Improvement of static noise margin in SRAM by post-fabrication self-convergence technique

Author(s):  
M. Suzuki ◽  
T. Saraya ◽  
K. Shimizu ◽  
T. Sakurai ◽  
T. Hiramoto
Author(s):  
Jitendra Kumar Mishra ◽  
Lakshmi Likhitha Mankali ◽  
Kavindra Kandpal ◽  
Prasanna Kumar Misra ◽  
Manish Goswami

The present day electronic gadgets have semiconductor memory devices to store data. The static random access memory (SRAM) is a volatile memory, often preferred over dynamic random access memory (DRAM) due to higher speed and lower power dissipation. However, at scaling down of technology node, the leakage current in SRAM often increases and degrades its performance. To address this, the voltage scaling is preferred which subsequently affects the stability and delay of SRAM. This paper therefore presents a negative bit-line (NBL) write assist circuit which is used for enhancing the write ability while a separate (isolated) read buffer circuit is used for improving the read stability. In addition to this, the proposed design uses a tail (stack) transistor to decrease the overall static power dissipation and also to maintain the hold stability. The comparison of the proposed design has been done with state-of-the-art work in terms of write static noise margin (WSNM), write delay, read static noise margin (RSNM) and other parameters. It has been observed that there is an improvement of 48%, 11%, 19% and 32.4% in WSNM while reduction of 33%, 39%, 48% and 22% in write delay as compared to the conventional 6T SRAM cell, NBL, [Formula: see text] collapse and 9T UV SRAM, respectively.


2021 ◽  
Vol 7 ◽  
pp. 22-34
Author(s):  
Vinod Kumar ◽  
Ram Murti Rawat

A paper that examines the factors thataffect the Static Noise Margin (SNM) of a StaticRandom Access memories. At an equivalent time,they specialise in optimizing Read and Writeoperation of 8T SRAM cell which is best than 6TSRAM cell Using Swing Restoration Dual NodeVoltage. The read and Write operation and improveStability analysis. This SRAM technique on thecircuit or architecture level is required to improveread and write operation. during this paperComparative Analysis of 6T and 8T SRAM Cellswith Improved Read and Write Margin is completedfor 180 nm Technology with Cadence Virtuososchematics Tool.This Paper is organized as follows: thecharacteristics of 6T SRAM cell are described arerepresented in section VIII. In section IX, proposed8T SRAM cell is described. In section X, Standard8T SRAM cell is described. Section XI includes thesimulation results which give comparison of variousparameters of 6T and 8T SRAM cells. In Section XIISimulation Results and DC analysis and sectionXIII conclusion the work.


2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Mathan Natarajamoorthy ◽  
Jayashri Subbiah ◽  
Nurul Ezaila Alias ◽  
Michael Loong Peng Tan

The development of the nanoelectronics semiconductor devices leads to the shrinking of transistors channel into nanometer dimension. However, there are obstacles that appear with downscaling of the transistors primarily various short-channel effects. Graphene nanoribbon field-effect transistor (GNRFET) is an emerging technology that can potentially solve the issues of the conventional planar MOSFET imposed by quantum mechanical (QM) effects. GNRFET can also be used as static random-access memory (SRAM) circuit design due to its remarkable electronic properties. For high-speed operation, SRAM cells are more reliable and faster to be effectively utilized as memory cache. The transistor sizing constraint affects conventional 6T SRAM in a trade-off in access and write stability. This paper investigates on the stability performance in retention, access, and write mode of 15 nm GNRFET-based 6T and 8T SRAM cells with that of 16 nm FinFET and 16 nm MOSFET. The design and simulation of the SRAM model are simulated in synopsys HSPICE. GNRFET, FinFET, and MOSFET 8T SRAM cells give better performance in static noise margin (SNM) and power consumption than 6T SRAM cells. The simulation results reveal that the GNRFET, FinFET, and MOSFET-based 8T SRAM cells improved access static noise margin considerably by 58.1%, 28%, and 20.5%, respectively, as well as average power consumption significantly by 97.27%, 99.05%, and 83.3%, respectively, to the GNRFET, FinFET, and MOSFET-based 6T SRAM design.


Author(s):  
Shayesteh Masoumian ◽  
Georgios Selimis ◽  
Roel Maes ◽  
Geert-Jan Schrijen ◽  
Said Hamdioui ◽  
...  

2016 ◽  
Vol 65 ◽  
pp. 20-26 ◽  
Author(s):  
Kolsoom Mehrabi ◽  
Behzad Ebrahimi ◽  
Roohollah Yarmand ◽  
Ali Afzali-Kusha ◽  
Hamid Mahmoodi

Sign in / Sign up

Export Citation Format

Share Document