scholarly journals Simulated Casualty Evacuation Performance Is Augmented by Deadlift Peak Force

2019 ◽  
Vol 184 (9-10) ◽  
pp. e406-e411 ◽  
Author(s):  
Whitney M Poser ◽  
Kara A Trautman ◽  
Nathan D Dicks ◽  
Bryan K Christensen ◽  
Katie J Lyman ◽  
...  
Keyword(s):  
Lean Mass ◽  
Reaction Force ◽  
Force Plate ◽  
Peak Force ◽  
Army Reserve ◽  
Physical Fitness Test ◽  
And Performance ◽  
Task Trial ◽  
Pearson Correlations ◽  
Training Corps

Abstract Introduction The purpose of the current study was to examine if isometric peak force and rate of force development (RFD) were related to the ability to successfully perform a simulated casualty evacuation task in both unweighted and weighted conditions. Methods Eighteen male participants from Army Reserve Officers’ Training Corps (ROTC) completed a maximum isometric deadlift on a force plate (IRB#HE16227). Isometric peak force and RFD were calculated from ground reaction force. Two simulated casualty evacuation performance trials were then completed. The unweighted trial consisted of lifting and carrying a 75 kg dummy as quickly as possible for 50 m. The weighted trial was similar except 9 kg vests were added to both the simulation dummy and the participant to represent 18 kg of duty gear. Independent sample t-tests and Pearson correlations were performed to compare the characteristics of those who passed and failed the weighted trial. Results All of the participants (n = 18) completed the unweighted casualty evacuation trial, while 72% (n = 13) were able to complete the weighted casualty evacuation trial. The participants that successfully completed the weighted evacuation trial had significantly (p < 0.05) greater isometric peak force (1420 ± 165 vs. 1076 ± 256 N) and lean mass (74.18 ± 3.89 vs. 65.34 ± 3.89 kg) when compared to participants (n = 5) that could not complete the weighted evacuating task trial. Additionally, greater Army Physical Fitness Test scores (288 ± 13 vs. 269 ± 16 arbitrary units) and significantly faster (30.34 ± 4.41 vs. 44.92 ± 10.62 seconds) unweighted evacuation trial times were observed in participants that could complete the weighted evacuation task. Peak force was also significantly correlated with lean mass (r = 0.51, p < 0.05). There was no relationship between RFD and performance of the unweighted or weight trial. Conclusion Isometric deadlift peak force represents an important determinant for the success of a simulated casualty evacuation task and may be a useful marker to include in periodic fitness evaluations of military personnel.

Abstract 482: Differences in Ground Reaction Forces and Chest Compression Release Velocity in Professional and Lay Rescuers With and Without the Use of Real-Time CPR Feedback

Circulation ◽  
2019 ◽  
Vol 140 (Suppl_2) ◽  
Author(s):  
Lyra Clark ◽  
Ben Senderling ◽  
Jeff R Gould ◽  
Chris Kaufman ◽  
Nick Stergiou
Keyword(s):  
Real Time ◽  
Chest Compression ◽  
Reaction Force ◽  
Force Plate ◽  
Compression Cycle ◽  
Reaction Forces ◽  
Force Range ◽  
Favorable Neurological Outcome ◽  
Compression Characteristics ◽  
Pearson Correlations

Purpose: Chest compression release velocity (CCRV) has been associated with survival and favorable neurological outcome after cardiac resuscitation. Both complete chest release and high CCRV contribute to improved venous return during CPR. Differences in compression forces delivered by professional and lay rescuers are reported, which may contribute to differences in CCRV. The aim of this pilot study was to investigate differences in ground reaction force (GRF) and CCRV between professional and lay rescuers during CPR performed on a manikin with and without real-time feedback. Methods: Professional (n = 5) and lay rescuers (n = 11) performed two minutes of continuous compressions on a manikin positioned over a force plate for two trials. CPR feedback provided by a defibrillator was disabled in the first trial and enabled in the second. CPR pads containing an accelerometer were used to calculate individual compression characteristics. Relative maximum and minimum GRFs were calculated for each compression cycle and averaged over each trial. Paired and independent sample t tests and Pearson correlations were conducted in STATA 15.1. Results: CCRV was higher in professionals vs. lay rescuers with feedback disabled and enabled ( p <0.05). Professionals had greater maximal and lower minimum forces than lay rescuers without feedback ( p <0.05), though there were no differences between groups with feedback enabled (Table 1). CCRV was associated with minimum force (r = -0.63, p <0.01) and force range (r = 0.78, p <0.01) in all rescuers. Analysis of GRFs by CCRV for all rescuers indicated lower force minimum (9.71 + 3.16 N, p <0.05) with CCRV >400 mm/s in comparison to CCRV 300-400 mm/s (39.73 + 8.91 N) and CCRV 200-300 mm/s (63.82 + 16.98 N). Conclusions: CPR feedback attenuated differences in GRF between professional and lay rescuers. CCRV was greater in professionals and was associated with measures of GRF, and thus may serve as an indicator of both velocity and amount of chest release.

