Design of ultra compact dual-band bandpass filter using L-shaped resonator

2017 ◽  
Vol 9 (3) ◽  
pp. 493-497 ◽  
Author(s):  
Yeganeh Pourasad ◽  
Gholamreza Karimi
Keyword(s):  
Communication Systems ◽  
Return Loss ◽  
Bandpass Filter ◽  
Local Area Networks ◽  
Equivalent Circuit Model ◽  
Local Area ◽  
Dual Band ◽  
Wireless Communication Systems ◽  
Operation Mechanism ◽  
Good Agreement

A compact dual-band microstrip bandpass filter (BPF) is presented for application at the frequencies 2.4 and 5.84 GHz. The proposed main resonator consists of two L-shaped resonators. To improve the upper-stopband of the proposed filter, modified U-Shaped resonators are accepted. The operation mechanism of the filter is investigated based on proffered equivalent-circuit model and transformation function. The sketched dual-band BPF attends the insertion loss less than 0.1 and 0.4 dB Also the return loss is 26 and 28 dB at 2.4 and 5.84, respectively. This proffered filter structure is proper for Bluetooth and wireless local area networks and other wireless communication systems. An overall good agreement between measured and simulated results is observed.

scholarly journals Effect of the defected microstrip structure shapes on the performance of dual-band bandpass filter for wireless communications

2021 ◽  
Vol 10 (1) ◽  
pp. 232-240
Author(s):  
Mussa Mabrok ◽  
Zahriladha Zakaria ◽  
Yully Erwanti Masrukin ◽  
Tole Sutikno ◽  
Hussein Alsariera
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Bandpass Filter ◽  
Dual Band ◽  
Center Frequency ◽  
Wireless Communication Systems ◽  
Notch Band ◽  
Quarter Wavelength ◽  
Crucial Component ◽  
Microstrip Structure

Due to the progression growth of multiservice wireless communication systems in a single device, multiband bandpass filter has attract a great attention to the end user. Therefore, multiband bandpass filter is a crucial component in the multiband transceivers systems which can support multiple services in one device. This paper presents a design of dual-band bandpass filter at 2.4 GHz and 3.5 GHz for WLAN and WiMAX applications. Firstly, the wideband bandpass filter is designed at a center frequency of 3 GHz based on quarter-wavelength short circuited stub. Three types of defected microstrip structure (DMS) are implemented to produce a wide notch band, which are T-inversed shape, C-shape, and U- Shape. Based on the performance comparisons, U-shaped DMS is selected to be integrated with the bandpass filter. The designed filter achieved two passbands centered at 2.51 GHz and 3.59 GHz with 3 dB bandwidth of 15.94 % and 15.86 %. The proposed design is very useful for wireless communication systems and its applications such as WLAN and WiMAX 

scholarly journals Pattern Reconfigurable Antenna for VANET, Wi-Fi, and WiMAX Wireless Communication Systems

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Rahmani Faouzi ◽  
Amar Touhami Naima ◽  
BelbachirKchairi Abdelmounaim ◽  
Aknin Noura ◽  
Taher Nihade
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Equivalent Circuit Model ◽  
Coaxial Cable ◽  
Wireless Communication Systems ◽  
Reconfigurable Antenna ◽  
Antenna Characteristic ◽  
Beam Switching ◽  
Theoretical Results ◽  
Good Agreement

This work presents the design and analysis of a beam switching antenna for VANET, Wi-Fi, and WiMAX wireless communication systems. The proposed reconfigurable antenna is powered by a coaxial cable and consists of a circular patch, six fish-shaped radiating elements, and a circular planar ground. The antenna was constructed on a Rogers RT5880 substrate. Its dimensions are as follows: 0.81λ0 × 0.81λ0 × 0.03λ0. It performs six reconfigurable operating states, at the same frequency, by controlling the activation and deactivation of six PIN diodes to change the beam’s direction. A theoretical equivalent circuit model of the antenna is extracted. A progressive analysis of improving the antenna characteristic performances is provided. The bandwidth of the proposed antenna is 9.07% (measured), 9.62% (simulated), and 9.31% (theoretical). The designed antenna has a maximum gain of 9.57 dB for all pattern states and a superior efficiency ratio from 85% to 95% over the operating range (5.54 GHz–6.10 GHz). The proposed reconfigurable antenna is fabricated. Measured, simulated, and theoretical results are given and show good agreement, including reflection coefficient (S11) and radiation patterns.

scholarly journals Design of a Narrow Bandwidth Bandpass Filter Using Compact Spiral Resonator with Chirality

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Weiping Li ◽  
Zongxi Tang ◽  
Xin Cao
Keyword(s):  
Communication Systems ◽  
Bandpass Filter ◽  
Simulation Software ◽  
Wireless Communication Systems ◽  
Planar Circuits ◽  
Rejection Level ◽  
Narrow Bandwidth ◽  
Compact Size ◽  
Good Agreement ◽  
Rejection Band

