scholarly journals Spatial Variation of Soil Moisture and its Effect on Lint Yield in a Deficit Irrigated Cotton Field

2017 ◽  
Author(s):  
Yujin Wen
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Management Practice ◽  
Lint Yield ◽  
Cotton Field ◽  
Spatial Correlations ◽  
Regulated Deficit Irrigation ◽  
Contour Map

ABSTRACTAs the population increases in Southwest Texas in recent years, the urban water demand is drastically increasing. Regulated deficit irrigation (RDI) is expected to be one of the potential water management practice for saving water while maintaining crop yield. A field experiment was conducted at the AgriLIFE Research center in Uvalde in summer 2008 to examine the water saving potential. Seven irrigation schemes and four varieties were assigned to the experimental field to test their effects on lint yield. As the spatial correlation of the soil moisture/ soil water content were suspected, a spatial analysis on lint yield and soil water content was conducted. The analysis results showed that: 1) The soil water contents showed spatial correlations, while the lint yield did not. 2) The relationship between lint yield and soil water content can be described by linear model better than spatial autocorrelation model. 3) The variogram fit of the soil water content showed a completed curve; the contour map generated using ordinary kriging illustrated the irrigation schemes effect well, and gradient effect was suspected. The variogram of the lint yield could not be fitted by a completed curve, which indicated that the sample field was not large enough to determine the variance function. Further study is needed to determine the slope effect on soil water content, and to improve the contour map precision of the lint yield.

Comparison of Sensor-Based and Weather-Based Irrigation Scheduling

2020 ◽  
Vol 36 (3) ◽  
pp. 375-386
Author(s):  
Ruixiu Sui ◽  
Earl D. Vories
Keyword(s):  
Soil Moisture ◽  
Water Balance ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Soil Texture ◽  
Irrigation Scheduling ◽  
Cotton Field ◽  
List Type ◽  
Soil Moisture Sensors

HighlightsSensor-based irrigation scheduling methods (SBISM) were compared with computerized water balance scheduling.Number and time of irrigation events scheduled using the SBISM were often different from those predicted by the computerized method.The highly variable soils at the Missouri site complicated interpretation of the sensor values.Both SBISM and computerized water balance scheduling could be used for irrigation scheduling with close attention to soil texture and effective rainfall or irrigation.Abstract. Sensor-based irrigation scheduling methods (SBISM) measure soil moisture to allow scheduling of irrigation events based on the soil-water status. With rapid development of soil moisture sensors, more producers have become interested in SBISM, but interpretation of the sensor data is often difficult. Computer-based methods attempt to estimate soil water content and the Arkansas Irrigation Scheduler (AIS) is one example of a weather-based irrigation scheduling tool that has been used in the Mid-South for many years. To aid producers and consultants interested in learning more about irrigation scheduling, field studies were conducted for two years in Mississippi and a year in Missouri to compare SBISM with the AIS. Soil moisture sensors (Decagon GS-1, Acclima TDR-315, Watermark 200SS) were installed in multiple locations of a soybean field (Mississippi) and cotton field (Missouri). Soil water contents of the fields were measured hourly at multiple depths during the growing seasons. The AIS was installed on a computer to estimate soil water content and the required data were obtained from nearby weather stations at both locations and manually entered in the program. In Mississippi, numbers and times of the irrigation events triggered by the SBISM were compared with those that would have been scheduled by the AIS. Results showed the number and time of irrigation events scheduled using the SBISM were often different from those predicted by the AIS, especially during the 2018 growing season. The highly variable soils at the Missouri site complicated the interpretation of the sensor values. While all of the sites were within the Tiptonville silt loam map unit, some of the measurements appeared to come from sandier soils. The AIS assumed more water entered the soil than the sensors indicated from both irrigations and rainfalls less than 25 mm. While the irrigation amounts were based on the pivot sprinkler chart, previous testing had confirmed the accuracy of the charts. Furthermore, the difference varied among sites, especially for rainfall large enough to cause runoff. The recommendations based on the Watermark sensors agreed fairly well with the AIS in July after the data from the sandiest site was omitted; however, the later irrigations called for by the AIS were not indicated by the sensors. Both the sensor-based irrigation scheduling method and the AIS could be used as tools for irrigation management in the Mid-South region, but with careful attention to soil texture and the effective portion of rainfall or irrigation. Keywords: Irrigation scheduling, Soil moisture sensor, Soil water content, Water management.

