Tensioned Metastable Fluid Detectors for Spectrometric Radon–Progeny Detection and AARST-NRPP Standard Qualification

2020 ◽  
Vol 6 (4) ◽  
Author(s):  
Mitch P. Hemesath ◽  
Brian C. Archambault ◽  
Nathan M. Boyle ◽  
Rusi P. Taleyarkhan
Keyword(s):  
Background Radiation ◽  
Cost Effective ◽  
Photon Radiation ◽  
Sensor Technology ◽  
Radon Progeny ◽  
First Order ◽  
Test Parameters ◽  
Wide Range ◽  
Spectroscopic Identification ◽  
Background Photon

Abstract This paper describes how the tensioned metastable fluid detector (TMFD) sensor technology was successfully configured and qualified for efficient, accurate, spectroscopic, and cost-effective radon and progeny spectroscopic detection alongside meeting/exceeding the standards set by the American Association of Radon Scientists and Technologists-National Radon Proficiency Program (AARST-NRPP) Device Evaluation Program (DEP). The DEP represents addressing of a challenging test matrix that assesses a radon collection and measurement device's performance over a variety of functional parameters and environmental conditions. Qualification test conditions covered in this study included performance vetting of the centrifugally tensioned metastable fluid detector (CTMFD) technology under a wide range of temperatures, noncondensing relative humidity (RH) levels, condensing conditions, atmospheric pressures, background photon radiation, nonionizing external electromagnetic (EM) fields, shock and vibration, and air movement. Of all these parameters, only the ambient temperature played a first-order role on radon collection; for this reason, a dynamic compensation algorithm was developed and successfully validated. The remaining AARST-NRPP test parameters were found to have negligible affects. In comparison to state-of-art radon detector systems, the resulting radon specific CTMFD (R-CTMFD) sensor system and protocol are shown to provide for superior sensitivity along with spectroscopic identification of radon–progeny alpha emitters while remaining 100% blind to interfering gamma–beta background radiation.

scholarly journals Functional Polymers Structures for (Bio)Sensing Application—A Review

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1154 ◽  
Author(s):  
Kamila Spychalska ◽  
Dorota Zając ◽  
Sylwia Baluta ◽  
Kinga Halicka ◽  
Joanna Cabaj
Keyword(s):  
Technology Development ◽  
Polymeric Materials ◽  
Cost Effective ◽  
Medical Diagnostics ◽  
Biologically Active ◽  
Sensor Technology ◽  
Microporous Polymer ◽  
Wide Range ◽  
Sensitivity And Selectivity ◽  
Analytical Tools

In this review we present polymeric materials for (bio)sensor technology development. We focused on conductive polymers (conjugated microporous polymer, polymer gels), composites, molecularly imprinted polymers and their influence on the design and fabrication of bio(sensors), which in the future could act as lab-on-a-chip (LOC) devices. LOC instruments enable us to perform a wide range of analysis away from the stationary laboratory. Characterized polymeric species represent promising candidates in biosensor or sensor technology for LOC development, not only for manufacturing these devices, but also as a surface for biologically active materials’ immobilization. The presence of biological compounds can improve the sensitivity and selectivity of analytical tools, which in the case of medical diagnostics is extremely important. The described materials are biocompatible, cost-effective, flexible and are an excellent platform for the anchoring of specific compounds.

2D Color-Intensity Representation of Ultrasonic Thickness Gauge Measurements

2020 ◽  
pp. 1192-1198
Author(s):  
M.S. Mohammad ◽  
Tibebe Tesfaye ◽  
Kim Ki-Seong
Keyword(s):  
Cost Effective ◽  
The Other ◽  
Thickness Gauge ◽  
Color Intensity ◽  
Digital Readout ◽  
Flat Surfaces ◽  
Video Cameras ◽  
Wide Range ◽  
Cost Effective Alternative ◽  
Ultrasonic Thickness

Ultrasonic thickness gauges are easy to operate and reliable, and can be used to measure a wide range of thicknesses and inspect all engineering materials. Supplementing the simple ultrasonic thickness gauges that present results in either a digital readout or as an A-scan with systems that enable correlating the measured values to their positions on the inspected surface to produce a two-dimensional (2D) thickness representation can extend their benefits and provide a cost-effective alternative to expensive advanced C-scan machines. In previous work, the authors introduced a system for the positioning and mapping of the values measured by the ultrasonic thickness gauges and flaw detectors (Tesfaye et al. 2019). The system is an alternative to the systems that use mechanical scanners, encoders, and sophisticated UT machines. It used a camera to record the probe’s movement and a projected laser grid obtained by a laser pattern generator to locate the probe on the inspected surface. In this paper, a novel system is proposed to be applied to flat surfaces, in addition to overcoming the other limitations posed due to the use of the laser projection. The proposed system uses two video cameras, one to monitor the probe’s movement on the inspected surface and the other to capture the corresponding digital readout of the thickness gauge. The acquired images of the probe’s position and thickness gauge readout are processed to plot the measured data in a 2D color-coded map. The system is meant to be simpler and more effective than the previous development.

