Flexural bearing capacity of RC hollow slab beam strengthened by steel plates of different thicknesses

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Long Liu ◽  
Lifeng Wang ◽  
Ziwang Xiao
Keyword(s):  
Finite Element ◽  
Bearing Capacity ◽  
Steel Plate ◽  
Plate Thickness ◽  
Research Field ◽  
Steel Plates ◽  
Nonlinear Material ◽  
Finite Element Models ◽  
Content Type ◽  
Flexural Bearing Capacity

PurposeThe flexural reinforcement of bridges in-service has been an important research field for a long time. Anchoring steel plate at the bottom of beam is a simple and effective method to improve its bearing capacity. The purpose of this paper is to explore the influence of anchoring steel plates of different thicknesses on the bearing capacity of hollow slab beam and to judge its working status.Design/methodology/approachFirst, static load experiments are carried out on two in-service RC hollow slab beams; meanwhile, nonlinear finite element models are built to study the bearing capacity of them. The nonlinear material and shear slip effect of studs are considered in the models. Second, the finite element models are verified, and the numerical simulation results are in good agreement with the experimental results. Finally, the finite element models are adopted to carry out the research on the influence of different steel plate thicknesses on the flexural bearing capacity and ductility.FindingsWhen steel plates of different thicknesses are adopted to reinforce RC hollow slab beams, the bearing capacity increases with the increase of the steel plate thickness in a certain range. But when the steel plate thickness reaches a certain level, bearing capacity is no longer influenced. The displacement ductility coefficient decreases with the increase of steel plate thickness.Originality/valueBased on experimental study, this paper makes an extrapolation analysis of the bearing capacity of hollow slab beams reinforced with steel plates of different thicknesses through finite element simulation and discusses the influence on ductility. This method not only ensures the accuracy of bearing capacity evaluation but also does not need many samples, which is economical to a certain extent. The research results provide a basis for the reinforcement design of similar bridges.

Comparison of flexural capacity of different hollow slab beams with/without pavement layer reinforced by steel plates

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Long Liu ◽  
Lifeng Wang ◽  
Ziwang Xiao
Keyword(s):  
Finite Element ◽  
Bearing Capacity ◽  
Steel Plate ◽  
Plate Thickness ◽  
Experimental Results ◽  
Nonlinear Material ◽  
Finite Element Models ◽  
Rc Beams ◽  
Flexural Capacity ◽  
Content Type

PurposeReinforcement of reinforced concrete (RC) beams in-service have always been an important research field, anchoring steel plate in the bottom of the beams is a kind of common reinforcement methods. In actual engineering, the contribution of pavement layer to the bearing capacity of RC beams is often ignored, which underestimates the bearing capacity and stiffness of RC beams to a certain extent. The purpose of this paper is to study the effect of pavement layer on the RC beams before and after reinforcement.Design/methodology/approachFirst, static load experiments are carried out on three in-service RC hollow slab beams, meanwhile, nonlinear finite element models are built to study the bearing capacity of them. The nonlinear material and shear slip effect of studs are considered in the models. Second, the finite element models are verified, and the numerical simulation results are in good agreement with the experimental results. Last, the finite element models are adopted to carry out the research on the influence of different steel plate thicknesses on the flexural bearing capacity and ductility.FindingsThe experimental results showed that pavement layers increase the flexural capacity of hollow slab beams by 16.7%, and contribute to increasing stiffness. Ductility ratio of SPRCB3 and PRCB2 was 30% and 24% lower than that of RCB1, respectively. The results showed that when the steel plate thickness was 1 mm–6 mm, the bearing capacity of the hollow slab beam increased gradually from 2158.0 kN.m to 2656.6 kN.m. As the steel plate thickness continuously increased to 8 mm, the ultimate bearing capacity increased to 2681.0 kN.m. The increased thickness did not cause difference to the bearing capacity, because of concrete crushing at the upper edge.Originality/valueIn this paper, based on the experimental study, the bearing capacity of hollow beam strengthened by steel plate with different thickness is extrapolated by finite element simulation, and its influence on ductility is discussed. This method not only guarantees the accuracy of the bearing capacity evaluation, but also does not require a large number of samples, and has certain economy. The research results provide a basis for the reinforcement design of similar bridges.

