Investigation on thermal comfort of the uniform for workers in tropical monsoon climates

2020 ◽  
Vol 32 (6) ◽  
pp. 849-868
Author(s):  
Jingxian Xu ◽  
Huijuan Liu ◽  
Yunyi Wang ◽  
Jun Li
Keyword(s):  
Heat Transfer ◽  
Thermal Comfort ◽  
Dynamic Condition ◽  
Thermal Manikin ◽  
Content Type ◽  
Wind Speeds ◽  
Subjective Perceptions ◽  
Tropical Monsoon ◽  
Four Levels ◽  
Thermal Insulations

PurposeThis study aims to investigate the heat transfer mechanism of the uniforms used by people working in hot, humid and windy environments. Furthermore, the effectiveness of an opening structure added to the armpit of the uniforms in improving thermal comfort was comparatively examined.Design/methodology/approachA set of uniforms was tested with the opening at the armpit alternatively zipped or unzipped. Thermal manikin and human tests were performed in a climatic chamber simulating the specific environmental conditions, including wind speeds at four levels (0.15, 0.5, 2, 4 m/s) and relative humidities at two levels (50 and 85%). Static and dynamic thermal insulations of clothing (IT) were examined by the thermal manikin tests. The human bodies' thermal responses, including heart rates (HR), eardrum temperatures (Te), skin temperatures (Tsk) and subjective perceptions, were given by the human tests.FindingsSpecial mechanisms of heat transfer in the specific uniforms used in tropical monsoon climates were revealed. Reductions on IT were caused by the movement of the human body and the environmental wind, and the empirical equations would underestimate this reduction. The opening at the armpit was able to prompt more heat transfer under dynamic condition, with reducing the IT by 11.8%, lowering the mean Tsk by 0.92°C, and significantly improving the subjective perceptions (p < 0.05). The heat exhaustion was alleviated with lowering the Te by 0.32°C.Originality/valueThis study managed to improve the thermal performance of uniforms for workers under unforgiving conditions. The evaluation and design methods introduced by this study provided practical guidance for similar products with strict dress codes and cost control requirements based on the findings from thorough product tests and analysis.

Effects of hip protective clothing on thermal wear comfort of clothing ensembles

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Wiah Wardiningsih ◽  
Olga Troynikov
Keyword(s):  
Thermal Comfort ◽  
Thermal Insulation ◽  
Protective Clothing ◽  
Thermal Manikin ◽  
Content Type ◽  
Wear Comfort ◽  
Ensemble Performance ◽  
Clothing Style ◽  
Thermal Wear ◽  
Moisture Vapour

Purpose This paper aims to examine the influence of hip protective clothing on ensemble performance attributes related to thermal comfort. It also explores the effect on protective pads of various materials and the arrangements of material. The thermal comfort characteristics are thermal insulation and moisture vapour resistance. Design/methodology/approach For this research, four ensembles of clothing were used: one ensemble without hip protective clothing and three ensembles with hip protective clothing. A thermal manikin was used to test the thermal insulation and moisture vapour resistance of the ensembles. Findings The findings revealed that incorporating hip protective clothing into the clothing ensembles influenced the thermal resistance and moisture vapour resistance of the ensemble. In the “all zones group,” the influence of the hip protective clothing depended on clothing style, with hipster-style clothing producing insignificant changes. In the “hip zones group” and “stomach and hip zones group,” hip protective clothing strongly influenced the thermal comfort attributes of ensembles. Pad material and volume play important roles in these changes in thermal comfort attributes. Originality/value These outcomes are useful for the design and engineering of hip protective clothing, where maximizing protection while minimizing thermal and moisture vapour resistance is critical for wear comfort and adherence in warm or hot conditions. The designer should consider that material, volume and thickness of protective pad affect the overall thermal comfort attributes of the hip protective clothing.

