scholarly journals The problem of identification an unknown substance by the radiographic method

2021 ◽  
Vol 2099 (1) ◽  
pp. 012043
Author(s):  
V G Nazarov
Keyword(s):  
Chemical Composition ◽  
Chemical Elements ◽  
Sufficient Conditions ◽  
Identification Problem ◽  
Photon Flux ◽  
Algebraic Equations ◽  
Tabular Data ◽  
Unknown Substance ◽  
Value Decomposition ◽  
Series Systems

Abstract This paper considers the problem of partial identification of the chemical composition of an unknown medium by the multiple X-ray of this medium. A sample of an unknown substance is assumed to be homogeneous in its chemical composition, and the photon flux, collimated both in direction and in energy. A mathematical model for the identification problem is formulated. The approach proposed to solving the problem is based on the method of singular value decomposition of a matrix. At the first stage of the solution the problem is reduced to finding singular numbers and singular vectors for the series systems of algebraic equations linear with respect to products of unknown quantities. Then, based on the data obtained, a special function is built, called an indicator to the distinguishability of substances, which enables the sufficient conditions for the distinguishability of various substances. Based on the tabular data, calculations were made for a number of specific groups of chemical elements.

scholarly journals Chemical Composition of the RS CNn-Type Star 33 Piscium

2011 ◽  
Vol 20 (1) ◽  
Author(s):  
G. Barisevišius ◽  
G. Tautvaišienė ◽  
S. Berdyugina ◽  
Y. Chorniy ◽  
I. Ilyin
Keyword(s):  
Chemical Composition ◽  
Chemical Elements ◽  
Type Star

AbstractAbundances of 22 chemical elements, including the key elements and isotopes such as

scholarly journals Seasonal variations in PM10 inorganic composition in the Andean city

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Rasa Zalakeviciute ◽  
Katiuska Alexandrino ◽  
Yves Rybarczyk ◽  
Alexis Debut ◽  
Karla Vizuete ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Inductively Coupled Plasma ◽  
Chemical Elements ◽  
Large Fraction ◽  
Urban Pollution ◽  
Optical Emission ◽  
High Elevation ◽  
Water Soluble ◽  
Wet Season ◽  
Soluble Ions

Abstract Particulate matter (PM) is one of the key pollutants causing health risks worldwide. While the preoccupation for increased concentrations of these particles mainly depends on their sources and thus chemical composition, some regions are yet not well investigated. In this work the composition of chemical elements of atmospheric PM10 (particles with aerodynamic diameters ≤ 10 µm), collected at the urban and suburban sites in high elevation tropical city, were chemically analysed during the dry and wet seasons of 2017–2018. A large fraction (~ 68%) of PM10 composition in Quito, Ecuador is accounted for by water-soluble ions and 16 elements analysed using UV/VIS spectrophotometer and Inductively Coupled Plasma—Optical Emission Spectroscopy (ICP-OES). Hierarchical clustering analysis was performed to study a correlation between the chemical composition of urban pollution and meteorological parameters. The suburban area displays an increase in PM10 concentrations and natural elemental markers during the dry (increased wind intensity, resuspension of soil dust) season. Meanwhile, densely urbanized area shows increased total PM10 concentrations and anthropogenic elemental markers during the wet season, which may point to the worsened combustion and traffic conditions. This might indicate the prevalence of cardiovascular and respiratory problems in motorized areas of the cities in the developing world.

scholarly journals Soil and Leaf Nutrients Drivers on the Chemical Composition of the Essential Oil of Siparuna muricata (Ruiz & Pav.) A. DC. from Ecuador

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2949
Author(s):  
Juan I. Burneo ◽  
Ángel Benítez ◽  
James Calva ◽  
Pablo Velastegui ◽  
Vladimir Morocho
Keyword(s):  
Gas Chromatography ◽  
Chemical Composition ◽  
Secondary Metabolites ◽  
Essential Oil ◽  
Chemical Elements ◽  
Climatic Conditions ◽  
Gas Chromatography Mass Spectrometry ◽  
Chemical Compositions ◽  
Leaf Nutrients ◽  
First Time

