A Numerical Study of Vortex Shedding From a Square Cylinder With Ground Effect

1997 ◽  
Vol 119 (3) ◽  
pp. 512-518 ◽  
Author(s):  
Robert R. Hwang ◽  
Chia-Chi Yao
Keyword(s):  
Vortex Shedding ◽  
Stokes Equations ◽  
Numerical Study ◽  
Subsequent Development ◽  
Ground Effect ◽  
Navier Stokes ◽  
Square Cylinder ◽  
Navier Stokes Equations ◽  
Layer Flow ◽  
Volume Method

A numerical study has been conducted to investigate the behavior of the vortical wake created by a square cylinder placed in a laminar boundary-layer flow. The calculations are performed by solving the unsteady 2D Navier-Stokes equations with a finite-volume method. The Reynolds-number regime investigated is from 500 to 1500. Another parameter that is varied is the distance of the cylinder from the wall. The initial and subsequent development of the vortex shedding phenomenon are investigated. The presence of the wall is found to have strong effects on the properties of these vortices, as well as lift, drag, and Strouhal number.

Vortex Shedding From a Square Cylinder With Ground Effect

2003 ◽  
Author(s):  
S. Bhattacharyya ◽  
D. K. Maiti
Keyword(s):  
Reynolds Number ◽  
Vortex Shedding ◽  
Stokes Equations ◽  
Numerical Study ◽  
Ground Effect ◽  
Staggered Grid ◽  
Navier Stokes ◽  
Square Cylinder ◽  
Navier Stokes Equations ◽  
Cylinder Length

Numerical study on the wake behind a square cylinder placed parallel to a wall has been made. Flow has been investigated in the laminar Reynolds number (based on the cylinder length) range. We have studied the flow field for different values of the non-dimensional gap length between cylinder and the wall. The case when the cylinder is placed on the wall has also been considered. The governing unsteady Navier-Stokes equations are discretised through the finite volume method on staggered grid system. A SIMPLER type of algorithm has been used to compute the discretised equations iteratively. Vortex shedding has been found to be influenced by the wall. Vortex shedding suppression occurs beyond a critical value of the gap length. Due to the shear, the drag experienced by the cylinder is found to increase with the reduction of gap length. The flow is found to be steady when the cylinder is placed on the wall at a range of Reynolds number.

Numerical Study of Wing Aerodynamics in Ground Proximity

2008 ◽  
Author(s):  
Alex E. Ockfen ◽  
Konstantin I. Matveev
Keyword(s):  
Iterative Process ◽  
Stokes Equations ◽  
Numerical Study ◽  
Ground Effect ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Design And Optimization ◽  
Volume Method ◽  
Experimental Design And Optimization

Experimental design and optimization of innovative ground-effect transportation means is an iterative process which requires a large amount of time and resources. To avoid the large experimental expense, numerical modeling can be used to investigate Wing-in-Ground (WIG) vehicle flight. In this paper, modeling technique is applied for a two dimensional NACA 4412 airfoil in viscous flow in and out of ground effect. The numerical method consists of a steady state, incompressible, finite volume method utilizing the Spalart-Allmaras turbulence model. Grid generation and solution of the Navier-Stokes equations are completed using FLUENT 6.3. The modeling procedures are first validated against published experimental data for unbounded flow around an airfoil. Wing section aerodynamic characteristics are then studied for varying ground heights and two separate boundary conditions: fixed ground and moving ground. Ground effect calculations are compared to several previous studies, and our results are found to correlate with published aerodynamic trends in ground effect, although all studies appear to predict different magnitudes of aerodynamic forces.

scholarly journals Dynamics of Single Droplet Splashing on Liquid Film by Coupling FVM with VOF

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 841
Author(s):  
Yuzhen Jin ◽  
Huang Zhou ◽  
Linhang Zhu ◽  
Zeqing Li
Keyword(s):  
Liquid Film ◽  
Weber Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Single Droplet ◽  
Navier Stokes Equations ◽  
Volume Method ◽  
The Relationship

A three-dimensional numerical study of a single droplet splashing vertically on a liquid film is presented. The numerical method is based on the finite volume method (FVM) of Navier–Stokes equations coupled with the volume of fluid (VOF) method, and the adaptive local mesh refinement technology is adopted. It enables the liquid–gas interface to be tracked more accurately, and to be less computationally expensive. The relationship between the diameter of the free rim, the height of the crown with different numbers of collision Weber, and the thickness of the liquid film is explored. The results indicate that the crown height increases as the Weber number increases, and the diameter of the crown rim is inversely proportional to the collision Weber number. It can also be concluded that the dimensionless height of the crown decreases with the increase in the thickness of the dimensionless liquid film, which has little effect on the diameter of the crown rim during its growth.

