Improvement in Recuperative Gas Cycles by Means of a Heat Generator Partly By-Passing the Recuperator: Application to Open and Closed Cycles and to Various Kinds of Energy

1979 ◽  
Author(s):  
Z. P. Tilliette ◽  
B. Pierre
Keyword(s):  
Power Plants ◽  
High Efficiency ◽  
Primary Energy ◽  
Operating Conditions ◽  
Heat Output ◽  
Medium Temperature ◽  
Heat Generator ◽  
High Temperature Process ◽  
Temperature Heat ◽  
Operation Flexibility

A particular arrangement applicable to open or closed recuperative gas cycles, consisting of a heat generator partly by-passing the low pressure side of the recuperator, is proven to enhance the advantages of gas cycles for energy production. In this way, the cogeneration of both power with high efficiency owing to the recuperator and high temperature process heat becomes possible and economically attractive. Furthermore, additional possibilities appear for power generation by combined gas and steam or ammonia cycles. In any case, the overall utilitization coefficient of the primary energy is increased and the combined production of low or medium temperature heat can also be improved. The great operation flexibility of the system for combined energy generation is worth being emphasized: the by-pass arrangement involves no significant change in the operating conditions of the main turbocompressor as the heat output varies. Applications of this arrangement are made to open and closed gas cycle power plants using fossil, nuclear and solar energies. The overall heat conversion efficiency is tentatively estimated in order to appreciate the energy conversion capability of the investigated power plants.

"Recent Patents on the Triboelectrostatic Separation of Fly Ash"

2019 ◽  
Vol 13 ◽  
Author(s):  
Haisheng Li ◽  
Wenping Wang ◽  
Yinghua Chen ◽  
Xinxi Zhang ◽  
Chaoyong Li
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
High Efficiency ◽  
Separation Efficiency ◽  
High Reliability ◽  
Operating Conditions ◽  
Security Requirements ◽  
Unburned Carbon ◽  
Efficient Operation ◽  
Triboelectrostatic Separation

Background: The fly ash produced by coal-fired power plants is an industrial waste. The environmental pollution problems caused by fly ash have been widely of public environmental concern. As a waste of recoverable resources, it can be used in the field of building materials, agricultural fertilizers, environmental materials, new materials, etc. Unburned carbon content in fly ash has an influence on the performance of resource reuse products. Therefore, it is the key to remove unburned carbon from fly ash. As a physical method, triboelectrostatic separation technology has been widely used because of obvious advantages, such as high-efficiency, simple process, high reliability, without water resources consumption and secondary pollution. Objective: The related patents of fly ash triboelectrostatic separation had been reviewed. The structural characteristics and working principle of these patents are analyzed in detail. The results can provide some meaningful references for the improvement of separation efficiency and optimal design. Methods: Based on the comparative analysis for the latest patents related to fly ash triboelectrostatic separation, the future development is presented. Results: The patents focused on the charging efficiency and separation efficiency. Studies show that remarkable improvements have been achieved for the fly ash triboelectrostatic separation. Some patents have been used in industrial production. Conclusion: According to the current technology status, the researches related to process optimization and anti-interference ability will be beneficial to overcome the influence of operating conditions and complex environment, and meet system security requirements. The intelligent control can not only ensure the process continuity and stability, but also realize the efficient operation and management automatically. Meanwhile, the researchers should pay more attention to the resource utilization of fly ash processed by triboelectrostatic separation.

scholarly journals Combined Cycles Permit the Most Environmentally Benign Conversion of Fossil Fuels to Electricity

1990 ◽  
Author(s):  
Guenther Haupt ◽  
John S. Joyce ◽  
Konrad Kuenstle
Keyword(s):  
Environmental Impact ◽  
Power Plants ◽  
Fossil Fuels ◽  
Coal Gasification ◽  
High Efficiency ◽  
Waste Heat ◽  
Primary Energy ◽  
Combined Cycle ◽  
Point Of View ◽  
Steam Boiler

The environmental impact of unfired combined-cycle blocks of the GUD® type is compared with that of equivalent reheat steam boiler/turbine units. The outstandingly high efficiency of GUD blocks not only conserves primary-energy resources, but also commensurately reduces undesirable emissions and unavoidable heat rejection to the surroundings. In addition to conventional gas or oil-fired GUD blocks, integrated coal-gasification combined-cycle (ICG-GUD) blocks are investigated from an ecological point of view so as to cover the whole range of available fossil fuels. For each fuel and corresponding type of GUD power plant the most appropriate conventional steam-generating unit of most modern design is selected for comparison purposes. In each case the relative environmental impact is stated in the form of quantified emissions, effluents and waste heat, as well as of useful byproducts and disposable solid wastes. GUD blocks possess the advantage that they allow primary measures to be taken to minimize the production of NOx and SOx, whereas both have to be removed from the flue gases of conventional steam stations by less effective and desirable, albeit more expensive secondary techniques, e.g. flue-gas desulfurization and DENOX systems. In particular, the comparison of CO2 release reveals a significantly lower contribution by GUD blocks to the greenhouse effect than by other fossil-fired power plants.

