On the build orientation effect in as-printed and as-sintered bending properties of 17-4PH alloy fabricated by metal fused filament fabrication

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Chanun Suwanpreecha ◽  
Anchalee Manonukul
Keyword(s):  
Design Methodology ◽  
Bending Strength ◽  
Low Cost ◽  
Bending Properties ◽  
Fused Filament Fabrication ◽  
Flexural Mode ◽  
Content Type ◽  
Edge Orientation ◽  
Build Orientation ◽  
Bending Strain

Purpose The purpose of this paper is to systematically investigate the influence of build orientation on the anisotropic as-printed and as-sintered bending properties of 17-4PH stainless steel fabricated by metal fused filament fabrication (MFFF). Design/methodology/approach The bending properties of 17-4PH alloy fabricated by low-cost additive manufacturing (MFFF) using three build orientations (the Flat, On-edge and Upright orientations) are examined at both as-printed and as-sintered states. Findings Unlike tensile testing where the Flat and On-edge orientations provide similar as-sintered tensile properties, the On-edge orientation produces a significantly higher bending strain with a lower bending strength than the Flat orientation. This arises from the printed layer sliding due to the Poisson's effect, which is only observed in the On-edge orientation together with the alternated layers of highly deformed and shifted voids. The bending properties show that the Upright orientation exhibits the lowest bending properties and limited plasticity due to the layer delamination. Originality/value This study is the first work to study the effect of build orientation on the flexural properties for MFFF. This work gives insight information into anisotropy in flexural mode for MFFF part design.

scholarly journals Robotic additive manufacturing system for dynamic build orientations

2020 ◽  
Vol 26 (4) ◽  
pp. 659-667
Author(s):  
Nicholas R. Fry ◽  
Robert C. Richardson ◽  
Jordan H. Boyle
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Design Methodology ◽  
Degrees Of Freedom ◽  
Manufacturing System ◽  
Print Quality ◽  
Orientation Relationships ◽  
Fused Filament Fabrication ◽  
Content Type ◽  
Build Orientation

Purpose This paper aims to present a multi-axis additive robot manufacturing system (ARMS) and demonstrate its beneficial capabilities. Design/methodology/approach ARMS was constructed around two robot arms and a fused filament fabrication (FFF) extruder. Quantitative experiments are conducted to investigate the effect of printing at different orientations with respect to gravity, the effect of dynamically changing build orientation with respect to the build tray when printing overhanging features, the effect of printing curved parts using curved, conformal layers. These capabilities are combined to print an integrated demonstrator showing potential practical benefits of the system. Findings Orientation with respect to gravity has no effect on print quality; dynamically changing build orientation allows overhangs up to 90° to be cleanly printed without support structures; printing an arch with conformal layers significantly increases its strength compared to conventional printing. Research limitations/implications The challenge of automatic slicing algorithms has not been addressed for multi-axis printing. It is shown that ARMS could eventually enable printing of fully-functional prototypes with embedded components. Originality/value This work is the first to prove that the surface roughness of an FFF part is independent of print orientation with respect to gravity. The use of two arms creates a novel system with more degrees of freedom than existing multi-axis printers, enabling studies on printing orientation relationships and printing around inserts. It also adds to the emerging body of multi-axis literature by verifying that curved layers improve the strength of an arch which is steeply curved and printed with the nozzle remaining normal to the curvature.

Web-based tools for collaborative research

2017 ◽  
Vol 34 (8) ◽  
pp. 8-19
Author(s):  
Stacy Brody
Keyword(s):  
Collaborative Research ◽  
Design Methodology ◽  
Research Collaboration ◽  
Low Cost ◽  
Research Process ◽  
Web Based ◽  
Content Type ◽  
Collaborative Tools ◽  
Start Ups ◽  
Practical Implications

Purpose The purpose of this paper is to profile various types of Web-based tools to facilitate research collaboration within and across institutions. Design/methodology/approach Various Web-based tools were tested by the author. Additionally, tutorial videos and guides were reviewed. Findings There are various free and low-cost tools available to assist in the collaborative research process, and librarians are well-positioned to facilitate their usage. Practical implications Librarians and researchers will learn about various types of tools available at free or at low cost to fulfill needs of the collaborative research process. Social implications As the tools highlighted are either free or of low cost, they are also valuable to start-ups and can be recommended for entrepreneurs. Originality/value As the realm of Web-based collaborative tools continues to evolve, the options must be continually revisited and reviewed for currency.