Effects of wind direction on sportswear thermal insulation with various ease allowance

2016 ◽  
Vol 28 (4) ◽  
pp. 492-502 ◽  
Author(s):  
Shurong Hu ◽  
Mengmeng Zhao ◽  
Jun Li
Keyword(s):  
Surface Temperature ◽  
Thermal Comfort ◽  
Thermal Insulation ◽  
Wind Direction ◽  
Future Research ◽  
Thermal Manikin ◽  
Thermal Imager ◽  
Content Type ◽  
The Difference ◽  
Ease Allowance

Purpose – The purpose of this paper is to explore the effects of wind direction and ease allowance on thermal comfort in sportswear. Design/methodology/approach – The effects of wind direction (front, side, back and calm (no wind) 1.5 m/s) and seven magnitudes of ease allowance on sportswear thermal insulation and surface temperature were investigated. An 11 zones’ thermal manikin was used to acquire the static thermal insulation. Surface temperature was captured by a thermal imager. Findings – The results showed that the wind was a significant effect on thermal performance, however, wind direction effect was only significant in the segment covered with multilayer fabric, such as the abdomen and hip (p=0.034). Although the ease allowance influenced the overall thermal insulation obviously, the difference between seven sizes suits was not significant. Nevertheless, the ease allowance affected the surface temperature of chest and back significantly (p=0.023, 0.007). Correlation between thermal insulation and surface temperature was negative, and correlation level was degraded when affected by wind factor. Research limitations/implications – Sportswear’s fabric and style did not discussed as effect factors. It would be taken into accounted in the future research. Originality/value – Wind direction impact thermal comfort in multilayer regions significantly. It is a reference to improve sportswear’s comfort design.

The effects of using ceiling fans on human thermal comfort in a three-dimensional room with centralized heating including an occupant

2019 ◽  
Vol 29 (10) ◽  
pp. 3976-3993 ◽  
Author(s):  
Mahdi Ashoori ◽  
Ghanbarali Sheikhzadeh ◽  
Soroush Sadripour
Keyword(s):  
Heat Transfer ◽  
Thermal Comfort ◽  
Three Dimensional ◽  
Turbulence Models ◽  
Heating System ◽  
Considerable Effect ◽  
Content Type ◽  
Human Thermal Comfort ◽  
Air Speed ◽  
Comfort Condition

Purpose The purpose of this study is to analyze the effect of using a ceiling fan with central heating system in the winter on thermal comfort and heat transfer rate in a three-dimensional numerically. Design/methodology/approach The geometry had certain dimensions, and an occupant was modeled to be in the room. In models which were used, the flow was turbulent, and turbulence models were used for simulating turbulence. Between all the models, k-ε model had best matching. Findings Results show that using the ceiling fan during the winter had an efficient and considerable effect on improving the thermal comfort and energy saving inside buildings. By the use of ceiling fan, the effective room temperature has increased by 2.5°C. Furthermore, results show that by using ceiling fan in the winter, the predicted mean vote and the predicted percentage dissatisfied indexes improved. At the end, the case Room 11-0.05-15 with temperature of 87°C for radiator and normal fan velocity of o.25m/s were the optimal model that caused the complete thermal comfort and reduced energy consumption up to 28 per cent. Originality/value In the present study, the effects of using the ceiling fans on human comfort condition and heat transfer field during the winter (heating system) are studied. Following are the goals for all models: getting the appropriate temperature for radiator so that thermal comfort condition can be applied at the height of 75 cm of the room, velocity for fan so that air speed can be 0.25m/s at the height of 2 m or lower of the room and position to place the fan.