Chemical compositions of plants are affected by the initial nutrient contents in the soil and climatic conditions; thus, we analyzed for the first time the effects of soil and leaf nutrients on the compositions of the essential oils (EOs) of Siparuna muricata in four different localities in Ecuador. EOs were obtained by hydrodistillation and analyzed by gas chromatography/mass spectrometry (GC/MS) and a gas chromatography/flame ionization detector (GC/FID). Enantiomeric distribution by GC/MS was determined, modifying the enantiomeric separation of β-pinene, limonene, δ-elemene, β-bourbonene, cis-cadina-1 (6), 4-diene and atractylone. A total of 44 compounds were identified. The most representative for L1 were guaiol, atractylone and 4-diene; for L2, cis-cadina-1(6),4-diene and myrcene; for L3, atractylone, myrcene and germacrene B; and finally, L4 germacrene B, myrcene and cis-cadina-1(6),4-diene. Correlations between soil- leaf chemical elements such as Al, Ca, Fe, Mg, Mn, N and Si in the different localities were significant with chemical composition of the essential oil of Siparuna muricata; however, correlations between soil and leaf K, P, and Na were not significant. Cluster and NMDS analysis showed high dissimilarity values of secondary metabolites between four localities related with changes in soil- leaf nutrients. Thus, the SIMPER routine revealed that not all secondary metabolites contribute equally to establishing the differences in the four localities, and the largest contributions are due to differences in guaiol, cis-cadina-1(6),4-diene, atractylone and germacrene. Our investigation showed for the first time the influences of altitude and soil- leaf chemical elements in the chemical composition of the EOs of S. muricata.

Effect of 3D printer enabled surface morphology and composition on coral growth in artificial reefs

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ilse Valenzuela Matus ◽  
Jorge Lino Alves ◽  
Joaquim Góis ◽  
Augusto Barata da Rocha ◽  
Rui Neto ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Chemical Composition ◽  
Chemical Elements ◽  
Three Dimensional ◽  
Coral Growth ◽  
Coralline Algae ◽  
Textured Surface ◽  
Crustose Coralline Algae ◽  
Statistical Parameters ◽  
Content Type

Purpose The purpose of this paper is to prove and qualify the influence of textured surface substrates morphology and chemical composition on the growth and propagation of transplanted corals. Use additive manufacturing and silicone moulds for converting three-dimensional samples into limestone mortar with white Portland cement substrates for coral growth. Design/methodology/approach Tiles samples were designed and printed with different geometries and textures inspired by nature marine environment. Commercial coral frag tiles were analysed through scanning electron microscopy (SEM) to identify the main chemical elements. Raw materials and coral species were selected. New base substrates were manufactured and deployed into a closed-circuit aquarium to monitor the coral weekly evolution process and analyse the results obtained. Findings Experimental results provided positive statistical parameters for future implementation tests, concluding that the intensity of textured surface, interfered favourably in the coralline algae biofilm growth. The chemical composition and design of the substrates were determinant factors for successful coral propagation. Recesses and cavities mimic the natural rocks aspect and promoted the presence and interaction of other species that favour the richness of the ecosystem. Originality/value Additive manufacturing provided an innovative method of production for ecology restoration areas, allowing rapid prototyping of substrates with high complexity morphologies, a critical and fundamental attribute to guarantee coral growth and Crustose Coralline Algae. The result of this study showed the feasibility of this approach using three-dimensional printing technologies.

Transfer of Abrasive Material at Grinding a Titanium Alloy with a Wheel of Cubic Boron Nitride

2021 ◽  
Vol 316 ◽  
pp. 521-526
Author(s):  
Vladimir A. Nosenko ◽  
Alexander V. Fetisov ◽  
Semen P. Kuznetsov
Keyword(s):  
Titanium Alloy ◽  
Chemical Composition ◽  
Boron Nitride ◽  
Chemical Elements ◽  
Cubic Boron Nitride ◽  
Water Soluble ◽  
Alloy Surface ◽  
Ceramic Bond ◽  
Abrasive Tools ◽  
Wear Products

The article summarizes the results of the of the titanium alloy surface morphology and chemical composition study after grinding with a wheel of cubic boron nitride on a ceramic bond. The titanium alloy was treated using the method of cut-in grinding in the finishing mode using a synthetic water-soluble lubricant-cooling liquid that does not contain mineral oil. The research was carried out using the FEI Versa 3D LoVac electron microscope. Digital photos of the titanium alloy surface at different magnifications are given. Individual objects’ morphology allows us to identify them as wear products of abrasive tools. The chemical composition of the selected objects was studied by local x-ray spectral analysis. CBN crystals are partially or completely pressed into the treated surface and covered with a layer of the treated material. On the surface of CBN crystals, there are chemical elements that are part of the abrasive tool bond.

