Numerical analysis of water-lubricated thrust bearing with groove texture considering turbulence and cavitation

2018 ◽  
Vol 70 (6) ◽  
pp. 1127-1136 ◽  
Author(s):  
Huihui Feng ◽  
Liping Peng
Keyword(s):  
Friction Force ◽  
Surface Texture ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Groove Width ◽  
Content Type ◽  
Cavitation Effect ◽  
Rotary Speed ◽  
Groove Texture ◽  
Laminar Model

Purpose This paper aims to establish the mathematical models for the water-lubricated thrust bearing with groove texture considering turbulence and cavitation and numerically analyze the influence of rotary speed, texture depth, groove number and groove width on the static performance of the bearing. Design/methodology/approach The turbulent Reynolds equation and the Jakobsson–Floberg–Olsson cavitation model are adopted for the analysis. The Payvar–Salant algorithm and Finite difference schemes are used to discretize the governing equations. To illustrate the influence of turbulence, the performance of the bearing predicted by the turbulent and laminar models are compared. Findings According to the results, the load capacity and the friction force calculated by the turbulent model are greater than those obtained by laminar model, and the deviation between them gradually increases with the increased rotary speed. So, the turbulent effect should be fully considered for high-speed water-lubricated bearing with surface texture. There exists a peak value for the load capacity of the water-lubricated thrust bearing in respect to the texture depth, the number of grooves and the groove width ratio, while the friction force varies slowly with those parameters. Well-designed groove texture can improve the performance of the water-lubricated thrust bearing. Originality/value This paper proposes a mathematical model considering turbulent and cavitation effect for water-lubricated thrust bearing with surface texture. This model can be complementary to conventional laminar model which is used to analyze the performance of textured bearing at low rotary speed.

A numerical method to investigate the mixed lubrication performances of journal-thrust coupled bearings

2019 ◽  
Vol 71 (9) ◽  
pp. 1099-1107
Author(s):  
Guo Xiang Guo Xiang ◽  
Yanfeng Han ◽  
Renxiang Chen ◽  
Jiaxu Wang Jiaxu Wang ◽  
Ni Xiaokang
Keyword(s):  
Thrust Bearing ◽  
Load Capacity ◽  
Elastohydrodynamic Lubrication ◽  
Hydrodynamic Pressure ◽  
Mixed Lubrication ◽  
Hydrodynamic Effect ◽  
Asperity Contact ◽  
Content Type ◽  
Lubrication Regime ◽  
Coupled Effect

Purpose This paper aims to present a numerical model to investigate the mixed lubrication performances of journal-thrust coupled bearings (or coupled bearings). Design/methodology/approach The coupled hydrodynamic effect (or coupled effect) between the journal and the thrust bearing is considered by ensuring the continuity of the hydrodynamic pressure and the flow field at the common boundary. The mixed lubrication performances of the coupled bearing are comparatively studied for the cases of considering and not considering coupled effect. Findings The simulated results show that the hydrodynamic pressure distributions for both the journal and thrust bearing are modified due to the coupled effect. The decreased load capacity of the journal bearing and the increased load capacity of the thrust bearing can be observed when the coupled effect is considered. And the coupled effect can facilitate in reducing the asperity contact load for both the journal and thrust bearing. Additionally, the interaction between the mixed lubrication behaviors, especially for the friction coefficient, of the journal and the thrust bearing is significant in the elastohydrodynamic lubrication regime, while it becomes weak in the mixed lubrication regime. Originality/value The developed model can reveal the mutual effects of the mixed lubrication behavior between the journal and the thrust bearing.

scholarly journals Effect of groove texture on the dynamic characteristics of water-lubricated thrust bearing

2018 ◽  
Vol 213 ◽  
pp. 01003
Author(s):  
Huihui Feng ◽  
Liping Peng
Keyword(s):  
Dynamic Characteristics ◽  
Reynolds Equation ◽  
Thrust Bearing ◽  
Water Film ◽  
Geometrical Parameters ◽  
Damping Coefficients ◽  
Rotary Speed ◽  
Stiffness And Damping ◽  
Groove Texture ◽  
Film Lubrication

In this study, the effects of groove texture on the dynamic characteristics of water-lubricated thrust bearing are theoretically investigated. The turbulent Reynolds equation and its perturbation equations for water-film lubrication are derived and solved by using finite difference method. Dynamic characteristics including the stiffness and damping coefficients of the bearing are calculated. The effects of rotary speed, film clearance and geometrical parameters including groove texture depth and circumferential angle on the dynamic characteristics of the bearing have been investigated.

