A Structure-Behavior Coalescence Method for Integrating SysML Internal Block Diagram with Activity Diagram

2019 ◽  
Author(s):  
Keng-Pei Lin ◽  
Te-Min Chang ◽  
Ming-Fu Hsu ◽  
Sin-Jin Lin ◽  
William S. Chao
Keyword(s):  
Block Diagram ◽  
Activity Diagram ◽  
Internal Block

Research on SysML-Based Modeling for Production Management System

2013 ◽  
Vol 753-755 ◽  
pp. 1868-1874
Author(s):  
Dong Ping Qiao ◽  
Xiao Juan Liu ◽  
Hao Li
Keyword(s):  
Systems Engineering ◽  
Management System ◽  
Large Scale ◽  
Production Management ◽  
Block Diagram ◽  
Modeling Language ◽  
Activity Diagram ◽  
Complex Product ◽  
Production Management System ◽  
Internal Block

A comprehensive and systematic model for the production process of large-scale equipment manufacturing can reduce the cost and time of the development and enforcement of the management system. The characters of a modeling language for systems engineering, SysML(Systems Modeling Language), are introduced, and through analyzing the complexity of the production management system for complex product, the basic requirements of its modeling are given; With the practical example in our project, SysML based model is built for production management system of complex product manufacturing ,the application of requirements diagram, use case diagram, block definition diagram, internal block diagram and activity diagram is introduced emphatically.

An Image Reconstruction System Applied to High Voltage Microscopy

1975 ◽  
Vol 33 ◽  
pp. 292-293
Author(s):  
D. E. Johnson
Keyword(s):  
High Voltage ◽  
Prior Information ◽  
Block Diagram ◽  
Three Dimensional ◽  
Real Space ◽  
Two Dimensional ◽  
Efficient Manner ◽  
Fourier Methods ◽  
Tilt Series ◽  
Methods Of Reconstruction

Increased specimen penetration; the principle advantage of high voltage microscopy, is accompanied by an increased need to utilize information on three dimensional specimen structure available in the form of two dimensional projections (i.e. micrographs). We are engaged in a program to develop methods which allow the maximum use of information contained in a through tilt series of micrographs to determine three dimensional speciman structure.In general, we are dealing with structures lacking in symmetry and with projections available from only a limited span of angles (±60°). For these reasons, we must make maximum use of any prior information available about the specimen. To do this in the most efficient manner, we have concentrated on iterative, real space methods rather than Fourier methods of reconstruction. The particular iterative algorithm we have developed is given in detail in ref. 3. A block diagram of the complete reconstruction system is shown in fig. 1.

On-line alignment and astigmatism correction using a TV and personal computer

1993 ◽  
Vol 51 ◽  
pp. 202-203
Author(s):  
F. Hosokawa ◽  
Y. Kondo ◽  
T. Honda ◽  
Y. Ishida ◽  
M. Kersker
Keyword(s):  
High Resolution ◽  
Personal Computer ◽  
Block Diagram ◽  
Incident Beam ◽  
Ccd Camera ◽  
Alignment Procedure ◽  
Astigmatism Correction ◽  
Transmission Electron ◽  
Alignment System ◽  
On Line

High-resolution transmission electron microscopy must attain utmost accuracy in the alignment of incident beam direction and in astigmatism correction, and that, in the shortest possible time. As a method to eliminate this troublesome work, an automatic alignment system using the Slow-Scan CCD camera has been introduced recently. In this method, diffractograms of amorphous images are calculated and analyzed to detect misalignment and astigmatism automatically. In the present study, we also examined diffractogram analysis using a personal computer and digitized TV images, and found that TV images provided enough quality for the on-line alignment procedure of high-resolution work in TEM. Fig. 1 shows a block diagram of our system. The averaged image is digitized by a TV board and is transported to a computer memory, then a diffractogram is calculated using an FFT board, and the feedback parameters which are determined by diffractogram analysis are sent to the microscope(JEM- 2010) through the RS232C interface. The on-line correction system has the following three modes.

