Experimental research on the temperature characterization of a miniature phase change cells in the blackbody for the on-orbit radiometric calibration of thermal infrared sensors

2022 ◽  
pp. 1-1
Author(s):  
Xiaopeng Hao ◽  
Ruiheng Sima ◽  
Yang Liu ◽  
Jian Song ◽  
Ping Wen ◽  
...  
Keyword(s):  
Phase Change ◽  
Experimental Research ◽  
Thermal Infrared ◽  
Radiometric Calibration ◽  
Infrared Sensors

scholarly journals Integrated Approach for Detecting Convection Effects in Geothermal Environments Based on TIR Camera Measurements

2021 ◽  
Vol 11 (7) ◽  
pp. 3185
Author(s):  
Susana Del Pozo ◽  
Cristina Sáez-Blázquez ◽  
Ignacio Martín Nieto ◽  
Susana Lagüela
Keyword(s):  
Thermal Conductivity ◽  
Infrared Camera ◽  
Heat Rate ◽  
Thermal Characterization ◽  
Thermal Infrared ◽  
Integrated Approach ◽  
Geothermal System ◽  
Radiometric Calibration ◽  
Geothermal Systems

Thermal characterization of soils is essential for many applications, including design of geothermal systems. Traditional devices focus on the computation of thermal conductivity, omitting the analysis of the convection effect, which is important for horizontal geothermal systems. In this paper, a procedure based on the monitoring of the surface of the soil with a thermal infrared (TIR) camera is developed for the evaluation of the global thermal imbalance on the surface and in-depth. This procedure allows for the computation of thermal conductivity and global convection heat rate, consequently constituting a complete thermal characterization of the geothermal system. The validation of the results is performed through the evaluation of the radiometric calibration of the thermal infrared camera used for the monitoring and the comparison of the thermal conductivity values obtained in-depth, with traditional methods, and for the surface of the system.

scholarly journals Overcoming the Challenges of Thermal Infrared Orthomosaics Using a Swath-Based Approach to Correct for Dynamic Temperature and Wind Effects

2021 ◽  
Vol 13 (16) ◽  
pp. 3255 ◽  
Author(s):  
Yoann Malbéteau ◽  
Kasper Johansen ◽  
Bruno Aragon ◽  
Samir K. Al-Mashhawari ◽  
Matthew F. McCabe
Keyword(s):  
Surface Temperature ◽  
Rapid Development ◽  
Image Data ◽  
Surface Characteristics ◽  
Thermal Infrared ◽  
Radiometric Calibration ◽  
Agricultural Field ◽  
Infrared Sensors ◽  
Flight Direction ◽  
Significant Difference

The miniaturization of thermal infrared sensors suitable for integration with unmanned aerial vehicles (UAVs) has provided new opportunities to observe surface temperature at ultra-high spatial and temporal resolutions. In parallel, there has been a rapid development of software capable of streamlining the generation of orthomosaics. However, these approaches were developed to process optical and multi-spectral image data and were not designed to account for the often rapidly changing surface characteristics inherent in the collection and processing of thermal data. Although radiometric calibration and shutter correction of uncooled sensors have improved, the processing of thermal image data remains difficult due to (1) vignetting effects on the uncooled microbolometer focal plane array; (2) inconsistencies between images relative to in-flight effects (wind-speed and direction); (3) unsuitable methods for thermal infrared orthomosaic generation. Here, we use thermal infrared UAV data collected with a FLIR-based TeAx camera over an agricultural field at different times of the day to assess inconsistencies in orthophotos and their impact on UAV-based thermal infrared orthomosaics. Depending on the wind direction and speed, we found a significant difference in UAV-based surface temperature (up to 2 °C) within overlapping areas of neighboring flight lines, with orthophotos collected with tail wind being systematically cooler than those with head wind. To address these issues, we introduce a new swath-based mosaicking approach, which was compared to three standard blending modes for orthomosaic generation. The swath-based mosaicking approach improves the ability to identify rapid changes of surface temperature during data acquisition, corrects for the influence of flight direction relative to the wind orientation, and provides uncertainty (pixel-based standard deviation) maps to accompany the orthomosaic of surface temperature. It also produced more accurate temperature retrievals than the other three standard orthomosaicking methods, with a root mean square error of 1.2 °C when assessed against in situ measurements. As importantly, our findings demonstrate that thermal infrared data require appropriate processing to reduce inconsistencies between observations, and thus, improve the accuracy and utility of orthomosaics.

scholarly journals Fabrication and characterization of hexadecyl acrylate cross-linked phase change microspheres

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 69-75
Author(s):  
Haoran Yun ◽  
Xingxiang Zhang
Keyword(s):  
Phase Change ◽  
Smooth Surface ◽  
Bone Conduction ◽  
Cross Linking ◽  
Gravimetric Analysis ◽  
Orthopedic Implant ◽  
Thermal Gravimetric ◽  
Fabrication And Characterization ◽  
Fast Release