scholarly journals Relating surface backscatter response from TRMM Precipitation Radar to soil moisture: results over a semi-arid region

2009 ◽  
Vol 6 (5) ◽  
pp. 6425-6454
Author(s):  
H. Stephen ◽  
S. Ahmad ◽  
T. C. Piechota ◽  
C. Tang
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Arid Regions ◽  
Vegetation Index ◽  
Temporal Trends ◽  
Model Parameters ◽  
Precipitation Radar ◽  
Semi Arid

Abstract. The Tropical Rainfall Measuring Mission (TRMM) carries aboard the Precipitation Radar (TRMMPR) that measures the backscatter (σ°) of the surface. σ° is sensitive to surface soil moisture and vegetation conditions. Due to sparse vegetation in arid and semi-arid regions, TRMMPR σ° primarily depends on the soil water content. In this study we relate TRMMPR σ° measurements to soil water content (ms) in Lower Colorado River Basin (LCRB). σ° dependence on ms is studied for different vegetation greenness values determined through Normalized Difference Vegetation Index (NDVI). A new model of σ° that couples incidence angle, ms, and NDVI is used to derive parameters and retrieve soil water content. The calibration and validation of this model are performed using simulated and measured ms data. Simulated ms is estimated using Variable Infiltration Capacity (VIC) model whereas measured ms is acquired from ground measuring stations in Walnut Gulch Experimental Watershed (WGEW). σ° model is calibrated using VIC and WGEW ms data during 1998 and the calibrated model is used to derive ms during later years. The temporal trends of derived ms are consistent with VIC and WGEW ms data with correlation coefficient (R) of 0.89 and 0.74, respectively. Derived ms is also consistent with the measured precipitation data with R=0.76. The gridded VIC data is used to calibrate the model at each grid point in LCRB and spatial maps of the model parameters are prepared. The model parameters are spatially coherent with the general regional topography in LCRB. TRMMPR σ° derived soil moisture maps during May (dry) and August (wet) 1999 are spatially similar to VIC estimates with correlation 0.67 and 0.76, respectively. This research provides new insights into Ku-band σ° dependence on soil water content in the arid regions.

Root effects on soil water and hydraulic properties

Biologia ◽  
2007 ◽  
Vol 62 (5) ◽  
Author(s):  
Horst Gerke ◽  
Rolf Kuchenbuch
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Water Content ◽  
Bulk Density ◽  
Soil Water ◽  
Soil Water Content ◽  
Hydraulic Properties ◽  
Soil Hydraulic Properties ◽  
Soil Hydraulic ◽  
Root Effects

AbstractPlants can affect soil moisture and the soil hydraulic properties both directly by root water uptake and indirectly by modifying the soil structure. Furthermore, water in plant roots is mostly neglected when studying soil hydraulic properties. In this contribution, we analyze effects of the moisture content inside roots as compared to bulk soil moisture contents and speculate on implications of non-capillary-bound root water for determination of soil moisture and calibration of soil hydraulic properties.In a field crop of maize (Zea mays) of 75 cm row spacing, we sampled the total soil volumes of 0.7 m × 0.4 m and 0.3 m deep plots at the time of tasseling. For each of the 84 soil cubes of 10 cm edge length, root mass and length as well as moisture content and soil bulk density were determined. Roots were separated in 3 size classes for which a mean root porosity of 0.82 was obtained from the relation between root dry mass density and root bulk density using pycnometers. The spatially distributed fractions of root water contents were compared with those of the water in capillary pores of the soil matrix.Water inside roots was mostly below 2–5% of total soil water content; however, locally near the plant rows it was up to 20%. The results suggest that soil moisture in roots should be separately considered. Upon drying, the relation between the soil and root water may change towards water remaining in roots. Relations depend especially on soil water retention properties, growth stages, and root distributions. Gravimetric soil water content measurement could be misleading and TDR probes providing an integrated signal are difficult to interpret. Root effects should be more intensively studied for improved field soil water balance calculations.

