scholarly journals Design of a Narrow Bandwidth Bandpass Filter Using Compact Spiral Resonator with Chirality

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Weiping Li ◽  
Zongxi Tang ◽  
Xin Cao
Keyword(s):  
Communication Systems ◽  
Bandpass Filter ◽  
Simulation Software ◽  
Wireless Communication Systems ◽  
Planar Circuits ◽  
Rejection Level ◽  
Narrow Bandwidth ◽  
Compact Size ◽  
Good Agreement ◽  
Rejection Band

In this article, a compact narrow-bandpass filter with high selectivity and improved rejection level is presented. For miniaturization, a pair of double negative (DNG) cells consisting of quasi-planar chiral resonators are cascaded and electrically loaded to a microstrip transmission line; short ended stubs are introduced to expand upper rejection band. The structure is analyzed using equivalent circuit models and simulated based on EM simulation software. For validation, the proposed filter is fabricated and measured. The measured results are in good agreement with the simulated ones. By comparing to other filters in the references, it is shown that the proposed filter has the advantage of skirt selectivity and compact size, so it can be integrated more conveniently in modern wireless communication systems and microwave planar circuits.

Design of ultra compact dual-band bandpass filter using L-shaped resonator

2017 ◽  
Vol 9 (3) ◽  
pp. 493-497 ◽  
Author(s):  
Yeganeh Pourasad ◽  
Gholamreza Karimi
Keyword(s):  
Communication Systems ◽  
Return Loss ◽  
Bandpass Filter ◽  
Local Area Networks ◽  
Equivalent Circuit Model ◽  
Local Area ◽  
Dual Band ◽  
Wireless Communication Systems ◽  
Operation Mechanism ◽  
Good Agreement

A compact dual-band microstrip bandpass filter (BPF) is presented for application at the frequencies 2.4 and 5.84 GHz. The proposed main resonator consists of two L-shaped resonators. To improve the upper-stopband of the proposed filter, modified U-Shaped resonators are accepted. The operation mechanism of the filter is investigated based on proffered equivalent-circuit model and transformation function. The sketched dual-band BPF attends the insertion loss less than 0.1 and 0.4 dB Also the return loss is 26 and 28 dB at 2.4 and 5.84, respectively. This proffered filter structure is proper for Bluetooth and wireless local area networks and other wireless communication systems. An overall good agreement between measured and simulated results is observed.

scholarly journals Design and Simulation of Microstrip Multiband Antenna for Wireless Applications

2020 ◽  
pp. 344-347
Keyword(s):  
Patch Antenna ◽  
Communication Systems ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Dual Band ◽  
Wireless Communication Systems ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
X Band ◽  
Compact Size

This paper proposes a compact sized dual band microstrip patch antenna with microstrip feed line. The patch of antenna is a rectangular shaped patch which has a circular slot in the patch for multiband operations. This antenna covers frequency bands, centered at 2.4GHz, 3.3GHz, which is useful for the C-band and X-band operations. In this paper, a microstrip patch antenna with compact size of 21x17x1.6 mm in rectangular shape. This antenna is designed on FR4 substrate (Dielectric constant=4.4) of thickness h=1.6mm with ground of size 25x10 mm. The proposed structure were simulated on CADFEKO simulation software. This proposed antenna is suitable for multiband wireless communication systems and mobile equipments.

scholarly journals A 300-GHz low-cost high-gain fully metallic Fabry–Perot cavity antenna for 6G terahertz wireless communications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Basem Aqlan ◽  
Mohamed Himdi ◽  
Hamsakutty Vettikalladi ◽  
Laurent Le-Coq
Keyword(s):  
Communication Systems ◽  
Low Cost ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Wireless Communication Systems ◽  
Beam Radiation ◽  
Compact Size ◽  
Fabry Perot ◽  
Operating Bandwidth ◽  
Polarization Level

