scholarly journals Textural properties of extruded snack products formulated with deboned poultry meat and brewer’s spent grain

2021 ◽  
Vol 854 (1) ◽  
pp. 012020
Author(s):  
J Delic ◽  
P Ikonic ◽  
M Jokanovic ◽  
V Banjac ◽  
T Peulic ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Regression Analysis ◽  
Textural Properties ◽  
Poultry Meat ◽  
Brewer’S Spent Grain ◽  
Extruded Snacks ◽  
Negative Effect ◽  
Spent Grain ◽  
Textural Parameters ◽  
Snack Products

Abstract The incorporation of protein- and fibre-rich ingredients into starch-based extruded snacks is of interest for obtaining healthy products. However, development of this type of product has been limited, since protein and dietary fibre have negative effect on textural properties of extruded snacks. In the present study, response surface methodology was used in order to evaluate the effect of different ratios of mechanically deboned poultry meat (MDPM) and brewer’s spent grain (BSG), as well as screw speeds, on hardness, firmness and crispiness of the extrudates produced. Regression analysis showed that BSG and screw speed had significant effects on all textural parameters, while MDPM had a significant effect only on the crispiness of snack products.

scholarly journals Studies on sensory and textural properties of milk cake using response surface methodology

2018 ◽  
Author(s):  
R. Kaur ◽  
P. K. Singh ◽  
G. Talwar ◽  
Anurag .
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Milk Fat ◽  
Sugar Content ◽  
Textural Properties ◽  
Sensory Profile ◽  
Artificial Sweetener ◽  
High Sugar Content ◽  
Textural Parameters ◽  
Central Composite

Milk cake is one of the most popular traditional sweets of India especially popular in Northern and Central part of India. High sugar content in milk cake poses severe restriction in its consumption. Sucrose was successfully replaced with artificial sweetener sucralose along with addition of bulking agent maltodextrin to provide a characteristic texture to the product. The level of milk fat and sucralose were optimised using response surface methodology. Central composite rotatable design was used with two independent variables i.e. milk fat (3-6%) and sucralose (0.03-0.07%). The optimisation was done on the basis of sensory profile assessment and important textural parameters i.e. hardness and adhesiveness. Milk cake prepared with 6% milk fat and 0.07% sucralose level gave optimised product.

PENGARUH GAYA KEPEMIMPINAN, MOTIVASI KERJA DAN KOMPETENSI TERHADAP KINERJA PEGAWAI PADA DINAS PEMBERDAYAAN MASYARAKAT DAN DESA PROVINSI SUMATERA BARAT

2020 ◽  
Author(s):  
Mafral
Keyword(s):  
Regression Analysis ◽  
Leadership Style ◽  
Work Motivation ◽  
Employee Performance ◽  
High Reliability ◽  
Test Results ◽  
Eligibility Criteria ◽  
Validity Test ◽  
Negative Effect ◽  
Independent Variable

The independent independent variables in this study as many as 89 respondents are determined by using saturated samples. To know the influence of independent variable to dependent variable partially, used t test. While to know the effect of independent variable to dependent variable simultaneously, used F test. The assumption used in the validity test is if R-count> R-table item is declared valid. The R-arithmetic shown in the table above, from each item indicates that R-arithmetic> R- table so the item is declared valid. Based on the validity test of the instrument of Leadership Style, Work Motivation, and Competence on Employee Performance, all items are declared valid and reliability test results indicate that the instrument has high reliability. This means that the eligibility criteria of the Instrument of Leadership Style, Work Motivation, Competency and Employee Performance have met the criteria of good instrument requirements, that is valid and reliable. The result of regression analysis of Leadership Style obtained by tcount = 20,91 while ttable value = 1,988 tcount> ttable proved variable of Leadership Style influence to Employee Performance. Work Motivation regression analysis obtained tcount = 17.62 while the value ttable = 1.988 tcount> ttabel proven Motivational Work variables influence on Employee Performance. Regression analysis Competence obtained value tcount = - 06.85 while ttable =1.988 so thitung> ttable and proven variable Competence have a negative effect on Employee Performance.