REINFORCEMENT OF AGEING SHIP STRUCTURES

2021 ◽  
Vol 160 (A3) ◽  
Author(s):  
D Chichì ◽  
Y Garbatov
Keyword(s):  
Monte Carlo Simulation ◽  
Finite Element ◽  
Ultimate Strength ◽  
Steel Plate ◽  
Plate Thickness ◽  
Compressive Load ◽  
Finite Element Models ◽  
Uniform Corrosion ◽  
Finite Element Analyses ◽  
Longitudinal Stiffeners

The objective of the present study is to investigate the possibility to recover the ultimate strength of a rectangular steel plate with a manhole shape opening subjected to a uniaxial compressive load and non-uniform corrosion degradation reinforced by additional stiffeners. Finite element analyses have been carried out to verify the possible design solutions. A total of four finite element models are generated, including 63 sub-structured models. The non-uniform corrosion has been generated by the Monte Carlo simulation. The reinforcement process covers three scenarios that include mounting of two longitudinal stiffeners, two longitudinal and two transverse stiffeners and the flange on the opening. The positioning of the stiffeners has also been studied. A total of 10 cases has been selected and tested for the numerical experiment. Three different assessments have been performed to evaluate the ultimate strength, weight and cost. Two additional studies on the effect of the plate thickness and slenderness have been also carried out.

Parametric Study of Hysteretic Behaviour of Combined Welded Heavy Steel Plates with Accumulative Damage

2011 ◽  
Vol 194-196 ◽  
pp. 1887-1891
Author(s):  
Na Yang ◽  
Jing Jing Zhang ◽  
Ting Guo
Keyword(s):  
Finite Element ◽  
Energy Dissipation ◽  
Plastic Strain ◽  
Steel Plate ◽  
Plate Thickness ◽  
Damage Model ◽  
Thickness Ratio ◽  
Steel Plates ◽  
Hysteretic Behavior ◽  
Previous Researcher

The accumulative damage model in which the material’s plastic strain is defined as variable and the energy dissipation is also considered is applied to the combined welded heavy steel plates. And the reliability of the model is confirmed by comparing the computed results in finite element project ABAQUS to tested results from previous researcher. On that basis, a series of steel plate components are computed to analyze their hysteretic curves and ductility factors. The influences of steel plate thickness, web’s height-thickness ratio and flange’s width-thickness ratio on hysteretic behavior are studied.

scholarly journals Compression Performance of Newly Designed Replaceable Tubular Steel Piers

2020 ◽  
Vol 2020 ◽  
pp. 1-19
Author(s):  
Haifeng Li ◽  
Xuehang Zhao ◽  
Wei Sun ◽  
Zhe Xiong
Keyword(s):  
Bearing Capacity ◽  
Steel Plate ◽  
Plate Thickness ◽  
Local Buckling ◽  
Steel Plates ◽  
Steel Bridge ◽  
Seismic Behaviour ◽  
Compression Performance ◽  
Type Iii ◽  
Bridge Column

To rapidly restore the seismic behaviour of a portal steel bridge column after an earthquake, the installation of replaceable tubular steel piers at the root of a portal steel bridge column is proposed herein. In this study, various tubular steel piers with different structural measures were designed; an axial compression test and a numerical simulation of the newly designed tubular steel piers were performed. The effects of parameters such as the structure of stiffening rib, the strength of LYP steel plate, the size of low-yield-point (LYP) steel plate, and the size of outer constrained steel plate were discussed. The results indicate that local buckling of steel tubular plates is likely to occur at the upper or lower end of those specimens, which belong to type II-A specimens with stiffened LYP steel tubular plates or type III-A specimens with T-shaped LYP steel plates, respectively. This led to the LYP steel plate cannot fully display its function. For type III-B and III-C specimens with embedded LYP steel plates and constrained steel plates on both sides, when the outer steel tubular plates buckle, the internally constrained LYP steel plates provide support for the outer steel tubular plates. The plastic deformation of the specimens is sufficient, and the deformation performance is good. For type IV-A specimens with LYP steel tubular plates and constrained steel plates on both sides, the mechanical behaviour of the new tubular steel piers is significantly improved, and increasing the height of the constrained LYP steel tubular plate can improve the compressive behaviour of the new tubular steel pier. Considering the effect of the steel plate thickness on bearing capacity and deformation performance, the thickness tw of the outer constrained steel plate should be equal to the thickness t of the common steel tubular plate, and the thickness tf of the LYP steel tubular plate should satisfy t ≤ tf ≤ 2t. Finally, a design formula is proposed to calculate the axial bearing capacity of newly designed tubular steel piers with constrained LYP steel plates.

