scholarly journals Effect of selection methods on seed potato quality in the following season

2021 ◽  
Vol 922 (1) ◽  
pp. 012015
Author(s):  
N Gunadi ◽  
A Pronk ◽  
A A Kartasih ◽  
L Prabaningrum ◽  
T K Moekasan ◽  
...  
Keyword(s):  
Seed Potato ◽  
Block Design ◽  
Growing Season ◽  
Selection Method ◽  
Selection Methods ◽  
Plant Selection ◽  
West Java ◽  
Potato Quality ◽  
Randomized Complete Block Design

Abstract Most potato farmers in Indonesia select the small tubers at harvest for planting in the following season, the so-called farmers’ practice (FP). This propagation method is cheap, but the small tubers may come from less healthy plants, which increases the build-up of diseases with accelerated yield decreases over the seasons. Alternatively, farmers may identify healthy plants within the growing season and select those for propagation, the so-called positive plant selection method (PPSM). An experiment was carried out to evaluate the effects of PPSM compared to FP on yields in the following season in the two main potato growing areas of West Java, i.e., Pangalengan and Garut. Generations G2 and G3 of cv. Granola and one generation of the imported cv. Atlantic were used. Selected seeds using PPSM and FP were planted in the second season in a randomized complete block design. Results show that yields of seeds selected through PPSM were significantly higher compared to seeds selected through FP, over both locations, on average, 7.4, 5.5 and 1.2 ton ha−1 for Granola G2 and G3, and the Atlantic, respectively. These yield increases represent an increase in the gross revenue of 30.8 to 51.8 million IDR ha−1 for Granola and 1.9 to 7.8 million IDR ha−1 for Atlantic at a farm gate price of 7,000 and 6,500 IDR kg−1, respectively. This study confirms that PPSM is superior to FP and improves the quality of the farms saved seeds.

scholarly journals Plant spacing and pollen quantity on yield and quality of squash seeds

2003 ◽  
Vol 21 (3) ◽  
pp. 443-447 ◽  
Author(s):  
Márcio S. de Lima ◽  
Antonio I. I. Cardoso ◽  
Marcelo F. Verdial
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Block Design ◽  
Fruit Production ◽  
Plant Spacing ◽  
Plant Seed ◽  
Yield And Quality ◽  
Randomized Complete Block Design ◽  
Pollen Quantity

Squash seeds yield and quality can be improved by proper population plant spacing and the pollen quantity, which influences the pollination quality and fertilization. Nine experiments were conducted as a factorial combination of three spacing between plants (0.8 x 0.3, 0.8 x 0.6 and 0.8 x 0.9 m), two quantities of pollen (50% of an anther and another entire one) and natural insect pollination. Seed and fruit production parameters, and seed quality were evaluated. A randomized complete block design, five replications, with ten plants per plot was adopted. Larger plant spacing increased the average number of mature fruits and seed yield per plant. Seed yield was directly proportional to the amount of pollen used during pollination. Higher amounts of pollen resulted in higher seed yield per area, but the plant spacing did not affect this characteristic. Manual pollination, using a whole anther, did not differ from natural pollination in relation to seed yield and quality.

scholarly journals Agronomic Efficiency of Hybrids of Corn to Nitrogen, Phosphorus and Potassium Targeting Fresh Corn

2019 ◽  
Vol 11 (9) ◽  
pp. 120
Author(s):  
Cecília L. P. Resende ◽  
Leandro F. Damaso ◽  
Mylla C. R. Ávila ◽  
Daniel D. C. Carvalho ◽  
Patrícia G. S. Melo ◽  
...  
Keyword(s):  
Block Design ◽  
Corn Hybrids ◽  
Agronomic Efficiency ◽  
Quality Of Water ◽  
Randomized Complete Block Design ◽  
Technological Level ◽  
Phosphorus And Potassium ◽  
The One ◽  
Nitrogen Phosphorus

The efficiency and responsiveness agronomic to the main macronutrients is becoming increasingly important due to the risk of supply, since it is a finite resource. In addition, excess fertilizer decreases the quality of water and air. Thus, the objective of this work was to assess the corn hybrids in terms of their efficiency and responsiveness to nitrogen (N), phosphorus (P) and potassium (K), and identify the ones most suitable for fresh consumption, according to the product type and technological level to be adopted by the farmer. The randomized complete block design in a 10 × 3 (hybrids and doses) factorial scheme was adopted for the experiment, with three replications, for two season crops (2013/14 and 2014/15). Ten hybrids (2B512PW, 2B587PW, 2B707PW, 30F35HR, 30F53YH, AG1051, BRS1055, BM3061, P3646H e P3862YH) were used in isolation under low availability (without application) and partial, of N, P and K, in an isolated manner, also evaluated under the recommended dose, aiming at fresh consumption. The most efficient and responsive hybrid must first be identified in isolation, based on the availability it is subjected to and later, by its sale, focused on fresh consumption. The hybrids indicated for low availability (low technological level) were BRS1055 and 30F53YH, with respect to responsiveness or agronomic efficiency, the hybrid P3862YH was the one that presented the best performance and indicated for technological levels of medium to high, considering the classification obtained for the nitrogen, phosphorus, and potassium for production vegetable corn.

