scholarly journals Reconstituting historical stratigraphy: Ugarit’s Temple of Dagan

2019 ◽  
Vol 9 (4) ◽  
pp. 468-485
Author(s):  
Tarek Teba ◽  
Dimitris Theodossopoulos
Keyword(s):  
Bronze Age ◽  
Architectural Design ◽  
Public Understanding ◽  
Conservation Strategy ◽  
Content Type ◽  
Architectural Analysis ◽  
Architectural Development ◽  
A Site ◽  
The Temple

Purpose The purpose of this paper is to test critical conservation approaches through conceptual architectural interventions that integrate the evolution of a significant urban building, the Temple of Dagan in Ugarit, the capital of an important Bronze Age civilisation in Syria, with the pre-existing phases of the site and offer a paradigm for the presentation of the city’s evolution. This reflection aims to investigate how far the remaining fabric can frame the original architectural experience of the place allowing the visitors of the ruins to contextualise the architectural development of the temple. Design/methodology/approach A detailed reading of archaeological reports and the French mission’s architectural interpretation as well as in situ surveys and architectural and urban analyses were carried out to inform this conservation reflection, which primarily explores the potential of critical conservation approaches for key architectural interventions. The main vehicle is a virtual reconstruction approach to probe the proposed critical conservation principles and their success in highlighting the stratigraphy of a site. Findings The work shows that critical conservation approaches can make a distinct contribution to the understanding of the ruins; in particular, the virtual approach can handle effectively the presentation of the intangible experience of the temple (original processional routes) and its archaeological stratigraphy. Research limitations/implications The poor condition of the temple, being exposed for more than 80 years after excavation, have limited further architectural analysis as some evidence is confusing to read in situ. The pre-conservation analysis, therefore, was based more on the archaeological mission’s work, which is comprehensive. Social implications The reconstitution of the temple’s architectural layers in a coherent narrative will have educational value as it will highlight the development of architectural perception and techniques during the Bronze Age. Debate on the application of such tools by managers of the site may enhance the visitors’ appreciation of the ruins. The digital output itself constitutes an engaging material that enhances the public understanding of the site and its rich stratigraphy. Originality/value The study is the first attempt to constitute an architectural experience out of the confusing ruins integrating the archaeological evidence in the frame of contemporary conservation and architectural design. As one of the predominant urban artefacts in Ugarit, the Temple of Dagan witnessed at least a millennium of the city’s history and thus the conservation strategy of its intense development and stratification reflects the whole city.

Het onzichtbare Olympia

Lampas ◽  
2021 ◽  
Vol 54 (2) ◽  
pp. 213-229
Author(s):  
Vladimir Stissi
Keyword(s):  
Bronze Age ◽  
Early History ◽  
Content Type ◽  
Main Structure ◽  
The Past ◽  
History Of ◽  
The Common ◽  
New Research ◽  
The Temple ◽  
Large Dam

Abstract Although ancient Olympia is usually viewed as a Classical Greek site, most buildings that are visible nowadays were not there yet when Pindar celebrated famous victors or Peisistratos and Alcibiades won their races. More generally, even though new research has substantially improved our knowledge, the early history of the site is often still neglected in introductory presentations of the site. In this article some important main issues are discussed. First, new excavations have revealed that Bronze Age occupation of the area cannot be connected to the later cult, as some scholars have argued in the past. The older remains were covered by flooding of the nearby rivers when the sanctuary was founded in the 11th century BCE. Up to the late 7th century the sanctuary remained an open area around a large ash altar. Its main structure was a large dam protecting it from floods. The temple now associated with Hera, built around 600 BCE, was the first monumental building of the sanctuary. Recent research suggests this may originally have been dedicated to Zeus, but this cannot be proven conclusively. The common idea that this temple was originally a wooden construction has now also been debunked.