Numerical Investigation of Flow Around Bluff Bodies

1998 ◽  
Vol 14 (3) ◽  
pp. 153-159 ◽  
Author(s):  
Chou-Jiu Tsai ◽  
Ger-Jyh Chen
Keyword(s):  
Vortex Shedding ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Bluff Bodies ◽  
Near Wake ◽  
Navier Stokes Equations ◽  
Physical Description ◽  
Geometrical Shapes ◽  
Flow Phenomena ◽  
Volume Method

ABSTRACTIn this study, fluid flow around bluff bodies are studied to examine the vortex shedding phenomenon in conjuction with the geometrical shapes of these vortex shedders. These flow phenomena are numerically simulated. A finite volume method is employed to solve the incompressible two-dimensional Navier-Stokes equations. Thus, quantitative descriptions of the vortex shedding phenomenon in the near wake were made, which lead to a detailed description of the vortex shedding mechanism. Streamline contours, figures of lift coefficent, and figures of drag coefficent in various time, are presented, respectively, for a physical description.

Numerical Prediction of Turbulent Wakes Behind a Square Cylinder

1998 ◽  
Vol 14 (1) ◽  
pp. 23-29
Author(s):  
Robert R. Hwang ◽  
Sheng-Yuh Jaw
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Navier Stokes ◽  
Wall Region ◽  
Square Cylinder ◽  
Mean Velocity ◽  
Navier Stokes Equations ◽  
Turbulent Vortex Shedding ◽  
Model Equations ◽  
Good Agreement

ABSTRACTThis paper presents a numerical study on turbulent vortex shedding flows past a square cylinder. The 2D unsteady periodic shedding motion was resolved in the calculation and the superimposed turbulent fluctuations were simulated with a second-order Reynolds-stress closure model. The calculations were carried out by solving numerically the fully elliptic ensemble-averaged Navier-Stokes equations coupled with the turbulence model equations together with the two-layer approach in the treatment of the near-wall region. The performance of the computations was evaluated by comparing the numerical results with data from available experiments. Results indicate that the present study gives good agreement in the shedding frequency and mean drag as well as in some phase profiles of the mean velocity.

Numerical Study of Wave Slamming on an Oscillating Flap

2014 ◽  
Author(s):  
Yanji Wei ◽  
Alan Henry ◽  
Olivier Kimmoun ◽  
Frederic Dias
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Ocean Waves ◽  
Navier Stokes ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Numerical Studies ◽  
Wave Slamming ◽  
Volume Method

Bottom hinged Oscillating Wave Surge Converters (OWSCs) are efficient devices for extracting power from ocean waves. There is limited knowledge about wave slamming on such devices. This paper deals with numerical studies of wave slamming on an oscillating flap to investigate the mechanism of slamming events. In our model, the Navier–Stokes equations are discretized using the Finite Volume method with the Volume of Fluid (VOF) approach for interface capturing. Waves are generated by a flap-type wave maker in the numerical wave tank, and the dynamic mesh method is applied to model the motion of the oscillating flap. Basic mesh and time step refinement studies are performed. The flow characteristics in a slamming event are analysed based on numerical results. Various simulations with different flap densities, water depths and wave amplitudes are performed for a better understanding of the slamming.

scholarly journals Some Modelling Issues on Trailing Edge Vortex Shedding

1999 ◽  
Author(s):  
Wei Ning ◽  
Li He
Keyword(s):  
Circular Cylinder ◽  
Vortex Shedding ◽  
Stokes Equations ◽  
Numerical Study ◽  
Independent Solution ◽  
Navier Stokes ◽  
Trailing Edge ◽  
Navier Stokes Equations ◽  
Averaged Equations ◽  
Edge Vortex

A numerical study has been carried out to investigate modelling issues on trailing edge vortex shedding. The vortex shedding from a circular cylinder and a VKI turbine blade is calculated using a 2-D unsteady multi-block Navier-Stokes solver. The unsteady stresses are calculated from the unsteady solutions. The distributions of the unsteady stresses are analysed and compared for the cylinder case and the cascade case, respectively. The time-averaged equations are then solved and the effectiveness of the “unsteady stresses” in suppressing trailing edge vortex shedding is checked. Finally, the time-independent solution produced by solving the time-averaged equations is compared with the time-averaged solution obtained by integrating the unsteady solutions. The numerical results have demonstrated that a time-independent vortex shedding solution can be achieved by solving the Navier-Stokes equations with the unsteady stresses and the time-averaged effects of the vortex shedding can be included.