Biomechanics of Trunk During Walking Carrying Load on One Hand Using Nonlinear Methods

2014 ◽  
Author(s):  
Vikas Yadav ◽  
Maruti Ram Gudavalli ◽  
P. K. Raju ◽  
Dan Marghitu
Keyword(s):  
Correlation Dimension ◽  
Reaction Force ◽  
Force Plate ◽  
Approximate Entropy ◽  
Peak Force ◽  
Erector Spinae ◽  
Trunk Muscles ◽  
Emg Activity ◽  
Median Frequency ◽  
Trunk Motion

Activities of daily living include carrying objects using one hand. Carrying a load using one hand can alter the loading on the musculoskeletal system as well as the walking pattern. The objective of this pilot study was to quantify the ground reaction forces, electromyographic (EMG) activity of trunk muscles, and trunk motion during walking. Nine human volunteers with no symptoms of pain were recruited from the student and employee population of an academic institution. Data were recorded from 8 volunteer subjects. Participants were asked to walk at self-selected speed back and forth at their comfortable speed carrying loads varying from 0 to 25 pounds on right hand on a wooden walking platform for 30 steps/cycles. Motion data were recorded from T1, L1, L3, and S1 vertebrae at a sampling frequency of 120 Hz. Range of Motion (ROM), Correlation Dimension (CoD), and Approximate Entropy (ApEn) was computed using custom written MatLab programs. EMG data were recorded from six muscle groups bilaterally (right and left): Erector Spinae, Multifidus, Latissimus Dorsi, Internal Obliques, External Obliques and Rectus Abdominis at a frequency of 1200 Hz. Root mean square EMG values, Mean and Median Frequency of the EMG data were calculated to observe the effect of increasing load on muscle fatigue using custom developed MatLab program. Ground reaction force (GRF) data were collected using a force plate and the associated 1st peak force (Fz1), 2nd Peak force (Fz3) and minimum force (Fz2) between the two peak forces were calculated during gait cycle. The ROM values had a range from 2.6–3.2 deg. for Lumbar lateral bending (LB), 6.7–8.7 deg. for Thoracic LB. Approximate Entropy (ApEn) values ranged from 0.20–0.40 for Lumbar LB motion and 0.30–0.50 for Thoracic LB motion. Correlation Dimension (CoD) values ranged from 1.20–1.40 for lumbar LB and 1.20–1.30 for Thoracic LB. Normalized GRF increased during walking with increased load. Significance difference (P<0.05) were found for vGRF with increase in load. Motion and EMG data did not reveal any significant differences.

scholarly journals Sex Differences in Body Composition and Fitness Scores in Military Reserve Officers’ Training Corps Cadets

2021 ◽  
Author(s):  
Brandon M Roberts ◽  
Kelsey A Rushing ◽  
Eric P Plaisance
Keyword(s):  
Body Composition ◽  
Fat Mass ◽  
Fat Free Mass ◽  
Army Reserve ◽  
Physical Fitness Test ◽  
Fitness Test ◽  
Passing Rate ◽  
Fitness Tests ◽  
Training Corps ◽  
Reserve Officers Training Corps