LOCATION BASED DATA REPRESENTATION THROUGH AUGMENTED REALITY IN ARCHITECTURAL DESIGN

2018 ◽  
Vol 12 (3) ◽  
pp. 228
Author(s):  
Faruk Can Ünal ◽  
Yüksel Demir
Keyword(s):  
Augmented Reality ◽  
Architectural Design ◽  
Data Representation ◽  
Design Activity ◽  
Survey Paper ◽  
Augmented Reality System ◽  
Site Survey ◽  
Augmented Reality Technology ◽  
A Site

Architects conduct site visits prior to a design activity to understand existing conditions. If the architect’s position and orientation are known on site, and augmented reality system has access to a location based content database of the site, then augmented reality system can display the content in 3D directly upon the architect’s view. Generally, architects use augmented reality as a visualization tool for presentation. It is also possible to collect data of a site and represent it in situ for architectural design. This paper is a survey of location based data representation in augmented reality systems to use in early stages of architectural design related to site. Initially, it describes the field of augmented reality including the characteristics and requirements. Then it surveys the state of the art by reviewing featured applications of location based augmented reality technology. Developments to the recent conditions from the first implementations have been revealed with components. At the same time, this paper aims to find common links between these featured applications and architectural site survey. Thus, it discusses opportunities of augmented reality to provide the needs of an architect as a site visit. However, it suggests which augmented reality components are more suitable in recent conditions for use in architectural design related to site. As a survey paper, it focuses on how location based augmented reality can be used in architectural design instead of presenting a model or an application.

scholarly journals Development of Fragility Curves for Piping and Slope Stability of River Levees

Water ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 738
Author(s):  
Nicola Rossi ◽  
Mario Bačić ◽  
Meho Saša Kovačević ◽  
Lovorka Librić
Keyword(s):  
Slope Stability ◽  
Fragility Curves ◽  
Safety Margin ◽  
Water Levels ◽  
Flood Event ◽  
Soil Parameters ◽  
Design Code ◽  
A Site ◽  
Insight Into

The design code Eurocode 7 relies on semi-probabilistic calculation procedures, through utilization of the soil parameters obtained by in situ and laboratory tests, or by the means of transformation models. To reach a prescribed safety margin, the inherent soil parameter variability is accounted for through the application of partial factors to either soil parameters directly or to the resistance. However, considering several sources of geotechnical uncertainty, including the inherent soil variability, measurement error and transformation uncertainty, full probabilistic analyses should be implemented to directly consider the site-specific variability. This paper presents the procedure of developing fragility curves for levee slope stability and piping as failure mechanisms that lead to larger breaches, where a direct influence of the flood event intensity on the probability of failure is calculated. A range of fragility curve sets is presented, considering the variability of levee material properties and varying durations of the flood event, thus providing crucial insight into the vulnerability of the levee exposed to rising water levels. The procedure is applied to the River Drava levee, a site which has shown a continuous trend of increased water levels in recent years.

“The cut and thrust of industrial relations” – bullying by another name?

2018 ◽  
Vol 33 (1) ◽  
pp. 2-13 ◽  
Author(s):  
Pat Drake
Keyword(s):  
Women Leaders ◽  
Industrial Relations ◽  
Illustrative Case ◽  
University Leadership ◽  
Public Identity ◽  
Content Type ◽  
Female Self ◽  
Emotional Work ◽  
Differences Of Opinion ◽  
A Site

Purpose The purpose of this paper is to offer a feminography, that is a “narration of a female self in a feminist age” (Abrams, 2017) by presenting a conceptual analysis, derived from experience, of email providing a form of discourse – that the author calls finger-speak – through which unexamined gender positioning caricatures a person’s identity. In so doing, the paper provides an illustrative case of a female manager being positioned through email to “know her place, perform it and feel it” (Hey, 2011). Design/methodology/approach An analysis of email foregrounds “finger-speak” as a form of digital conversation and through which people in universities may be positioned publicly but without their consent in relation to unexamined norms and assumptions. For women, it is argued, these norms are ageist and sexist. In this paper, fragments of finger-speak are collated to provide a reading of how mixing gendered norms with apparent differences of opinion constructs, via unexamined sexism, a public identity and then undermines it. Findings Through the case presented, the author argues that, because of a shared but unarticulated shadow over women as leaders, email lays the ground for subsequent scapegoating in such a manner that the woman takes responsibility for structural challenges that rightly belong to the organisation. Originality/value The contribution that email makes to constructing female identity in public is new, complementing other work that publicly characterises women leaders, through film (Ezzedeen, 2015), and through published writing such as autobiography (Kapasi et al., 2016). Emotional work undertaken by women in university leadership is so far under-represented in public, and email is a site through which this work becomes visible.