Leakage-free optimization of micro herringbone grooved journal bearings with a virtual node method

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Lei Yin ◽  
Xiaolin Zheng ◽  
Dongxing Tang ◽  
Yanfeng Han ◽  
Rui Zhao ◽  
...  
Keyword(s):  
Friction Force ◽  
Numerical Algorithm ◽  
Design Methodology ◽  
Load Capacity ◽  
Groove Depth ◽  
Journal Bearings ◽  
Virtual Node ◽  
Content Type ◽  
Leakage Model ◽  
Critical Nodes

Purpose This study aims to develop a new method to treat the numerical singularity at the critical nodes of two skew coordinates, and optimize the leakage of micro herringbone grooved journal bearings (MHGJBs) with this method. Design/methodology/approach A side leakage numerical algorithm is proposed by using the skew meshes with a virtual node (SMVN) method to evaluate the effects of groove angle, bank/groove ratio, groove depth and groove number on load capacity, friction and side leakage of MHGJB. Findings The SMVN method is effective in treating the numerical singularity at the critical nodes of two skew coordinates. Besides, a group of optimized parameters of micro herringbone groove is obtained which can not only minimize the side leakage but also improve the load capacity and friction force. Originality/value A virtual node method was proposed, which can significantly improve the calculation accuracy in the side leakage model.

Experimental study on load capacity of nanoparticles-laden gas film in thrust bearing

2015 ◽  
Vol 67 (3) ◽  
pp. 233-239 ◽  
Author(s):  
Zhiru Yang ◽  
Dongfeng Diao ◽  
Hongyan Fan ◽  
Xue Fan ◽  
Chao Wang
Keyword(s):  
Film Thickness ◽  
Thrust Bearing ◽  
Volume Fraction ◽  
Load Capacity ◽  
Displacement Sensor ◽  
Enhancement Effect ◽  
Total Load ◽  
Film Pressure ◽  
Content Type ◽  
Nanoparticles Volume Fraction

Purpose – The purpose of this paper is to study the load capacity of nanoparticles-laden gas film (NLGF) in thrust bearing. Design/methodology/approach – SiO2 nanoparticles were added into gas to form an NLGF. The nanoparticles volume fraction in the film was controlled by a vibrator. The film thickness and the film pressure were measured by a micro cantilever displacement sensor and a membrane pressure sensor, respectively. The total load that makes the film thickness keeping constant was quantified, and then, the film load capacity was obtained. Findings – The investigation shows that nanoparticles can enlarge the film load capacity remarkably; even a little amount of nanoparticles (0.01 per cent) could lead to a sharp rise. With the increase of nanoparticles volume fraction, load capacity increases. However, the increment of load capacity decreases gradually. In addition, the film pressure variation proves the enhancement effect of nanoparticles on the film load capacity. Research limitations/implications – The paper is restricted to the findings based on NLGF, which is formed by dispersing SiO2 nanoparticles in gas film as an additive. The experimental results are applicable within the range of nanoparticles volume fraction of 0.01-0.33 per cent. Originality/value – The fact that nanoparticles could enlarge the gas film load capacity is verified by experiment for the first time. This study reveals the corresponding relation between nanoparticles volume fraction and the film load capacity.

Simulation and experiment on pressure field characteristics of hydrostatic hydrodynamic hybrid thrust bearings

2019 ◽  
Vol 71 (1) ◽  
pp. 102-108 ◽  
Author(s):  
Jun-peng Shao ◽  
Guang-dong Liu ◽  
Xiaodong Yu
Keyword(s):  
Bearing Capacity ◽  
Thrust Bearing ◽  
Pressure Field ◽  
Dynamic Pressure ◽  
Film Pressure ◽  
Content Type ◽  
Oil Film ◽  
Pressure Fields ◽  
Rotary Speed ◽  
Oil Film Pressure