Optimal allocation of a coherent system with statistical dependent subsystems

2021 ◽  
pp. 1-20
Author(s):  
Bin Lu ◽  
Jiandong Zhang ◽  
Rongfang Yan
Keyword(s):  
Hazard Rate ◽  
Optimal Allocation ◽  
Stochastic Order ◽  
Sufficient Conditions ◽  
Parallel Systems ◽  
Coherent System ◽  
Allocation Policy ◽  
Usual Stochastic Order ◽  
Series Systems ◽  
Parallel Series

Abstract This paper studies the optimal allocation policy of a coherent system with independent heterogeneous components and dependent subsystems, the systems are assumed to consist of two groups of components whose lifetimes follow proportional hazard (PH) or proportional reversed hazard (PRH) models. We investigate the optimal allocation strategy by finding out the number $k$ of components coming from Group A in the up-series system. First, some sufficient conditions are provided in the sense of the usual stochastic order to compare the lifetimes of two-parallel–series systems with dependent subsystems, and we obtain the hazard rate and reversed hazard rate orders when two subsystems have independent lifetimes. Second, similar results are also obtained for two-series–parallel systems under certain conditions. Finally, we generalize the corresponding results to parallel–series and series–parallel systems with multiple subsystems in the viewpoint of the minimal path and the minimal cut sets, respectively. Some numerical examples are presented to illustrate the theoretical findings.

About the possibility of identification of articles from steels, aluminum, copper and alloys on their basis on the expanded micro-impurity elemental composition

2021 ◽  
pp. 51-56
Author(s):  
Yu. B. Sazonov ◽  
D. Yu. Ozherelkov ◽  
R. Sh. Latypov ◽  
E. E. Gorshkov
Keyword(s):  
Spectral Analysis ◽  
Chemical Composition ◽  
Elemental Composition ◽  
Chemical Elements ◽  
Copper Alloys ◽  
Minimal Amount ◽  
Elementary Composition ◽  
Geometric Size ◽  
The Common

Possibility of determination of the fragments and articles made of different grades of steel aluminium and copper alloys and their affiliation to the common melt was examined via the methods of photoelectric spectral analysis based on composition of micro-impurities. Chemical elements with micro-impurities were revealed; they allow to determine affiliation of metal fragments to one melt. Ultimately possible deviations of micro-impurities within one melt were obtained. The technique allowing to establish affiliation of fragments to the common melt based on their elementary composition of micro-impurities with minimal amount of measurements was suggested based on the obtained results. The minimal geometric size of a sample available for analysis was determined; it allows to classify the examined fragments to one melt based on the results of investigation of expanded elementary composition of micro-impurities. Practical opportunities of this technique were displayed on the example of the alloys with different chemical composition.

scholarly journals Kaolinite Claystone-Based Geopolymer Materials: Effect of Chemical Composition and Curing Conditions

Minerals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 444 ◽  
Author(s):  
Pavlína Hájková
Keyword(s):  
Chemical Composition ◽  
Water Glass ◽  
Chemical Elements ◽  
Solidification Process ◽  
Ease Of Use ◽  
Raw Material ◽  
Curing Conditions ◽  
Low Viscosity ◽  
Lower Porosity ◽  
Curing Methods

This work describes the role of chemical composition and curing conditions in geopolymer strength, leachability of chemical elements and porosity. The study focuses on geopolymer material prepared from calcined kaolinite claystone, which is not studied frequently as a raw material for geopolymer production, although it has a high application potential as it is easily commercially available and allows preparation of geopolymers with low viscosity. The composition of geopolymers and their curing methods were selected considering their ease of use in the praxis. Therefore, the potassium water glass itself was used as alkali activator without any KOH or NaOH addition. Chemical composition was changed only by the density of water glass in the range of 1.2 to 1.6 g·cm−3. Geopolymers were cured at a temperature within the range of 5 °C–70 °C to speed up the solidification process as well as by microwave radiation. High compressive strengths were obtained for geopolymers with the highest densities of the water glass (1.5 and 1.6 g·cm−3) in dependence on various curing conditions. Higher strengths were achieved in the case of samples where the solidification was not accelerated. The samples cured at lower temperatures (5 °C) showed lower porosity compared to the other curing types. The lowest leachability of Si and alkalis was reached for the samples with water glass density 1.5 g·cm−3.