Pituitary adenoma producing growth hormone and adrenocorticotropin: a histological, immunocytochemical, electron microscopic, and in situ hybridization study

1998 ◽  
Vol 88 (6) ◽  
pp. 1111-1115 ◽  
Author(s):  
Kalman Kovacs ◽  
Eva Horvath ◽  
Lucia Stefaneanu ◽  
Juan Bilbao ◽  
William Singer ◽  
...  
Keyword(s):  
Growth Hormone ◽  
In Situ Hybridization ◽  
Pituitary Adenoma ◽  
Immunoelectron Microscopy ◽  
Secretory Granules ◽  
Cell Types ◽  
Content Type ◽  
Separate Cell ◽  
Fine Print

✓ The authors report on the morphological features of a pituitary adenoma that produced growth hormone (GH) and adrenocorticotropic hormone (ACTH). This hormone combination produced by a single adenoma is extremely rare; a review of the available literature showed that only one previous case has been published. The tumor, which was removed from a 62-year-old man with acromegaly, was studied by histological and immunocytochemical analyses, transmission electron microscopy, immunoelectron microscopy, and in situ hybridization. When the authors used light microscopy, the tumor appeared to be a bimorphous mixed pituitary adenoma composed of two separate cell types: one cell population synthesized GH and the other ACTH. The cytogenesis of pituitary adenomas that produce more than one hormone is obscure. It may be that two separate cells—one somatotroph and one corticotroph—transformed into neoplastic cells, or that the adenoma arose in a common stem cell that differentiated into two separate cell types. In this case immunoelectron microscopy conclusively demonstrated ACTH in the secretory granules of several somatotrophs. This was associated with a change in the morphological characteristics of secretory granules. Thus it is possible that the tumor was originally a somatotropic adenoma that began to produce ACTH as a result of mutations that occurred during tumor progression.

scholarly journals Competition between Metals for Binding to Methanobactin Enables Expression of Soluble Methane Monooxygenase in the Presence of Copper

2014 ◽  
Vol 81 (3) ◽  
pp. 1024-1031 ◽  
Author(s):  
Bhagyalakshmi Kalidass ◽  
Muhammad Farhan Ul-Haque ◽  
Bipin S. Baral ◽  
Alan A. DiSpirito ◽  
Jeremy D. Semrau
Keyword(s):  
Methane Monooxygenase ◽  
High Specificity ◽  
Copper Uptake ◽  
Content Type ◽  
Soluble Methane Monooxygenase ◽  
Sds Page ◽  
Genes Encoding ◽  
Key Factor ◽  
Membrane Bound

ABSTRACTIt is well known that copper is a key factor regulating expression of the two forms of methane monooxygenase found in proteobacterial methanotrophs. Of these forms, the cytoplasmic, or soluble, methane monooxygenase (sMMO) is expressed only at low copper concentrations. The membrane-bound, or particulate, methane monooxygenase (pMMO) is constitutively expressed with respect to copper, and such expression increases with increasing copper. Recent findings have shown that copper uptake is mediated by a modified polypeptide, or chalkophore, termed methanobactin. Although methanobactin has high specificity for copper, it can bind other metals, e.g., gold. Here we show that inMethylosinus trichosporiumOB3b, sMMO is expressed and active in the presence of copper if gold is also simultaneously present. Such expression appears to be due to gold binding to methanobactin produced byM. trichosporiumOB3b, thereby limiting copper uptake. Such expression and activity, however, was significantly reduced if methanobactin preloaded with copper was also added. Further, quantitative reverse transcriptase PCR (RT-qPCR) of transcripts of genes encoding polypeptides of both forms of MMO and SDS-PAGE results indicate that both sMMO and pMMO can be expressed when copper and gold are present, as gold effectively competes with copper for binding to methanobactin. Such findings suggest that under certain geochemical conditions, both forms of MMO may be expressed and activein situ. Finally, these findings also suggest strategies whereby field sites can be manipulated to enhance sMMO expression, i.e., through the addition of a metal that can compete with copper for binding to methanobactin.

scholarly journals Specificity of Associations between Bacteria and the Coral Pocillopora meandrina during Early Development

2012 ◽  
Vol 78 (20) ◽  
pp. 7467-7475 ◽  
Author(s):  
Amy Apprill ◽  
Heather Q. Marlow ◽  
Mark Q. Martindale ◽  
Michael S. Rappé
Keyword(s):  
Small Subunit ◽  
Rrna Genes ◽  
Polymorphism Analysis ◽  
Roseobacter Clade ◽  
Small Subunit Rrna ◽  
Content Type ◽  
Sterile Seawater ◽  
Show Evidence ◽  
Coral Health