The Future of Plasma-Based Surface Engineering Techniques in Tribology (Keynote)

2005 ◽  
Author(s):  
Allan Matthews ◽  
Adrian Leyland
Keyword(s):  
Surface Engineering ◽  
Performance Enhancement ◽  
Bulk Material ◽  
Cost Savings ◽  
Cost Effective ◽  
Ceramic Coatings ◽  
Performance Improvements ◽  
Treatment Techniques ◽  
Wide Range ◽  
Macro Scale

Over the past twenty years or so, there have been major steps forward both in the understanding of tribological mechanisms and in the development of new coating and treatment techniques to better “engineer” surfaces to achieve reductions in wear and friction. Particularly in the coatings tribology field, improved techniques and theories which enable us to study and understand the mechanisms occurring at the “nano”, “micro” and “macro” scale have allowed considerable progress to be made in (for example) understanding contact mechanisms and the influence of “third bodies” [1–5]. Over the same period, we have seen the emergence of the discipline which we now call “Surface Engineering”, by which, ideally, a bulk material (the ‘substrate’) and a coating are combined in a way that provides a cost-effective performance enhancement of which neither would be capable without the presence of the other. It is probably fair to say that the emergence and recognition of Surface Engineering as a field in its own right has been driven largely by the availability of “plasma”-based coating and treatment processes, which can provide surface properties which were previously unachievable. In particular, plasma-assisted (PA) physical vapour deposition (PVD) techniques, allowing wear-resistant ceramic thin films such as titanium nitride (TiN) to be deposited on a wide range of industrial tooling, gave a step-change in industrial productivity and manufactured product quality, and caught the attention of engineers due to the remarkable cost savings and performance improvements obtained. Subsequently, so-called 2nd- and 3rd-generation ceramic coatings (with multilayered or nanocomposite structures) have recently been developed [6–9], to further extend tool performance — the objective typically being to increase coating hardness further, or extend hardness capabilities to higher temperatures.

scholarly journals Gamma models for estimating the odds ratio for a skewed biomarker measured in pools and subject to errors

Biostatistics ◽  
2019 ◽  
Author(s):  
Dane R Van Domelen ◽  
Emily M Mitchell ◽  
Neil J Perkins ◽  
Enrique F Schisterman ◽  
Amita K Manatunga ◽  
...  
Keyword(s):  
Odds Ratio ◽  
Adjusted Odds Ratio ◽  
Lower Cost ◽  
Cost Effective ◽  
Ratio Estimation ◽  
Statistical Efficiency ◽  
Function Model ◽  
Processing Error ◽  
Wide Range ◽  
Pooled Samples

SUMMARYMeasuring a biomarker in pooled samples from multiple cases or controls can lead to cost-effective estimation of a covariate-adjusted odds ratio, particularly for expensive assays. But pooled measurements may be affected by assay-related measurement error (ME) and/or pooling-related processing error (PE), which can induce bias if ignored. Building on recently developed methods for a normal biomarker subject to additive errors, we present two related estimators for a right-skewed biomarker subject to multiplicative errors: one based on logistic regression and the other based on a Gamma discriminant function model. Applied to a reproductive health dataset with a right-skewed cytokine measured in pools of size 1 and 2, both methods suggest no association with spontaneous abortion. The fitted models indicate little ME but fairly severe PE, the latter of which is much too large to ignore. Simulations mimicking these data with a non-unity odds ratio confirm validity of the estimators and illustrate how PE can detract from pooling-related gains in statistical efficiency. These methods address a key issue associated with the homogeneous pools study design and should facilitate valid odds ratio estimation at a lower cost in a wide range of scenarios.

scholarly journals Sensing of Nickel(II) Ions by Immobilizing Ligands and Using Different SPEs

2021 ◽  
Vol 6 (1) ◽  
pp. 2
Author(s):  
Liliana Anchidin-Norocel ◽  
Sonia Amariei ◽  
Gheorghe Gutt
Keyword(s):  
Bismuth Oxide ◽  
Human Population ◽  
Raw Materials ◽  
Sensor Technology ◽  
Cyclic Voltammogram ◽  
Accurate Analysis ◽  
Nickel Allergy ◽  
Nickel Ions ◽  
Practical Applications ◽  
Wide Range

