Secondary Flows and Vortex Motion in a High-Efficiency Backswept Impeller at Design and Off-Design Conditions

1990 ◽  
Vol 112 (1) ◽  
pp. 7-13 ◽  
Author(s):  
C. Hah ◽  
H. Krain
Keyword(s):  
Flow Pattern ◽  
High Efficiency ◽  
Pressure Ratio ◽  
Vortex Motion ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Optimum Shape ◽  
Discharge Velocity

The three-dimensional viscous flow field of a 4.7:1 pressure ratio backswept impeller was studied experimentally and numerically by using laser velocimetry and an advanced three-dimensional viscous code. The impeller was designed by a CAD method, and a maximum rotor efficiency of 94 percent was achieved. Both the experimental and the theoretical approach revealed comparatively smooth impeller discharge velocity profiles at all three operating conditions (design, choke, and near surge) differing widely from the well-known jet/wake-type flow pattern. The three-dimensional viscous code was used for detailed flowfield studies, i.e., secondary flows; vortex motion and tip-clearance effects were analyzed at design and off-design conditions. The comparison of experimental and numerical results indicates that the tip-clearance effect should be properly modeled to predict the impeller flow pattern properly and that optimum shape of rotor exit flow pattern can be obtained by controlling the swirling vortex motion.

scholarly journals Secondary Flows and Vortex Motion in a High-Efficiency Backswept Impeller at Design and Off-Design Conditions

1989 ◽  
Author(s):  
C. Hah ◽  
H. Krain
Keyword(s):  
Flow Pattern ◽  
High Efficiency ◽  
Pressure Ratio ◽  
Vortex Motion ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Optimum Shape ◽  
Discharge Velocity ◽  
Type Flow

The 3-D viscous flowfield of a 4.7:1 pressure ratio backswept impeller was studied experimentally and numerically by using laser velocimetry and an advanced 3-D viscous code. The impeller was designed by a CAD method, and a maximum rotor efficiency of 94% was achieved. Both the experimental and the theoretical approach revealed comparatively smooth impeller discharge velocity profiles at all three operating conditions (design, choke, and near surge) differing widely from the well-known jet/wake type flow pattern. The 3-D viscous code was used for detailed flowfield studies, i.e., secondary flows; vortex motion and tip-clearance effects were analyzed at design and off-design conditions. The comparison of experimental and numerical results indicates that the tip-clearance effect should be properly modeled to predict the impeller flow pattern properly and that optimum shape of rotor exit flow pattern can be obtained by controlling the swirling vortex motion.

Three-Dimensional Flowfields Inside a Transonic Compressor With Swept Blades

1991 ◽  
Vol 113 (2) ◽  
pp. 241-250 ◽  
Author(s):  
C. Hah ◽  
A. J. Wennerstrom
Keyword(s):  
Turbulence Modeling ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Tip Clearance Flow ◽  
Transonic Compressor ◽  
Improved Performance

The concept of swept blades for a transonic or supersonic compressor was reconsidered by Wennerstrom in the early 1980s. Several transonic rotors designed with swept blades have shown very good aerodynamic efficiency. The improved performance of the rotor is believed to be due to reduced shock strength near the shroud and better distribution of secondary flows. A three-dimensional flowfield inside a transonic rotor with swept blades is analyzed in detail experimentally and numerically. A Reynolds-averaged Navier–Stokes equation is solved for the flow inside the rotor. The numerical solution is based on a high-order upwinding relaxation scheme, and a two-equation turbulence model with a low Reynolds number modification is used for the turbulence modeling. To predict flows near the shroud properly, the tip-clearance flow also must be properly calculated. The numerical results at three different operating conditions agree well with the available experimental data and reveal various interesting aspects of shock structure inside the rotor.

scholarly journals Three-Dimensional Flowfields Inside a Transonic Compressor With Swept Blades

1990 ◽  
Author(s):  
C. Hah ◽  
A. J. Wennerstrom
Keyword(s):  
Turbulence Modeling ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Tip Clearance Flow ◽  
Transonic Compressor ◽  
Improved Performance

The concept of swept blades for a transonic or supersonic compressor was reconsidered by Wennerstrom in the early 1980s. Several transonic rotors designed with swept blades have shown very good aerodynamic efficiency. The improved performance of the rotor is believed to be due to reduced shock strength near the shroud and better distribution of secondary flows. A three-dimensional flowfield inside a transonic rotor with swept blades is analyzed in detail experimentally and numerically. A Reynolds-averaged Navier-Stokes equation is solved for the flow inside the rotor. The numerical solution is based on a high-order upwinding relaxation scheme, and a two-equation turbulence model with a low Reynolds number modification is used for the turbulence modeling. To properly predict flows near the shroud, the tip-clearance flow also must be properly calculated. The numerical results at three different operating conditions agree well with the available experimental data and reveal various interesting aspects of shock structure inside the rotor.

