scholarly journals Rolling Stock

2001 ◽  
Vol 123 (02) ◽  
pp. 59-59 ◽  
Author(s):  
John DeGaspari
Keyword(s):  
Coefficient Of Friction ◽  
Management System ◽  
Synthetic Polymer ◽  
Rolling Stock ◽  
Friction Modifier ◽  
The Coefficient Of Friction ◽  
Computer Controlled ◽  
Management Services

This article discusses features of a new friction management system, which is intended to boost efficiency on the railroad. Friction Management Services LLC of West Chicago, Illinois, has developed a friction management system, called TracGlide that consists of a synthetic polymer and computerized application equipment, installed on the locomotive at the front of the train. Unlike conventional lubrication schemes, the TracGlide system applies a friction modifier, not a lubricant, to the top of the rail. Although railroads usually avoid treating the tops of rails to avoid traction problems, the TracGlide polymer tends to increase the coefficient of friction when needed. The friction modifier is applied on both rails after the last axle of the last locomotive at the front of the train passes by. The application is computer controlled, based on factors such as the train’s weight, track curvature, speed, and temperature of the lubricant, which are constantly changing.

Experimental study on the relationship between the friction coefficient and interference in locomotive axle press-fitting

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ting Wang ◽  
Hanfei Guo ◽  
Jianjun Qiao ◽  
Xiaoxue Liu ◽  
Zhixin Fan
Keyword(s):  
Friction Coefficient ◽  
Coefficient Of Friction ◽  
Friction Pair ◽  
Rolling Stock ◽  
Content Type ◽  
Press Fitting ◽  
The Press ◽  
The Coefficient Of Friction ◽  
The Relationship ◽  
Locomotive Wheels

PurposeTo address the lack of data in this field and determine the relationship between the coefficient of friction and the interference between locomotive wheels and axles, this study evaluates the theoretical relationship between the coefficient of friction and the interference under elastic deformation.Design/methodology/approachWhen using numerical analyses to study the mechanical state of the contacting components of the wheels and axle, the interference between the axle parts and the coefficient of friction between the axle parts are two important influencing factors. Currently, as the range of the coefficient of friction between the wheel and axle in interference remains unknown, it is generally considered that the coefficient of friction is only related to the materials of the friction pair; the relationship between the interference and the coefficient of friction is often neglected.FindingsA total of 520 press-fitting experiments were conducted for 130 sets of wheels and axles of the HXD2 locomotive with 4 types of interferences, in order to obtain the relationship between the coefficient of friction between the locomotive wheel and axle and the amount of interference. These results are expected to serve as a reference for selecting the coefficient of friction when designing axle structures with the rolling stock, research on the press-fitting process and evaluations of the fatigue life.Originality/valueThe study provides a basis for the selection of friction coefficient and interference amount in the design of locomotive wheels and axles.

Investigation of the causes of damage to freight cars during disbanding on non-mechanized sorting slides and development of measures to prevent them

2021 ◽  
pp. 4-13
Author(s):  
S. V. Tankeev ◽  
◽  
A. E. Kolodin ◽  
V. B. Sverdlov ◽  
A. V. Nazarov ◽  
...  
Keyword(s):  
Low Power ◽  
Coefficient Of Friction ◽  
Damage Assessment ◽  
Laboratory Tests ◽  
Rolling Stock ◽  
Third Body ◽  
Normative Documents ◽  
The Coefficient Of Friction ◽  
Loading And Unloading ◽  
The Relationship

The damage assessment of freight cars during shunting and loading and unloading operations was made. The need to review the normative documents regulating the relationship between the owners of rolling stock, owners of non-public tracks and the carrier is noted. The reasons for formation of damage on the wheel pairs of freight cars when disbanding on low-power sorting slides are considered. The conditions for ensuring the deceleration of detachments on non-mechanized sorting slides without damaging the wheels are determined. The analysis of methods for ensuring braking on low-power slides is carried out. A method was chosen to ensure the wheel set rotation by introducing a third body between the rubbing surfaces during the braking of cars, which will take over a part of the resulting heat flow, reducing the temperature and increasing the coefficient of friction in the «wheel-rail» contact zone. A method is proposed to provide braking on the non-mechanized sorting slide during shoe braking by applying a friction compound to a non-working rail. Laboratory tests were carried out, which showed that the introduction of a friction additive can achieve the necessary coefficient of friction to comply with the standard parameters of deceleration of the car in the braking zone.

scholarly journals Increase in the coefficient of friction of the rolling stock disc brake via fluid cooling of its friction elements

2016 ◽  
Vol 37 (6) ◽  
pp. 523-528 ◽  
Author(s):  
Yu. Yu. Osenin ◽  
I. I. Sosnov ◽  
O. V. Sergienko ◽  
A. V. Chesnokov ◽  
Yu. I. Osenin ◽  
...  
Keyword(s):  
Coefficient Of Friction ◽  
Rolling Stock ◽  
Disc Brake ◽  
The Coefficient Of Friction ◽  
Fluid Cooling

