RFID monitoring system of fiber optic connectors

Circuit World ◽  
2017 ◽  
Vol 43 (1) ◽  
pp. 32-37 ◽  
Author(s):  
Bartlomiej Guzowski ◽  
Roman Gozdur ◽  
Mateusz Lakomski ◽  
Lukasz Bernacki
Keyword(s):  
Wireless Communication ◽  
Monitoring System ◽  
Power Supply ◽  
Design Methodology ◽  
Fiber Optic ◽  
Identification System ◽  
Power Method ◽  
Content Type ◽  
Identification Process ◽  
Alternative Power

Purpose The purpose of this paper is to develop identification system for fiber optic connectors in passive distribution cabinets. The system should have alternative power supply and wireless communication unlike the identification systems commercially available, which will make the system fully autonomous. Design/methodology/approach Detailed project and realization of real demonstrator of fully autonomous identification system. After the realization of the demonstrator, its optimization was performed. Findings It is possible to build fully autonomous identification system which requires 15.6 mJ energy to perform one cycle of identification process. Moreover, it is possible to use the alternative power method to supply this system. Originality/value Fully autonomous identification system of fiber optic connectors with alternative power supply and wireless communication.

Design of General Agricultural Wireless Monitoring System Based on ZigBee

2013 ◽  
Vol 380-384 ◽  
pp. 811-814
Author(s):  
Qi Guo Yao ◽  
Yu Liang Liu
Keyword(s):  
Wireless Communication ◽  
Low Power ◽  
Monitoring System ◽  
Communication Technology ◽  
Power Supply ◽  
Communication Protocol ◽  
Automatic Monitoring ◽  
Functional Modules ◽  
Wireless Monitoring ◽  
Design Concepts

The ZigBee which was adopted low-power wireless communication technology was used to design a multi-parameters monitoring system according to agricultural monitoring characteristics. Following the design concepts of generalization and modularization, the sensors and functional modules could be combined configuration, thus the system was versatility, flexible and convenient. Low-power communication protocol and solar charging technology were adopted to extend the life of power supply. This system could be widely used for automatic monitoring in facility agriculture and other agricultural places.

scholarly journals Autonomous fiber-optic gas monitoring system with thermoelectric power supply

2017 ◽  
Vol 4 (532) (4) ◽  
pp. 7
Author(s):  
Andrzej Nowrot ◽  
Krzysztof Kamil Żur ◽  
Anna Świderska-Środa ◽  
Monika Mikołajczyk ◽  
Witold Łojkowski
Keyword(s):  
Thermoelectric Power ◽  
Monitoring System ◽  
Power Supply ◽  
Fiber Optic ◽  
Gas Monitoring

scholarly journals Device for automation of hydrostatic leveling of man-made structures with alternative power supply

2021 ◽  
Vol 264 ◽  
pp. 04080
Author(s):  
Nematjon Zaxidov ◽  
Shoakbar Shoyusupov ◽  
Shahzod Rahmatillayev ◽  
Tulqin Jamolov ◽  
Doniyor Gafurov
Keyword(s):  
Energy Source ◽  
Comparative Analysis ◽  
Fiber Optics ◽  
Monitoring System ◽  
Power Supply ◽  
High Accuracy ◽  
Hydraulic Structures ◽  
Axis Of Rotation ◽  
Alternative Power ◽  
Vertical Deformations

The article discusses the issue of ensuring the reliability, durability, and safety of buildings and engineering, including hydraulic structures, by creating an automated hydrostatic leveling system with a device that uses fiber optics combined with an LED and a photodetector, installed on one hollow axis of rotation of the drum, like a sensor a ferromagnetic transducer was used for the displacement pulse, a comparative analysis of the existing means for measuring settlements and deformations of objects using laser and photoelectric means was carried out. A patented device has been developed that provides high accuracy, reliability, and the ability to create a monitoring system with remote information delivery with an autonomous energy source. The device can be used to install and assembly conveyor lines in determining the vertical deformations of dams, buildings, and structures during operation.

Business process orientation in the Slovenian power supply

2019 ◽  
Vol 25 (4) ◽  
pp. 780-798 ◽  
Author(s):  
Rajko Novak ◽  
Aleksander Janeš
Keyword(s):  
Business Process ◽  
Power Supply ◽  
Design Methodology ◽  
Business Process Management ◽  
Process Management ◽  
Empirical Investigation ◽  
Process Maturity ◽  
Process Orientation ◽  
Content Type ◽  
Practical Implications

PurposeThe purpose of this paper is to empirically evaluate business process orientation (BPO) of the Slovenian power supply business.Design/methodology/approachWithin the empirical investigation, the level of BPO maturity was measured in the 19 organizations of the power supply business. The survey was focused on the top, middle and lower managers. As a measuring instrument, a questionnaire for the extended concept of process orientation with nine elements was used.FindingsThe results of the BPO measurement show that, despite this long-standing preoccupation with processes, certified management system and the computerization of operations, process maturity is not high. Particularly the lowest score for information technology represents a surprise.Practical implicationsThis research makes significant contributions to the literature and above all to scholars and practitioners who work professionally in this field and will find useful guidance for a better understanding of applying BPO and maturity models.Social implicationsOne important reason for performing the maturity measurement in the power supply business is the importance of its activities for the operation and development and environmental impact of the whole of Slovenian society.Originality/valuePresented research is the first one which considers the BPO maturity in the Slovenian power supply business and therefore contributes to understanding of the “intangible factors” which have impact on the introduction of business process management and BPO.

