scholarly journals Biodiversity of Associated Megabenthic Invertebrate of Corall Reef Ecosystem of Petong Island Batam Indonesia

2021 ◽  
Vol 934 (1) ◽  
pp. 012070
Author(s):  
Y I Siregar ◽  
S Nasution ◽  
R Kurniawan
Keyword(s):  
Sea Urchin ◽  
Environmental Concern ◽  
Coral Cover ◽  
Chemical Properties ◽  
High Density ◽  
Giant Clam ◽  
Dead Coral ◽  
Management Area ◽  
Physical And Chemical ◽  
Reef Ecosystem

Abstracts Global warming and climate changes were of the main environmental concern of marine scientist in the last three decade. As a biodiversity hotspot, marine coastal ecosystem faced an environmental threat because of increasing sea surface temperature (SST) and land base effluent, which in turn had an impact on the biodiversity of megabenthic faunal on coral reef community. The present paper studied the current condition of reef ecosystem as well as biodiversity of megabenthic community in Petong Island, a core zone of Batam Marine Management Area (BMMA), Riau Archipelago Province. Gradual changes of physical and chemical properties of seawater originated from coastal activities presumably has caused an effect on benthic faunal community structure. It revealed that benthic lifeform coral cover account for 30,53%, categorized into fairly good, whereas abiotic sand cover of 16,53%. The lifeform consists of Acropora (AC)1.73% and non-Acropora 28,80%. Death coral with algae (DCA) account for 40,40% and death corall (DC) 2,80%, Soft Corall (SC) 1,20%, fleshy seaweed (FS) 0,07%, other fauna (OT) 1,47%, and rubble (R) 7,00%. Apparently, only 4 of target species megabenthic fauna from eight, were eccounterred including; seaurchin (Diadema sp.), topshell (Drupella sp.), giant clam (Tridacna sp.), trochus (Trochus sp.), with density of each megabenthic fauna calculated 5929, 1857, 71 and 71 ind/ha, respectively. It appeared that sea urchin were the highest density and followed by topshell (Drupella sp). Sea urchin were noted as a bioindicator of reef ecosystem health. High density of sea urchin may indicate that reef in unhealthy state. The presence of Diadema Sitosum indicate that dead coral were present and it feed on algae growing in dead coral. High density of sea urchin may indicate that reef in unhealthy state

scholarly journals KONDISI EKOSISTEM TERUMBU KARANG DI PERAIRAN KRUENG RAYA, KABUPATEN ACEH BESAR

2021 ◽  
Vol 8 (1) ◽  
pp. 11
Author(s):  
Nurul Najmi ◽  
M Rizki Fazillah ◽  
Muhammad Agustiar
Keyword(s):  
Coral Reef ◽  
Coral Cover ◽  
Live Coral ◽  
Coral Mortality ◽  
Coral Reef Ecosystem ◽  
Dead Coral ◽  
High Increase ◽  
Mortality Index ◽  
Malacca Strait ◽  
Reef Ecosystem

This study aims to analyze the condition of the coral reef ecosystem including the substrate, genus composition, and the level of coral mortality in the waters of the Malacca Strait, Masjid Raya District, Aceh Besar District. The research was conducted from October 2016 to October 2019 in the waters of the Malacca Strait, Masjid Raya District, Aceh Besar District. The research site is divided into three stations consisting of Lhok Mee Station, Ahmad Rhang Manyang and Benteng Inong Balee Station. Data were collected using the Point Intercept Transect method. The results showed that the condition of coral reefs at Lhok Mee Station was in the damaged category with coral cover ranging from 6.56% - 13.44%. Ahmad Rhang Manyang Station is included in the moderate to good category with coral cover ranging from 38.75% - 67.19%. Meanwhile, Benteng Inong Balee Station is included in the medium category with coral cover ranging from 45.94% - 56.88%. The monitoring results found that 30 coral genera with the highest composition of the coral genera came from the Porites genus, while other coral genera were unevenly distributed. The value of the mortality index for Lhok Mee Station shows a high increase in mortality of live coral to dead coral. Meanwhile, Ahmad Rhang Manyang and Benteng Inong Balee stations have low coral mortality index values.