The aim of this paper is the development of a sensor for the quantification of nickel ions in food raw materials and foods. It is believed that about 15% of the human population suffers from nickel allergy. In addition to digestive manifestations, food intolerance to nickel may also have systemic manifestations, such as diffuse dermatitis, diffuse itching, fever, rhinitis, headache, altered general condition. Therefore, it is necessary to control this content of nickel ions for the health of the human population by developing a new method that offers the advantages of a fast, not expensive, in situ, and accurate analysis. For this purpose, bismuth oxide-screen-printed electrodes (SPEs) and graphene-modified SPEs were used with a very small amount of dimethylglyoxime and amino acid L-histidine that were deposited. A potentiostat that displays the response in the form of a cyclic voltammogram was used to study the electrochemical properties of nickel standard solution with different concentrations. The results were compared and the most sensitive sensor proved to be bismuth oxide-SPEs with dimethylglyoxime (Bi2O3/C-dmgH2) with a linear response over a wide range (0.1–10 ppm) of nickel concentrations. Furthermore, the sensor shows excellent selectivity in the presence of common interfering species. The Bi2O3/C-dmgH2 sensor showed good viability for nickel analysis in food samples (cocoa, spinach, cabbage, and red wine) and demonstrated significant advancement in sensor technology for practical applications.

scholarly journals Sporulation in solventogenic and acetogenic clostridia

2021 ◽  
Author(s):  
Mamou Diallo ◽  
Servé W. M. Kengen ◽  
Ana M. López-Contreras
Keyword(s):  
Current Knowledge ◽  
Carbon Sources ◽  
Cost Effective ◽  
Biotechnological Production ◽  
Key Points ◽  
Wide Range ◽  
Potential Applications ◽  
A Cell ◽  
Sporulation Initiation ◽  
Solventogenic Clostridia

AbstractThe Clostridium genus harbors compelling organisms for biotechnological production processes; while acetogenic clostridia can fix C1-compounds to produce acetate and ethanol, solventogenic clostridia can utilize a wide range of carbon sources to produce commercially valuable carboxylic acids, alcohols, and ketones by fermentation. Despite their potential, the conversion by these bacteria of carbohydrates or C1 compounds to alcohols is not cost-effective enough to result in economically viable processes. Engineering solventogenic clostridia by impairing sporulation is one of the investigated approaches to improve solvent productivity. Sporulation is a cell differentiation process triggered in bacteria in response to exposure to environmental stressors. The generated spores are metabolically inactive but resistant to harsh conditions (UV, chemicals, heat, oxygen). In Firmicutes, sporulation has been mainly studied in bacilli and pathogenic clostridia, and our knowledge of sporulation in solvent-producing or acetogenic clostridia is limited. Still, sporulation is an integral part of the cellular physiology of clostridia; thus, understanding the regulation of sporulation and its connection to solvent production may give clues to improve the performance of solventogenic clostridia. This review aims to provide an overview of the triggers, characteristics, and regulatory mechanism of sporulation in solventogenic clostridia. Those are further compared to the current knowledge on sporulation in the industrially relevant acetogenic clostridia. Finally, the potential applications of spores for process improvement are discussed.Key Points• The regulatory network governing sporulation initiation varies in solventogenic clostridia.• Media composition and cell density are the main triggers of sporulation.• Spores can be used to improve the fermentation process.

Formation of Periodical Sub-Micron Sized Structures on Silicon by Interfered Nanosecond Laser Pulses

2010 ◽  
Vol 97-101 ◽  
pp. 3803-3806
Author(s):  
Yong Xiang Hu ◽  
Heng Zhang ◽  
Zheng Qiang Yao
Keyword(s):  
Cost Effective ◽  
Laser Pulses ◽  
Laser Beams ◽  
Nanosecond Laser ◽  
Effective Technique ◽  
First Order ◽  
Direct Fabrication ◽  
Cost Effective Technique ◽  
Nanosecond Laser Pulses ◽  
Micro Structuring

Laser interference micro-structuring is a relatively efficient and cost-effective technique for fabricating periodical micro-nano-structuring surfaces. The direct fabrication of sub-micron sized dot array on silicon was performed by four interfering nanosecond laser beams with a diffractive beam splitter. The mechanism to form the dot array was analyzed and it was found that the obtained conical dot array had a negative shape of the interference pattern of four laser beams. A second-order peak between two first-order peaks also occurred due to the liquid-solid expansion.

scholarly journals Measurement and Implications of the Cosmic Microwave Background Spectrum

1996 ◽  
Vol 168 ◽  
pp. 17-29
Author(s):  
John C. Mather
Keyword(s):  
Background Radiation ◽  
Far Infrared ◽  
Big Bang ◽  
Scale Invariant ◽  
Background Spectrum ◽  
Nasa Goddard Space ◽  
Wide Range ◽  
Infrared Background ◽  
Microwave Radiometers ◽  
The Big Bang