scholarly journals Physical Bean Quality of Arabica Coffee (Coffea Arabica) Cultivated at High and Medium Altitude

2016 ◽  
Vol 32 (3) ◽  
pp. 151-161
Author(s):  
Dwi Nugroho ◽  
Panjisakti Basunanda ◽  
Suryadi Mw
Keyword(s):  
Coffea Arabica ◽  
Block Design ◽  
Research Station ◽  
Physical Quality ◽  
Arabica Coffee ◽  
Randomized Complete Block Design ◽  
Before And After ◽  
Coffee Cultivation ◽  
Cup Quality

Reducing productivity, outbreak of insects and diseases, and decreasingin physical and cup quality are major problems for Arabica coffee cultivation inmedium altitude. The aim of this study was to investigate the effect of altitude onphysical quality in eight genotypes of Arabica coffee. This research was conductedat two locations i.e. Andungsari Research Station-Bondowoso (1250 m asl. ashigh altitude) and Kalibendo Estate-Banyuwangi (700 m asl. as medium altitude).Randomized complete block design was used with three replications. Collecteddata consisted of outturn, weight of 100 beans, shape bean normality, apparentswelling, bulk density before and after roasting. Combined analysis on the physicalquality traits of green bean showed genotype x altitude interactions on weight of100 beans, percentage of normal beans and percentage of empty bean. Altitudesignificantly influenced coffee outturn. Decreasing in altitude from 1.250 m asl.to 700 m asl. caused declining in the outturn as much 32.9%. BP 700A, K 29, K34, K 79, and K 99 were genotypes that stable to produce normal bean and emptybeans at high and medium altidute, while K 8, K 130, and SIG were genotypeswith high normal beans at high altitude but not stable. Genotype x altitude interactiondid not occur for physical quality of other variables of outturn, bulk densitybefore and after roasting, apparent swelling, percentage of round beans,percentage of elephant beans, and percentage of triage beans. Altitude showedsignificant effect on all of physical quality of bean variables.

scholarly journals Assessing the Response of Sesame to Inorganic and Organic Nutrient Sources

2019 ◽  
Vol 12 (1) ◽  
pp. 108
Author(s):  
Paul Anguria ◽  
George N. Chemining’wa ◽  
Richard N. Onwonga ◽  
Michael A. Ugen
Keyword(s):  
Seed Yield ◽  
Finger Millet ◽  
Crop Residues ◽  
Seed Quality ◽  
Block Design ◽  
Mineral Fertilizers ◽  
Fertilizer Rate ◽  
Nutrient Sources ◽  
Randomized Complete Block Design

Sesame (Sesamum indicum. L) is one of the main sources of livelihoods in northern Uganda. However, its production is constrained by low soil fertility and moisture levels. A study was conducted at Serere, Uganda in 2013 and 2014 to investigate the effect of organo-mineral fertilizers on growth, seed yield and nutritional quality of sesame. The design of the experiment was a randomized complete block design with three replications. The treatments comprised: control (no soil amendment), mixtures of 4 crop residues each at (3 and 6 t/ha) and two rates of N, P and K. Finger millet husks (3 t/ha) plus lower fertilizer rate (30 kg N-25 kg P-40 Kg K/ha) had significantly higher seed yield of sesame; while finger millet husks (6 t/ha) plus higher fertilizer rate (60 kg N-50 kg P-80 Kg K/ha) significantly increased vegetative growth of sesame. Finger millet husks (6 t/ha) plus lower fertilizer rate had significantly higher seed crude protein content of sesame; while cowpea husks (3 t/ha) plus higher fertilizer rate and groundnut shells (3 t/ha) plus lower fertilizer rate produced significantly higher seed total ash and seed oil content of sesame, respectively. This study has demonstrated that application of a mixture of crop residues and inorganic fertilizers is the best treatment in enhancing growth, seed yield and nutritional seed quality of sesame.

scholarly journals Productivity, quality of fruits and architecture of Jalapeño pepper at different planting densities

2019 ◽  
Vol 37 (3) ◽  
pp. 331-337
Author(s):  
Carlos Francisco Ragassi ◽  
Juliana Zucolotto ◽  
Lucas M Gomes ◽  
Cláudia SC Ribeiro ◽  
Nuno Rodrigo Madeira ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Plant Architecture ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Randomized Complete Block Design ◽  
Total Titratable Acidity ◽  
Second Year ◽  
Increase In Productivity