Three-Dimensional-Flow Theories for Axial Compressors and Turbines

1948 ◽  
Vol 159 (1) ◽  
pp. 255-268 ◽  
Author(s):  
A. D. S. Carter
Keyword(s):  
Three Dimensional ◽  
Axial Compressor ◽  
Physical Nature ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Three Dimensional Flow ◽  
Axial Compressors ◽  
Dimensional Flow ◽  
Blade Row

It has long been known that the energy losses occurring in an axial compressor or turbine cannot be fully accounted for by the skin-friction losses on the blades and annulus walls. The difference, usually termed secondary loss, is attributed to miscellaneous secondary flows which take place in the blade row. These flows both cause losses in themselves and modify the operating conditions of the individual blade sections, to the detriment of the overall performance. This lecture analyses the three-dimensional flow in axial compressors and turbines, so that, by appreciation of the factors involved, possible methods of improving the performance can readily be investigated. The origin of secondary flow is first examined for the simple case of a straight cascade. The physical nature of the flow, and theories which enable quantitative estimates to be made, are discussed at some length. Following this, the three-dimensional flow in an annulus with a stationary blade row is examined, and, among other things, the influence of radial equilibrium on the flow pattern is noted. All physical restrictions are then removed, and the major factors governing the three-dimensional flow in an actual machine are investigated as far as is possible with existing information, particular attention being paid to the influence of a non-uniform velocity profile, tip clearance, shrouding, and boundary layer displacement. Finally the various empirical factors used in design are discussed, and the relationships between them established.

Design and Off-Design Numerical Investigation of a Transonic Double-Splitter Centrifugal Compressor

2008 ◽  
Author(s):  
Michele Marconcini ◽  
Filippo Rubechini ◽  
Andrea Arnone ◽  
Seiichi Ibaraki
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Cross Sections ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Complex Flow ◽  
Flow Measurements ◽  
Vaned Diffuser

The flow field of a high pressure ratio centrifugal compressor for turbocharger applications is investigated using a three-dimensional Navier-Stokes solver. The compressor is composed of a double-splitter impeller followed by a vaned diffuser. The flow field of the transonic open-shrouded impeller is highly three-dimensional, and it is influenced by shock waves, tip leakage vortices and secondary flows. Their interactions generate complex flow structures which are convected and distorted through the impeller blades. Both steady and unsteady computations are performed in order to understand the physical mechanisms which govern the impeller flow field while the operation ranges from choke to surge. Detailed Laser Doppler Velocimetry (LDV) flow measurements are available at various cross-sections inside the impeller blades at both design and off-design operating conditions.

scholarly journals Experimental Study of a 3D Wake Decay and Secondary Flows Behind a Rotor Blade Row of a Low Speed Compressor Stage

1996 ◽  
Author(s):  
A. S. Witkowski ◽  
T. J. Chmielniak ◽  
M. D. Strozik
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Compressor Stage ◽  
Blade Row

Detailed measurements have been performed in a low pressure axial flow compressor stage to investigate the structure of the secondary flow field and the three-dimensional wake decay at different axial locations before and behind the rotor. The three dimensional flow field upstream and downstream of the rotor and on the centerline of the stator blade passage have been sampled periodically using a straight and a 90 degree triple-split fiber probe. Radial measurements at 39 radial stations were carried out at chosen axial positions in order to get the span-wise characteristics of the unsteady flow. Taking the experimental values of the unsteady flow velocities and turbulence properties, the effects of the rotor blade wake decay and secondary flow on the blade row spacing and stator passage flow at different operating conditions are discussed. For the normal operating point, the component of radial turbulent intensities in the leakage-flow mixing region is found to be much higher than the corresponding axial and tangential components. But for a higher value of the flow coefficient the relations are different.The results of the experiments show that triple-split fiber probes, straight and 90 degree measurements, combined with the ensemble average technique are a very useful method for the analysis of rotor flow in turbomachinery. Tip clearance vortex, secondary flow near the hub and radial flow in the wake, turbulent intensity and Reynolds stresses and also the decay of the rotor wakes can be obtained by this method.

scholarly journals The Design and Evaluation of a 14 Stage, 16:1 Pressure Ratio Compressor for an Industrial Gas Turbine

1996 ◽  
Author(s):  
Mohammad R. Saadatmand
Keyword(s):  
Experimental Data ◽  
Gas Turbine ◽  
Rotor Blade ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Suction Surface ◽  
Design Intent ◽  
Flow Through ◽  
Industrial Gas Turbine

The aerodynamic design process leading to the production configuration of a 14 stage, 16:1 pressure ratio compressor for the Taurus 70 gas turbine is described. The performance of the compressor is measured and compared to the design intent. Overall compressor performance at the design condition was found to be close to design intent. Flow profiles measured by vane mounted instrumentation are presented and discussed. The flow through the first rotor blade has been modeled at different operating conditions using the Dawes (1987) three-dimensional viscous code and the results are compared to the experimental data. The CFD prediction agreed well with the experimental data across the blade span, including the pile up of the boundary layer on the corner of the hub and the suction surface. The rotor blade was also analyzed with different grid refinement and the results were compared with the test data.