ABSTRACT Introduction The cadets in the U.S. Army Reserve Officers’ Training Corps (ROTC) consist of students from varied backgrounds. As part of collegiate ROTC programs, cadets must pass fitness tests and adhere to body composition standards in addition to completing their education. The previous fitness test of record was the Army Physical Fitness Test (APFT), but it was recently changed to the Army Combat Fitness Test (ACFT) to better test soldiers for combat capabilities. As part of the standardized scoring, the ACFT is no longer separated by sex or age as in the APFT, but rather by job duty. The purpose of this study was to characterize the modern ROTC cadet based on body composition measures and APFT and ACFT scores and then determine how those factors are related. Materials and Methods We calculated body mass index (BMI), fat mass, fat-free mass (FFM), fat-free mass index (FFMI), and fat mass index (FMI) (n = 68, 42 males, 26 females). We used Pearson correlations to compare the scores to body composition assessments and Student’s t-tests to determine if there were differences between sexes. We hypothesized that those with higher FFM and FFMI will have a higher passing rate on the ACFT and that males would perform better on the ACFT because of having more FFM. Results We found that cadets, regardless of sex, were borderline overweight using BMI standards and that BMI did not correlate with any fitness tests. When comparing sexes, both males and females had high passing rates on the APFT, but females struggled to pass the ACFT mostly because of the leg tuck. We also found that ACFT scores were strongly correlated with FFM and FFMI, yet no body composition measures were correlated with APFT scores. Conclusions It is clear from our data that structured training programs and nutrition guidance are needed with an emphasis on changing body composition to increase lean mass and strength to increase the performance of ROTC cadets on the ACFT.

The Relationship Between Functional Motor Competence and Performance on the Army Combat Fitness Test in Army Reserve Officer Training Corps Cadets

2022 ◽  
Author(s):  
Bryan Terlizzi ◽  
T Cade Abrams ◽  
Ryan S Sacko ◽  
Amy F Hand ◽  
Kyle Silvey ◽  
...  
Keyword(s):  
Children And Adolescents ◽  
Officer Training ◽  
Motor Competence ◽  
Army Reserve ◽  
Chi Squared ◽  
Reserve Officer Training Corps ◽  
And Performance ◽  
Composite Scores ◽  
The Relationship ◽  
Training Corps

ABSTRACT Introduction The development of functional motor competence (FMC; i.e., neuromuscular coordination and control required to meet a wide range of movement goals) is critical to long-term development of health- and performance-related physical capacities (e.g., muscular strength and power, muscular endurance, and aerobic endurance). Secular decline in FMC among U.S. children and adolescents presents current and future challenges for recruiting prospective military personnel to successfully perform the physical demands of military duty. The purpose of the current study was to examine the relationship between FMC and physical military readiness (PMR) in a group of Cadets enrolled in an Army Reserve Officer Training Corps program. Materials and Methods Ninety Army Reserve Officer Training Corps Cadets from a southeastern university and a military college in the southeast (females = 22; Mage = 19.5 ± 2.5) volunteered for participation in the study. Cadets performed a battery of eight FMC assessments consisting of locomotor, object projection, and functional coordination tasks. To assess PMR, Cadets performed the Army Combat Fitness Test (ACFT). Values from all FMC assessments were standardized based on the sample and summed to create a composite FMC score. ACFT scores were assigned to Cadets based upon ACFT scoring standards. We used Pearson correlations to assess the relationships between individual FMC assessment raw scores, FMC composite scores, and total ACFT points. We also evaluated the potential impact of FMC on ACFT in the entire sample and within each gender subgroup using hierarchical linear regression. Finally, we implemented a 3 × 2 chi-squared analysis to evaluate the predictive utility of FMC level on pass/fail results on the ACFT by categorizing Cadets’ composite FMC score into high (≥75th percentile) moderate (≥25th percentile and &lt;75th percentile), and low (&lt;25th percentile) based on the percentile ranks within the sample. ACFT pass/fail results were determined using ACFT standards, requiring a minimum of 60 points on each the ACFT subtests. Results FMC composite scores correlated strongly with total ACFT performance (r = 0.762) with individual FMC tests demonstrating weak-to-strong relationships ACFT performance (r = 0.200–0.769). FMC uniquely accounted for 15% (95% CI: −0.07 to 0.36) of the variance in ACFT scores in females (R2 = 0.516, F2,19 = 10.11, P &lt; 0.001) and 26% (95% CI: 0.09–0.43) in males (R2 = 0.385, F2,65 = 20.37, P &lt; 0.001), respectively, above and beyond the impact of age. The 3 × 2 chi-squared analysis demonstrated 74% of those with low, 28% with moderate, and 17% with high FMC failed the ACFT (χ2 [1, N = 90] = 27.717, V = 0.555, P &lt; 0.001). Conclusion FMC composite scores are strongly correlated with ACFT scores, and low levels of FMC were a strong predictor of ACFT failure. These data support the hypothesis that the development of sufficient FMC in childhood and adolescence may be a critical antecedent for PMR. Efforts to improve FMC in children and adolescents may increase PMR of future military recruits.