ABSTRACT Mechanizing the harvest of Jalapeño pepper involves changes in the production system. Spacings between plants in rows (10 to 40 cm; 60 cm fixed between rows) were evaluated in relation to plant architecture, productivity and fruit quality of cultivar BRS Sarakura during three years, in a randomized complete block design with five replicates. Productivity (41.9 to 78.8 t ha-1) and plant height (40.1 to 47.3 cm) responded linearly to density; on the other hand, productivity per plant responded negatively (0.48 to 1.04 kg plant-1). The stem first bifurcation height was little influenced. Fruit chemical analyses were carried out in the second year of the experiment; spacing significantly influenced pH (5.36 to 4.84), total titratable acidity (TTA) (0.48 to 0.36%) and total soluble solids (TSS)/TTA ratio (11.5 to 15.6); no influence on TSS (5.65%) was noticed, though. The increase of plant population provided an increase in productivity without affecting fruit quality; the highest height of the first bifurcation achieved may not be enough to enable mechanized harvesting of the cultivar BRS Sarakura.

scholarly journals Production and quality of banana ‘BRS Conquista’ bagged with different colored polypropylene bags

2019 ◽  
Vol 13 (2) ◽  
pp. 171-177
Author(s):  
Rafaelly Calsavara Martins ◽  
Jackson Mirellys Azevêdo Souza ◽  
Marcelo De Souza Silva ◽  
Nathália De Souza Parreiras ◽  
Marcela Sant'Anna Cordeiro da Silva ◽  
...  
Keyword(s):  
Total Mass ◽  
Mass Number ◽  
New Technologies ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Randomized Complete Block Design ◽  
Plastic Bag ◽  
Maturation Index

Worldwide, the second most traded fruit is banana, which is highly appreciated by Brazilian consumers. Moreover, new technologies have been used to improve fruit quality during cultivation. This study aimed to assess the influence of plastic bag colors on the production and quality of banana ‘BRS Conquista’. The treatments consisted of the use of commercial polypropylene bags e colored white, black, red or blue, in addition to the control (non-bagged). This study used a randomized complete block design with five treatments, four replicates and four plants per plot, totalling 80 plants. The assessments consisted of bunch mass; rachis mass; fruit total mass; mean cluster mass; number of fruits per bunch and per cluster; and fruit length and diameter; along with fruits physicochemical traits, such as soluble solids, titratable acidity, pulp/peel ratio and maturation index. The results indicated that no interference was obtained from the different plastic bag colors in the productive variables. However, a greater content of soluble solids was observed in the non-bagged bunches.

scholarly journals Biofumigation efficacy of spider plant (Cleome gynandra L.) accessions on nematode control in tuberose (Polianthes tuberosa L.)

2020 ◽  
Vol 2 (2) ◽  
Author(s):  
Stella Jerono Keter ◽  
Samuel Nyalala ◽  
Joshua Ogweno
Keyword(s):  
Block Design ◽  
Growth Yield ◽  
Research Field ◽  
Growth And Yield ◽  
Yield And Quality ◽  
Flower Yield ◽  
Cleome Gynandra ◽  
Randomized Complete Block Design ◽  
Spider Plant

Tuberose (Polianthes tuberosa L.) is a perennial summer flower grown by smallholders in Kenya for export. However, its production and export volumes have declined drastically due to nematodes infestation. This study evaluated the effect of Cleome gynandra accessions on nematode management on tuberose. Experiment was conducted at the Horticulture Research Field, Egerton University, Kenya using a randomized complete block design with four replications. The treatments were: five accessions of C. gynandra namely ‘Simlaw’, ‘Egerton’, ‘Taastrup’, ‘PS’ and ‘IP8’, applied at 6 kg/m2 and compared with Brassica napus, solarization and untreated control. Data was collected on growth and yield parameters, nematode infestation and quality of tuberose. Data collected was subjected to analysis of variance at p≤0.05 and means separated using Tukey’s test. Biofumigation with Cleome gynandra accessions helped to reduce nematode population by 34%, gall numbers by 83% and galling index by be 96% when compared with the control. Use of biofumigation helped to improve plant height and leaf number of tuberose by 16% and 87%, respectively, when compared with the control. Use of biofumigation helped to improve spike length by 32%, marketable spikes by 80%, and flower yield by 90% and reduced nonmarketable spikes by 95% when compared with the control. Based on the above results, use of Cleome gynandra accessions and other biofumigants such as rape seed can be used to manage nematodes and improve growth, yield and quality of tuberose. 

