Fuzzy temporal representation and reasoning [hot-cold water mixer simulator example]

2003 ◽  
Author(s):  
P. Meesad ◽  
G.G. Yen
Keyword(s):  
Cold Water ◽  
Temporal Representation

Patient Involvement in Treatment Decision Making Can Help or Hinder Placebo Analgesia

2014 ◽  
Vol 222 (3) ◽  
pp. 165-170 ◽  
Author(s):  
Andrew L. Geers ◽  
Jason P. Rose ◽  
Stephanie L. Fowler ◽  
Jill A. Brown
Keyword(s):  
Patient Involvement ◽  
Cold Water ◽  
Prior Experience ◽  
Water Immersion ◽  
Treatment Decision ◽  
Cold Water Immersion ◽  
Not Given ◽  
Placebo Analgesia ◽  
Treatment Decision Making ◽  
Immersion Experience

Experiments have found that choosing between placebo analgesics can reduce pain more than being assigned a placebo analgesic. Because earlier research has shown prior experience moderates choice effects in other contexts, we tested whether prior experience with a pain stimulus moderates this placebo-choice association. Before a cold water pain task, participants were either told that an inert cream would reduce their pain or they were not told this information. Additionally, participants chose between one of two inert creams for the task or they were not given choice. Importantly, we also measured prior experience with cold water immersion. Individuals with prior cold water immersion experience tended to display greater placebo analgesia when given choice, whereas participants without this experience tended to display greater placebo analgesia without choice. Prior stimulus experience appears to moderate the effect of choice on placebo analgesia.

Operation intensification methods of aggressive industrial sewage neutralization facilities

2020 ◽  
Vol 76 (11) ◽  
pp. 1149-1153
Author(s):  
N. S. Tsarev ◽  
V. I. Aksenov ◽  
I. I. Nichkova
Keyword(s):  
Cold Water ◽  
Specific Productivity ◽  
Technological Properties ◽  
Technological Parameters ◽  
Preliminary Heating ◽  
Sediment Treatment ◽  
Circulating Water ◽  
Equipment Operation ◽  
Sediment Volume ◽  
Industrial Sewage

To neutralize the waste pickling solutions and rinsing water, resulting from cleaning metal products s surface of rust by acids solutions, lime is used. Being cheap, this method of sewage neutralization has considerable drawbacks. Forming in the technological pipes strong gypsum depositions and low specific productivity of the equipment for sediment dewatering are most significant of them. Characteristic of aggressive industrial sewage, formed at pickling of ferrous metals presented. Methods of elimination of drawbacks of industrial sewage neutralization by lime considered, including stabilization of neutralized industrial sewage and control of properties of the sediment formed. It was noted, that stability of the circulating water can be provided by accelerating of crystallization of the forming gypsum sediments by introducing in it fine priming powder and heating the neutralized water up to 65-70 °С followed by thermal softening of a part of circulating water, removed out of the circulating system. It was shown, that the heating of the water and the ongoing changes of the composition and properties of the sediment result in decrease of filtration resistance 2-3 folds, increase of deposition speed 3-4 folds and decrease the sediment volume 1.5-2 folds comparing with lime neutralization in cold water. Calculated dozes of lime at the heating were taken the same as at the regular lime neutralization. Elimination of the circulating water oversaturation by bi-water gypsum can be reached also by addition into the water of powder-like gypsum pulp - priming powder for microcrystals of the gypsum, followed by aeration during 30-40 min. This method was tested under industrial conditions. Technological properties of the forming sediment can be improved by sediment treatment by flocculants and preliminary heating of the neutralized water up to 65-70 °С. Control of technological properties of the sediment is done by addition of flocculants and heating of the neutralized water. Recommendations for improving operation of the neutralization facilities presented with indicating particular technological parameters of the equipment operation for sewage and sediment treatment. 

INFLUENCE THE QUENCHING AND TEMPERING ON THE MICROSTRUCTURE, MECHANICAL PROPERTIES AND SURFACE ROUGHNESS, OF MEDIUM CARBON STEEL

2018 ◽  
Vol 18 (1) ◽  
pp. 125-135
Author(s):  
Sattar H A Alfatlawi
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Surface Roughness ◽  
Carbon Steel ◽  
Cold Water ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Heating And Cooling ◽  
Treatment Processes ◽  
Quenching And Tempering

One of ways to improve properties of materials without changing the product shape toobtain the desired engineering applications is heating and cooling under effect of controlledsequence of heat treatment. The main aim of this study was to investigate the effect ofheating and cooling on the surface roughness, microstructure and some selected propertiessuch as the hardness and impact strength of Medium Carbon Steel which treated at differenttypes of heat treatment processes. Heat treatment achieved in this work was respectively,heating, quenching and tempering. The specimens were heated to 850°C and left for 45minutes inside the furnace as a holding time at that temperature, then quenching process wasperformed in four types of quenching media (still air, cold water (2°C), oil and polymersolution), respectively. Thereafter, the samples were tempered at 200°C, 400°C, and 600°Cwith one hour as a soaking time for each temperature, then were all cooled by still air. Whenthe heat treatment process was completed, the surface roughness, hardness, impact strengthand microstructure tests were performed. The results showed a change and clearimprovement of surface roughness, mechanical properties and microstructure afterquenching was achieved, as well as the change that took place due to the increasingtoughness and ductility by reducing of brittleness of samples.

