Dynamic Modeling and Experimental Testing of a Piano Action Mechanism

2005 ◽  
Vol 1 (1) ◽  
pp. 47-55 ◽  
Author(s):  
Martin Hirschkorn ◽  
John McPhee ◽  
Stephen Birkett
Keyword(s):  
Rigid Body ◽  
Dynamic Model ◽  
Dynamic Modeling ◽  
Experimental Testing ◽  
Individual Action ◽  
Action Mechanism ◽  
Friction Forces ◽  
Multibody Dynamic ◽  
Main Action ◽  
Grand Piano

A model for a grand piano action is proposed in this paper. The multibody dynamic model treats each of the five main action components (key, whippen, jack, repetition lever, and hammer) as a rigid body, and incorporates a contact model to determine the normal and friction forces at 13 locations between each of the contacting bodies. All parameters in the model are directly measured from experiments on individual action components, allowing the model to be used as a prototyping tool for actions that have not yet been designed or built. The behavior of the model was compared to the behavior of an experimental grand piano action and found to be very accurate for high force blows, and reasonably accurate for low force blows.

Dynamic Modelling and Experimental Testing of a Piano Action Mechanism

2005 ◽  
Author(s):  
Martin C. Hirschkorn ◽  
John McPhee ◽  
Stephen Birkett
Keyword(s):  
Rigid Body ◽  
Dynamic Model ◽  
Experimental Testing ◽  
Dynamic Modelling ◽  
Individual Action ◽  
Action Mechanism ◽  
Friction Forces ◽  
Multibody Dynamic ◽  
Main Action ◽  
Grand Piano

A new model for a grand piano action is proposed in this paper. The multibody dynamic model treats each of the five main action components (key, whippen, jack, repetition lever, and hammer) as a rigid body, and incorporates a contact model to determine the normal and friction forces at 13 locations between each of the contacting bodies. All parameters in the model are directly measured from experiments on individual action components, allowing the model to be used as a prototyping tool for actions that have not yet been designed or built. The behaviour of the model was compared to the behaviour of an experimental grand piano action and found to be very accurate for high force blows, and reasonably accurate for low force blows.

MULTIBODY DYNAMIC MODELING AND FLUTTER ANALYSIS OF A FLEXIBLE SLENDER VEHICLE

2012 ◽  
Vol 12 (06) ◽  
pp. 1250049 ◽  
Author(s):  
A. RASTI ◽  
S. A. FAZELZADEH
Keyword(s):  
Differential Equations ◽  
Rigid Body ◽  
Dynamic Modeling ◽  
Equations Of Motion ◽  
The Body ◽  
Elastic Deformations ◽  
Strip Theory ◽  
Multibody Dynamic ◽  
Flutter Analysis ◽  
Rigid Body Motions

In this paper, multibody dynamic modeling and flutter analysis of a flexible slender vehicle are investigated. The method is a comprehensive procedure based on the hybrid equations of motion in terms of quasi-coordinates. The equations consist of ordinary differential equations for the rigid body motions of the vehicle and partial differential equations for the elastic deformations of the flexible components of the vehicle. These equations are naturally nonlinear, but to avoid high nonlinearity of equations the elastic displacements are assumed to be small so that the equations of motion can be linearized. For the aeroelastic analysis a perturbation approach is used, by which the problem is divided into a nonlinear flight dynamics problem for quasi-rigid flight vehicle and a linear extended aeroelasticity problem for the elastic deformations and perturbations in the rigid body motions. In this manner, the trim values that are obtained from the first problem are used as an input to the second problem. The body of the vehicle is modeled with a uniform free–free beam and the aeroelastic forces are derived from the strip theory. The effect of some crucial geometric and physical parameters and the acting forces on the flutter speed and frequency of the vehicle are investigated.