Thermal comfort performances of cellulosic socks evaluated by a foot manikin system and moisture management tester

2019 ◽  
Vol 31 (2) ◽  
pp. 272-283 ◽  
Author(s):  
Sibel Kaplan ◽  
Ceren Karaman
Keyword(s):  
Water Vapor ◽  
Thermal Resistance ◽  
Thermal Comfort ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Thermal Manikin ◽  
Content Type ◽  
Cellulosic Fibers ◽  
Moisture Management ◽  
Liquid Transfer

Purpose The purpose of this paper is to investigate thermal comfort performances of socks produced from cotton and regenerated cellulosic fiber yarns by thermal resistance (by a newly designed foot thermal manikin), moisture management tester (MMT) parameters and permeability (air and water vapor) tests. Design/methodology/approach Single jersey fabrics and socks were knitted from 30 Ne yarns produced from cotton, different regenerated cellulosic fibers (viscose, modal, bamboo, micromodal, Tencel®, Tencel LF®) and their blends. Thermal resistances of the socks were compared by a newly developed thermal foot manikin in a more realistic way than measurements in fabric form. Besides air and water vapor permeability, moisture management parameters of the fabrics were tested to differentiate performances of cellulosic fibers. Findings Results show that air permeability, liquid absorption and transfer parameters measured by MMT are generally identical and better for regenerated cellulosic fabrics than cotton. Micromodal and Tencel® have better performances for liquid transfer and overall moisture management capacities are superior for bamboo and Tencel LF®. Thermal resistances of the socks are minimum for Tencel LF® having a cross-linked structure and maximum for viscose socks. Originality/value It is thought that thermal resistance measured in socks form is more realistic than fabric measurements and results of this study that can be valid for all knitted garments. Moreover, comprehensive material plan of the study is valuable for getting reliable results for regenerated cellulosic fibers that have small differences in cases of thermal resistance and liquid transfer.

scholarly journals Influence of Masks Protecting against SARS-CoV-2 on Thermal Comfort

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3315
Author(s):  
Ewa Zender-Świercz ◽  
Marek Telejko ◽  
Beata Galiszewska
Keyword(s):  
Thermal Comfort ◽  
Public Spaces ◽  
Point Of View ◽  
The Other ◽  
Health Policies ◽  
Thermal Manikin ◽  
Public Health Policies ◽  
Protective Shield ◽  
Full Face ◽  
The Impact

Due to the spread of the SARS-CoV-2 virus, most countries have tightened their public health policies. One way to limit the spread of the virus is to make mouth and nose cover compulsory in public spaces. The article presents the impact of wearing masks on the perception of thermal comfort. The following masks were analysed: FFP2, cotton, medical, PM2.5, half-face protective shield plastic and full-face protective shield plastic. The research was carried out for two scenarios of an ambient temperature: −20 and 30 °C. A thermal manikin was used for the tests. In the case of when a temperature equals 20 °C, the dry masks increase comfort, both general and local, while wet masks reduce comfort. On the other hand, at 30 °C, only wet masks do not increase discomfort. In addition, moist masks require less heat flux to achieve a certain skin temperature. However, it should be remembered that it is not advisable to wet the masks from the health point of view.

Evaluation of compression-recovery and thermal characteristics of multilayer bedding textiles

2020 ◽  
Vol 32 (5) ◽  
pp. 631-643
Author(s):  
Sedat Özer ◽  
Yaşar Erayman Yüksel ◽  
Yasemin Korkmaz
Keyword(s):  
Thermal Conductivity ◽  
Sleep Quality ◽  
Thermal Comfort ◽  
Sleep Duration ◽  
Human Body ◽  
Design Methodology ◽  
Thermal Characteristics ◽  
Air Permeability ◽  
Content Type ◽  
Thermal Comfort Properties

PurposeDesign of bedding textiles that contact the human body affects the sleep quality. Bedding textiles contribute to comfort sense during the sleep duration, in addition to ambient and bed microclimate. The purpose of this study is to evaluate the effects of different layer properties on the compression recovery and thermal characteristics of multilayer bedding textiles.Design/methodology/approachIn this study, woven and knitted multilayer bedding textiles were manufactured from fabric, fiber, sponge and interlining, respectively. Different sponge thickness, fiber and interlining weight were used in the layers of samples. Later, the pilling resistance, compression and recovery, air permeability and thermal conductivity of multilayer bedding textiles were investigated.FindingsThe results indicated that samples with the higher layer weight and thickness provide better compression recovery and lower air permeability properties. It was also found that knitted surfaces show the higher air permeability than the woven surfaces depending on the fabric porosity. Layer properties have insignificant effect on the thermal conductivity values.Originality/valueWhile researchers mostly focus on thermal comfort properties of garments, there are limited studies about comfort properties of bedding textiles in the literature. Furthermore, compression recovery properties of bedding textiles have also a great importance in terms of comfort. Originality of this study is that these properties were analyzed together.