In this article, a compact narrow-bandpass filter with high selectivity and improved rejection level is presented. For miniaturization, a pair of double negative (DNG) cells consisting of quasi-planar chiral resonators are cascaded and electrically loaded to a microstrip transmission line; short ended stubs are introduced to expand upper rejection band. The structure is analyzed using equivalent circuit models and simulated based on EM simulation software. For validation, the proposed filter is fabricated and measured. The measured results are in good agreement with the simulated ones. By comparing to other filters in the references, it is shown that the proposed filter has the advantage of skirt selectivity and compact size, so it can be integrated more conveniently in modern wireless communication systems and microwave planar circuits.

scholarly journals A Design of a Dual-Band Bandpass Filter Based on Modal Analysis for Modern Communication Systems

Electronics ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1770 ◽  
Author(s):  
Ali Lalbakhsh ◽  
Seyed Morteza Alizadeh ◽  
Amirhossein Ghaderi ◽  
Alireza Golestanifar ◽  
Bahare Mohamadzade ◽  
...  
Keyword(s):  
Communication Systems ◽  
Group Delay ◽  
Bandpass Filter ◽  
Dual Band ◽  
Mode Analysis ◽  
Transmission Zeros ◽  
Coupling Structure ◽  
And Control ◽  
Lumped Circuit Model ◽  
Good Agreement

A dual-band bandpass filter (BPF) composed of a coupling structure and a bent T-shaped resonator loaded by small L-shaped stubs is presented in this paper. The first band of the proposed BPF covers 4.6 to 10.6 GHz, showing 78.9% fractional bandwidth (FBW) at 7.6 GHz, and the second passband is cantered at 11.5 GHz with a FBW of 2.34%. The bent T-shaped resonator generates two transmission zeros (TZs) near the wide passband edges, which are used to tune the bandwidth of the first band, and the L-shaped stubs are used to create and control the narrow passband. The selectivity performance of the BPF is analyzed using the transfer function extracted from the lumped circuit model verified by a detailed even/odd mode analysis. The BPF presents a flat group delay (GD) of 0.45 ns and an insertion loss (IL) less than 0.6 dB in the wide passband and a 0.92 IL in the narrow passband. A prototype of the proposed BPF is fabricated and tested, showing very good agreement between the numerically predicted and measured results.

Dual-band bandpass filter using composite metamaterial resonator

2016 ◽  
Vol 30 (07) ◽  
pp. 1650079 ◽  
Author(s):  
Yu-Ting Jin ◽  
Li-Ming Si ◽  
Qing-Le Zhang ◽  
Yu-Ming Wu ◽  
Xin Lv
Keyword(s):  
Communication Systems ◽  
Bandpass Filter ◽  
Effective Medium Theory ◽  
Dual Band ◽  
Wireless Communication Systems ◽  
Microwave Measurement ◽  
Medium Theory ◽  
Left Handed ◽  
Closed Ring ◽  
X Band

A dual-band bandpass filter at X-band is proposed using composite metamaterial resonator consisting of an outer square closed-ring resonator (SCRR) and two inner electric inductance–capacitance (ELC) resonators. Numerical simulation and microwave measurement reveal that the filter exhibits two passbands centered at 8.76 GHz and 11.04 GHz, with 3 dB bandwidths of 130 MHz and 290 MHz, respectively. The complex dispersion relation of the filter is further derived based on the effective medium theory, where two balanced composite right-/left-handed bands are found, i.e. lines exhibiting two left-handed and two right-handed bands alternating. The proposed filter may find useful in dual-band or multi-band wireless communication systems.

scholarly journals Design and Analysis of Super Wideband Antenna for Microwave Applications

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 477
Author(s):  
Warsha Balani ◽  
Mrinal Sarvagya ◽  
Ajit Samasgikar ◽  
Tanweer Ali ◽  
Pradeep Kumar
Keyword(s):  
Communication Systems ◽  
Equivalent Circuit Model ◽  
Wireless Communication Systems ◽  
Impedance Bandwidth ◽  
Frequency Range ◽  
Fractional Bandwidth ◽  
Wide Bandwidth ◽  
Wireless Applications ◽  
Frequency Constraint ◽  
Time Domain Characterization