Dynamic Modeling and Response Analysis of a Planar Rigid-Body Mechanism With Clearance

2019 ◽  
Vol 14 (5) ◽  
Author(s):  
Chen Xiulong ◽  
Jiang Shuai ◽  
Deng Yu ◽  
Wang Qing
Keyword(s):  
Rigid Body ◽  
Dynamic Model ◽  
Dynamic Modeling ◽  
Contact Force ◽  
Kinematic Model ◽  
Dynamic Responses ◽  
Response Analysis ◽  
Prototype Model ◽  
Force Model ◽  
Normal Contact

In order to understand dynamic responses of planar rigid-body mechanism with clearance, the dynamic model of the mechanism with revolute clearance is proposed and the dynamic analysis is realized. First, the kinematic model of the revolute clearance is built; the amount of penetration depth and relative velocity between the elements of the revolute clearance joint is obtained. Second, Lankarani-Nikravesh (L-N) and the novel nonlinear contact force model are both used to describe the normal contact force of the revolute clearance, and the tangential contact force of the revolute clearance is built by modified Coulomb friction model. Third, the dynamic model of a two degrees-of-freedom (2DOFs) nine bars rigid-body mechanism with a revolute clearance is built by the Lagrange equation. The fourth-order Runge–Kutta method has been utilized to solve the dynamic model. And the effects of different driving speeds of cranks, different clearance values, and different friction coefficients on dynamic response are analyzed. Finally, in order to prove the validity of numerical calculation result, the virtual prototype model of 2DOFs nine bars mechanism with clearance is modeled and its dynamic responses are analyzed by adams software. This research could supply theoretical basis for dynamic modeling, dynamic behaviors analysis, and clearance compensation control of planar rigid-body mechanism with clearance.

Pseudo-rigid-body dynamic modeling and analysis of compliant mechanisms

2017 ◽  
Vol 232 (9) ◽  
pp. 1665-1678 ◽  
Author(s):  
Yue-Qing Yu ◽  
Qian Li ◽  
Qi-Ping Xu
Keyword(s):  
Rigid Body ◽  
Dynamic Model ◽  
Dynamic Modeling ◽  
Dynamic Models ◽  
Compliant Mechanisms ◽  
Lagrange Equation ◽  
Dynamic Responses ◽  
Modeling And Analysis ◽  
Rigid Body Dynamic ◽  
Body Dynamic

An intensive study on the dynamic modeling and analysis of compliant mechanisms is presented in this paper based on the pseudo-rigid-body model. The pseudo-rigid-body dynamic model with single degree-of-freedom is proposed at first and the dynamic equation of the 1R pseudo-rigid-body dynamic model for a flexural beam is presented briefly. The pseudo-rigid-body dynamic models with multi-degrees-of-freedom are then derived in detail. The dynamic equations of the 2R pseudo-rigid-body dynamic model and 3R pseudo-rigid-body dynamic model for the flexural beams are obtained using Lagrange equation. Numerical investigations on the natural frequencies and dynamic responses of the three pseudo-rigid-body dynamic models are made. The effectiveness and superiority of the pseudo-rigid-body dynamic model has been shown by comparing with the finite element analysis method. An example of a compliant parallel-guiding mechanism is presented to investigate the dynamic behavior of the mechanism using the 2R pseudo-rigid-body dynamic model.

Modeling the Dynamics of Five-Axis Machine Tool Using the Multibody Approach

2020 ◽  
Vol 143 (2) ◽  
Author(s):  
Hoai Nam Huynh ◽  
Yusuf Altintas
Keyword(s):  
Rigid Body ◽  
Machine Tool ◽  
Dynamic Model ◽  
Degrees Of Freedom ◽  
Dynamic Performance ◽  
Body Motion ◽  
Proposed Model ◽  
Multibody Dynamic ◽  
Machining Operations ◽  
Five Axis

Abstract A systematic modeling of multibody dynamics of five-axis machine tools is presented in this article. The machine is divided into major subassemblies such as spindle, column, bed, tool changer, and longitudinal and rotary drives. The inertias and mass center of each subassembly are calculated from the design model. The subassemblies are connected with elastic springs and damping elements at contact joints to form the complete multibody dynamic model of the machine that considers the rigid body kinematics and structural vibrations of the machine at any point. The unknown elastic joint parameters are estimated from the experimental modal analysis of the machine tool. The resulting position-dependent multibody dynamic model has the minimal number of degrees-of-freedom that is equivalent to the number of measured modes, as opposed to thousands used in finite element models. The frequency response functions of the machine can be predicted at any posture of the five-axis machine, which are compared against the directly measured values to assess the validity of model. The proposed model can predict the combined rigid body motion and vibrations of the machine with computational efficiency, and hence, it can be used as a digital twin to simulate its dynamic performance in machining operations and tracking control tests of the servo drives.