Development of High Efficiency MCFC/GT Hybrid Power Generation System

2003 ◽  
Author(s):  
T. Watanabe ◽  
Y. Izaki ◽  
Y. Mugikura ◽  
M. Yoshikawa ◽  
H. Morita ◽  
...  
Keyword(s):  
Power Plants ◽  
High Efficiency ◽  
Low Voltage ◽  
Operating Conditions ◽  
Performance Estimation ◽  
Estimation Methods ◽  
Central Research ◽  
Molten Carbonate ◽  
Initial Development ◽  
Hybrid Power

A number of cycle simulations, which are applied by Molten Carbonate Fuel Cell (MCFC) power plants combined with gas/steam turbines, prove that it is possible to design very highly efficient power plants. However, the stack performance, the operation technology and the performance estimation technology have not yet been established during the initial development stages. The Central Research Institute of Electric Power Industry (CRIEPI) has performed many cell and stack tests and has evaluated the performance under various operating conditions. The operation, performance analysis and estimation methods have been developed for various pressure ranges. Therefore, the accuracy of the plant power estimation has been improved immensely. CRIEPI has also proposed the application of a Li/Na electrolyte instead of a Li/K to achieve higher voltages and a longer stack life. A 10 kW-class short stack consisting of ten 1-m2 cells with a Li/Na electrolyte was operated for more than 10,000 hours, and a very low voltage decay rate was measured during the governmental program. Based on these accomplishments, field tests on small MCFC/GT (gas turbine) hybrid power plants with capacities of several hundred kW will be initiated in Japan throughout the next years.

Application of Recuperative Gas Cycles with a Bypass Heat Generator to Solar Energy Power Plants

1980 ◽  
Vol 102 (1) ◽  
pp. 153-159
Author(s):  
Z. P. Tilliette ◽  
B. Pierre
Keyword(s):  
Solar Energy ◽  
Heat Source ◽  
Power Plants ◽  
Energy Conversion Efficiency ◽  
Operating Conditions ◽  
Heat Generator ◽  
Combined Cycles ◽  
Flexible Plant ◽  
Favorable Conditions ◽  
Solar Receiver

Gas cycles are being studied for solar energy power plants on account of the attractive prospects they offer for an efficient heat source utilization. By using a particular arrangement applicable to open or closed recuperative gas cycles, consisting of a heat generator partly bypassing the low pressure side of the recuperator, further improvements can be effected in gas turbine systems. They result in favorable conditions for power and high temperature heat cogeneration, for combined gas and steam cycles, and for flexible plant operation. Specific aspects of solar energy are investigated. They mainly concern variations in operating conditions, energy storage, energy conversion efficiency and combined cycles. Applications are made to open and closed cycle power plants. As the combination of a solar receiver with a fossil-fired auxiliary heat source is considered, fossil-fired power plants with an auxiliary solar heating are examined.

scholarly journals Experimental Assessment of Energy Performance and Emissions of a Residential Microcogenerator

2014 ◽  
Vol 1 (2) ◽  
pp. 48 ◽  
Author(s):  
Giovanni Angrisani ◽  
Carlo Roselli ◽  
Maurizio Sasso ◽  
Peter Tzscheutschler
Keyword(s):  
Energy Saving ◽  
High Efficiency ◽  
Thermal Power ◽  
Experimental Tests ◽  
Energy Performance ◽  
Primary Energy ◽  
Economic Feasibility ◽  
Operating Conditions ◽  
Hot Water ◽  
Test Facility

Microcogeneration can guarantee sensible primary energy savings and greenhouse gas emissions reductions in the residential sector. In this paper, the results of experimental tests carried out on a microcogenerator (5.5 kW electric power and 14.8 kW thermal power) based on a natural gas fuelled internal combustion engine, integrated with a condensing boiler, have been analyzed. Tests have been performed out at Institute for Energy Economy and Application Technology (IfE) of Technical University of Munich (Germany). The test facility allowed to simulate the thermal energy requirements of a real residential application, represented by a Multi Family House consisting of 10 apartments, and to evaluate the energy flows of the conversion devices in actual operating conditions. Four type days, characteristic of Mediterranean climatic conditions, have been used to define space heating and domestic hot water user’s requirements. Experimental tests have been performed to implement energy and environmental analysis, comparing the system consisting of cogenerator and integration boiler with a reference system. Results showed that the former can achieve a primary energy saving of about 6%, and CO2 equivalent emissions reduction of about 12%. Finally, the algorithm defined by the European Directive on the promotion of high efficiency cogeneration has been implemented; it demonstrated that the primary energy saving is well above the limit value prescribed by the Directive. Therefore the cogeneration plant can access support mechanisms that can help to achieve the economic feasibility of the system, besides energy and environmental benefits.