Reinforcement of Ageing Ship Structures

2018 ◽  
Vol Vol 160 (A3) ◽  
Author(s):  
D Chichì ◽  
Y Garbatov
Keyword(s):  
Monte Carlo Simulation ◽  
Finite Element ◽  
Ultimate Strength ◽  
Steel Plate ◽  
Plate Thickness ◽  
Compressive Load ◽  
Finite Element Models ◽  
Uniform Corrosion ◽  
Finite Element Analyses ◽  
Longitudinal Stiffeners

The objective of the present study is to investigate the possibility to recover the ultimate strength of a rectangular steel plate with a manhole shape opening subjected to a uniaxial compressive load and non-uniform corrosion degradation reinforced by additional stiffeners. Finite element analyses have been carried out to verify the possible design solutions. A total of four finite element models are generated, including 63 sub-structured models. The non-uniform corrosion has been generated by the Monte Carlo simulation. The reinforcement process covers three scenarios that include mounting of two longitudinal stiffeners, two longitudinal and two transverse stiffeners and the flange on the opening. The positioning of the stiffeners has also been studied. A total of 10 cases has been selected and tested for the numerical experiment. Three different assessments have been performed to evaluate the ultimate strength, weight and cost. Two additional studies on the effect of the plate thickness and slenderness have been also carried out.

Computational predictions for predicting the performance of steel 1 panel shear wall under explosive loads

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Aydin Shishegaran ◽  
Behnam Karami ◽  
Elham Safari Danalou ◽  
Hesam Varaee ◽  
Timon Rabczuk
Keyword(s):  
Steel Plate ◽  
Plate Thickness ◽  
Ensemble Model ◽  
Maximum Deflection ◽  
Explosive Load ◽  
Statistical Parameters ◽  
Content Type ◽  
A Value ◽  
Error Terms ◽  
Better Than