The Cosmic Background Explorer (COBE) was developed by NASA Goddard Space Flight Center to measure the diffuse infrared and microwave radiation from the early universe. It also measured emission from nearby sources such as the stars, dust, molecules, atoms, ions, and electrons in the Milky Way, and dust and comets in the Solar System. It was launched 18 November 1989 on a Delta rocket, carrying one microwave instrument and two cryogenically cooled infrared instruments. The Far Infrared Absolute Spectrophotometer (FIRAS) mapped the sky at wavelengths from 0.01 to 1 cm, and compared the CMBR to a precise blackbody. The spectrum of the CMBR differs from a blackbody by less than 0.03%. The Differential Microwave Radiometers (DMR) measured the fluctuations in the CMBR originating in the Big Bang, with a total amplitude of 11 parts per million on a 10° scale. These fluctuations are consistent with scale-invariant primordial fluctuations. The Diffuse Infrared Background Experiment (DIRBE) spanned the wavelength range from 1.2 to 240 μm and mapped the sky at a wide range of solar elongation angles to distinguish foreground sources from a possible extragalactic Cosmic Infrared Background Radiation (CIBR). In this paper we summarize the COBE mission and describe the results from the FIRAS instrument. The results from the DMR and DIRBE were described by Smoot and Hauser at this Symposium.

scholarly journals Achieving Viral Suppression in 90% of People Living With Human Immunodeficiency Virus on Antiretroviral Therapy in Low- and Middle-Income Countries: Progress, Challenges, and Opportunities

2018 ◽  
Vol 66 (10) ◽  
pp. 1487-1491 ◽  
Author(s):  
Jean B Nachega ◽  
Nadia A Sam-Agudu ◽  
Lynne M Mofenson ◽  
Mauro Schechter ◽  
John W Mellors
Keyword(s):  
Human Immunodeficiency Virus ◽  
Viral Suppression ◽  
Cost Effective ◽  
Term Treatment ◽  
Middle Income ◽  
Middle Income Countries ◽  
Long Term Treatment ◽  
Wide Range ◽  
Immunodeficiency Virus ◽  
Low And Middle Income

Abstract Although significant progress has been made, the latest data from low- and middle-income countries show substantial gaps in reaching the third “90%” (viral suppression) of the UNAIDS 90-90-90 goals, especially among vulnerable and key populations. This article discusses critical gaps and promising, evidence-based solutions. There is no simple and/or single approach to achieve the last 90%. This will require multifaceted, scalable strategies that engage people living with human immunodeficiency virus, motivate long-term treatment adherence, and are community-entrenched and ‑supported, cost-effective, and tailored to a wide range of global communities.

A method for correcting acoustic finite-difference amplitudes for elastic effects

Geophysics ◽  
2014 ◽  
Vol 79 (4) ◽  
pp. T243-T255 ◽  
Author(s):  
James W. D. Hobro ◽  
Chris H. Chapman ◽  
Johan O. A. Robertsson
Keyword(s):  
Wave Equation ◽  
Finite Difference ◽  
Effective Means ◽  
Cost Effective ◽  
P Wave ◽  
S Waves ◽  
Velocity Models ◽  
Acoustic Simulation ◽  
Wide Range ◽  
Elastic Simulation

We present a new method for correcting the amplitudes of arrivals in an acoustic finite-difference simulation for elastic effects. In this method, we selectively compute an estimate of the error incurred when the acoustic wave equation is used to approximate the behavior of the elastic wave equation. This error estimate is used to generate an effective source field in a second acoustic simulation. The result of this second simulation is then applied as a correction to the original acoustic simulation. The overall cost is approximately twice that of an acoustic simulation but substantially less than the cost of an elastic simulation. Because both simulations are acoustic, no S-waves are generated, so dispersed converted waves are avoided. We tested the characteristics of the method on a simple synthetic model designed to simulate propagation through a strong acoustic impedance contrast representative of sedimentary geology. It corrected amplitudes to high accuracy for reflected arrivals over a wide range of incidence angles. We also evaluated results from simulations on more complex models that demonstrated that the method was applicable in realistic sedimentary models containing a wide range of seismic contrasts. However, its accuracy was reduced for wide-angle reflections from very high impedance contrasts such as a shallow top-salt interface. We examined the influence of modeling at coarse grid resolutions, in which converted S-waves in the equivalent elastic simulation are dispersed. These results provide some validation for the accuracy of the method when applied using finite-difference grids designed for acoustic modeling. The method appears to offer a cost-effective means of modeling elastic amplitudes for P-wave arrivals in a useful range of velocity models. It has several potential applications in imaging and inversion.

Sign in / Sign up

Export Citation Format

Share Document