Effect of water on common lambsquarters (Chenopodium album L.) and barnyardgrass [Echinochloa crus-galli (L.) Beauv.] seedling emergence in corn

2002 ◽  
Vol 82 (4) ◽  
pp. 855-859 ◽  
Author(s):  
M. L. Leblanc ◽  
D. C. Cloutier ◽  
C. Hamel
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Chenopodium Album ◽  
Seedling Emergence ◽  
Field Capacity ◽  
Emergence Period ◽  
Common Lambsquarters ◽  
Weed Emergence

A 2-year field study was conducted in corn to determine the influence of rainfall, irrigation and soil water content on common lambsquarters and barnyardgrass emergence. Rainfall or irrigation had no influence on the final weed density and little on the pattern of weed emergence because the soil water content was at or greater than field capacity during the main weed emergence period. Irrigation may hasten the first weed emergence by warming the soil when temperature is limiting for germination. In southwestern Quebec, temperature appears to be the most important factor regulating germination in the spring since soil moisture is normally at field capacity for a long period, in part because of the melting of snow. Key words: Irrigation, weed emergence, soil moisture

scholarly journals On the scaling characteristics of observed and simulated spatial soil moisture fields

2009 ◽  
Vol 16 (1) ◽  
pp. 141-150 ◽  
Author(s):  
M. Gebremichael ◽  
R. Rigon ◽  
G. Bertoldi ◽  
T. M. Over
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Spatial Correlation ◽  
Hydrologic Model ◽  
Invariance Property ◽  
Spatial Average ◽  
Hydrologic Models ◽  
Model Simulations

Abstract. By providing continuous high-resolution simulations of soil moisture fields, distributed hydrologic models could be powerful tools to advance the scientific community's understanding of the space-time variability and scaling characteristics of soil moisture fields. However, in order to use the soil moisture simulations from hydrologic models with confidence, it is important to understand whether the models are able to represent in a reliable way the processes regulating soil moisture variability. In this study, a comparison of the scaling characteristics of spatial soil moisture fields derived from a set of microwave radiometer observations from the Southern Great Plains 1997 experiment and corresponding simulations using the distributed hydrologic model GEOtop is performed through the use of generalized variograms. Microwave observations and model simulations are in agreement with respect to suggesting the existence of a scale-invariance property in the variograms of spatial soil moisture fields, and indicating that the scaling characteristics vary with changes in the spatial average soil water content. However, observations and simulations give contradictory results regarding the relationship between the scaling parameters (i.e. spatial organization) and average soil water content. The drying process increased the spatial correlation of the microwave observations at both short and long separation distances while increasing the rate of decay of correlation with distance. The effect of drying on the spatial correlation of the model simulations was more complex, depending on the storm and the simulation examined, but for the largest storm in the simulation most similar to the observations, drying increased the long-range correlation but decreased the short-range. This is an indication that model simulations, while reproducing correctly the total streamflow at the outlet of the watershed, may not accurately reproduce the runoff production mechanisms. Consideration of the scaling characteristics of spatial soil moisture fields can therefore serve as a more intensive means for validating distributed hydrologic models, compared to the traditional approach of only comparing the streamflow hydrographs.

scholarly journals Enhancing Soil Water Content for Increased Food Production in Semi-Arid Areas of Kenya Results From an On-Farm Trial in Mwala District, Kenya

2014 ◽  
Vol 6 (4) ◽  
pp. 125 ◽  
Author(s):  
Anne Karuma ◽  
Peter Mtakwa ◽  
Nyambilila Amuri ◽  
Charles K. Gachene ◽  
Patrick Gicheru
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Water Conservation ◽  
Crop Yields ◽  
Conservation Tillage ◽  
Cropping Systems ◽  
Soil Conditions ◽  
Tillage Methods

Soil water conservation through tillage is one of the appropriate ways of addressing soil moisture deficit in rainfed agriculture. This study evaluated the effects of tillage practices on soil moisture conservation and crop yields in Mwala District, Eastern Kenya during the long rains (LR) and short rains (SR) of 2012/13. Six tillage systems: Disc plough (MB), Disc plough and harrowing (MBH), Ox-ploughing (OX), Subsoiling – ripping (SR), Hand hoe and Tied Ridges (HTR) and Hand hoe only (H) and, three cropping systems namely, sole maize, sole bean and maize - bean intercrop, were investigated in a split-plot design with four replicates. Data on soil water content was monitored at different weeks after planting and the crop yields at end of each growing season. A three-season average shows that soil water content and crop yields were higher in conventional tillage methods compared to the conservation tillage methods. Long term tillage experiments are thus required at different locations, under various environmental and soil conditions to validate the study findings.

scholarly journals Soil Structure and Texture Effects on the Precision of Soil Water Content Measurements with a Capacitance- Based Electromagnetic Sensor