Influence of κ-Carrageenan, Modified Starch and Inulin Addition on Rheological and Sensory Properties of Non-fat and Non-added Sugar Dairy Dessert

2020 ◽  
Vol 16 (4) ◽  
pp. 462-469
Author(s):  
Zhaleh Sheidaei ◽  
Bahareh Sarmadi ◽  
Seyede M. Hosseini ◽  
Fardin Javanmardi ◽  
Kianoush Khosravi-Darani ◽  
...  
Keyword(s):  
Storage Modulus ◽  
Loss Modulus ◽  
Viscoelastic Behavior ◽  
Textural Properties ◽  
Complex Viscosity ◽  
Sensory Properties ◽  
Modified Starch ◽  
Consumer Health ◽  
Added Sugar ◽  
Textural Parameters

<P>Background: The high amounts of fat, sugar and calorie existing in dairy desserts can lead to increase the risk of health problems. Therefore, the development of functional and dietary forms of these products can help the consumer health. </P><P> Objective: This study aims to investigate the effects of &#954;-carrageenan, modified starch and inulin addition on rheological and sensory properties of non-fat and non-added sugar dairy dessert. </P><P> Methods: In order to determine the viscoelastic behavior of samples, oscillatory test was carried out and the values of storage modulus (G′), loss modulus (G″), loss angle tangent (tan &#948;) and complex viscosity (&#951;*) were measured. TPA test was used for analysis of the desserts’ texture and textural parameters of samples containing different concentrations of carrageenan, starch and inulin were calculated. </P><P> Results: All treatments showed a viscoelastic gel structure with the storage modulus higher than the loss modulus values. Increasing amounts of &#954;-carrageenan and modified starch caused an increase in G′ and G″ as well as &#951;* and a decrease in tan &#948;. Also, firmness and cohesiveness were enhanced. The trained panelists gave the highest score to the treatment with 0.1% &#954;-carrageenan, 2.5% starch and 5.5% inulin (sucralose as constant = 0.25%) and this sample was the best treatment with desirable attributes for the production of non-fat and non-added sugar dairy dessert. </P><P> Conclusion: It can be concluded that the concentration of &#954;-carrageenan and starch strongly influenced the rheological and textural properties of dairy desserts, whereas the inulin content had little effect on these attributes.</P>

scholarly journals Biosurfactant from endophytic Bacillus pumilus 2A: physicochemical characterization, production and optimization and potential for plant growth promotion

2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Olga Marchut-Mikołajczyk ◽  
Piotr Drożdżyński ◽  
Arkadiusz Polewczyk ◽  
Wojciech Smułek ◽  
Tadeusz Antczak
Keyword(s):  
Phaseolus Vulgaris ◽  
Carbon Source ◽  
Plant Growth ◽  
Taguchi Method ◽  
Beta Vulgaris ◽  
Food Processing ◽  
Bacillus Pumilus ◽  
Brewer’S Spent Grain ◽  
Spent Grain ◽  
By Products

Abstract Background Microbial surfactants called biosurfactants, thanks to their high biodegradability, low toxicity and stability can be used not only in bioremediation and oil processing, but also in the food and cosmetic industries, and even in medicine. However, the high production costs of microbial surfactants and low efficiency limit their large-scale production. This requires optimization of management conditions, including the possibility of using waste as a carbon source, such as food processing by-products. This papers describes the production and characterization of the biosurfactant obtained from the endophytic bacterial strain Bacillus pumilus 2A grown on various by-products of food processing and its potential applications in supporting plant growth. Four different carbon and nitrogen sources, pH, inoculum concentration and temperature were optimized within Taguchi method. Results Optimization of bioprocess within Taguchi method and experimental analysis revealed that the optimal conditions for biosurfactant production were brewer’s spent grain (5% w/v), ammonium nitrate (1% w/v), pH of 6, 5% of inoculum, and temperature at 30 °C, leading to 6.8 g/L of biosurfactant. Based on gas chromatography–mass spectrometry and Fourier transform infrared spectroscopy analysis produced biosurfactant was determined as glycolipid. Obtained biosurfactant has shown high and long term thermostability, surface tension of 47.7 mN/m, oil displacement of 8 cm and the emulsion index of 69.11%. The examined glycolipid, used in a concentration of 0.2% significantly enhanced growth of Phaseolus vulgaris L. (bean), Raphanus L. (radish), Beta vulgaris L. (beetroot). Conclusions The endophytic Bacillus pumilus 2A produce glycolipid biosurfactant with high and long tem thermostability, what makes it useful for many purposes including food processing. The use of brewer’s spent grain as the sole carbon source makes the production of biosurfactants profitable, and from an environmental point of view, it is an environmentally friendly way to remove food processing by products. Glycolipid produced by endophytic Bacillus pumilus 2A significantly improve growth of Phaseolus vulgaris L. (bean), Raphanus L. (radish), Beta vulgaris L. (beetroot). Obtained results provide new insight to the possible use of glycolipids as plant growth promoting agents.

scholarly journals Potential of Brewer’s Spent Grain as a Potential Replacement of Wood in pMDI, UF or MUF Bonded Particleboard