Purpose The resistance of steel plate shear walls (SPSW) under explosive loads is evaluated using nonlinear FE analysis and surrogate methods. This study uses the conventional weapons effect program (CONWEP) model for the explosive load and the Johnson-Cook model for the steel plate. Based on the Taguchi method, 25 samples out of 100 samples are selected for a parametric study where we predict the damaged zones and the maximum deflection of SPSWs under explosive loads. Then, this study uses a multiple linear regression (MLR), multiple Ln equation regression (MLnER), gene expression programming (GEP), adaptive network-based fuzzy inference (ANFIS) and an ensemble model to predict the maximum detection of SPSWs. Several statistical parameters and error terms are used to evaluate the accuracy of the different surrogate models. The results show that the cross-section in the y-direction and the plate thickness have the most significant effects on the maximum deflection of SPSWs. The results also show that the maximum deflection is related to the scaled distance, i.e. for a value of 0.383. The ensemble model performs better than all other models for predicting the maximum deflection of SPSWs under explosive loads. Design/methodology/approach The SPSW under explosive loads is evaluated using nonlinear FE analysis and surrogate methods. This study uses the CONWEP model for the explosive load and the Johnson-Cook model for the steel plate. Based on the Taguchi method, 25 samples out of 100 samples are selected for a parametric study where we predict the damaged zones and the maximum deflection of SPSWs under explosive loads. Then, this study uses a MLR, MLnER, GEP, ANFIS and an ensemble model to predict the maximum detection of SPSWs. Several statistical parameters and error terms are used to evaluate the accuracy of the different surrogate models. The results show that the cross-section in the y-direction and the plate thickness have the most significant effects on the maximum deflection of SPSWs. The results also show that the maximum deflection is related to the scaled distance, i.e. for a value of 0.383. The ensemble model performs better than all other models for predicting the maximum deflection of SPSWs under explosive loads. Findings The resistance of SPSW under explosive loads is evaluated using nonlinear FE analysis and surrogate methods. This study uses the CONWEP model for the explosive load and the Johnson-Cook model for the steel plate. Based on the Taguchi method, 25 samples out of 100 samples are selected for a parametric study where we predict the damaged zones and the maximum deflection of SPSWs under explosive loads. Then, this study uses a MLR, MLnER, GEP, ANFIS and an ensemble model to predict the maximum detection of SPSWs. Several statistical parameters and error terms are used to evaluate the accuracy of the different surrogate models. The results show that the cross-section in the y-direction and the plate thickness have the most significant effects on the maximum deflection of SPSWs. The results also show that the maximum deflection is related to the scaled distance, i.e. for a value of 0.383. The ensemble model performs better than all other models for predicting the maximum deflection of SPSWs under explosive loads. Originality/value The resistance of SPSW under explosive loads is evaluated using nonlinear FE analysis and surrogate methods. This study uses the CONWEP model for the explosive load and the Johnson-Cook model for the steel plate. Based on the Taguchi method, 25 samples out of 100 samples are selected for a parametric study where we predict the damaged zones and the maximum deflection of SPSWs under explosive loads. Then, this study uses a MLR, MLnER, GEP, ANFIS and an ensemble model to predict the maximum detection of SPSWs. Several statistical parameters and error terms are used to evaluate the accuracy of the different surrogate models. The results show that the cross-section in the y-direction and the plate thickness have the most significant effects on the maximum deflection of SPSWs. The results also show that the maximum deflection is related to the scaled distance, i.e. for a value of 0.383. The ensemble model performs better than all other models for predicting the maximum deflection of SPSWs under explosive loads.

Research on mechanical behavior of L-shaped multi-cell concrete-filled steel tubular stub columns under axial compression

2018 ◽  
Vol 22 (2) ◽  
pp. 427-443 ◽  
Author(s):  
Jiepeng Liu ◽  
Hua Song ◽  
Yuanlong Yang
Keyword(s):  
Finite Element ◽  
Compressive Strength ◽  
Bearing Capacity ◽  
Thickness Ratio ◽  
Steel Plates ◽  
Test Results ◽  
Finite Element Program ◽  
Element Program ◽  
Compressive Strength Of Concrete ◽  
Stub Columns

A total of 11 L-shaped multi-cell concrete-filled steel tubular stub columns were fabricated and researched in axial compression test. The key factors of width-to-thickness ratio D/ t of steel plates in column limb and prism compressive strength of concrete fck were investigated to obtain influence on failure mode, bearing capacity, and ductility of the specimens. The test results show that the constraint effect for concrete provided by multi-cell steel tube cannot be ignored. The ductility decreases with the increase of width-to-thickness ratio D/ t of steel plates in column limb. The bearing capacity increases and the ductility decreases with the increase in prism compressive strength of concrete fck. A finite element program to calculate concentric load–displacement curves of L-shaped multi-cell concrete-filled steel tubular stub columns was proposed and verified by the test results. A parametric analysis with the finite element program was carried out to study the influence of the steel ratio α, steel yield strength fy, prism compressive strength of concrete fck, and width-to-thickness ratio D/ t of steel plates in column limb on the stiffness, bearing capacity and ductility. Furthermore, the design method of bearing capacity was determined based on mainstream concrete-filled steel tubular codes.

scholarly journals Steel Plate Cold-Rolled Section Steel Embedded High-Strength Concrete Low-Rise Shear Wall Seismic Performance