Carry distance of top-of-rail friction modifiers

2018 ◽  
Vol 232 (10) ◽  
pp. 2418-2430
Author(s):  
Saad Ahmed Khan ◽  
Jan Lundberg ◽  
Christer Stenström
Keyword(s):  
Coefficient Of Friction ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Third Body ◽  
Friction Modifiers ◽  
Friction Modifier ◽  
Railway Traffic ◽  
Railway Industry ◽  
The Coefficient Of Friction

Rail issues such as corrugation, rolling contact fatigue, noise and wear have been increasing with the increase in railway traffic. The application of top-of-rail friction modifiers (TOR-FMs) is claimed by their manufacturers in the railway industry to be a well-established technique for resolving the above-mentioned issues. There are various methods for applying friction modifiers at the wheel–rail interface, among which stationary wayside systems are recommended by TOR-FM manufacturers when a distance of a few kilometres is to be covered. TOR-FM manufacturers also claim that by using wayside equipment, the TOR-FM can be spread over a minimum distance of 3 km, over which it maintains a coefficient of friction of µ = 0.35 ± 0.05. To determine the carry distance of TOR-FMs, some researchers use tribometers to measure the coefficients of friction. However, moisture and deposits from the environment and trains can alter the top-of-rail friction and give a misleading indication of the presence of a friction modifier. Therefore, the coefficient of friction itself is not a clear indicator of the presence of TOR-FMs. In the present study, cotton swabs dipped in a mixture of alcohol and ester were used to collect surface deposits (a third body) from both the wheel and rail at various distances from the point of application. Subsequently, the third body collected on the cotton swab was analysed using an energy dispersive X-ray analysis. The results have shown that the maximum carry distance of TOR-FMs on the top of the rail is limited to 70 m when using a TOR-FM from one manufacturer and to 450 m when using a TOR-FM from another manufacturer. The carry distance on the contact band of the wheel is limited to 100 m and 340 m. The friction modifier on the edges of the contact band was detected over a distance of up to 3 km; however, this will not minimise the damage or friction at the wheel–rail interface.

scholarly journals Mathematical model of the influence of the rheology of lubricating compositions on the safety of rolling stock movement

2021 ◽  
Vol 2131 (2) ◽  
pp. 022021
Author(s):  
Elena Pinevich ◽  
Yuriy Lazarev ◽  
Nikolay Bolgarov ◽  
Dmitry Altynov ◽  
Yuri Fatyushin
Keyword(s):  
Mathematical Model ◽  
Coefficient Of Friction ◽  
Single Point ◽  
Point Contact ◽  
Rolling Stock ◽  
Lubricant Layer ◽  
Infinite Length ◽  
The Coefficient Of Friction ◽  
Supporting Force ◽  
Plasticity Parameter

Abstract The article deals with the search for rational and balanced solutions to ensure maximum safety of rolling stock movement, taking into account the minimization of costs and technical measures. The paper presents a mathematical model for calculating the effect of rheological characteristics of lubricants on the service life of heavy-loaded friction units of rolling stock. The scheme of interaction of a wheel with a rail at a single-point contact is presented in the form of contacts of two cylinders of infinite length. The results of numerical analysis of the found analytical dependences of the influence of the plasticity parameter on the coefficient of friction, the influence of the plasticity parameter on the supporting force created by the lubricant layer during the movement of surfaces are presented. The influence of the coefficient of friction on the safety of rolling stock movement in the curved sections of the track is established.

Experimental Investigation of aluminum doping crumb rubber/epoxy composite in reciprocating motion

2015 ◽  
Vol 3 ◽  
pp. 1
Author(s):  
Goutam Chandra Karar ◽  
Nipu Modak
Keyword(s):  
Experimental Investigation ◽  
Coefficient Of Friction ◽  
Epoxy Composite ◽  
Normal Load ◽  
Crumb Rubber ◽  
The Other ◽  
Reciprocating Motion ◽  
Molding Process ◽  
Friction Tester ◽  
The Coefficient Of Friction

The experimental investigation of reciprocating motion between the aluminum doped crumb rubber /epoxy composite and the steel ball has been carried out under Reciprocating Friction Tester, TR-282 to study the wear and coefficient of frictions using different normal loads (0.4Kg, 0.7Kgand1Kg), differentfrequencies (10Hz, 25Hz and 40Hz).The wear is a function of normal load, reciprocating frequency, reciprocating duration and the composition of the material. The percentage of aluminum presents in the composite changesbut the other components remain the same.The four types of composites are fabricated by compression molding process having 0%, 10%, 20% and 30% Al. The effect of different parameters such as normal load, reciprocating frequency and percentage of aluminum has been studied. It is observed that the wear and coefficient of friction is influenced by the parameters. The tendency of wear goes on decreasing with the increase of normal load and it is minimum for a composite having 10%aluminum at a normal load of 0.7Kg and then goes on increasing at higher loads for all types of composite due to the adhesive nature of the composite. The coefficient of friction goes on decreasing with increasing normal loads due to the formation of thin film as an effect of heat generation with normal load.