2020 ◽  
Vol 63 (1) ◽  
pp. 141-152
Author(s):  
Jasreman Singh ◽  
Derek M. Heeren ◽  
Daran R. Rudnick ◽  
Wayne E. Woldt ◽  
Geng Bai ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Sensor Calibration ◽  
Soil Water Depletion ◽  
Undisturbed Soil ◽  
Water Depletion ◽  
Soil Moisture Sensors ◽  
Electromagnetic Sensor

HighlightsCapacitance-based electromagnetic soil moisture sensors were tested in disturbed and undisturbed soils.The uncertainty in estimation of soil water depth was lower using the undisturbed soil sample calibrations.The uncertainty in estimation of soil water depletion was lower than the uncertainty in volumetric water content.Undisturbed calibration of water depletion quantifies water demand with better precision and avoids over-watering.Abstract. The physical properties of soil, such as structure and texture, can affect the performance of an electromagnetic sensor in measuring soil water content. Historically, calibrations have been performed on repacked samples in the laboratory and on soils in the field, but little research has been done on laboratory calibrations with intact (undisturbed) soil cores. In this study, three replications each of disturbed and undisturbed soil samples were collected from two soil texture classes (Yutan silty clay loam and Fillmore silt loam) at a field site in eastern Nebraska to investigate the effects of soil structure and texture on the precision of a METER Group GS-1 capacitance-based sensor calibration. In addition, GS-1 sensors were installed in the field near the soil collection sites at three depths (0.15, 0.46, and 0.76 m). The soil moisture sensor had higher precision in the undisturbed laboratory setup, as the undisturbed calibration had a better correlation [slope closer to one, R2undisturbed (0.89) > R2disturbed (0.73)] than the disturbed calibrations for the Yutan and Fillmore texture classes, and the root mean square difference using the laboratory calibration (RMSDL) was higher for pooled disturbed samples (0.053 m3 m-3) in comparison to pooled undisturbed samples (0.023 m3 m-3). The uncertainty in determination of volumetric water content (?v) was higher using the factory calibration (RMSDF) in comparison to the laboratory calibration (RMSDL) for the different soil structures and texture classes. In general, the uncertainty in estimation of soil water depth was greater than the uncertainty in estimation of soil water depletion by the sensors installed in the field, and the uncertainties in estimation of depth and depletion were lower using the calibration developed from the undisturbed soil samples. The undisturbed calibration of soil water depletion would determine water demand with better precision and potentially avoid over-watering, offering relief from water shortages. Further investigation of sensor calibration techniques is required to enhance the applicability of soil moisture sensors for efficient irrigation management. Keywords: Calibration, Capacitance, Depletion, Irrigation, Precision, Sensor, Soil water content, Structure, Uncertainty.

scholarly journals Application of Ground-Penetrating Radar and a Combined Penetrometer–Moisture Probe for Evaluating Spatial Distribution of Soil Moisture and Soil Hardness in Coastal and Inland Windbreaks

Geosciences ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 238
Author(s):  
Kenta Iwasaki ◽  
Makoto Tamura ◽  
Hirokazu Sato ◽  
Kazuhiko Masaka ◽  
Daisuke Oka ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Ground Penetrating Radar ◽  
Soil Compaction ◽  
Soil Moisture Condition ◽  
Soil Hardness ◽  
Ground Penetrating

The development of a method to easily investigate the spatial distribution of soil moisture and soil hardness in tree windbreaks is necessary because these windbreaks often decline due to inappropriate soil moisture condition and soil compaction. This research examined the applicability of ground-penetrating radar (GPR) and a combined penetrometer–moisture probe (CPMP) for evaluating the spatial distribution of soil moisture and soil hardness in four windbreaks with different soil characteristics. A GPR-reflecting interface was observed at a less permeable layer in a coastal windbreak and at a depth affected by soil compaction in an inland windbreak with andosol. The spatial distribution of the groundwater table could also be evaluated by examining the attenuation of GPR reflection in a coastal windbreak. In contrast, GPR was not applicable in an inland windbreak with peat because of high soil water content near the soil surface. The CPMP could detect vertical distributions of soil hardness and soil water content regardless of soil type. The CPMP was useful for interpreting GPR profiles, and GPR was useful for interpolating the information about the horizontal distribution of soil moisture and soil hardness between survey points made with the CPMP. Thus, the combination of GPR and a CPMP is ideal for examining the two-dimensional spatial distribution of soil moisture and soil hardness at windbreaks with soils for which both methods are applicable.