Pemodelan Website Geografis Tempat Pelayanan Kesehatan di Palembang

2018 ◽  
Vol 7 (2) ◽  
pp. 144
Author(s):  
Arsia Rini ◽  
Heki Aprianto
Keyword(s):  
Object Oriented ◽  
Use Case ◽  
Activity Diagram ◽  
Use Case Diagram

Tempat pelayanan kesehatan bertujuan untuk memberikan pelayanan kesehatan kepada masyarakat melalui lembaga institusi pelayanan kesehatan. Masyarakat di Kota Palembang mendapatkan informasi tempat pelayanan kesehatan melalui informasi masyarakat sekitar, lembaga pelayanan kesehatan dan beberapa situs internet yang ditampilkan secara terpisah. Maka sebuah website geografis diperlukan untuk menampilkan tata letak lokasi pelayanan kesehatan dan informasi lengkap tentang pelayanan kesehatan di Kota Palembang. Penelitian ini bertujuan untuk membuat sebuah pemodelan website geografis tempat pelayanan kesehatan di Kota Palembang. Pemodelan yang digunakan berbasis object oriented dengan menerapkan use case diagram dan activity diagram.

The methodological approach for the determination of the pressure of artificial raindrops as a question of the theory of splash soil erosion

2020 ◽  
pp. 24-28
Author(s):  
Mihail Zver'kov
Keyword(s):  
Block Diagram ◽  
Methodological Approach ◽  
Control Measures ◽  
Soil Conditions ◽  
Effective Pressure ◽  
Long Distance ◽  
Splash Erosion ◽  
Rain Drops ◽  
Artificial Rain ◽  
The Impact

To the article the results of the theoretical and experimental researches are given on questions of estimates of the dynamic rate effect of raindrop impact on soil. The aim of this work was to analyze the current methods to determine the rate of artificial rain pressure on the soil for the assessment of splash erosion. There are the developed author’s method for calculation the pressure of artificial rain on the soil and the assessment of splash erosion. The study aims to the justification of evaluation methods and the obtaining of quantitative characteristics, prevention and elimination of accelerated (anthropogenic) erosion, the creation and the realization of the required erosion control measures. The paper considers the question of determining the pressure of artificial rain on the soil. At the moment of raindrops impact, there is the tension in the soil, which is called vertical effective pressure. It is noted that the impact of rain drops in the soil there are stresses called vertical effective pressure. The equation for calculation of vertical effective pressure is proposed in this study using the known spectrum of raindrops. Effective pressure was 1.4 Pa for the artificial rain by sprinkler machine «Fregat» and 5.9 Pa for long distance sprinkler DD-30. The article deals with a block diagram of the sequence for determining the effective pressure of rain drops on the soil. This diagram was created by the author’s method of calculation of the effective pressure of rain drops on the soil. The need for an integrated approach to the description of the artificial rain impact on the soil is noted. Various parameters characterizing drop erosion are considered. There are data about the mass of splashed soil in the irrigation of various irrigation machinery and installations. For example, the rate (mass) of splashed soil was 0.28…0.78 t/ha under irrigation sprinkler apparatus RACO 4260–55/701C in the conditions of the Ryazan region. The method allows examining the environmental impact of sprinkler techniques for analyzes of the pressure, caused by raindrops, on the soil. It can also be useful in determining the irrigation rate before the runoff for different types of sprinkler equipment and soil conditions.

Prototype Aplikasi Analisa Sistem Informasi Inventory Barang Pada PT Anugrah Distributor Indonesia

ICIT Journal ◽  
2020 ◽  
Vol 6 (1) ◽  
pp. 50-60
Author(s):  
Ilamsyah Ilamsyah ◽  
Sri Rahayu ◽  
Dewi Lisnawati
Keyword(s):  
Sequence Diagram ◽  
Class Diagram ◽  
Use Case ◽  
Modelling Language ◽  
Activity Diagram ◽  
Unified Modelling Language ◽  
Use Case Diagram

Inventory adalah aktiva yang meliputi barang-barang milik perusahaan, instansi, bidang pendidikan dan lain-lain. PT Anugrah Distributor Indonesia merupakan instansi milik perusahaan teknologi informasi yang didalamnya terdapat bagian logistik. Logistik berfungsi untuk mengelola kegiatan transaksi pembelian dan pengeluaran barang. Pengelolaan tersebut masih memanfaatkan Ms Excel. Sistem ini memakan waktu lama dalam proses pengelolaan data dan tingkat keakuratannya belum maksimal. Untuk memperoleh keakuratan data, logistik membutuhkan suatu sistem yang efisien, efektif dan valid dalam mengelola kegiatan transaksi pembelian dan pengeluaran barang. Dengan demikian dalam penelitian ini peneliti melakukan pengembangan sistem logistik yang saling terintegrasi menggunakan Unified Modelling Language (UML) yang digambarkan dengan Use Case Diagram, Activity Diagram, Sequence Diagram dan Class Diagram dan menggunakan bahasa pemprogramman PHP (Hypertext Preprocessor). Hasil akhir dari penelitian ini adalah sistem informasi inventory stok barang yang sesuai dengan kebutuhan dan memudahkan user dalam menginput dan membuat laporan persediaan barang. Sistem ini dibuat agar proses inventory dapat terkendali dengan baik, menjadi efektif dan efisien. Kata kunci: Sistem inventory, UML, PHP, Sistem Informasi