Understanding Soils in Urban Environments

2011 ◽  
Author(s):  
Pam Hazelton ◽  
Brian Murphy
Keyword(s):  
Urban Soils ◽  
Environmental Concern ◽  
Urban Forestry ◽  
Chemical Properties ◽  
Green Roofs ◽  
Urban Environments ◽  
Infrastructure Development ◽  
Structural Problems ◽  
Wide Range ◽  
Physical And Chemical

Soil properties such as water retention, salinity and acidity are not just issues for agriculture and forestry. They are equally as significant in creating environmental and structural problems for buildings and other engineering works. As an increasing proportion of the world's population is living in cities, and building and related infrastructure development continues, these problems assume ever-greater importance. In addition, existing works contribute to urban soil erosion and pollution as well as increased levels of urban runoff. Understanding Soils in Urban Environments explains how urban soils develop, change and erode. It describes their physical and chemical properties and focuses on specific soil problems, such as acid sulfate soils, that can cause environmental concern and also affect engineering works. It also addresses contemporary issues such as green roofs, urban green space and the man-made urban soils that plants may need to thrive in. It provides a concise introduction to all aspects of soils in urban environments and will be extremely useful to students in a wide range of disciplines, from soil science and urban forestry and horticulture, to planning, engineering, construction and land remediation, as well as to engineers, builders, landscape architects, ecologists, planners and developers.

scholarly journals Perspective on Intermetallics Towards Efficient Electrocatalytic Water-Splitting

2021 ◽  
Author(s):  
Carsten Walter ◽  
Prashanth W. Menezes ◽  
Matthias Driess
Keyword(s):  
Intermetallic Compounds ◽  
Water Splitting ◽  
Active Sites ◽  
Chemical Properties ◽  
High Density ◽  
Physical And Chemical Properties ◽  
Ideal Class ◽  
Physical And Chemical ◽  
Enhanced Conductivity ◽  
And Chemical Properties

Intermetallic compounds exhibit attractive electronic, physical, and chemical properties, especially in terms of a high density of active sites and enhanced conductivity, making them an ideal class of materials for...

Statistical criteria of stellar population types

1966 ◽  
Vol 24 ◽  
pp. 101-110
Author(s):  
W. Iwanowska
Keyword(s):  
Stellar Population ◽  
Chemical Properties ◽  
Spectrophotometric Study ◽  
Physical And Chemical Properties ◽  
Population Type ◽  
The Galaxy ◽  
Distribution Parameters ◽  
Physical And Chemical ◽  
Statistical Criteria ◽  
And Chemical Properties

In connection with the spectrophotometric study of population-type characteristics of various kinds of stars, a statistical analysis of kinematical and distribution parameters of the same stars is performed at the Toruń Observatory. This has a twofold purpose: first, to provide a practical guide in selecting stars for observing programmes, second, to contribute to the understanding of relations existing between the physical and chemical properties of stars and their kinematics and distribution in the Galaxy.

Biophysical Measurement of Molecular Weight of Foot-and-Mouth Disease RNA Fragments

1974 ◽  
Vol 32 ◽  
pp. 262-263
Author(s):  
Sydney S. Breese ◽  
Howard L. Bachrach
Keyword(s):  
Chemical Properties ◽  
Foot And Mouth Disease ◽  
Mouth Disease ◽  
Distilled Water ◽  
Bovine Plasma ◽  
Mouth Disease Virus ◽  
Foot And Mouth ◽  
Carbon Coated ◽  
Rna Fragments ◽  
Physical And Chemical

Continuing studies on the physical and chemical properties of foot-and-mouth disease virus (FMDV) have included electron microscopy of RNA strands released when highly purified virus (1) was dialyzed against demlneralized distilled water. The RNA strands were dried on formvar-carbon coated electron microscope screens pretreated with 0.1% bovine plasma albumin in distilled water. At this low salt concentration the RNA strands were extended and were stained with 1% phosphotungstic acid. Random dispersions of strands were recorded on electron micrographs, enlarged to 30,000 or 40,000 X and the lengths measured with a map-measuring wheel. Figure 1 is a typical micrograph and Fig. 2 shows the distributions of strand lengths for the three major types of FMDV (A119 of 6/9/72; C3-Rezende of 1/5/73; and O1-Brugge of 8/24/73.