PurposeThis paper aims to improve the bearing capacity of hydrostatic thrust bearing under working conditions of high speed and heavy load; a new wedge-shaped structure opened on an edge of oil seal is put forward, the loss and insufficiency for hydrostatic bearing capacity are made up by using dynamic pressure, and then, hydrostatic hydrodynamic lubrication is realized.Design/methodology/approachOil film three-dimensional models of unidirectional and bi-directional hydrostatic hydrodynamic oil pad are established by using UG. The oil film pressure fields of two kinds of oil pad are simulated by using ANSYS ICEM CFD and ANSYS CFX; the pressure fields distribution characteristics are obtained, and the effects of workbench rotary speed and bearing weight on pressure field are analyzed. Also, the experimental verification is made.FindingsThe results demonstrate that with an increase in workbench rotary speed, the oil film pressure of two kinds of hybrid oil pad increases gradually, and the maximum pressure of the bi-directional one accounts for 95 per cent of the unidirectional one when the load is constant. With an increase in load, the oil film pressure of two kinds of hybrid oil pad increases gradually, the difference between them is 9.4 per cent under the condition of load of 25twhen the rotary speed is constant.Originality/valueThe paper can provide theoretical basis for a structure design of hybrid thrust bearing under different rotary speed and load conditions, and compensate the shortage of static pressure-bearing capacity by using dynamic pressure, improve the stability of vertical CNC machining equipment.

A novel technique for modeling friction behavior in knitted fabric simulation

2017 ◽  
Vol 29 (6) ◽  
pp. 776-792
Author(s):  
Vajiha Mozafary ◽  
Pedram Payvandy
Keyword(s):  
Friction Coefficient ◽  
Uniform Distribution ◽  
Friction Force ◽  
Experimental Result ◽  
Knitted Fabric ◽  
Friction Behavior ◽  
Content Type ◽  
Novel Technique ◽  
Fabric Structure ◽  
Fabric Surface

Purpose Fabric-object friction force is a fundamental factor in cloth simulation. A large number of parameters influence the frictional properties of fabrics such as fabric structure, yarn structure, and inherent properties of component fibers. The purpose of this paper is to propose a novel technique for modeling fabric-object friction force in knitted fabric simulation based on the mass spring model. Design/methodology/approach In this technique, unlike other studies, distribution of friction coefficient over the fabric surface is not uniform and depends on the fabric structure. The main reason for considering non-uniform distribution is that in various segments of fabric, contact percent of fabric-object is different. Findings The proposed technique and common methods based on friction coefficient uniform distribution are used to simulate the frictional behavior of knitted fabrics. The results show that simulation error values for proposed technique and common methods are 2.7 and 9.4 percent as compared with the experimental result, respectively. Originality/value In the existing methods of the friction force modeling, the friction coefficient of fabric is assumed uniform. But this assumption is not correct because fabric does not have an isotropic structure. Thus in this study, the friction coefficient distribution is considered based on fabric structure to achieve more of realistic simulations.

Numerical and experimental studies on the thermal and static characteristics of multi-leaf foil thrust bearing

2021 ◽  
pp. 135065012110110
Author(s):  
Yu Guo ◽  
Yu Hou ◽  
Qi Zhao ◽  
Xionghao Ren ◽  
Shuangtao Chen ◽  
...  
Keyword(s):  
High Speed ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Failure Process ◽  
Experimental Studies ◽  
Elastic Model ◽  
Static Characteristics ◽  
Bearing Load ◽  
Foil Thrust Bearing ◽  
Cooling Air

Foil bearing is considered to be a promising supporting technology in high-speed centrifugal machinery. Due to the high-speed shearing effect in the viscous lubricant film, heat generation could not be ignored. In this paper, a thermo-elastic model of the multi-leaf foil thrust bearing is proposed to predict its thermal and static characteristics. In the model, modified Reynolds equation, energy equation, and Kirchhoff equation are solved in a coupling way. The contact area between the foil and welding plate is taken into account. Besides, the effect of cooling air on the bearing temperature is investigated. The ultimate load capacity and transient overload failure process of the bearing is analyzed and discussed. The effect of rotation speed on the bearing temperature is more obvious than that of the bearing load. The bearing temperature drops obviously by introducing the cooling air, and the cooling effect is improved with the supply pressure. The transient overload failure of the bearing occurs when the bearing load exceeds the ultimate value.