scholarly journals Cotton and fiber quality in function of picker harvest speed

2018 ◽  
Vol 22 (8) ◽  
pp. 583-588 ◽  
Author(s):  
Elizabeth H. Kazama ◽  
Rouverson P. da Silva ◽  
Antônio T. S. Ormond ◽  
Aline S. Alcântara ◽  
Welington G. do Vale
Keyword(s):  
Cotton Fiber ◽  
Fiber Quality ◽  
Block Design ◽  
Mato Grosso ◽  
Spindle System ◽  
Cotton Price ◽  
Randomized Complete Block Design ◽  
Four Blocks ◽  
Time Of Harvest

ABSTRACT Cotton price is determined by the quality of the fiber, which can be damaged at the time of harvest, in addition to quantitative losses of non-harvested plume. Therefore, this study aimed to analyse soil and plant losses, and the quality of cotton fiber in relation to five harvest speeds (5, 6, 7, 8, and 9 km h-1) in the spindle system (picker). The experiment was conducted in Lucas do Rio Verde, Mato Grosso, Brazil. A randomized complete block design was used on plots of 0.9 ha, with 20 plot, five speeds, and four blocks. The results showed that the studied speeds did not significantly influence losses on the soil and plant, or the quality of the cotton fiber; therefore, the highest speed may be recommended.

scholarly journals Effects of potassium application on yield attributes, yield and grain quality of lentil in terrace soil of Joydebpur

2020 ◽  
Vol 44 (4) ◽  
pp. 599-607
Author(s):  
MA Quddus ◽  
MA Hossain ◽  
HM Naser ◽  
S Aktar
Keyword(s):  
Nutrient Concentration ◽  
Grain Quality ◽  
Block Design ◽  
Research Field ◽  
Yield Potential ◽  
Yield Attributes ◽  
Yield Increase ◽  
Randomized Complete Block Design ◽  
Yield Maximization

An experiment was conducted in the research field of Pulses Research Sub-Station, BARI, Gazipur during two consecutive years of 2015-16 and 2016-17 to determine the suitable dose of potassium for achieving higher yield attributes, nodulation, nutrient concentration and yield maximization of lentil. There were 5 treatments viz. T1 = Control, T2 = 30 kg K ha-1, T3= 40 kg K ha-1, T4= 50 kg K ha-1 and T5= 60 kg K ha-1 along with the blanket dose of fertilizers of N, P, S, Zn and B @ 15, 20, 10, 2 and 1.5 kg ha-1, respectively for all treatments. The experiment was laid out in randomized complete block design (RCBD) with three replications. Results revealed that the highest seed yield (1092 kg ha-1) of lentil (mean of two years) was found in T4 followed by T5 treatment and the lowest (736 kg ha-1) was noted in K control (T1) treatment. The highest % yield increase over control (48.3%) was recorded from T4 treatment. The maximum nodulation was found in T5 followed by T4 treatment. The highest protein (26.9%), N, P, K, S, Zn and B concentrations of lentil seed were recorded in T4 treatment. Therefore, the results suggest that the appliction of 50 kg K ha-1 along with N15P20S10Zn2B1.5 kg ha-1 are optimum for achieving higher yield potential of lentil in terrace soils of Bangladesh. Bangladesh J. Agril. Res. 44(4): 599-607, December 2019

scholarly journals Effect of the Intensity of Weed Harrowing with Spike-Tooth Harrow in Barley-Pea Mixture on Yield and Mycobiota of Harvested Grains

Agronomy ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 103 ◽  
Author(s):  
Rafał Ogórek ◽  
Agnieszka Lejman ◽  
Piotr Sobkowicz
Keyword(s):  
Crop Yield ◽  
Block Design ◽  
Fungal Abundance ◽  
Grain Moisture ◽  
Internal Structures ◽  
Mechanical Methods ◽  
Randomized Complete Block Design ◽  
Chlorophenoxyacetic Acid ◽  
The Relationship

Harrowing is one of the most popular mechanical methods to control weeds. Nevertheless, the relationship between the effect of different harrowing intensities using spike-tooth harrow in barley-pea intercrop on the yield and mycoflora of grains has not yet been studied. Therefore, the aim of this study was to assess the effect of harrow intensity using spike-tooth harrow in barley-pea mixture on the mycological quality of harvested grains, grain yield, as well as influence of barley and pea grain moisture on the abundance of fungi. The field experiment was carried out during 2010–2012, and it was conducted using a randomized complete block design with four replicates. Weed control was mechanical and chemical. In this study, we have shown that harrowing in barley-pea intercrops does not reduce the yield of either mixture components, both with respect to grain quantity or mycological quality after harvest, compared to controls—without harrowing and the herbicide MCPA (2-methyl-4-chlorophenoxyacetic acid). However, increasing the intensity of harrowing did not result in a consistently larger crop yield or reduction in fungal abundance in the grains. The grains’ internal structures and surface of both tested components of the mixture were colonized to a large extent by cosmopolitan fungi, of which Alternaria alternata (Fr.) Keissl. was the most abundant.

Sign in / Sign up

Export Citation Format

Share Document