Tailoring microstructures of materials through biomimetics

1993 ◽  
Vol 51 ◽  
pp. 500-501
Author(s):  
Mehmet Sarikaya ◽  
Ilhan A. Aksay
Keyword(s):  
Chemical Properties ◽  
Design And Synthesis ◽  
Structure Sensitive ◽  
Macro Scale ◽  
Methods Of Synthesis ◽  
Successive Level ◽  
Engineering Materials ◽  
Physical And Chemical ◽  
And Chemical Properties ◽  
Synthesis Of Materials

Biomimetics involves investigation of structure, function, and methods of synthesis of biological composite materials. The goal is to apply this information to the design and synthesis of materials for engineering applications.Properties of engineering materials are structure sensitive through the whole spectrum of dimensions from nanometer to macro scale. The goal in designing and processing of technological materials, therefore, is to control microstructural evolution at each of these dimensions so as to achieve predictable physical and chemical properties. Control at each successive level of dimension, however, is a major challenge as is the retention of integrity between successive levels. Engineering materials are rarely fabricated to achieve more than a few of the desired properties and the synthesis techniques usually involve high temperature or low pressure conditions that are energy inefficient and environmentally damaging.In contrast to human-made materials, organisms synthesize composites whose intricate structures are more controlled at each scale and hierarchical order.

Response of corn (Zea mays L.) to various organic-based fertilizers in marginal upland of Sta. Rita, Samar

2017 ◽  
pp. 31-43
Author(s):  
Berta Ratilla ◽  
Loreme Cagande ◽  
Othello Capuno
Keyword(s):  
Block Design ◽  
Management Strategies ◽  
Chemical Properties ◽  
Organic Fertilizers ◽  
Growth And Yield ◽  
Physical And Chemical Properties ◽  
Total N ◽  
Randomized Complete Block Design ◽  
Physical And Chemical ◽  
And Chemical Properties

Organic farming is one of the management strategies that improve productivity of marginal uplands. The study aimed to: (1) evaluate effects of various organic-based fertilizers on the growth and yield of corn; (2) determine the appropriate combination for optimum yield; and (3) assess changes on the soil physical and chemical properties. Experiment was laid out in Randomized Complete Block Design, with 3 replications and 7 treatments, namely; T0=(0-0-0); T1=1t ha-1 Evans + 45-30-30kg N, P2O5, K2O ha-1; T2=t ha-1 Wellgrow + 45-30-30kg N, P2O5, K2O ha-1; T3=15t ha-1 chicken dung; T4=10t ha-1 chicken dung + 45-30-30kg N, P2O5, K2O ha-1; T5=15t ha-1 Vermicast; and T6=10t ha-1 Vermicast + 45-30-30kg N, P2O5, K2O ha-1. Application of organic-based fertilizers with or without inorganic fertilizers promoted growth of corn than the control. But due to high infestation of corn silk beetle(Monolepta bifasciata Horns), its grain yield was greatly affected. In the second cropping, except for Evans, any of these fertilizers applied alone or combined with 45-30-30kg N, P2O5, K2O ha-1 appeared appropriate in increasing corn earyield. Soil physical and chemical properties changed with addition of organic fertilizers. While bulk density decreased irrespective of treatments, pH, total N, available P and exchangeable K generally increased more with chicken dung application.

Sign in / Sign up

Export Citation Format

Share Document