Additive manufacturing of 316L stainless-steel structures using fused filament fabrication technology: mechanical and geometric properties

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Miguel Ángel Caminero ◽  
Ana Romero ◽  
Jesús Miguel Chacón ◽  
Pedro José Núñez ◽  
Eustaquio García-Plaza ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Additive Manufacturing ◽  
Austenitic Stainless Steel ◽  
Material Properties ◽  
Steel Structures ◽  
Fused Filament Fabrication ◽  
Geometric Properties ◽  
Content Type ◽  
Build Orientation ◽  
Manufacturing Alternatives

Purpose Fused filament fabrication (FFF) technique using metal filled filaments in combination with debinding and sintering steps can be a cost-effective alternative for laser-based powder bed fusion processes. The mechanical behaviour of FFF-metal materials is highly dependent on the processing parameters, filament quality and adjusted post-processing steps. In addition, the microstructural material properties and geometric characteristics are inherent to the manufacturing process. The purpose of this study is to characterize the mechanical and geometric performance of three-dimensional (3-D) printed FFF 316 L metal components manufactured by a low-cost desktop 3-D printer. The debinding and sintering processes are carried out using the BASF catalytic debinding process in combination with the BASF 316LX Ultrafuse filament. Special attention is paid on the effects of build orientation and printing strategy of the FFF-based technology on the tensile and geometric performance of the 3-D printed 316 L metal specimens. Design/methodology/approach This study uses a toolset of experimental analysis techniques [metallography and scanning electron microcope (SEM)] to characterize the effect of microstructure and defects on the material properties under tensile testing. Shrinkage and the resulting porosity of the 3-D printed 316 L stainless steel sintered samples are also analysed. The deformation behaviour is investigated for three different build orientations. The tensile test curves are further correlated with the damage surface using SEM images and metallographic sections to present grain deformation during the loading progress. Mechanical properties are directly compared to other works in the field and similar additive manufacturing (AM) and Metal Injection Moulding (MIM) manufacturing alternatives from the literature. Findings It has been shown that the effect of build orientation was of particular significance on the mechanical and geometric performance of FFF-metal 3-D printed samples. In particular, Flat and On-edge samples showed an average increase in tensile performance of 21.7% for the tensile strength, 65.1% for the tensile stiffness and 118.3% for maximum elongation at fracture compared to the Upright samples. Furthermore, it has been able to manufacture near-dense 316 L austenitic stainless steel components using FFF. These properties are comparable to those obtained by other metal conventional processes such as MIM process. Originality/value 316L austenitic stainless steel components using FFF technology with a porosity lower than 2% were successfully manufactured. The presented study provides more information regarding the dependence of the mechanical, microstructural and geometric properties of FFF 316 L components on the build orientation and printing strategy.

Mobilizing the technology storm: app-based stress relief – using free or low-cost apps to beat work and personal stress

2014 ◽  
Vol 31 (6) ◽  
pp. 8-11
Author(s):  
Thomas Finley
Keyword(s):  
Design Methodology ◽  
Low Cost ◽  
Stress Relief ◽  
Content Type ◽  
Take Back ◽  
Library Users ◽  
Personal Stress ◽  
Mental Space

Purpose – The purpose of this article is to review apps that will enable librarians to take back control of their own mental space and hopefully provide some means to relaxation. Sometimes it is hard to find a soothing space amidst the chaos of the outside world. Our library users turn to the author to provide these spaces in their own lives, but paradoxically, today’s librarian may find little relaxation within their own library’s walls. Design/methodology/approach – The author tests and reviews apps designed to help librarians relax. Findings – The author reviews various different apps designed to help librarians relax. Originality/value – The apps reviewed here will enable librarians to take back control of their own mental space and hopefully, provide some means to relaxation.