Approximation of the Kinematics of Foot Joints by Using Passive Elastic Characteristics of Joint

2007 ◽  
Vol 342-343 ◽  
pp. 621-624
Author(s):  
Hyeon Ki Choi ◽  
Si Yeol Kim ◽  
Won Hak Cho
Keyword(s):  
Joint Angle ◽  
Reaction Force ◽  
Force Plate ◽  
Least Square Method ◽  
Least Square ◽  
Biomechanical Analysis ◽  
Clinical Evaluations ◽  
Foot Joints ◽  
The Relationship ◽  
Elastic Characteristics

We investigated the relationship between kinematic and kinetic characteristics of foot joints resisting ground reaction force (GRF). Passive elastic characteristics of joint were obtained from the experiment using three cameras and one force plate. The relationship between joint angle and moment was mathematically modeled by using least square method. The calculated ranges of motion were 7o for TM joint, 4o for TT joint and 20o for MP joint. With the model that relates joint angle and plantar pressure, we could get the kinematic data of the joints which are not available from conventional motion analysis. The model can be used not only for biomechanical analysis which simulates gait but also for the clinical evaluations.

Characteristics of Eight Irish Dance LandingsConsiderations for Training and Overuse Injury Prevention

2021 ◽  
Vol 25 (1) ◽  
pp. 30-37
Author(s):  
Sarah Klopp Christensen ◽  
Aaron Wayne Johnson ◽  
Natalie Van Wagoner ◽  
Taryn E. Corey ◽  
Matthew S. McClung ◽  
...  
Keyword(s):  
Large Range ◽  
Force Plate ◽  
Three Dimensional ◽  
The Body ◽  
Peak Force ◽  
Warm Up ◽  
Dance Training ◽  
Rise Rate ◽  
Dance Movements ◽  
Reaction Forces

Irish dance has evolved in aesthetics that lead to greater physical demands on dancers' bodies. Irish dancers must land from difficult moves without letting their knees bend or heels touch the ground, causing large forces to be absorbed by the body. The majority of injuries incurred by Irish dancers are due to overuse (79.6%). The purpose of this study was to determine loads on the body of female Irish dancers, including peak force, rise rate of force, and impulse, in eight common Irish hard shoe and soft shoe dance movements. It was hypothesized that these movements would produce different ground reac- tion force (GRF) characteristics. Sixteen female Irish dancers were recruited from the three highest competitive levels. Each performed a warm-up, reviewed the eight movements, and then performed each movement three times on a force plate, four in soft shoes and four in hard shoes. Ground reaction forces were measured using a three-dimensional force plate recording at 1,000 Hz. Peak force, rise rate, and vertical impulse were calculated. Peak forces normalized by each dancer's body weight for each of these variables were significantly different between move- ments and shoe types [F(15, 15)= 65.4, p < 0.01; F(15, 15) = 65.0, p < 0.01; and F(15, 15) = 67.4, p < 0.01, respectively]. The variable years of experience was not correlated with peak force, rise rate, or impulse (p > 0.40). It is concluded that there was a large range in GRF characteristics among the eight movements studied. Understanding the force of each dance step will allow instructors to develop training routines that help dancers adapt gradually to the high forces experienced in Irish dance training and competitions, thereby limiting the potential for overuse injuries.