The establishment and simulation of bidirectional Cockcroft-Walton circuit model

Circuit World ◽  
2017 ◽  
Vol 43 (4) ◽  
pp. 152-155
Author(s):  
Guozeng Wu ◽  
Quanlin Dong
Keyword(s):  
Numerical Calculation ◽  
High Voltage ◽  
Power Supply ◽  
Design Methodology ◽  
Simulation Analysis ◽  
Circuit Simulation ◽  
Analysis Model ◽  
Content Type ◽  
Dc Power ◽  
The Stability

Purpose The purpose of this paper is to improve the stability of high voltage DC power supply and reduce the ripple. Design/methodology/approach The study was conducted using the simulation analysis model and numerical calculation. Findings By increasing the output arm capacitance, the expression of ripple and times of the output arm capacitance and the auxiliary arm capacitance is derived. The output ripple is determined by the value of the output arm capacitance. Finally, the correctness of the method and the formula are verified using circuit simulation. Originality value This paper presents a method to improve the power supply stability.

Improved Litz wire manufacture process using resonant power converter-based induction heating

2017 ◽  
Vol 36 (2) ◽  
pp. 476-482 ◽  
Author(s):  
Alejandro Naval ◽  
Hector Sarnago ◽  
Ignacio Lope ◽  
Oscar Lucia ◽  
José M. Burdio
Keyword(s):  
Induction Heating ◽  
Power Supply ◽  
Manufacturing Process ◽  
High Frequency ◽  
High Performance ◽  
Design Methodology ◽  
Power Converter ◽  
Resonant Converter ◽  
Content Type ◽  
Manufacture Process

Purpose Litz wire manufacturing using mechanical procedures presents several limitations regarding reliability and repeatability, especially when a small strand diameter is used. This paper aims to propose a power supply design for Litz wire manufacturing using a high-frequency high-performance resonant converter. Design/methodology/approach This paper proposes the design of a resonant power supply for induction heating specially designed to tackle with the challenge of heating Litz wires quickly. Findings The proposed converter enables the removal of the isolating coating from the Litz wire through induction heating, improving significantly the manufacturing process. Originality/value The proposed converter improves significantly the manufacturing process of Litz wire through induction heating, with economic and reliability benefits.

Power line monitoring system using fiber optic power supply

2009 ◽  
Vol 16 (3) ◽  
pp. 257-261 ◽  
Author(s):  
Yosuke Tanaka ◽  
Tatsutoshi Shioda ◽  
Takashi Kurokawa ◽  
Junji Oka ◽  
Kazuyuki Ueta ◽  
...  
Keyword(s):  
Monitoring System ◽  
Power Supply ◽  
Fiber Optic ◽  
Power Line

The use of library software in Nigerian University Libraries and challenges

2014 ◽  
Vol 31 (3) ◽  
pp. 15-20 ◽  
Author(s):  
Kingdom Hudron Kari ◽  
Ebikabowei Emmanuel Baro
Keyword(s):  
Developing Countries ◽  
Power Supply ◽  
Design Methodology ◽  
Survey Method ◽  
University Libraries ◽  
Content Type ◽  
Skilled Manpower ◽  
Nigerian University ◽  
Descriptive Survey

Purpose – The study aimed to look at the library software in use in Nigerian university libraries, and the challenges and frustrations experienced in their automation projects. Design/methodology/approach – The study adopts a descriptive survey method and covers university libraries in Nigeria. A questionnaire was used to collect data from 32 university libraries in Nigeria. Findings – The study revealed that university libraries in Nigeria widely use library software such as KOHA, SLAM and VIRTUA for their library operations. Challenges such as lack of skilled manpower, lack of fund, absence of modern systems (computers) and erratic power supply were identified as the major problems university libraries in Nigeria encountered while using library software. Librarians recommended the use of KOHA, SLAM or VIRTUA library software for use by university libraries that are in search for library software to use. Originality/value – The findings of this study will provide useful information to librarians and library administrators in Nigeria and other developing countries who want to automate their library operations.

Nursing Movement Monitoring System Utilizing Hetero-core Fiber Optic Sensors Embedded in Medical Thin Films

2018 ◽  
Vol 138 (12) ◽  
pp. 525-532
Author(s):  
Masahiko Ito ◽  
Yuya Koyama ◽  
Michiko Nishiyama ◽  
Emi Yanagisawa ◽  
Mariko Hayashi ◽  
...  
Keyword(s):  
Thin Films ◽  
Monitoring System ◽  
Fiber Optic ◽  
Fiber Optic Sensors ◽  
Core Fiber ◽  
Movement Monitoring

scholarly journals Vulnerable adults in police custody

2019 ◽  
Vol 22 (1) ◽  
pp. 5-8
Author(s):  
Ian Cummins
Keyword(s):  
Design Methodology ◽  
Research Literature ◽  
Police Custody ◽  
England And Wales ◽  
Content Type ◽  
Increased Risk ◽  
Vulnerable Adults

Purpose The purpose of this paper is to discuss the recent National Appropriate Adult Network (NAAN) report on the role of the appropriate adult. Design/methodology/approach This paper is based on the NAAN report and a review of relevant policy and research literature. Findings There to Help 2 highlights that there are still significant gaps in the provision of appropriate adult schemes across England and Wales. These gaps potentially place vulnerable adults at increased risk. Originality/value This paper is a review of recent research.

Sign in / Sign up

Export Citation Format

Share Document