scholarly journals Heat transfer, physiological responses, and subjective perceptions during short contact time with wood or other materials

2021 ◽  
Vol 67 (1) ◽  
Author(s):  
Yuko Tsunetsugu ◽  
Masaki Sugiyama
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Blood Pressure ◽  
Physiological Stress ◽  
Physiological Responses ◽  
Chamaecyparis Obtusa ◽  
Material Interface ◽  
Japanese Cypress ◽  
Subjective Perceptions ◽  
Short Contact Time

AbstractThis study investigates the physiological responses and subjective perceptions of touching wood. In particular, it focuses on their respective relationships with the amount of heat transfer across the hand–material interface during contact. The study participants included 55 university students (20 females and 35 males) who gave written informed consent. The participants’ blood pressure, pulse rate, and cerebral blood hemoglobin concentrations were measured continuously for 90 s while they gently held vertical bar-shaped specimens of Japanese cypress (Chamaecyparis obtusa), Japanese oak (Quercus crispula), polyethylene, and aluminum. The specimens also included wood with a surface coating. We measured subjective warmth and comfort as well as the heat flux between the palm and the surface of the material. The wooden materials were rated as significantly warmer compared to aluminum and polyethylene, regardless of the wood species (cypress or oak) or its coating; this result corresponds with smaller heat transfers in the wooden materials. Additionally, the wooden materials were more comfortable to hold as compared to the aluminum bar. Based on the changes in blood pressure, touching Japanese cypress and uncoated Japanese oak were interpreted to induce less physiological stress. Therefore, we can conclude that wood, with lower thermal conductivity, feels warm, and it causes relatively smaller physiological changes compared to other materials with higher thermal conductivity. Thus, they may present less physiological burdens when touched.

Heat transfer enhancement using second mode self-oscillating structures

2019 ◽  
Vol 30 (7) ◽  
pp. 3827-3842
Author(s):  
Samer Ali ◽  
Zein Alabidin Shami ◽  
Ali Badran ◽  
Charbel Habchi
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Laminar Flow ◽  
Flow Regime ◽  
Vortex Generator ◽  
Reynolds Numbers ◽  
Content Type ◽  
Laminar Flow Regime ◽  
Second Mode

Purpose In this paper, self-sustained second mode oscillations of flexible vortex generator (FVG) are produced to enhance the heat transfer in two-dimensional laminar flow regime. The purpose of this study is to determine the critical Reynolds number at which FVG becomes more efficient than rigid vortex generators (RVGs). Design/methodology/approach Ten cases were studied with different Reynolds numbers varying from 200 to 2,000. The Nusselt number and friction coefficients of the FVG cases are compared to those of RVG and empty channel at the same Reynolds numbers. Findings For Reynolds numbers higher than 800, the FVG oscillates in the second mode causing a significant increase in the velocity gradients generating unsteady coherent flow structures. The highest performance was obtained at the maximum Reynolds number for which the global Nusselt number is improved by 35.3 and 41.4 per cent with respect to empty channel and rigid configuration, respectively. Moreover, the thermal enhancement factor corresponding to FVG is 72 per cent higher than that of RVG. Practical implications The results obtained here can help in the design of novel multifunctional heat exchangers/reactors by using flexible tabs and inserts instead of rigid ones. Originality/value The originality of this paper is the use of second mode oscillations of FVG to enhance heat transfer in laminar flow regime.

Sign in / Sign up

Export Citation Format

Share Document