Hydrologic soil properties and application of a soil moisture model in a balsam fir forest

1988 ◽  
Vol 18 (4) ◽  
pp. 427-434 ◽  
Author(s):  
Richard Barry ◽  
André P. Plamondon ◽  
Jean Stein
Keyword(s):  
Soil Moisture ◽  
Soil Properties ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Crop Coefficient ◽  
Balsam Fir ◽  
Physical Parameters ◽  
Volumetric Soil Water Content ◽  
Soil Moisture Model

An analysis of hydrologic soil properties and the prediction of volumetric soil water content during four summers have been done for a site located in the balsam fir (Abiesbalsamea (L.) Mill.) forest of the Lac Laflamme watershed. The hydrologic properties were used to identify three different soil layers, THIRSTY, a soil moisture model using the Penman evapotranspiration formula, was applied to predict daily volumetric water content of these layers. Predictions of soil moisture with the calibrated model were close to the observed data for the median layer (20–60 cm from the soil surface) and less accurate for the surface layer (0–20 cm) where important transpiration activities take place. The model appeared unreliable for predicting soil water content of the bottom layer (60–100 cm) which was often saturated by groundwater. The calibration of the model required modifications of the observed values of the available water content at field capacity and the relative root density factor and was adjusted with the crop coefficient of the Penman evapotranspiration formula. These modifications of observed physical parameters raise the question of the feasibility of extrapolating the model to other sites without extensive calibration. The high sensitivity to variations of the crop coefficient applied to the evapotranspiration equation indicated that a more physically based transpiration model, supported by field-oriented process studies, would be required to improve the model's performance.

An assessment of soil moisture in the MARINE flash flood model using in situ measurements, reanalysis and satellite derived estimates

2020 ◽  
Author(s):  
Judith Eeckman ◽  
Hélène Roux ◽  
Bertrand Bonan ◽  
Clément Albergel ◽  
Audrey Douniot
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Model Calibration ◽  
Flash Flood ◽  
Soil Column ◽  
Subsurface Flow ◽  
Soil Layer ◽  
Observation Network

<p>The representation of soil moisture is a key factor for the simulation of flash flood in the Mediterranean region. The MARINE hydrological model is a distributed model dedicaded to flash flood simulation. Recent developments of the MARINE model lead to an improvement of the subsurface flow representation : on the one hand, the transfers through the subsurface take place in a homogeneous soil column based on the volumic soil water content instead of the water height. On the other hand, the soil column is divided into two layers, which represent respectively the upper soil layer and the deep weathered rocks. The aim of this work is to assess the performances of these new representations of the subsurface flow with respect to the soil saturation dynamics during flash flood events. The performances of the model are estimated with respect to three soil moisture products: i) the gridded soil moisture product provided by the LDAS-Monde assimilation chain. LDAS-Monde is based on the ISBA-a-gs land surface model and integrates high resolution spatial remote sensing data from the Copernicus Global Land Service for vegetation through data assimilation; ii) the upper soil moisture measurements taken from the SMOSMANIA observation network ; iii) The satellite derived surface soil moisture data from Sentinel1. The case study is led over two french mediterranean catchments impacted by flash flood events over the 2017-2019 period and where one SMOSMANIA station is available. Additionnal tests for the initialisation of MARINE water content for the two soil layers are assessed. Results show first that the dynamic of the soil moisture both provided by LDAS-Monde and simulated for the upper soil layer in MARINE are locally consistent with the SMOSMANIA observations. Secondly, the use of soil water content instead of water height to describe lateral flows in MARINE is cleary more relevant with respect to both LDAS-Monde simulations and SMOSMANIA stations. The dynamic of the deep layer moisture content also appears to be consistent with the LDAS-Monde product for deeper layers. However, the bias on these values strongly rely on the calibration of the new two-layers model. The opportunity of improving the two-layers model calibration is then discussed. Finally, the impact of the soil water content initialisation is shown to be significant mainly during the flood rising, and also to be dependent on the model calibration. In conclusion, the new developments presented for the representation of subsurface flow in the MARINE model appear to enhance the soil moisture simulation during flash floods, with respect to both the LDAS-Monde product and the SMOSMANIA observation network.</p>

Sign in / Sign up

Export Citation Format

Share Document