In this article, a compact concentric structured monopole patch antenna for super wideband (SWB) application is proposed and investigated. The essential characteristics of the designed antenna are: (i) to attain super-wide bandwidth characteristics, the proposed antenna is emerged from a traditional circular monopole antenna and has obtained an impedance bandwidth of 38.9:1 (ii) another important characteristic of the presented antenna is its larger bandwidth dimension ratio (BDR) value of 6596 that is accomplished by augmenting the electrical length of the patch. The electrical dimension of the proposed antenna is 0.18λ×0.16λ (λ corresponds to the lower end operating frequency). The designed antenna achieves a frequency range from 1.22 to 47.5 GHz with a fractional bandwidth of 190% and exhibiting S11 < −10 dB in simulation. For validating the simulated outcomes, the antenna model is fabricated and measured. Good conformity is established between measured and simulated results. Measured frequency ranges from 1.25 to 40 GHz with a fractional bandwidth of 188%, BDR of 6523 and S11 < −10 dB. Even though the presented antenna operates properly over the frequency range from 1.22 to 47.5 GHz, the results of the experiment are measured till 40 GHz because of the high-frequency constraint of the existing Vector Network Analyzer (VNA). The designed SWB antenna has the benefit of good gain, concise dimension, and wide bandwidth above the formerly reported antenna structures. Simulated gain varies from 0.5 to 10.3 dBi and measured gain varies from 0.2 to 9.7 dBi. Frequency domain, as well as time-domain characterization, has been realized to guide the relevance of the proposed antenna in SWB wireless applications. Furthermore, an equivalent circuit model of the proposed antenna is developed, and the response of the circuit is obtained. The presented antenna can be employed in L, S, C, X, Ka, K, Ku, and Q band wireless communication systems.

Half-mode substrate integrated plasmonic waveguide for filter and diplexer designs

2021 ◽  
Author(s):  
Yue Cui ◽  
Kai-Da Xu ◽  
Ying-Jiang Guo ◽  
Qiang Chen
Keyword(s):  
Communication Systems ◽  
Surface Plasmon Polariton ◽  
Simple Structure ◽  
Bandpass Filter ◽  
Cutoff Frequency ◽  
Plasmonic Waveguide ◽  
Wireless Communication Systems ◽  
Integrated Devices ◽  
Measurement Results ◽  
Via Holes

Abstract A half-mode substrate integrated waveguide (HMSIW) combined with spoof surface plasmon polariton (SSPP) structure is proposed to realize bandpass filter (BPF) characteristic and miniaturization, which is termed as the half-mode substrate integrated plasmonic waveguide (HMSIPW). Compared with the conventional HMSIW structure having identical cutoff frequency, this new design of HMSIPW not only supports SSPP modes, but also realizes a transversal size reduction of 19.4% and longitudinal reduction of more than 60%. Then, a diplexer based on two back-to-back placed HMSIPW BPFs is designed, and it has only one row of metallized via holes to further reduce the transversal size. The experimental prototypes of the filters and diplexer have been manufactured, and the measurement results agree well with simulation ones. Due to the size miniaturization and simple structure, the proposed designs will have many potentials in the integrated devices and circuits for wireless communication systems.

scholarly journals Spherical Dielectric Resonator Antenna for 5G Application

2021 ◽  
Author(s):  
Ashok kumar ◽  
Rajveer Singh Yaduvanshi
Keyword(s):  
Wireless Networks ◽  
Wireless Communication ◽  
Theoretical Analysis ◽  
Dielectric Resonator ◽  
Communication Systems ◽  
Return Loss ◽  
Wireless Communication Systems ◽  
Dielectric Resonator Antenna ◽  
Good Match ◽  
Good For

Abstract In this article Spherical DRA has been formulated , simulated and proto type developed. The detailed theoretical analysis along with simulations and measured results at 5.8 GHz have been presented in this article. The SDRA at 5.8 GHz covering 5G frewuenci band. The proposed design antenna provides the gain of 7.3 dB and return loss -25 dB. The measured results are in good match with simulated result. The proposed SDRA are good for 5G wireless networks, as well as other sub-6 band in wireless communication systems.

scholarly journals Omnidirectional Microstrip Patch Antenna for 2.4 GHz Wireless Communications

2021 ◽  
Vol 2114 (1) ◽  
pp. 012051
Author(s):  
Alaa M. Abdulhussein ◽  
Ali H. Khidhi ◽  
Ahmed A. Naser
Keyword(s):  
Computer Simulation ◽  
Wireless Communications ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Communication Systems ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Wireless Communication Systems ◽  
Microstrip Patch ◽  
Operating Bandwidth

Abstract Antenna studies on various wireless communication systems have been carried out by many academics. In this research, the omnidirectional microstrip patch antenna (MPA) is proposed, manufactured, and tested. The operating bandwidth of the antenna is quite suitable for the different applications. The proposed antenna fabricated on the flame retardant (FR-4) substrate with a volume of 75.85 × 57.23 × 1.59 mm3. Computer simulation technology (CST) studio used to design and simulate. Experimental results show that the return loss (RL), bandwidth (BW), voltage standing wave ratio (VSWR) and input impedance (Zin ) are -25.26 dB, 61 MHz, 1.12 and 54.46 Ω, respectively. The antenna operates at 2.42 GHz (from 2.39 to 2.45 GHz), which has good performance in the Wi-Fi, Bluetooth, and ZigBee communications.

Sign in / Sign up

Export Citation Format

Share Document