AbstractA low-cost, compact, and high gain Fabry–Perot cavity (FPC) antenna which operates at 300 GHz is presented. The antenna is fabricated using laser-cutting brass technology. The proposed antenna consists of seven metallic layers; a ground layer, an integrated stepped horn element (three-layers), a coupling layer, a cavity layer, and an aperture-frequency selective surface (FSS) layer. The proposed aperture-FSS function acts as a partially reflective surface, contributing to a directive beam radiation. For verification, the proposed sub-terahertz (THz) FPC antenna prototype was developed, fabricated, and measured. The proposed antenna has a measured reflection coefficient below − 10 dB from 282 to 304 GHz with a bandwidth of 22 GHz. The maximum measured gain observed is 17.7 dBi at 289 GHz, and the gain is higher than 14.4 dBi from 285 to 310 GHz. The measured radiation pattern shows a highly directive pattern with a cross-polarization level below − 25 dB over the whole band in all cut planes, which confirms with the simulation results. The proposed antenna has a compact size, low fabrication cost, high gain, and wide operating bandwidth. The total height of the antenna is 1.24 $${\lambda }_{0}$$ λ 0 ($${\lambda }_{0}$$ λ 0 at the design frequency, 300 GHz) , with a size of 2.6 mm × 2.6 mm. The proposed sub-THz waveguide-fed FPC antenna is suitable for 6G wireless communication systems.

Compact dual-mode microstrip bandpass filter based on slotted square patch resonator

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Karthie S. ◽  
Zuvairiya Parveen J. ◽  
Yogeshwari D. ◽  
Venkadeshwari E.
Keyword(s):  
Bandpass Filter ◽  
Filter Design ◽  
Center Frequency ◽  
Dual Mode ◽  
Content Type ◽  
Transmission Zeros ◽  
Compact Size ◽  
Mode Response ◽  
Better Than ◽  
Good Agreement

Purpose The purpose of this paper is to present the design of a compact microstrip bandpass filter (BPF) in dual-mode configuration loaded with cross-loop and square ring slots on a square patch resonator for C-band applications. Design/methodology/approach In the proposed design, the dual-mode response for the filter is realized with two transmission zeros (TZs) by the insertion of a perturbation element at the diagonal corner of the square patch resonator with orthogonal feed lines. Such TZs at the edges of the passband result in better selectivity for the proposed BPF. Moreover, the cross-loop and square ring slots are etched on a square patch resonator to obtain a miniaturized BPF. Findings The proposed dual-mode microstrip filter fabricated in RT/duroid 6010 substrate using PCB technology has a measured minimum insertion loss of 1.8 dB and return loss better than 24.5 dB with a fractional bandwidth (FBW) of 6.9%. A compact size of 7.35 × 7.35 mm2 is achieved for the slotted patch resonator-based dual-mode BPF at the center frequency of 4.76 GHz. As compared with the conventional square patch resonator, a size reduction of 61% is achieved with the proposed slotted design. The feasibility of the filter design is confirmed by the good agreement between the measured and simulated responses. The performance of the proposed filter structure is compared with other dual-mode filter works. Originality/value In the proposed work, a compact dual-mode BPF is reported with slotted structures. The conventional square patch resonator is deployed with cross-loop and square ring slots to design a dual-mode filter with a square perturbation element at its diagonal corner. The proposed filter exhibits compact size and favorable performance compared to other dual-mode filter works reported in literature. The aforementioned design of the dual-mode BPF at 4.76 GHz is suitable for applications in the lower part of the C-band.

Half-mode substrate integrated plasmonic waveguide for filter and diplexer designs

2021 ◽  
Author(s):  
Yue Cui ◽  
Kai-Da Xu ◽  
Ying-Jiang Guo ◽  
Qiang Chen
Keyword(s):  
Communication Systems ◽  
Surface Plasmon Polariton ◽  
Simple Structure ◽  
Bandpass Filter ◽  
Cutoff Frequency ◽  
Plasmonic Waveguide ◽  
Wireless Communication Systems ◽  
Integrated Devices ◽  
Measurement Results ◽  
Via Holes