Developing the right brand image

2018 ◽  
Vol 34 (9) ◽  
pp. 35-36
Keyword(s):  
Case Studies ◽  
Design Methodology ◽  
Reading Time ◽  
Brand Image ◽  
Low Cost ◽  
Content Type ◽  
Customer Base ◽  
Pertinent Information ◽  
The Right ◽  
Practical Implications

Purpose Reviews the latest management developments across the globe and pinpoints practical implications from cutting-edge research and case studies. Design/methodology/approach This briefing is prepared by an independent writer who adds their own impartial comments and places the articles in context. Findings Developing a feeling of authenticity about products amongst the target customer base is an essential goal for marketers even in terms of low cost items. Consumers derive information from a broad range of marketing communications and consistency is a key element for success. Originality/value The briefing saves busy executives and researchers hours of reading time by selecting only the very best, most pertinent information and presenting it in a condensed and easy-to-digest format.

scholarly journals The role of marketing in today's enterprises

2014 ◽  
Vol 25 (2) ◽  
pp. 171-194 ◽  
Author(s):  
Jochen Wirtz ◽  
Sven Tuzovic ◽  
Volker G. Kuppelwieser
Keyword(s):  
Firm Performance ◽  
Market Orientation ◽  
Design Methodology ◽  
Low Cost ◽  
Structural Models ◽  
The West ◽  
Marketing Department ◽  
Content Type ◽  
The Usa

Purpose – The purpose of this paper is to explore the role of marketing in today's enterprises and examines the antecedents of the marketing department's influence and its relationship with market orientation and firm performance. Design/methodology/approach – Data were collected from the West (i.e. the USA and Europe) and the East (i.e. Asia). Partial least squares (PLS) was used to estimate structural models. Findings – The findings support the idea that a strong and influential marketing department contributes positively to firm performance. This finding holds for Western and Asian, and for small/medium and large firms alike. Second, the marketing department's influence in a firm depends more on its responsibilities and resources, and less on internal contingency factors (i.e. a firm's competitive strategy or institutional attributes). Third, a marketing department's influence in the West affects firm performance both directly and indirectly (via market orientation). In contrast, this relationship is fully mediated among Eastern firms. Fourth, low-cost strategies enhance the influence of a firm's marketing department in the East, but not in the West. Research limitations/implications – The paper assumes explicitly that a marketing department's influence is an antecedent of its market orientation. While the paper finds support for this link, the paper did not test for dual causality between the constructs. Originality/value – Countering the frequent claim in anecdotal and journalistic work that the role of the marketing department diminishes, the findings show that across different geographic regions and firm sizes, strong marketing departments improve firm performance (especially in the marketing-savvy West), and that they should continue to play an important role in firms.

Gaining customer knowledge in low cost airlines through text mining

2014 ◽  
Vol 114 (9) ◽  
pp. 1344-1359 ◽  
Author(s):  
Bee Yee Liau ◽  
Pei Pei Tan
Keyword(s):  
Text Mining ◽  
Customer Service ◽  
Design Methodology ◽  
Low Cost ◽  
Negative Polarity ◽  
Statistical Techniques ◽  
Content Type ◽  
Low Cost Carriers ◽  
Flight Cancellations ◽  
Practical Implications

Purpose – The purpose of this paper is to study the consumer opinion towards the low-cost airlines or low-cost carriers (LCCs) (these two terms are used interchangeably) industry in Malaysia to better understand consumers’ needs and to provide better services. Sentiment analysis is undertaken in revealing current customers’ satisfaction level towards low-cost airlines. Design/methodology/approach – About 10,895 tweets (data collected for two and a half months) are analysed. Text mining techniques are used during data pre-processing and a mixture of statistical techniques are used to segment the customers’ opinion. Findings – The results with two different sentiment algorithms show that there is more positive than negative polarity across the different algorithms. Clustering results show that both K-Means and spherical K-Means algorithms delivered similar results and the four main topics that are discussed by the consumers on Twitter are customer service, LCCs tickets promotions, flight cancellations and delays and post-booking management. Practical implications – Gaining knowledge of customer sentiments as well as improvements on the four main topics discussed in this study, i.e. customer service, LCCs tickets promotions, flight cancellations or delays and post-booking management will help LCCs to attract more customers and generate more profits. Originality/value – This paper provides useful insights on customers’ sentiments and opinions towards LCCs by utilizing social media information.