ABSTRACTRelationships between corals and specific bacterial associates are thought to play an important role in coral health. In this study, the specificity of bacteria associating with the coralPocillopora meandrinawas investigated by exposing coral embryos to various strains of cultured marine bacteria, sterile seawater, or raw seawater and examining the identity, density, and location of incorporated cells. The isolates utilized in this experiment included members of the Roseobacter and SAR11 clades of theAlphaproteobacteria, aPseudoalteromonasspecies of theGammaproteobacteria, and aSynechococcusspecies of theCyanobacteriaphylum. Based on terminal restriction fragment length polymorphism analysis of small-subunit rRNA genes, similarities in bacterial communities associated with 170-h-old planulae were observed regardless of treatment, suggesting that bacteria may have been externally associated from the outset of the experiment. Microscopic examination ofP. meandrinaplanulae by fluorescencein situhybridization with bacterial and Roseobacter clade-specific oligonucleotide probes revealed differences in the densities and locations of planulae-associated cells. Planulae exposed to either raw seawater or strains ofPseudoalteromonasand Roseobacter harbored the highest densities of internally associated cells, of which 20 to 100% belonged to the Roseobacter clade. Planulae exposed to sterile seawater or strains of the SAR11 clade andSynechococcusdid not show evidence of prominent bacterial associations. Additional analysis of the raw-seawater-exposed planulae via electron microscopy confirmed the presence of internally associated prokaryotic cells, as well as virus-like particles. These results suggest that the availability of specific microorganisms may be an important factor in the establishment of coral-bacterial relationships.

Neolithic Pits, a Bronze Age Cremation and an Early Iron Age Ring-Ditch at Newton Farm, Cambuslang, Lanarkshire

2009 ◽  
Vol 31 (1-2) ◽  
pp. 1-31
Author(s):  
Leonora O'Brien ◽  
Victoria Clements ◽  
Mike Roy ◽  
Neil Macnab
Keyword(s):  
Bronze Age ◽  
Iron Age ◽  
Housing Development ◽  
Early Iron Age ◽  
Small Ring ◽  
Late Bronze Age ◽  
River Terraces

Fieldwork at Newton Farm, Cambuslang (NGR NS 672 610) was undertaken in advance of housing development in 2005–6. A cluster of six shallow Neolithic pits were excavated, and a collection of 157 round-based, carinated bowl sherds and a quern fragment were recovered from them. The pits produced a date range of 3700 to 3360 cal BC. Most of the pits yielded burnt material, and one of the pits showed evidence of in situ burning. The pottery may form ‘structured deposits’. A Bronze Age adult cremation placed in a Food Vessel dated to 3610±30 BP (2040–1880 cal BC) was set in a wider landscape of single and multiple cremations and inhumations on the river terraces overlooking the Clyde. A possible unurned cremation was also identified. This was cut by the course of a small ring-ditch dated to the very late Bronze Age or early Iron Age 2520±30 BP (800–530cal BC).

Methodology for in situ stress intensity factor determination on cracked structures by digital image correlation

2010 ◽  
Vol 1 (4) ◽  
pp. 344-357 ◽  
Author(s):  
V. Richter‐Trummer ◽  
P.M.G.P. Moreira ◽  
S.D. Pastrama ◽  
M.A.P. Vaz ◽  
P.M.S.T. de Castro
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Digital Image Correlation ◽  
Intensity Factor ◽  
Digital Image ◽  
Strain Field ◽  
Image Correlation ◽  
Content Type ◽  
Cracked Structures

PurposeThe purpose of this paper is to develop a methodology for in situ stress intensity factor (SIF) determination that can be used for the analysis of cracked structures. The technique is based on digital image correlation (DIC) combined with an overdetermined algorithm.Design/methodology/approachThe linear overdeterministic algorithm for calculating the SIF based on stress values around the crack tip is applied to a strain field obtained by DIC.FindingsAs long as the image quality is sufficiently high, a good accuracy can be obtained for the measured SIF. The crack tip can be automatically detected based on the same strain field. The use of the strain field instead of the displacement field, eliminates problems related to the rigid body motion of the analysed structure.Practical implicationsIn future works, based on the applied techniques, the SIF of complex cracked plane stress structures can be accurately determined in real engineering applications.Originality/valueThe paper demonstrates application of known techniques, refined for other applications, also the use of stress field for SIF overdeterministic calculations.

Sign in / Sign up

Export Citation Format

Share Document