Abstract A half-mode substrate integrated waveguide (HMSIW) combined with spoof surface plasmon polariton (SSPP) structure is proposed to realize bandpass filter (BPF) characteristic and miniaturization, which is termed as the half-mode substrate integrated plasmonic waveguide (HMSIPW). Compared with the conventional HMSIW structure having identical cutoff frequency, this new design of HMSIPW not only supports SSPP modes, but also realizes a transversal size reduction of 19.4% and longitudinal reduction of more than 60%. Then, a diplexer based on two back-to-back placed HMSIPW BPFs is designed, and it has only one row of metallized via holes to further reduce the transversal size. The experimental prototypes of the filters and diplexer have been manufactured, and the measurement results agree well with simulation ones. Due to the size miniaturization and simple structure, the proposed designs will have many potentials in the integrated devices and circuits for wireless communication systems.

scholarly journals Effect of the defected microstrip structure shapes on the performance of dual-band bandpass filter for wireless communications

2021 ◽  
Vol 10 (1) ◽  
pp. 232-240
Author(s):  
Mussa Mabrok ◽  
Zahriladha Zakaria ◽  
Yully Erwanti Masrukin ◽  
Tole Sutikno ◽  
Hussein Alsariera
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Bandpass Filter ◽  
Dual Band ◽  
Center Frequency ◽  
Wireless Communication Systems ◽  
Notch Band ◽  
Quarter Wavelength ◽  
Crucial Component ◽  
Microstrip Structure

Due to the progression growth of multiservice wireless communication systems in a single device, multiband bandpass filter has attract a great attention to the end user. Therefore, multiband bandpass filter is a crucial component in the multiband transceivers systems which can support multiple services in one device. This paper presents a design of dual-band bandpass filter at 2.4 GHz and 3.5 GHz for WLAN and WiMAX applications. Firstly, the wideband bandpass filter is designed at a center frequency of 3 GHz based on quarter-wavelength short circuited stub. Three types of defected microstrip structure (DMS) are implemented to produce a wide notch band, which are T-inversed shape, C-shape, and U- Shape. Based on the performance comparisons, U-shaped DMS is selected to be integrated with the bandpass filter. The designed filter achieved two passbands centered at 2.51 GHz and 3.59 GHz with 3 dB bandwidth of 15.94 % and 15.86 %. The proposed design is very useful for wireless communication systems and its applications such as WLAN and WiMAX 

scholarly journals Pattern Reconfigurable Antenna for VANET, Wi-Fi, and WiMAX Wireless Communication Systems

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Rahmani Faouzi ◽  
Amar Touhami Naima ◽  
BelbachirKchairi Abdelmounaim ◽  
Aknin Noura ◽  
Taher Nihade
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Equivalent Circuit Model ◽  
Coaxial Cable ◽  
Wireless Communication Systems ◽  
Reconfigurable Antenna ◽  
Antenna Characteristic ◽  
Beam Switching ◽  
Theoretical Results ◽  
Good Agreement

This work presents the design and analysis of a beam switching antenna for VANET, Wi-Fi, and WiMAX wireless communication systems. The proposed reconfigurable antenna is powered by a coaxial cable and consists of a circular patch, six fish-shaped radiating elements, and a circular planar ground. The antenna was constructed on a Rogers RT5880 substrate. Its dimensions are as follows: 0.81λ0 × 0.81λ0 × 0.03λ0. It performs six reconfigurable operating states, at the same frequency, by controlling the activation and deactivation of six PIN diodes to change the beam’s direction. A theoretical equivalent circuit model of the antenna is extracted. A progressive analysis of improving the antenna characteristic performances is provided. The bandwidth of the proposed antenna is 9.07% (measured), 9.62% (simulated), and 9.31% (theoretical). The designed antenna has a maximum gain of 9.57 dB for all pattern states and a superior efficiency ratio from 85% to 95% over the operating range (5.54 GHz–6.10 GHz). The proposed reconfigurable antenna is fabricated. Measured, simulated, and theoretical results are given and show good agreement, including reflection coefficient (S11) and radiation patterns.

scholarly journals A six-channel microstrip diplexer for multi-service wireless communication systems