Modification of the contact area of a standard force platform and runway for small breed dogs

2014 ◽  
Vol 27 (04) ◽  
pp. 257-262 ◽  
Author(s):  
J. Y. W. Kim ◽  
T. C. Garcia-Nolan ◽  
S. Y. Kim ◽  
K. Hayashi ◽  
P. L. Hitchens ◽  
...  
Keyword(s):  
Reaction Force ◽  
Force Plate ◽  
Force Platform ◽  
Standard Size ◽  
Plate Size ◽  
Propulsion Force ◽  
In Series ◽  
Reaction Forces ◽  
Wood Frame ◽  
Clinically Significant

SummaryObjectives: To develop a platform that used standard size force plates for large breed dogs to capture ground reaction force data from any size dog.Methods: A walkway platform was constructed to accommodate two force plates (60 cm x 40 cm) positioned in series to a variety of smaller sizes. It was constructed from a custom wood frame with thick aluminium sheet force plate covers that prevented transfer of load to the force plate, except for rectangular windows of three different dimensions. A friction study was performed to ensure plates did not translate relative to one another during gait trials. A prospective, observational, single crossover study design was used to compare the effect of force platform configuration (full plate size [original plate], half plate size [modified plate]) on ground reaction forces using eight adult healthy Labrador Retriever dogs.Results: Slippage of the steel plate on the force plate did not occur. Peak propulsion force was the only kinetic variable statistically different between the full size and half sized platforms. There were no clinically significant differences between the full and half force platforms for the variables and dogs studied.Discussion and conclusion: The modified force platform allows the original 60 x 40 cm force plate to be adjusted effectively to a 30 x 40 cm, 20 x 40 cm and 15 x 40 cm sized plate with no clinically significant change in kinetic variables. This modification that worked for large breed dogs will potentially allow kinetic analysis of a large variety of dogs with different stride lengths.

Ground reaction force and hoof deceleration patterns on two different surfaces at the trot

2006 ◽  
Vol 3 (4) ◽  
pp. 209-216 ◽  
Author(s):  
Pia Gustås ◽  
Christopher Johnston ◽  
Stig Drevemo
Keyword(s):  
Ground Reaction Force ◽  
Reaction Force ◽  
Force Plate ◽  
Ground Surface ◽  
Ground Reaction Forces ◽  
Triaxial Accelerometer ◽  
Loading Rates ◽  
Sand Surface ◽  
Reaction Forces ◽  
Force Data

AbstractThe objective of the present study was to compare the hoof deceleration and ground reaction forces following impact on two different surfaces. Seven unshod Standardbreds were trotted by hand at 3.0–5.7 m s− 1 over a force plate covered by either of the two surfaces, sandpaper or a 1 cm layer of sand. Impact deceleration data were recorded from one triaxial accelerometer mounted on the fore- and hind hooves, respectively. Ground reaction force data were obtained synchronously from a force plate, sampled at 4.8 kHz. The differences between the two surfaces were studied by analysing representative deceleration and force variables for individual horses. The maximum horizontal peak deceleration and the loading rates of the vertical and the horizontal forces were significantly higher on sandpaper compared with the sand surface (P < 0.001). In addition, the initial vertical deceleration was significantly higher on sandpaper in the forelimb (P < 0.001). In conclusion, it was shown that the different qualities of the ground surface result in differences in the hoof-braking pattern, which may be of great importance for the strength of the distal horse limb also at slow speeds.

Foot Strike and the Properties of the Human Heel Pad

1989 ◽  
Vol 203 (4) ◽  
pp. 191-196 ◽  
Author(s):  
R F Ker ◽  
M B Bennett ◽  
R McN Alexander ◽  
R C Kester
Keyword(s):  
Force Plate ◽  
Human Locomotion ◽  
Peak Force ◽  
Ground Contact ◽  
Substantial Portion ◽  
Heel Pad ◽  
Foot Strike ◽  
Compression Data ◽  
Rapid Deceleration ◽  
The Relationship

Many force-plate records of human locomotion show an impulse (the foot strike) shortly after ground contact. The authors' hypothesis is that this results from the rapid deceleration of a mass (the ‘effective foot’) under forces which compress the heel pad. The quantitative implications are investigated through an illustrative calculation. The observations used are (a) the peak force reached in foot strike (b) the vertical velocity of the foot immediately before ground contact and (c) the properties of the heel pad in compression. Data for (a) and (b) are available in the literature; measurements for (c) are presented here. The deductions are: (a) the time taken to reach peak force is about 5.4 ms, which agrees with published measurements; (b) the mass of the effective foot is about 3.6 kg. The effective foot thus includes a substantial portion of the leg: this seems reasonable. The models used for the calculations clarify the relationship between the foot strike and the shock wave, which it generates.

Sign in / Sign up

Export Citation Format

Share Document