Feel Good Management as valuable tool to shape workplace culture and drive employee happiness

2016 ◽  
Vol 15 (1) ◽  
pp. 14-19 ◽  
Author(s):  
Stefanie Frenking
Keyword(s):  
Design Methodology ◽  
Low Cost ◽  
Workplace Culture ◽  
Management Support ◽  
Content Type ◽  
Good Management ◽  
Global Workforce ◽  
Look Back ◽  
Practical Implications ◽  
Employee Happiness

Purpose – The purpose of this paper is looking at Feel Good Management as a valuable tool to shape workplace culture and drive employee happiness: a low cost but priceless strategy for engaging a global workforce. Design/methodology/approach – A look back at Feel Good Management in practice after four years in global workforce. Findings – Very favorable impact on recruitment, retention and engagement. Research limitations/implications – A potentially valuable tool for retaining global talent with strong management support and continuous branding of the culture. Practical implications – One manager can shape and act as ambassador but the entire workforce must embrace the approach for true success. Social implications – Employees, especially millennials, care about far more than a paycheck. They want to feel valued and a part of something. Originality/value – Every company is different but any entity can benefit from a strategic focus on shaping workplace culture.

Design and practicability evaluation: a novel platform for fabric steam ironing

2016 ◽  
Vol 28 (4) ◽  
pp. 449-462 ◽  
Author(s):  
Shuaitong Liang ◽  
Xue Mei Ding ◽  
Xiong Ying Wu ◽  
Fan Wu ◽  
Tesfaye Mulu Asmamaw
Keyword(s):  
Level Set ◽  
Flow Rate ◽  
Design Of Experiment ◽  
Design Methodology ◽  
Low Cost ◽  
New Products ◽  
Steam Flow ◽  
Content Type ◽  
Test Platform ◽  
Fabric Materials

Purpose – Smooth appearance of fabrics after ironing with steam, soleplate, ironing speed and their interactions cannot be studied using household ironing machines such as hang steamer and flatiron. The purpose of this paper is to present the design and verification of a simple, low-cost test platform based on the fabric materials hang-ironing factors includes temperature, humidity, ironing speed (time). Design/methodology/approach – This platform achieves adjustable and stable steam flow rate, enabling any ironing speed and any temperature of soleplate below 200°C. Moreover, the whole ironing process is automatically after experiment level set ahead for better observation to the ironing process. Findings – Regression results of the apparatus are stable, statistical significant which is verified by the statistics under design of experiment. Originality/value – It is useful in other aspects such as nozzle test and improvement, new products evaluation and smooth appearance level experiment and test for new ironing product and its research. It is also useful in other aspects such as nozzle test and improvement, new products evaluation and smooth appearance level experiment and test for new ironing product and its research.

Personal digital libraries: a self-archiving approach

2014 ◽  
Vol 63 (6/7) ◽  
pp. 436-451 ◽  
Author(s):  
Nikitas N. Karanikolas ◽  
Christos Skourlas
Keyword(s):  
Digital Libraries ◽  
Design Methodology ◽  
Low Cost ◽  
The Self ◽  
Information Process ◽  
Content Type ◽  
Wide Range ◽  
Software Product ◽  
Reduced Time ◽  
Key Questions

Purpose – The purpose of this paper is to examine personal digital libraries (PDL) as a self-archiving approach, mainly based on individuals’ activities. Literature presents a wide range of perceptions of the term PDL. The rationale of using PDL and the capabilities that PDL should offer are also discussed. The key questions we focus on are: “What are the critical features of PDL?” and “Are there technologies that enable the implementation/incorporation of such capabilities in a low cost software product?” Design/methodology/approach – We focus on “a user centred view of information process”, and examine how PDL could assist individuals to “create, seek, share and manage the life of information” (Foster et al., 2010). The capabilities that PDL should support, and the related technologies, are also discussed. Then, we describe experimentation with a prototype implemented to support/provide the mentioned capabilities. It is used to clarify our view for the creation of PDL. Finally, further discussion and conclusions are presented. Findings – The technology is mature enough for building up PDLs with the specified features/capabilities. Originality/value – A new perception of the term PDLs is presented. This perception tries to combine the self-archiving approach of information, based on a low-cost tool, and the user-centred approach to manage the “life of information”. This type of library is mainly used to cover personal needs. Users benefit from this type of PDL by personalised handling of information, reduced time to search and seek specific documents in their personal collections and less possibility for broken links or unavailable documents. We must also mention that new opportunities seem to appear for offering PDL as a service in the cloud.

Sign in / Sign up

Export Citation Format

Share Document