Dynamic Modeling and Experimental Testing of a Piano Action Mechanism With a Flexible Hammer Shank

2007 ◽  
Author(s):  
Adel Izadbakhsh ◽  
John McPhee ◽  
Stephen Birkett
Keyword(s):  
Experimental Testing ◽  
Rigid Bodies ◽  
Beam Model ◽  
Action Mechanism ◽  
Rayleigh Beam ◽  
Hammer Head ◽  
Main Components ◽  
The Impact ◽  
Grand Piano ◽  
Theoretical Results

The piano action is the mechanism that transforms the finger force applied to a key into a motion of a hammer that strikes a piano string. This paper presents a state-of-the-art model of a grand piano action, which is based on the five main components of the action mechanism (key, whippen, jack, repetition lever, and hammer). Even though Askenfelt and Jansson [1] detected some flexibility for the hammer shank in their experiments, all previous piano models have assumed the hammers to be rigid bodies. In this paper, we have accounted for the hammer shank flexibility using a Rayleigh beam model. It turns out that the flexibility of the hammer shank does not significantly affect the rotation of the other parts of the piano mechanism, compared with the case that the hammer shank has been modeled as a rigid part. However, the flexibility of the hammer shank changes the impact velocity of the hammer head, and also causes a greater scuffing motion for the hammer head during the contact with the string. To validate the theoretical results, experimental measurements were taken by two strain gauges mounted on the hammer shank, and by optical encoders at three of the joints.

Dynamic Modeling and Experimental Testing of a Piano Action Mechanism With a Flexible Hammer Shank

2008 ◽  
Vol 3 (3) ◽  
Author(s):  
Adel Izadbakhsh ◽  
John McPhee ◽  
Stephen Birkett
Keyword(s):  
Experimental Testing ◽  
Rigid Bodies ◽  
Beam Model ◽  
Action Mechanism ◽  
Rayleigh Beam ◽  
Hammer Head ◽  
Main Components ◽  
The Impact ◽  
Grand Piano ◽  
Theoretical Results

The piano action is the mechanism that transforms the finger force applied to a key into a motion of a hammer that strikes a piano string. This paper presents a state-of-the-art model of a grand piano action, which is based on the five main components of the action mechanism (key, whippen, jack, repetition lever, and hammer). Even though some piano action researchers (e.g., Askenfelt and Jansson) detected some flexibility for the hammer shank in their experiments, all previous piano models have assumed the hammers to be rigid bodies. In this paper, we have accounted for the hammer shank flexibility using a Rayleigh beam model. It turns out that the flexibility of the hammer shank does not significantly affect the rotation of the other parts of the piano mechanism and the impact velocity of the hammer head, compared to the case that the hammer shank has been modeled as a rigid part. However, the flexibility of the hammer shank causes a greater scuffing motion for the hammer head during the contact with the string. To validate the theoretical results, experimental measurements were taken by two strain gauges mounted on the hammer shank, and by optical encoders at three of the joints.

scholarly journals Slipping–rolling transitions of a body with two contact points

2021 ◽  
Author(s):  
Mate Antali ◽  
Gabor Stepan
Keyword(s):  
Rigid Body ◽  
Contact Point ◽  
Static Friction ◽  
Rigid Body Dynamics ◽  
Contact Forces ◽  
Friction Forces ◽  
Contact Points ◽  
Body Dynamics ◽  
Coulomb Model ◽  
Rigid Surfaces

AbstractIn this paper, the general kinematics and dynamics of a rigid body is analysed, which is in contact with two rigid surfaces in the presence of dry friction. Due to the rolling or slipping state at each contact point, four kinematic scenarios occur. In the two-point rolling case, the contact forces are undetermined; consequently, the condition of the static friction forces cannot be checked from the Coulomb model to decide whether two-point rolling is possible. However, this issue can be resolved within the scope of rigid body dynamics by analysing the nonsmooth vector field of the system at the possible transitions between slipping and rolling. Based on the concept of limit directions of codimension-2 discontinuities, a method is presented to determine the conditions when the two-point rolling is realizable without slipping.