2020 ◽  
Vol 41 (3) ◽  
Author(s):  
Farhad Fouladi ◽  
Abbas Rezaei
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
The Other ◽  
Wireless Communication Systems ◽  
Frequency Division ◽  
Compact Size ◽  
Coupled Lines ◽  
Simulation Results ◽  
Insertion Losses

In this paper, a six-channel microstrip diplexer is designed and fabricated. It operates at 0.75/0.85/1/1.25/1.6/1.8 GHz for multi-service wireless communication systems. It consists of two stub-loaded resonators, which are integrated by coupled lines. The channels are close together, which makes the proposed diplexer suitable for frequency division duplex (FDD) schemes. The proposed structure has a compact size of 0.025 λg2 where λg is the guided wavelength calculated at 0.75 GHz. The other advantages of the introduced multi-channel diplexer are the low insertion losses of 1.62/1.27/0.43/0.53/1.26 and 1 dB, as well as good return losses of 26/26/25/25/21.7 and 22 dB at 0.75/0.85/1/1.25/1.6/1.8 GHz respectively. A good isolation of less than 22 dB is obtained between the channels. In order to design the presented diplexer a designing technique is used which is based on the proposing of an equivalent approximated LC model and calculating the inductors and capacitors. To confirm the simulation results, the introduced diplexer is fabricated and measured.

Miniaturized Bandpass Filter with Wide Stopband using Spiral Configuration of Stepped Impedance Resonator

Frequenz ◽  
2018 ◽  
Vol 72 (9-10) ◽  
pp. 455-458 ◽  
Author(s):  
Vivek Singh ◽  
Vinay Kumar Killamsetty ◽  
Biswajeet Mukherjee
Keyword(s):  
Bandpass Filter ◽  
Short Circuit ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Transmission Zeros ◽  
Quarter Wavelength ◽  
Rejection Level ◽  
Compact Size ◽  
Band Pass ◽  
Stepped Impedance Resonator

Abstract In this letter, a miniaturized Band Pass Filter (BPF) with wide stopband centered at 0.350 GHz for TETRA band applications is proposed using a Spiral Short Circuit quarter wavelength Stepped Impedance Resonator (SSC-SIR) and a stub loaded on feed line for enhancement of rejection level in the stopband. Spiral configuration of the resonator is used for the miniaturization of BPF. The proposed BPF provides a 3dB fractional bandwidth of 13.7 % with two transmission zeros in the lower and upper stopband to provide good selectivity and four transmission zeros which provide wide stopband upto 6.86f0. Proposed BPF has a very compact size of 0.064λg×0.062λg.

scholarly journals A Compact Wideband SIW Bandpass Filter with Wide Stopband and High Selectivity

Electronics ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 440 ◽  
Author(s):  
Huang ◽  
Yuan
Keyword(s):  
High Selectivity ◽  
Bandpass Filter ◽  
Cutoff Frequency ◽  
Ring Resonators ◽  
Fractional Bandwidth ◽  
Split Ring ◽  
Electromagnetic Band Gap ◽  
Compact Size ◽  
Novel Method ◽  
Good Agreement

A novel method to design a wideband substrate integrated waveguide (SIW) bandpass filter (BPF) with compact size, wide stopband and high selectivity is presented. In this method some unique electromagnetic band-gap (EBG) cells are periodically etched on the top layer of SIW to realize a wide passband propagating below the equivalent waveguide cutoff frequency. By changing the configuration of EBG cells, undesired harmonics in upper stopband can be suppressed and a wideband BPF with wide stopband can be obtained. By symmetrically loading two complementary split ring resonators (CSRRs) on the tapered gradient lines of the input/output ports, a transmission zero near the passband can be introduced, and it makes the frequency selectivity of upper sideband improve significantly. As a verification, a wideband SIW BPF with a 3.02 GHz absolute bandwidth (ABW) and a 64.7% fractional bandwidth (FBW) centered at 4.67 GHz is designed, simulated, manufactured, and measured. The results of the experiment and simulation are in good agreement.

Sign in / Sign up

Export Citation Format

Share Document