A numerical study of vortex shedding from flat plates with square leading and trailing edges

1992 ◽  
Vol 236 ◽  
pp. 445-460 ◽  
Author(s):  
Yuji Ohya ◽  
Yasuharu Nakamura ◽  
Shigehira Ozono ◽  
Hideki Tsuruta ◽  
Ryuzo Nakayama
Keyword(s):  
Shear Layer ◽  
Vortex Shedding ◽  
Stokes Equations ◽  
Numerical Study ◽  
Vortical Flow ◽  
Navier Stokes ◽  
Shear Layer Instability ◽  
Flat Plates ◽  
Navier Stokes Equations ◽  
Trailing Edges

This paper describes a numerical study of the flow around flat plates with square leading and trailing edges on the basis of a finite-difference analysis of the two-dimensional Navier—Stokes equations. The chord-to-thickness ratio of a plate, d/h, ranges from 3 to 9 and the value of the Reynolds number based on the plate's thickness is constant and equal to 103. The numerical computation confirms the finding obtained in our previous experiments that vortex shedding from flat plates with square leading and trailing edges is caused by the impinging-shear-layer instability. In particular, the Strouhal number based on the plate's chord increases stepwise with increasing d/h in agreement with the experiment. Numerical analyses also provide some crucial information on the complicated vortical flow occurring near the trailing edge in conjunction with the vortex shedding mechanism. Finally, the mechanism of the impinging-shear-layer instability is discussed in the light of the experimental and numerical findings.

Interaction of a Steady Approach Flow and a Circular Cylinder Undergoing Forced Oscillation

1997 ◽  
Vol 119 (4) ◽  
pp. 808-813 ◽  
Author(s):  
Jianfeng Zhang ◽  
Charles Dalton
Keyword(s):  
Circular Cylinder ◽  
Vortex Shedding ◽  
Stokes Equations ◽  
Numerical Study ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Large Eddy Simulation Model ◽  
Drag And Lift Coefficients ◽  
Eddy Simulation ◽  
Drag And Lift

This paper presents a numerical study on the interaction of a steady approach flow and the forced transverse oscillation of a circular cylinder. The two-dimensional stream-function/vorticity formulation of the Navier-Stokes equations is solved by a semi-implicit finite-difference scheme. Calculations for flows with different amplitude (a) and frequency (fc) of the oscillation of the cylinder show a strong effect of the oscillation when fc is close to fso, the vortex shedding frequency, of the stationary cylinder. Lock-on of vortex shedding, distinct flow patterns, and increase in both drag and lift coefficients from those of a stationary cylinder are observed for Reynolds number Re = 200, a/R (R is the radius of the cylinder) from 1.0 to 2.0, fc/fso from 0.85 to 1.7. For Re = 855, a/R = 0.26, a large eddy simulation model for turbulent flow is used. The results at Re = 855 and a/R = 0.26 show that lock-on has occurred for fc/fso ≥ 0.85. The behavior of the drag and lift coefficients is seen to be influenced by the lock-on phenomenon.

scholarly journals Three-Dimensional Numerical Study of the Effect of Protective Barrier on the Dispersion of the Contaminant in a Building

Mathematics ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 1125
Author(s):  
Chemseddine Maatki
Keyword(s):  
Rayleigh Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Vorticity Vector ◽  
Volume Method ◽  
The Impact ◽  
Buoyancy Ratio

The finite volume method and potential-vorticity vector formalism in their three-dimensional form were used to numerically study the impact of an adiabatic and impermeable vertical barrier on the dispersion of a local aero-contaminant due to the double-diffusive Rayleigh–Benard convection inside a cubic container. Different governing parameters such as the Rayleigh number, buoyancy ratio and barrier height were analyzed for Le = 1.2 and Pr = 0.7, representing an air-contaminant mixture. The potential-vector-vorticity formalism in the three-dimensional form allowed the elimination of the pressure terms appearing in the Navier–Stokes equations. It was found that the heat and mass transfer as well as the effectiveness of the barrier in reducing contaminant dispersion are strongly influenced by the buoyancy ratio, the barrier size and the Rayleigh number. In addition, the barrier effectiveness is more than 70% for a height of half the building height.

Sign in / Sign up

Export Citation Format

Share Document