2018 ◽  
Vol 2018 ◽  
pp. 1-18
Author(s):  
Min Gan ◽  
Yu Yu ◽  
Liren Li ◽  
Xisheng Lu
Keyword(s):  
Bearing Capacity ◽  
Failure Mode ◽  
Seismic Performance ◽  
High Strength Concrete ◽  
Steel Plate ◽  
Shear Walls ◽  
High Strength ◽  
Shear Wall ◽  
Steel Plates ◽  
Strength Concrete

Four test pieces with different steel plate center-to-center distances and reinforcement ratios are subjected to low-cycle repeat quasistatic loading to optimize properties as failure mode, hysteretic curve, skeleton curve, energy dissipation parameters, strength parameters, and seismic performance of high-strength concrete low-rise shear walls. The embedded steel plates are shown to effectively restrict wall crack propagation, enhance the overall steel ratio, and improve the failure mode of the wall while reducing the degree of brittle failure. Under the same conditions, increasing the spacing between the steel plates in the steel plate concrete shear wall can effectively preserve the horizontal bearing capacity of the shear wall under an ultimate load. The embedded steel plates perform better than concealed bracing in delaying stiffness degeneration in the low-rise shear walls, thus safeguarding their long-term bearing capacity. The results presented here may provide a workable basis for shear wall design optimization.

Analysis on Flexural Bearing Capacity and Ductility of NHC Pile

2013 ◽  
Vol 427-429 ◽  
pp. 94-98
Author(s):  
Tie Cheng Wang ◽  
Wei Kai Wang ◽  
Hai Long Zhao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bearing Capacity ◽  
Flexural Behavior ◽  
Element Analysis ◽  
Displacement Ductility ◽  
Flexural Bearing Capacity ◽  
Ductility Ratio

The flexural behavior of non-holomorphic circular pile and cylindrical pile is respectively evaluated based on the results of finite element analysis with ABAQUS. It is presented that the ultimate bearing capacities of non-holomorphic circular pile and cylindrical pile have little difference. The displacement ductility ratio of non-holomorphic circular pile lies between 3.38 and 3.64, indicating that the NHC pile has better ductility.

scholarly journals An Experimental and Numerical Study on the Flexural Performance of Over-Reinforced Concrete Beam Strengthening with Bolted-Compression Steel Plates: Part II

2019 ◽  
Vol 10 (1) ◽  
pp. 94 ◽  
Author(s):  
Shatha Alasadi ◽  
Zainah Ibrahim ◽  
Payam Shafigh ◽  
Ahad Javanmardi ◽  
Karim Nouri
Keyword(s):  
Failure Modes ◽  
Steel Plate ◽  
Numerical Study ◽  
Load Capacity ◽  
Plate Thickness ◽  
Steel Plates ◽  
Experimental Program ◽  
Failure Characteristics ◽  
Control Beam ◽  
Concrete Failure

This study presents an experimental investigation and finite element modelling (FEM) of the behavior of over-reinforced simply-supported beams developed under compression with a bolt-compression steel plate (BCSP) system. This study aims to avoid brittle failure in the compression zone by improving the strength, strain, and energy absorption (EA) of the over-reinforced beam. The experimental program consists of a control beam (CB) and three BCSP beams. With a fixed steel plate length of 1100 mm, the thicknesses of the steel plates vary at the top section. The adopted plate thicknesses were 6 mm, 10 mm, and 15 mm, denoted as BCSP-6, BCSP-10, and BCSP-15, respectively. The bolt arrangement was used to implement the bonding behavior between the concrete and the steel plate when casting. These plates were tested under flexural-static loading (four-point bending). The load-deflection and EA of the beams were determined experimentally. It was observed that the load capacity of the BCSP beams was improved by an increase in plate thickness. The increase in load capacity ranged from 73.7% to 149% of the load capacity of the control beam. The EA was improved up to about 247.5% in comparison with the control beam. There was also an improvement in the crack patterns and failure modes. It was concluded that the developed system has a great effect on the parameters studied. Moreover, the prediction of the concrete failure characteristics by the FE models, using the ABAQUS software package, was comparable with the values determined via the experimental procedures. Hence, the FE models were proven to accurately predict the concrete failure characteristics.

Sign in / Sign up

Export Citation Format

Share Document