Using four switches connecting adjacent parasitic patches in the grid, it is possible to realize a pattern reconfigurable antenna with nine different beam directions in broadside, H-plane, E-plane, and diagonal planes. The switches are modeled by metal strips and different locations for strips are studied. As a result an increase in the antenna coverage is achieved. Measurement results for fabricated prototypes correspond very well to simulation results. The antenna is designed for 60 GHz central frequency and can be used in high speed wireless communication systems.

scholarly journals Design of a Narrow Bandwidth Bandpass Filter Using Compact Spiral Resonator with Chirality

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Weiping Li ◽  
Zongxi Tang ◽  
Xin Cao
Keyword(s):  
Communication Systems ◽  
Bandpass Filter ◽  
Simulation Software ◽  
Wireless Communication Systems ◽  
Planar Circuits ◽  
Rejection Level ◽  
Narrow Bandwidth ◽  
Compact Size ◽  
Good Agreement ◽  
Rejection Band

In this article, a compact narrow-bandpass filter with high selectivity and improved rejection level is presented. For miniaturization, a pair of double negative (DNG) cells consisting of quasi-planar chiral resonators are cascaded and electrically loaded to a microstrip transmission line; short ended stubs are introduced to expand upper rejection band. The structure is analyzed using equivalent circuit models and simulated based on EM simulation software. For validation, the proposed filter is fabricated and measured. The measured results are in good agreement with the simulated ones. By comparing to other filters in the references, it is shown that the proposed filter has the advantage of skirt selectivity and compact size, so it can be integrated more conveniently in modern wireless communication systems and microwave planar circuits.

Design of ultra compact dual-band bandpass filter using L-shaped resonator

2017 ◽  
Vol 9 (3) ◽  
pp. 493-497 ◽  
Author(s):  
Yeganeh Pourasad ◽  
Gholamreza Karimi
Keyword(s):  
Communication Systems ◽  
Return Loss ◽  
Bandpass Filter ◽  
Local Area Networks ◽  
Equivalent Circuit Model ◽  
Local Area ◽  
Dual Band ◽  
Wireless Communication Systems ◽  
Operation Mechanism ◽  
Good Agreement

A compact dual-band microstrip bandpass filter (BPF) is presented for application at the frequencies 2.4 and 5.84 GHz. The proposed main resonator consists of two L-shaped resonators. To improve the upper-stopband of the proposed filter, modified U-Shaped resonators are accepted. The operation mechanism of the filter is investigated based on proffered equivalent-circuit model and transformation function. The sketched dual-band BPF attends the insertion loss less than 0.1 and 0.4 dB Also the return loss is 26 and 28 dB at 2.4 and 5.84, respectively. This proffered filter structure is proper for Bluetooth and wireless local area networks and other wireless communication systems. An overall good agreement between measured and simulated results is observed.

scholarly journals Designing a Microstrip coupled line bandpass filter

2013 ◽  
Vol 2 (4) ◽  
pp. 266 ◽  
Author(s):  
Taoufik Ragani ◽  
N. Amar Touhami ◽  
M. Agoutane
Keyword(s):  
Wireless Communication ◽  
Significant Role ◽  
Communication Systems ◽  
Bandpass Filter ◽  
Bandpass Filters ◽  
Center Frequency ◽  
Wireless Communication Systems ◽  
Frequency Range ◽  
Wide Bandwidth ◽  
Coupled Line

Bandpass filters play a significant role in wireless communication systems. Transmitted and received signals have to be filtered at a certain center frequency with a specific bandwidth, in this paper, a coupled-line bandpass Filter at the center frequency 6 GHz with the wide bandwidth of 2 GHz. this type of filter can be used in WLAN and other applications for the frequency range of 5-7 GHz.

New low-cost broadband CPW-fed planar antenna

2014 ◽  
Vol 8 (2) ◽  
pp. 271-276 ◽  
Author(s):  
Rachid Dakir ◽  
Jamal Zbitou ◽  
Ahmed Mouhsen ◽  
Abdelwahed Tribak ◽  
Amediavilla Sanchez ◽  
...  
Keyword(s):  
Communication Systems ◽  
Low Cost ◽  
Coplanar Waveguide ◽  
Microstrip Antennas ◽  
Design System ◽  
Wireless Communication Systems ◽  
Narrow Bandwidth ◽  
Measurement Results ◽  
Rectangular Microstrip Antenna ◽  
Comparison Of The Results

The narrow bandwidth of microstrip antennas is one of the most important features that restrict its wide usage. This paper presents a new coplanar waveguide-fed compact rectangular microstrip antenna with the improvement of the bandwidth using the slot geometry and cutting rectangular periodic edges for the patch radiator. To develop this structure, we have conducted many optimization and investigation using Momentum Software integrated into ADS “Advanced Design System” and comparison of the results with CST Microwave Studio. The comparison between the simulation and measurement results permits to validate the final achieved antenna with an improvement of the bandwidth. This antenna has wide matching input impedance ranging from 1.7 to 3.5 GHz with a return loss less than −10 dB, corresponding to bandwidth 69.7% at 2.6 GHz as a frequency center. The antenna achieved is a low cost, planar, and easy to be fabricated, thus promising for multiple applications in wireless communication systems. Details of the proposed antenna design and both simulated and experimental results are described and discussed.

Sign in / Sign up

Export Citation Format

Share Document