Multibody Dynamic Model of Web Guiding System With Moving Web

2010 ◽  
Vol 132 (5) ◽  
Author(s):  
Lei Yu ◽  
Zhihua Zhao ◽  
Gexue Ren
Keyword(s):  
Dynamic Model ◽  
Lateral Displacement ◽  
Dynamical Behavior ◽  
Contact Forces ◽  
Lagrangian Formulation ◽  
Pi Control ◽  
Control Law ◽  
Reference Surface ◽  
Multibody Dynamic ◽  
Guiding System

In this paper, a multibody dynamic model is established to simulate the dynamics and control of moving web with its guiding system, where the term moving web is used to describe thin materials, which are manufactured and processed in a continuous, flexible strip form. In contrast with available researches based on Eulerian description and beam assumption, webs are described by Lagrangian formulation with the absolute nodal coordinate formulation (ANCF) plate element, which is based on Kirchhoff’s assumptions that material normals to the original reference surface remain straight and normal to the deformed reference surface, and the nonlinear elasticity theory that accounts for large displacement, large rotation, and large deformation. The rollers and guiding mechanism are modeled as rigid bodies. The distributed frictional contact forces between rollers and web are considered by Hertz contact model and are evaluated by Gauss quadrature. The proportional integral (PI) control law for web guiding is also embedded in the multibody model. A series of simulations on a typical web-guide system is carried out using the multibody dynamics approach for web guiding system presented in this study. System dynamical information, for example, lateral displacement, stress distribution, and driving moment for web guiding, are obtained from simulations. Parameter sensitivity analysis illustrates the effect of influence variables and effectiveness of the PI control law for lateral movement control of web that are verified under different gains. The present Lagrangian formulation of web element, i.e., ANCF element, is not only capable of describing the large movement and deformation but also easily adapted to capture the distributed contact forces between web and rollers. The dynamical behavior of the moving web can be accurately described by a small number of ANCF thin plate elements. Simulations carried out in this paper show that the present approach is an effective method to assess the design of web guiding system with easily available desktop computers.

scholarly journals Planetary Gearbox Dynamic Modeling Considering Bearing Clearance and Sun Gear Tooth Crack

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2638
Author(s):  
Xianhua Chen ◽  
Xingkai Yang ◽  
Ming J. Zuo ◽  
Zhigang Tian
Keyword(s):  
Dynamic Model ◽  
Dynamic Modeling ◽  
Failure Modes ◽  
Gear Tooth ◽  
Working Environment ◽  
The Sun ◽  
Planetary Gearbox ◽  
Bearing Clearance ◽  
Vibration Responses ◽  
Planet Gear

Planetary gearbox systems are critical mechanical components in heavy machinery such as wind turbines. They may suffer from various failure modes, due to the harsh working environment. Dynamic modeling is a useful method to support early fault detection for enhancing reliability and reducing maintenance costs. However, reported studies have not considered the sun gear tooth crack and bearing clearance simultaneously to analyze their combined effect on vibration characteristics of planetary gearboxes. In this paper, a dynamic model is developed for planetary gearboxes considering the clearance of planet gear, sun gear, and carrier bearings, as well as sun gear tooth crack levels. Bearing forces are calculated considering bearing clearance, and the dynamic model equations are updated accordingly. The results reveal that the combination of bearing clearances can affect the vibration response with sun gear tooth crack by increasing the kurtosis. It is found that the effect of planet gear bearing clearance is very small, while the sun gear and carrier bearing clearance has clear impact on the vibration responses. These findings suggest that the incorporation of bearing clearance is important for planetary gearbox dynamic modeling.

Sign in / Sign up

Export Citation Format

Share Document