Generalized Regeneration Theory and its Energy Saving and Emission Reduction Effects on Coal-Fired Power Generation

2016 ◽  
Author(s):  
Weizhong Feng
Keyword(s):  
Power Plants ◽  
High Efficiency ◽  
Steam Pressure ◽  
Combustion Efficiency ◽  
Operating Conditions ◽  
Low Oxygen ◽  
Material Technology ◽  
Boiler Operation ◽  
Combustion Technology ◽  
Reduce Emissions

Concerns related to global warming and environmental pollution concerns have pressured coal-fired power plants to improve efficiency and reduce emissions. However, the conventional efficiency improvement methods — increasing steam pressure and temperature and reducing condenser pressure are limited by material technology and the temperature of the available cooling medium. The next step for increasing efficiency would be to add additional reheat or regenerative cycles, but this is not feasible for existing plants. In addition, as the share of renewable energy and the grid’s demands on the coal-fired power plants increases, China’s coal-fired units are faced with more and tougher challenges, including large peak-valley gaps, frequent startups and shutdowns and cost pressures. As a result, the boiler combustion efficiency decreases and incidents such as furnace explosions, aggravation and collapsing of slag and burning of facilities located downstream of the economizer become more frequent. To address these problems, the generalized regeneration theory has been proposed and a series of related technologies have been developed, providing a new approach for not only improving the efficiency of coal-fired power plants, but also resulted in boiler operation that is cleaner and safer. These technologies which include anew boiler startup technology, the high efficiency combustion and low emission technology under low load and the low oxygen, and a low NOx and high efficiency combustion technology under high load have been implemented successfully in the Shanghai Waigaoqiao No. 3 power plant. By improving the utilization of turbine extraction and reducing the exhaust loss, these innovative technologies greatly improve the environmental performance, efficiency and safety of the units in various operating conditions. In addition, improvements have been made in the boilers ability to adapt to changing coal supplies, particularly for coal with high slagging tendencies and high moisture content.

scholarly journals Improvement of efficiency of detecting vacuum leakages by using combined methods

Vestnik IGEU ◽  
2021 ◽  
pp. 13-21
Author(s):  
A.D. Vodeniktov ◽  
V.G. Vlasenko ◽  
N.D. Chichirova
Keyword(s):  
Steam Turbine ◽  
Thermal Imaging ◽  
Power Plants ◽  
High Efficiency ◽  
Ultrasonic Method ◽  
Cost Effective ◽  
Steam Pressure ◽  
Operating Conditions ◽  
Vacuum System ◽  
Imaging Method

Trouble-free operation of the main equipment of heat power plants is determined by the performance reliability of condensing units. High air density of the vacuum system provides cost-effective and reliable operation. One of the reasons that causes an increase of the exhaust steam pressure compared to the standard pressure, in addition to contamination of the condensers cooling surface, is the high amount of air inflow through vacuum system leakiness. Exceeding the amount of atmospheric air inflow into the vacuum system above the standard value, both reduces the available heat energy and make worse the deaeration capacity of the condenser. This results in saturation of the full-flow condensate with oxygen and intensification of corrosion processes. Various methods varying in both cost and efficiency are used to find air inflow location. Nowadays, the issue of choosing a method to detect even the most insignificant air inflow location of the vacuum system of a steam turbine remains open. In the current study, the authors have used the thermal-imaging method to detect air inflow location due to local hypocooling, and the ultrasonic method, which is based on the detection of ultrasound created by gas flows. The authors have proved the necessity to use several different in concept methods to find leakage locations in a vacuum system. It is established that traditional methods to find vacuum system leaks do not allow to eliminate excess leaks. In-service monitoring confirms 87 % reduction of the amount of vacuum leaks. The studies show high efficiency of sharing both thermal imaging and ultrasonic methods to detect air inflow location in a vacuum system. According to the operating conditions of the available equipment, as well as the personnel qualifications, the results obtained make it possible to choose the most optimal way in terms of financial and time expenses to find vacuum leakage location in the vacuum system of a steam turbine.