Investigation of slip/no-slip surface for two-dimensional large tilting pad thrust bearing

2017 ◽  
Vol 69 (6) ◽  
pp. 995-1004 ◽  
Author(s):  
Zhixiang Song ◽  
Fei Guo ◽  
Ying Liu ◽  
Songtao Hu ◽  
Xiangfeng Liu ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Slip Surface ◽  
Load Capacity ◽  
Slip Condition ◽  
Optimized Design ◽  
Two Dimensional ◽  
Boundary Slip ◽  
Content Type ◽  
Tilting Pad ◽  
Turbulence Effect

Purpose This paper aims to present the slip/no-slip design in two-dimensional water-lubricated tilting pad thrust bearings (TPTBs) considering the turbulence effect and shifting of pressure centers. Design/methodology/approach A numerical model is established to analyze the slip condition and the effect of turbulence according to a Reynolds number defined in terms of the slip condition. Simulations are carried out for eccentrically and centrally pivoted bearings and the influence of different slip parameters is discussed. Findings A considerable enhancement in load capacity, as well as a reduction in friction, can be achieved by heterogeneous slip/no-slip surface designs for lubricated sliding contacts, especially for near parallel pad configurations. The optimized design largely depends on the pivot position. The load capacity increases by 174 per cent for eccentrically pivoted bearings and 159 per cent for centrally pivoted bearings for a suitable design. When slip zone locates at the middle of the radial direction or close to the inner edge, the performance of the TPTB is better. Research limitations/implications The simplification of slip effect on the turbulence (definition of Reynolds number) can only describe the trend of the increasing turbulence due to slip condition. The accurate turbulence expression considering the boundary slip needs further explorations. Originality/value The shifting of pressure center due to the slip/no-slip design for TPTBs is investigated in this study. The turbulence effect and influence of slip parameters is discussed for large water-lubricated bearings.

An Accurate Solution of the Gas Lubricated, Flat Sector Thrust Bearing

1977 ◽  
Vol 99 (1) ◽  
pp. 82-88 ◽  
Author(s):  
I. Etsion ◽  
D. P. Fleming
Keyword(s):  
Film Thickness ◽  
Thrust Bearing ◽  
Load Capacity ◽  
Thickness Distribution ◽  
Maximum Load ◽  
Accurate Solution ◽  
Operating Conditions ◽  
Thrust Bearings ◽  
Practical Design ◽  
Minimum Film Thickness

A flat sector shaped pad geometry for gas lubricated thrust bearings is analyzed considering both pitch and roll angles of the pad and the true film thickness distribution. Maximum load capacity is achieved when the pad is tilted so as to create a uniform minimum film thickness along the pad trailing edge. Performance characteristics for various geometries and operating conditions of gas thrust bearings are presented in the form of design curves. A comparison is made with the rectangular slider approximation. It is found that this approximation is unsafe for practical design, since it always overestimates load capacity.

Effect of recess depth on lubrication performance of annular recess hydrostatic thrust bearing by constant rate flow

2018 ◽  
Vol 70 (1) ◽  
pp. 68-75 ◽  
Author(s):  
Jun-peng Shao ◽  
Guang-dong Liu ◽  
Xiao-dong Yu ◽  
Yan-qin Zhang ◽  
Xiu-li Meng ◽  
...  
Keyword(s):  
Thrust Bearing ◽  
Simulation Method ◽  
Content Type ◽  
Oil Film ◽  
Constant Rate ◽  
Lubrication Performance ◽  
Optimal Value ◽  
Improved Performance ◽  
Lubrication Characteristics ◽  
Volume Method

Purpose The purpose of this paper is to describe a simulation and experimental research concerning the effect of recess depth on the lubrication performance of a hydrostatic thrust bearing by constant rate flow. Design/methodology/approach The computational fluid dynamics and finite volume method have been used to compute the lubrication characteristics of an annular recess hydrostatic thrust bearing with different recess depths. The performances are oil recess pressure, oil recess temperature and oil film velocity. The recess depth has been optimized. A test rig is established for testing the pressure field of the structure of hydrostatic thrust bearing after recess depth optimization, and experimental results show that experimental data are basically identical with the simulation results, which demonstrates the validity of the proposed numerical simulation method. Findings The results demonstrate that the oil film temperature decreases and the oil film pressure first increases and then decreases with an increase in the recess depth, but oil film velocity is constant. To sum up comprehensive lubrication performance, the recess depth of 3.5 mm is its optimal value for the annular recess hydrostatic thrust bearing. Originality/value The computed results indicate that to get an improved performance from a constant flow hydrostatic thrust bearing, a proper selection of the recess depth is essential.

Sign in / Sign up

Export Citation Format

Share Document