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 319
Author(s):  
Marius Cătălin Barbu ◽  
Zeno Montecuccoli ◽  
Jakob Förg ◽  
Ulrike Barbeck ◽  
Petr Klímek ◽  
...  
Keyword(s):  
Internal Bond ◽  
Mechanical Performance ◽  
Animal Feed ◽  
Urea Formaldehyde ◽  
Modulus Of Rupture ◽  
Brewer’S Spent Grain ◽  
Beer Brewing ◽  
Removal Of Heavy Metals ◽  
Dry Conditions ◽  
Spent Grain

Brewer’s spent grain (BSG) is the richest by-product (85%) of the beer-brewing industry, that can be upcycled in a plentiful of applications, from animal feed, bioethanol production or for removal of heavy metals from wastewater. The aim of this research is to investigate the mechanical, physical and structural properties of particleboard manufactured with a mixture of wood particles and BSG gradually added/replacement in 10%, 30% and 50%, glued with polymeric diisocyanate (pMDI), urea-formaldehyde (UF) and melamine urea-formaldehyde (MUF) adhesives. The density, internal bond, modulus of rupture, modulus of elasticity, screw withdrawal resistance, thickness swelling and water absorption were tested. Furthermore, scanning electron microscopy anaylsis was carried out to analyze the structure of the panels after the internal bond test. Overall, it was shown that the adding of BSG decreases the mechanical performance of particleboard, due to reduction of the bonding between wood and BSG particles. This decrease has been associated with the structural differences proven by SEM inspection. Interaction of particles with the adhesive is different for boards containing BSG compared to those made from wood. Nevertheless, decrease in the mechanical properties was not critical for particleboards produced with 10% BSG which could be potentially classified as a P2 type, this means application in non-load-bearing panel for interior use in dry conditions, with high dimensional stability and stiffness.

scholarly journals Sugar and no sugar added fruit microalgae-enriched jams: a study about their physicochemical, rheological, and textural properties

2021 ◽  
Author(s):  
Zaida Natalia Uribe-Wandurraga ◽  
María Bravo-Villar ◽  
Marta Igual ◽  
Carmen Savall ◽  
Purificación García-Segovia ◽  
...  
Keyword(s):  
Food System ◽  
Textural Properties ◽  
Arthrospira Platensis ◽  
Microalgae Biomass ◽  
Textural Parameters ◽  
Weak Gel ◽  
Biomass Extract ◽  
And Control ◽  
Colour Coordinates ◽  
Control Samples

AbstractJams are preparations of fruits whose main preserving agent is sugar. Due to this, health concerns of consumers have resulted in a sugar reduction, and its replacement using alternative sweeteners and introducing new ingredients enhancing nutritional properties. In this study, four types of fruits jams (plum, strawberry, apple, and peach), with or without sugar, were prepared using two microalgae biomass, Arthrospira platensis (Spirulina) and Chlorella vulgaris, and Dunaliella salina extract as ingredients at different mix levels of concentrations, 0.10%–0.10%–0.05% respectively, for plum; 0.04%–0.00%–0.01 respectively, for strawberry; 0.06%–0.04%–0.00% respectively, for apple and 0.00%–0.01%–0.04% respectively, for peach. Physicochemical, rheological, and textural parameters were evaluated. Substitution of sugar/fructose syrup in the jam’s preparation caused changes in pH values, solid soluble content, and rheological and textural properties compared to sugar jams. Using sugar or sweeteners as isomalt, stevia and sucralose and microalgae biomass or extract showed significant changes in colour coordinates, however, these differences were not perceptible by the human eye. Jams containing microalgae biomass-extract showed higher G', G'', G*, and η* values than their corresponding control samples. All the jams presented weak-gel characteristics, distinguishing fruit jams. However, the results of weak-gel model analysis suggest that the influence of the different ingredients in the food system depends not only on their concentration but also on the interactions in the gel structure. Strawberry and apple jams showed no significant differences between microalgae biomass-extract samples and control samples, for both sugar and no sugar added jams being the best-obtained samples.

scholarly journals Recycling of Brewer’s Spent Grain as a Biosorbent by Nitro-Oxidation for Uranyl Ion Removal from Wastewater

ACS Omega ◽  
2021 ◽  
Author(s):  
Yi Su ◽  
Marco Wenzel ◽  
Silvia Paasch ◽  
Markus Seifert ◽  
Wendelin Böhm ◽  
...  
Keyword(s):  
Uranyl Ion ◽  
Brewer’S Spent Grain ◽  
Ion Removal ◽  
Spent Grain
Sign in / Sign up

Export Citation Format

Share Document