CALCULATION OF STAGES OF THE TECHNOLOGICAL PROCESS OF MANUFACTURE OF PPD DETECTORS USING COMPUTER MATHEMATICAL MODELING AND PRODUCTION OF ALPHA RADIOMETER ON THEIR BASIS

2020 ◽  
Vol 7 (2) ◽  
pp. 21-28
Author(s):  
SALI RADZHAPOV ◽  
◽  
RUSTAM RAKHIMOV ◽  
BEGJAN RADZHAPOV ◽  
MARS ZUFAROV
Keyword(s):  
Mathematical Modeling ◽  
Technological Process ◽  
Block Diagram ◽  
Large Diameter ◽  
Silicon Detector ◽  
Digital Processing ◽  
Main Element ◽  
Alpha Radiation ◽  
Initial Silicon ◽  
Natural Isotopes

The article describes the developed radiometer for Express measurement of alpha radiation of radioactive elements based on a large-diameter silicon detector. The main element of the PPD detector is made using computer mathematical modeling of all stages of the technological process of manufacturing detectors, taking into account at each stage the degree of influence of the properties of the initial silicon on the electrophysical and radiometric characteristics of the detector. Detectors are manufactured for certain types of devices. The developed radiometer is designed to measure alpha radiation of natural isotopes (238U, 234U, 232Th, 226Ra, 222Rn, 218Po, 214Bi, etc.) in various environments. It also shows the principle of operation of the device, provides a block diagram of the measuring complex, describes the electronic components of the radiometer, as well as the block diagram. Signal transformations (spectrum transfer, filtering, accumulation) are implemented programmatically on the basis of a digital processing module. The device can detect the presence of specific elements in various environments, as well as protect people from the harmful effects of adverse radiation and can be used both in the field and stationary.

Aiming for a Standardized Protocol for Preparing a Process Green Synthesis Report and for Ranking Multiple Synthesis Plans to a Common Target Product

2019 ◽  
Author(s):  
john andraos
Keyword(s):  
Green Synthesis ◽  
Block Diagram ◽  
Computational Method ◽  
Borda Count ◽  
Target Product ◽  
Material Efficiency ◽  
Synthesis Report ◽  
Common Target ◽  
Greenness Index ◽  
Multiple Synthesis

This paper proposes a standardized format for the preparation of process green synthesis reports that can be applied to chemical syntheses of active pharmaceutical ingredients (APIs) of importance to the pharmaceutical industry. Such a report is comprised of the following eight sections: a synthesis scheme, a synthesis tree, radial pentagons and step E-factor breakdowns for each reaction step, a tabular summary of key material efficiency step and overall metrics for a synthesis plan, a mass process block diagram, an energy consumption audit based on heating and cooling reaction and auxiliary solvents, a summary of environmental and safety-hazard impacts based on organic solvent consumption using the Rowan solvent greenness index, and a cycle time process schedule. Illustrative examples of process green synthesis reports are given for the following pharmaceuticals: 5-HT2B and 5-HT7 receptors antagonist (Astellas Pharma), brivanib (Bristol-Myers Squibb), and orexin receptor agonist (Merck). Methods of ranking synthesis plans to a common target product are also discussed using 6 industrial synthesis plans of apixaban (Bristol-Myers Squibb) as a working example. The Borda count method is suggested as a facile and reliable computational method for ranking multiple synthesis plans to a common target product using the following 4 attributes obtained from a process green synthesis report: process mass intensity, mass of sacrificial reagents used per kg of product, input enthalpic energy for solvents, and Rowan solvent greenness index for organic solvents.<br>

Sign in / Sign up

Export Citation Format

Share Document