scholarly journals Tribological Aspects, Optimization and Analysis of Cu-B-CrC Composites Fabricated by Powder Metallurgy

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4217
Author(s):  
Üsame Ali Usca ◽  
Mahir Uzun ◽  
Mustafa Kuntoğlu ◽  
Serhat Şap ◽  
Khaled Giasin ◽  
...  
Keyword(s):  
Weight Loss ◽  
Wear Rate ◽  
Coefficient Of Friction ◽  
Applied Load ◽  
Practical Significance ◽  
Tribological Characteristics ◽  
M 10 ◽  
Wide Range ◽  
The Coefficient Of Friction ◽  
Four Levels

Tribological properties of engineering components are a key issue due to their effect on the operational performance factors such as wear, surface characteristics, service life and in situ behavior. Thus, for better component quality, process parameters have major importance, especially for metal matrix composites (MMCs), which are a special class of materials used in a wide range of engineering applications including but not limited to structural, automotive and aeronautics. This paper deals with the tribological behavior of Cu-B-CrC composites (Cu-main matrix, B-CrC-reinforcement by 0, 2.5, 5 and 7.5 wt.%). The tribological characteristics investigated in this study are the coefficient of friction, wear rate and weight loss. For this purpose, four levels of sliding distance (1000, 1500, 2000 and 2500 m) and four levels of applied load (10, 15, 20 and 25 N) were used. In addition, two levels of sliding velocity (1 and 1.5 m/s), two levels of sintering time (1 and 2 h) and two sintering temperatures (1000 and 1050 °C) were used. Taguchi’s L16 orthogonal array was used to statistically analyze the aforementioned input parameters and to determine their best levels which give the desired values for the analyzed tribological characteristics. The results were analyzed by statistical analysis, optimization and 3D surface plots. Accordingly, it was determined that the most effective factor for wear rate, weight loss and friction coefficients is the contribution rate. According to signal-to-noise ratios, optimum solutions can be sorted as: the highest levels of parameters except for applied load and reinforcement ratio (2500 m, 10 N, 1.5 m/s, 2 h, 1050 °C and 0 wt.%) for wear rate, certain levels of all parameters (1000 m, 10 N, 1.5 m/s, 2 h, 1050 °C and 2.5 wt.%) for weight loss and 1000 m, 15 N, 1 m/s, 1 h, 1000 °C and 0 wt.% for the coefficient of friction. The comprehensive analysis of findings has practical significance and provides valuable information for a composite material from the production phase to the actual working conditions.

scholarly journals Influence of Beam Power on Young’s Modulus and Friction Coefficient of Ti–Ta Alloys Formed by Electron-Beam Surface Alloying

Metals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1246
Author(s):  
Stefan Valkov ◽  
Dimitar Dechev ◽  
Nikolay Ivanov ◽  
Ruslan Bezdushnyi ◽  
Maria Ormanova ◽  
...  
Keyword(s):  
Electron Beam ◽  
Young’S Modulus ◽  
Coefficient Of Friction ◽  
Young's Modulus ◽  
Beam Power ◽  
Surface Alloying ◽  
Surface Alloys ◽  
X Ray ◽  
The Coefficient Of Friction ◽  
Beam Surface

In this study, we present the results of Young’s modulus and coefficient of friction (COF) of Ti–Ta surface alloys formed by electron-beam surface alloying by a scanning electron beam. Ta films were deposited on the top of Ti substrates, and the specimens were then electron-beam surface alloyed, where the beam power was varied from 750 to 1750 W. The structure of the samples was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). Young’s modulus was studied by a nanoindentation test. The coefficient of friction was studied by a micromechanical wear experiment. It was found that at 750 W, the Ta film remained undissolved on the top of the Ti, and no alloyed zone was observed. By an increase in the beam power to 1250 and 1750 W, a distinguished alloyed zone is formed, where it is much thicker in the case of 1750 W. The structure of the obtained surface alloys is in the form of double-phase α’and β. In both surface alloys formed by a beam power of 1250 and 1750 W, respectively, Young’s modulus decreases about two times due to different reasons: in the case of alloying by 1250 W, the observed drop is attributed to the larger amount of the β phase, while at 1750 W is it due to the weaker binding forces between the atoms. The results obtained for the COF show that the formation of the Ti–Ta surface alloy on the top of Ti substrate leads to a decrease in the coefficient of friction, where the effect is more pronounced in the case of the formation of Ti–Ta surface alloys by a beam power of 1250 W.

Reducing the Coefficient of Friction for Fast-Absorbing Gut Suture

2009 ◽  
Vol 35 (12) ◽  
pp. 2004 ◽  
Author(s):  
Jonathan Lee Bingham ◽  
Mariah R. Brown ◽  
Julian Ramsey Mellette
Keyword(s):  
Coefficient Of Friction ◽  
The Coefficient Of Friction
Sign in / Sign up

Export Citation Format

Share Document