Effect of Impurities on Compressor and Cooler in Supercritical CO2 Cycles

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Ladislav Vesely ◽  
K. R. V. Manikantachari ◽  
Subith Vasu ◽  
Jayanta Kapat ◽  
Vaclav Dostal ◽  
...  
Keyword(s):  
Critical Point ◽  
Carbon Capture ◽  
Nuclear Power ◽  
Power Plants ◽  
High Efficiency ◽  
Waste Heat ◽  
Operating Conditions ◽  
Working Fluid ◽  
Compressor Inlet ◽  
Almost All

With the increasing demand for electric power, the development of new power generation technologies is gaining increased attention. The supercritical carbon dioxide (S-CO2) cycle is one such technology, which has relatively high efficiency, compactness, and potentially could provide complete carbon capture. The S-CO2 cycle technology is adaptable for almost all of the existing heat sources such as solar, geothermal, fossil, nuclear power plants, and waste heat recovery systems. However, it is known that optimal combinations of operating conditions, equipment, working fluid, and cycle layout determine the maximum achievable efficiency of a cycle. Within an S-CO2 cycle, the compression device is of critical importance as it is operating near the critical point of CO2. However, near the critical point, the thermo-physical properties of CO2 are highly sensitive to changes of pressure and temperature. Therefore, the conditions of CO2 at the compressor inlet are critical in the design of such cycles. Also, the impurity species diluted within the S-CO2 will cause deviation from an ideal S-CO2 cycle as these impurities will change the thermodynamic properties of the working fluid. Accordingly, the current work examines the effects of different impurity compositions, considering binary mixtures of CO2 and He, CO, O2, N2, H2, CH4, or H2S on various S-CO2 cycle components. The second part of the study focuses on the calculation of the basic cycles and component efficiencies. The results of this study will provide guidance and define the optimal composition of mixtures for compressors and coolers.

Efficiency Improvement Options for Municipal Waste-Fired Power Generation—Recent Development Activities in Japan: A Review

1995 ◽  
Vol 209 (2) ◽  
pp. 81-100 ◽  
Author(s):  
H Haneda
Keyword(s):  
Power Plants ◽  
High Efficiency ◽  
Primary Energy ◽  
Environmental Conservation ◽  
Municipal Waste ◽  
Current Status ◽  
Efficiency Improvement ◽  
Effective Utilization ◽  
Global Environmental ◽  
Technical Issues

The development of high-efficiency municipal waste-fired power plants, although not yet developed for practical use because of the technical difficulties involved, has recently come to be considered quite important, reflecting strong public demand for conservation of the global environment and preservation of energy resources. Development of such plants is now being actively promoted in various national projects in Japan. This paper first reviews the current status and technical issues concerning (a) municipal waste disposal plants and (b) municipal waste-fired power plants in Japan. Then each of the three approaches that are currently being proposed and vigorously promoted as national projects in Japan for realizing high-efficiency municipal waste-fired power plants is discussed. Although a high percentage of the municipal waste in Japan is incinerated, only a relatively small amount of electricity is generated at present. The paper shows that increasing the proportion of waste used to provide electricity could lead to savings of up to 30 per cent of the annual cost consumption in Japan, with accompanying substantial saving in CO2 emissions. The more effective utilization of municipal waste as an energy source would thus have a significant effect on global environmental conservation and in saving primary energy sources.

scholarly journals Optimal Design of a Ljungström Turbine for ORC Power Plants: From a 2D model to a 3D CFD Validation

2020 ◽  
Vol 5 (3) ◽  
pp. 19
Author(s):  
Umberto Coronetta ◽  
Enrico Sciubba
Keyword(s):  
Power Plants ◽  
Volume Flow Rate ◽  
Electric Energy ◽  
Operating Conditions ◽  
Working Fluid ◽  
Cfd Validation ◽  
Medium Temperature ◽  
Thermo Electric ◽  
Water Steam ◽  
Radial Outflow

In the last few years, waste-energy recovery systems based on the Organic Rankine Cycle (ORC) have gained increased attention in the global energy market as a versatile and sustainable technology for thermo-electric energy conversion from low-to-medium temperature sources, up to 350 °C. For a long time, water has been the only working fluid commercially adopted in powerplants: axial and, for smaller machines, radial inflow turbines have been the preferred expanders since their gulp capacity matches the ρ-T curve of water steam. The density of most organic compounds displays extremely large variations during the expansion (and the volume flow rate correspondingly increases along the machine channels), so that Radial Outflow Turbines (ROTs) have been recently considered instead of traditional solutions. This work proposes a two-dimensional inviscid model for the stage optimization of a counter-rotating ROT, known as the Ljungström turbine. The study starts by considering five different working fluids that satisfy both the gulp requirements of the turbine and the hot source characteristics. On the basis of a limited number of geometric assumptions and for a fixed set of operating conditions, different kinematic parameters are optimized to obtain the most efficient cascade configuration. Moreover, as shown in the conclusions, the most efficient blade profile leads to higher friction losses, making further investigation regarding the best configuration necessary.

Sign in / Sign up

Export Citation Format

Share Document