scholarly journals ECOGEOCHEMICAL DIAGNOSTICS CONDITION OF URBAN ENVIRONMENT ON POLLUTION SNOW COVER OF VORONEZH CITY

2015 ◽  
Vol 4 (4) ◽  
pp. 121-126
Author(s):  
Tatiana Ivanovna Prozhorina ◽  
Semyon Aleksandrovitch Kurolap ◽  
Nadezhda Ivanovna Yakunina
Keyword(s):  
Comparative Analysis ◽  
Chemical Composition ◽  
Snow Cover ◽  
Urban Environment ◽  
Chemical Elements ◽  
Rapid Assessment ◽  
High Sorption ◽  
Express Methods ◽  
Functional Areas ◽  
The City

Currently, the most popular are the express methods of quality control of the environment, which permit a relatively rapid assessment of ecological and geochemical situation. one such method is based on the use snow cover. snow has a high sorption capacity and is informative in identifying the object of man-made pollution of the urban environment. the paper presents the results of a study of the chemical composition of snow that had fallen in Voronezh during winter 2015. snow samples were taken in the period prior to snowmelt in various functional areas of the city. in order to identify the degree of technogenic impact on the various parts of the city of Voronezh, was made a comparative analysis of the results:аccording to the actual presence of pollutants in precipitation for the study of functional areas;сalculate the rate on the concentration of chemical elements for test samples of snow.according to the degree of mineralization and dust content in snow can be seen technogenic pressure on environment.therefore, a comparative analysis of the degree of contamination of snow in the various functional areas of the city were carried out for the two indicators of the chemical composition - the total mineralization and suspended particles(dust).the results of the analysis of the chemical composition of the melt water indicate an increased level of technogenic pollution of snow cover in all investigated functional areas of Voronezh.

scholarly journals FEATURES OF DENTINE CHEMICAL COMPOSITION OF INTACT TEETH AND TEETH WITH WEDGE-SHAPED DEFECTS

2021 ◽  
Vol 74 (8) ◽  
pp. 1869-1875
Author(s):  
Svitlana P. Yarova ◽  
Iryna I. Zabolotna ◽  
Olena S. Genzytska ◽  
Andrii A. Komlev
Keyword(s):  
Chemical Composition ◽  
Chemical Elements ◽  
Cervical Region ◽  
Cervical Lesions ◽  
X Ray ◽  
Sodium Magnesium ◽  
Calcium Phosphorus ◽  
Cervical Area ◽  
Focused Beam

The aim: Is to define dentine chemical composition of intact teeth and those with wedge-shaped defects followed by the analysis of revealed differences. Materials and methods: Longitudinal sections of 22 clinically removed teeth (12 – clinically intact ones, 10 – with wedge-shaped defects) from both jaws were studied in patients aged between 25-54 years. JSM-6490 LV focused beam electron microscope (scanning) with system of energy-dispersive X-ray microanalysis INCA Penta FETх3 was used. The chemical composition of 148 dentine areas in the incisal region (tubercle), equator, cervical area has been determined as a percentage of the weight amounts of carbon, oxygen, calcium, phosphorus, sodium, magnesium, sulfur, chlorine, zinc, potassium, aluminum. Results: Dentine chemical composition of teeth with wedge-shaped defects differed from those of intact teeth by significantly lower content: sodium, chlorine and calcium – in the incisal region (tubercle); sodium, magnesium − at the equator; sodium, chlorine and calcium – in the cervical region (p≤0.05). In the sample groups with cervical pathology there was more sulfur and oxygen in the incisal region (tubercle), phosphorus and zinc – at the equator, carbon and potassium – in the cervical region (p≤0.05). Conclusions: Differences in the chemical composition of intact teeth and teeth with wedge-shaped defects, the presence of correlation between the studied chemical elements confirm the role of macro- and microelements in the pathogenesis of non-carious cervical lesions.

Sign in / Sign up

Export Citation Format

Share Document