A State-of-the-Art CFD Setup for Axial Compressors: Details and Validation

2020 ◽  
Author(s):  
Lorenzo Cozzi ◽  
Filippo Rubechini ◽  
Andrea Arnone ◽  
Savino Depalo ◽  
Pio Astrua ◽  
...  
Keyword(s):  
Gas Turbines ◽  
Power Plants ◽  
State Of The Art ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Cfd Modelling ◽  
Axial Compressors ◽  
Surge Margin ◽  
Wide Range

Abstract The overall fraction of the power produced by renewable sources in the energy market has significantly increased in recent years. The power output of most of these clean sources is intrinsically variable. At present day and most likely in the upcoming future, due to the lack of inexpensive and reliable large energy storage systems, conventional power plants burning fossil fuels will still be part of the energy horizon. In particular, power generators able to promptly support the grid stability, such as gas turbines, will retain a strategic role. This new energy scenario is pushing gas turbine producers to improve the flexibility of their turbomachines, increasing the need for reliable numerical tools adopted to design and validate the new products also in operating conditions far from the nominal one. Especially when dealing with axial compressors, i.e. machines experiencing intense adverse pressure gradients, complex flow structures and severe secondary flows, CFD modelling of offdesign operation can be a real challenge. In this work, a state-of-the art CFD framework for RANS analysis of axial compressors is presented. The various aspects involved in the whole setup are discussed, including boundary conditions, meshing strategies, mixing planes modelling, tip clearance treatment, shroud leakages and turbulence modelling. Some experiences about the choice of these aspects are provided, derived from a long-date practice on this kind of turbomachines. Numerical results are reported for different full-scale compressors of the Ansaldo Energia fleet, covering a wide range of operating conditions. Furthermore, details about the capability of the setup to predict compressor performance and surge-margin have been added to the work. In particular, the setup surge-margin prediction has been evaluated in an operating condition in which the turbomachine experiences experimental stall. Finally, thanks to several on-field data available at different corrected speeds for operating conditions ranging from minimum to full load, a comprehensive validation of the presented numerical framework is also included in the paper.

Three-Dimensional Navier-Stokes Analysis of Turbine Rotor and Tip-Leakage Flowfield

1997 ◽  
Author(s):  
J. Luo ◽  
B. Lakshminarayana
Keyword(s):  
Three Dimensional ◽  
Turbine Rotor ◽  
Secondary Flows ◽  
Tip Clearance ◽  
Navier Stokes ◽  
Leakage Flow ◽  
Mean Flow ◽  
Tip Leakage Flow ◽  
Tip Leakage ◽  
Blade Tip

The 3-D viscous flowfield in the rotor passage of a single-stage turbine, including the tip-leakage flow, is computed using a Navier-Stokes procedure. A grid-generation code has been developed to obtain embedded H grids inside the rotor tip gap. The blade tip geometry is accurately modeled without any “pinching”. Chien’s low-Reynolds-number k-ε model is employed for turbulence closure. Both the mean-flow and turbulence transport equations are integrated in time using a four-stage Runge-Kutta scheme. The computational results for the entire turbine rotor flow, particularly the tip-leakage flow and the secondary flows, are interpreted and compared with available data. The predictions for major features of the flowfield are found to be in good agreement with the data. Complicated interactions between the tip-clearance flows and the secondary flows are examined in detail. The effects of endwall rotation on the development and interaction of secondary and tip-leakage vortices are also analyzed.

Numerical Investigations of Centrifugal Compressor Flows With Tip Leakage Using a Pressure Correction Method

1993 ◽  
Author(s):  
A. Tourlidakis ◽  
R. L. Elder
Keyword(s):  
Flow Pattern ◽  
High Speed ◽  
Stokes Equations ◽  
Correction Method ◽  
Secondary Flows ◽  
Tip Clearance ◽  
Physical Models ◽  
Wake Flow ◽  
Operating Characteristics ◽  
Pressure Correction

In this paper, a three-dimensional computational model for the solution of the time-averaged Navier-Stokes equations, based on a pressure correction method and the k-ε turbulence model, is presented and implemented for the viscous flow modelling through a series of centrifugal compressors. Theoretical calculations with the current fully elliptic method are carried out and the results are compared critically with available experimental data and with results from other computational models. A radial and two backswept high-speed subsonic compressors with different geometrical and operating characteristics are analysed at design and off-design conditions. In all cases, a wake flow pattern is evident and strong secondary flows are discerned. The tip clearance effects on the relative flow pattern are found to be important and are appropriately simulated. The predictive capability of the current flow model is judged to be encouraging taking into consideration the limitations of the physical models and the numerical schemes involved in the computations.

Sign in / Sign up

Export Citation Format

Share Document