Spatial analyses reveal conservation benefits for cold-water corals and sponges from small changes in a trawl fishery footprint

2015 ◽  
Vol 528 ◽  
pp. 161-172 ◽  
Author(s):  
CR Lagasse ◽  
A Knudby ◽  
J Curtis ◽  
JL Finney ◽  
SP Cox
Keyword(s):  
Cold Water ◽  
Spatial Analyses ◽  
Trawl Fishery

Predicting cold-water bleaching in corals: role of temperature, and potential integration of light exposure

2020 ◽  
Vol 642 ◽  
pp. 133-146
Author(s):  
PC González-Espinosa ◽  
SD Donner
Keyword(s):  
Coral Bleaching ◽  
Cold Water ◽  
Light Exposure ◽  
Light Attenuation ◽  
Florida Keys ◽  
Cold Temperature ◽  
Warm Water ◽  
Coral Tissue ◽  
Effect Of Temperature ◽  
Type I

Warm-water growth and survival of corals are constrained by a set of environmental conditions such as temperature, light, nutrient levels and salinity. Water temperatures of 1 to 2°C above the usual summer maximum can trigger a phenomenon known as coral bleaching, whereby disruption of the symbiosis between coral and dinoflagellate micro-algae, living within the coral tissue, reveals the white skeleton of coral. Anomalously cold water can also lead to coral bleaching but has been the subject of limited research. Although cold-water bleaching events are less common, they can produce similar impacts on coral reefs as warm-water events. In this study, we explored the effect of temperature and light on the likelihood of cold-water coral bleaching from 1998-2017 using available bleaching observations from the Eastern Tropical Pacific and the Florida Keys. Using satellite-derived sea surface temperature, photosynthetically available radiation and light attenuation data, cold temperature and light exposure metrics were developed and then tested against the bleaching observations using logistic regression. The results show that cold-water bleaching can be best predicted with an accumulated cold-temperature metric, i.e. ‘degree cooling weeks’, analogous to the heat stress metric ‘degree heating weeks’, with high accuracy (90%) and fewer Type I and Type II errors in comparison with other models. Although light, when also considered, improved prediction accuracy, we found that the most reliable framework for cold-water bleaching prediction may be based solely on cold-temperature exposure.

INTERVENTION OF THIRSTY IN CONGESTIVE HEART FAILURE (CHF) PATIENTS TO INCREASED ADHERENCE OF FLUID RESTRICTION: A SYSTEMATIC REVIEW

2017 ◽  
Vol 3 (1) ◽  
pp. 7
Author(s):  
DIAN HUDIYAWATI
Keyword(s):  
Heart Failure ◽  
Systematic Review ◽  
Congestive Heart Failure ◽  
Intervention Studies ◽  
Cold Water ◽  
Fluid Restriction ◽  
Common Symptom ◽  
Oral Swab ◽  
Hand Search ◽  
Effective Interventions

Introduction. Thirst is a common symptom of chronic heart failure (CHF) patients. Difficulties to adherence with fluid restrictions are among the effects of thirst in HF patients and therefore have an impact on worsening condition, but intervention studies aimed specifically at reducing thirst in CHF are lacking.Purpose. Purpose of this manuscript is to assess the effective intervention to reduce thirst intensity in CHF patients.Methods. Medline, Pubmed, EBSCO and hand search were searched using the key words thirst, intervention, heart failure, CHF, fluis restriction, therapy.Result.� Eighteen articles were found, six studies were inluded. Any kind of interventions in each articles, include: drink cold water 5oC, chewing gum, saliva substitute, sucking ice cubes and three bundle of interventions (oral swab, water sprays and menthol moisturizer).Conclusions. The most effective interventions to alleviate thirst was sucking ice cubes. But, no intervention studies were found in congestive heart failure patients. So investigations in people with heart failure is needed.�Keywords: thirst, intervention, heart failure, systematic review

Experimental Investigation of Heat Transfer Enhancement by Using Different Number of Fins in Circular Tube

2018 ◽  
Vol 6 (3) ◽  
pp. 1-12
Author(s):  
Kamil Abdul Hussien
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Cold Water ◽  
Finned Tube ◽  
Hot Water ◽  
Copper Tube ◽  
Smooth Tube ◽  
Tube Heat Exchanger ◽  
Mass Flow Rates ◽  
Flow Heat

Abstract-The present work investigates the enhancement of heat transfer by using different number of circular fins (8, 10, 12, 16, and 20) in double tube counter flow heat exchanger experimentally. The fins are made of copper with dimensions 66 mm OD, 22 mm ID and 1 mm thickness. Each fin has three of 14 mm diameter perforations located at 120o from each to another. The fins are fixed on a straight smooth copper tube of 1 m length, 19.9 mm ID and 22.2 mm OD. The tube is inserted inside the insulated PVC tube of 100 mm ID. The cold water is pumped around the finned copper tube, inside the PVC, at mass flow rates range (0.01019 - 0.0219) kg/s. The Reynold's number of hot water ranges (640 - 1921). The experiment results are obtained using six double tube heat exchanger (1 smooth tube and the other 5 are finned one). The results, illustrated that the heat transfer coefficient proportionally with the number of fin. The results also showed that the enhancement ratio of heat transfer for finned tube is higher than for smooth tube with (9.2, 10.2, 11.1, 12.1 13.1) times for number of fins (8, 10, 12, 16 and 20) respectively.

Sign in / Sign up

Export Citation Format

Share Document