AbstractMicrospheres with phase change properties were fabricated by polymerization of hexadecyl acrylate (HA) and different cross-linking agents. The samples were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). The results show that, the samples that added cross-linking agents have a smooth surface and the latent heat of them is different. The experiments show that all of the cross-linked copolymer shells can be made into temperature controlled release microspheres. These materials can be potentially applied in the field of thermal energy storage. β-tricalcium phosphate was encapsulated in microspheres to obtain one with a fast release effect. It will effectively promote bone conduction when these microspheres were implanted into a bone defect. This microsphere can be used for orthopedic implant or coating of instrument in the future.

scholarly journals Experimental Characterization of Phase Change Materials for Refrigeration Processes

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3033
Author(s):  
Anastasia Stamatiou ◽  
Lukas Müller ◽  
Roger Zimmermann ◽  
Jamie Hillis ◽  
David Oliver ◽  
...  
Keyword(s):  
Energy Density ◽  
Phase Change ◽  
Thermophysical Properties ◽  
Phase Change Materials ◽  
Cost Effective ◽  
Latent Heat Storage ◽  
Lower Energy Density ◽  
Change Material ◽  
Storage Units

Latent heat storage units for refrigeration processes are promising as alternatives to water/glycol-based storage due to their significantly higher energy densities, which would lead to more compact and potentially more cost-effective storages. In this study, important thermophysical properties of five phase change material (PCM) candidates are determined in the temperature range between −22 and −35 °C and their compatibility with relevant metals and polymers is investigated. The goal is to complement existing scattered information in literature and to apply a consistent testing methodology to all PCMs, to enable a more reliable comparison between them. More specifically, the enthalpy of fusion, melting point, density, compatibility with aluminum, copper, polyethylene (PE), polypropylene (PP), neoprene and butyl rubber, are experimentally determined for 1-heptanol, n-decane, propionic acid, NaCl/water mixtures, and Al(NO3)3/water mixtures. The results of the investigations reveal individual strengths and weaknesses of the five candidates. Further, 23.3 wt.% NaCl in water stands out for its very high volumetric energy density and n-decane follows with a lower energy density but better compatibility with surrounding materials and supercooling performance. The importance of using consistent methodologies to determine thermophysical properties when the goal is to compare PCM performance is highlighted.

scholarly journals Characterization of Unripe and Mature Avocado Seed Oil in Different Proportions as Phase Change Materials and Simulation of Their Cooling Storage

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 107
Author(s):  
Evelyn Reyes-Cueva ◽  
Juan Francisco Nicolalde ◽  
Javier Martínez-Gómez
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Seed Oil ◽  
Energy System ◽  
Maturity Stage ◽  
Natural Environments ◽  
Renewable Materials ◽  
Scanning Calorimetry ◽  
Avocado Seed

Environmental problems have been associated with energy consumption and waste management. A solution is the development of renewable materials such as organic phase change materials. Characterization of new materials allows knowing their applications and simulations provide an idea of how they can developed. Consequently, this research is focused on the thermal and chemical characterization of five different avocado seed oils depending on the maturity stage of the seed: 100% unripe, 25% mature-75% unripe, 50% mature-50% unripe, 75% mature-25% unripe, and 100% mature. The characterization was performed by differential scanning calorimetry, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The best oil for natural environments corresponded to 100% matured seed with an enthalpy of fusion of 52.93 J·g−1, and a degradation temperature between 241–545 °C. In addition, the FTIR analysis shows that unripe seed oil seems to contain more lipids than a mature one. Furthermore, a simulation with an isothermal box was conducted with the characterized oil with an initial temperature of −14 °C for the isothermal box, −27 °C for the PCM box, and an ambient temperature of 25 °C. The results show that without the PCM the temperature can reach −8 °C and with it is −12 °C after 7 h, proving its application as a cold thermal energy system.

scholarly journals Influence of Adding Encapsulated Phase Change Materials in Aerial Lime Based Mortars

2013 ◽  
Vol 687 ◽  
pp. 255-261 ◽  
Author(s):  
Sandra Cunha ◽  
José Barroso Aguiar ◽  
Victor Ferreira ◽  
António Tadeu
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Renewable Energy Sources ◽  
High Growth ◽  
High Energy ◽  
High Growth Rate ◽  
Aesthetic Appearance ◽  
Hardened State ◽  
High Energy Consumption

Increasingly in a society with a high growth rate and standards of comfort, the need to minimize the currently high energy consumption by taking advantage of renewable energy sources arises. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing for an increase in the level of thermal comfort and reduction of the use of heating, ventilation and air conditioning (HVAC) equipment, using only the energy supplied by the sun. However, the incorporation of PCM in mortars modifies some of its characteristics. Therefore, the main objective of this study was the characterization of mortars doped with two different phase change materials. Specific properties of different PCM, such as particle size, shape and enthalpy were studied, as well as the properties of the fresh and hardened state of these mortars. Nine different compositions were developed which were initially doped with microcapsules of PCM A and subsequently doped with microcapsules of PCM B. It was possible to observe that the incorporation of phase change materials in mortars causes differences in properties such as compressive strength, flexural strength and shrinkage. After the study of the behaviour of these mortars with the incorporation of two different phase change materials, it was possible to select the composition with a better compromise between its aesthetic appearance, physical and mechanical characteristics.

Sign in / Sign up

Export Citation Format

Share Document