Juice Debittering: Basic Science, Optimization, and Recent Advances

2012 ◽  
Author(s):  
Fred Ghanem
Keyword(s):  
Strong Influence ◽  
Research Work ◽  
High Capacity ◽  
Citrus Fruits ◽  
Base Matrix ◽  
Food Applications ◽  
Exchange Resins ◽  
Synthetic Adsorbents ◽  
Effect Of Surface

Bitterness such as Naringin in Grapefruits and Limonin in all Citrus fruits have a strong influence on consumers’ choices for their favorite juices. There have been many methods from ultrafiltration to biocatalysis used to lower such bitter compounds and make the juices more desirable by the consumer. One major tool for such debittering operation is the use of synthetic adsorbents which will be discussed in this paper. Ion exchange resins and adsorbents have been used for over a century in various food applications to concentrate flavors, decolorize juices, and enhance the quality of the final product. These types of resins are being synthesized to specific parameters to distinguish them from other tools. Mitsubishi Chemical’s work on optimizing their synthetic adsorbents for high bitterness removal from citrus juice was investigated. Parameters such as the base matrix structure, pore size and distribution, as well as the effect of surface area were studied. As the FDA has strict definitions about the appropriate resin chemistry that can be used in a food application (21 CFR 173.65), progress in new resin chemistry was limited by such regulations. This paper discusses the use of the original Sepabeads SP70 which was introduced into the market about 20 years ago, to the high capacity resin, Sepabeads SP700, which was introduced 10 years ago, and finally, to the Sepabeads SP710, which is the current optimized version of 20 years of research work. Mitsubishi Chemical’s resins were compared to other resins in the industry for the removal of naringin, limonin, and 8-hydroxyfuranocoumarin (furanocoumarins are compounds that affects the proper absorption of certain medications). Proper regeneration and rejuvenation of these resins were outlined. Paper published with permission.

scholarly journals The Effect Of Chief Risk Officer (CRO) On Enterprise Risk Management (ERM) Practices: Evidence From Malaysia

2010 ◽  
Vol 9 (11) ◽  
Author(s):  
Wan Norhayate Wan Daud Daud ◽  
Ahmad Shukri Yazid ◽  
Hj Mohd Rasid Hussin
Keyword(s):  
Risk Management ◽  
Strong Influence ◽  
Research Work ◽  
Listed Companies ◽  
Enterprise Risk Management ◽  
Regression Analyses ◽  
The Public ◽  
Enterprise Risk ◽  
Comprehensive Survey

This study investigates the level of Enterprise Risk Management (ERM) adoption within the Public Listed Companies (PLCs) in Malaysia and the influence of Chief Risk Officers (CROs) on ERM practices. Included in this particular study is a comprehensive survey on 500 companies from the main board of public listed companies in the Malaysian Bourse. Key findings of this research work reveal that only 42% of the companies surveyed have completely adopted ERM and based on regression analyses, the ‘quality’ of CROs has a strong influence on the level of ERM adoption within the PLCs involved in the survey.

Tribological behaviour and surface quality of polymeric industrial sealing materials

2010 ◽  
Vol 1 (1) ◽  
pp. 212-218
Author(s):  
Laszlo Zsidai ◽  
Robert Keresztes
Keyword(s):  
Surface Roughness ◽  
Research Work ◽  
Test Results ◽  
Tribological Behaviour ◽  
Polymer Tribology ◽  
Wear And Friction ◽  
Pin On Disc ◽  
Sealing Materials ◽  
Effect Of Surface

Tests presented in our research work as an example give look into the wear and frictionbehaviour of some typical polymer sealing compound (POM, PEEK, PA). The measurementsexamine above all the effect of surface roughness onto the wear and friction behaviour wear incase of optimal loading relations. We have carried out the test in pin-on –disc system. Based onthe test results we have classified the polymers on the basis of wear and friction factors.Keywords polymer tribology, sliding seals, surface roughnes, pin on disc

Simulation and Emulation Tools for Fog Computing

2020 ◽  
Vol 13 ◽  
Author(s):  
Simar Preet Singh ◽  
Rajesh Kumar ◽  
Anju Sharma ◽  
S. Raji Reddy ◽  
Priyanka Vashisht
Keyword(s):  
Quality Of Service ◽  
Programming Languages ◽  
Traffic Management ◽  
Fog Computing ◽  
Research Work ◽  
Research Experience ◽  
Computing Paradigm ◽  
Quality Of Service Parameters ◽  
User Friendly

Background: Fog computing paradigm has recently emerged and gained higher attention in present era of Internet of Things. The growth of large number of devices all around, leads to the situation of flow of packets everywhere on the Internet. To overcome this situation and to provide computations at network edge, fog computing is the need of present time that enhances traffic management and avoids critical situations of jam, congestion etc. Methods: For research purposes, there are many methods to implement the scenarios of fog computing i.e. real-time implementation, implementation using emulators, implementation using simulators etc. The present study aims to describe the various simulation and emulation tools for implementing fog computing scenarios. Results: Review shows that iFogSim is the simulator that most of the researchers use in their research work. Among emulators, EmuFog is being used at higher pace than other available emulators. This might be due to ease of implementation and user-friendly nature of these tools and language these tools are based upon. The use of such tools enhance better research experience and leads to improved quality of service parameters (like bandwidth, network, security etc.). Conclusion: There are many fog computing simulators/emulators based on many different platforms that uses different programming languages. The paper concludes that the two main simulation and emulation tools in the area of fog computing are iFogSim and EmuFog. Accessibility of these simulation/emulation tools enhance better research experience and leads to improved quality of service parameters along with the ease of their usage.

scholarly journals Children’s Understanding of Informed Assents in Research Studies

Healthcare ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 871
Author(s):  
Hortense Cotrim ◽  
Cristina Granja ◽  
Ana Sofia Carvalho ◽  
Carlos Cotrim ◽  
Rui Martins
Keyword(s):  
Health Care ◽  
Positive Relationship ◽  
Age Groups ◽  
High Capacity ◽  
Decision Making Process ◽  
Objective Understanding ◽  
Level Of Understanding ◽  
Age And Sex ◽  
Acceptance Of Health Care

The assent procedure reflects an effort to enable the minor to understand, to the degree they are capable of, what their participation in the decision making process would involve. Aims: To evaluate the minors’ ability to understand the information provided to them when obtaining assent and to evaluate the opinion of the parents regarding the importance of asking the child’s assent. Methods: The sample included a total of 52 minors aged between 10 and 17 years who underwent exercise echocardiogram. The Quality of Informed Consent is divided into two parts: Part A was used to measure objective understanding and part B to measure subjective understanding. Results: The results show that the minors have a high capacity to understand the information given to them when asking for assent. A positive relationship was found between the two parts of the questionnaire. No statistically significant relationship was found between age and sex and part A and part B or between both age groups (<14 years old and ≥14 years old) and the measure. In the case of the parents, 96.6% of parents consider assent as an advantage for the child’s acceptance of health care. The opinion of the parents is not related to the age, sex or level of schooling. Conclusion: Minors showed a substantial level of understanding regarding the information provided to them. The parents considered the implementation of assent fundamental to the child’s acceptance of health care.

Effect of surface chemistry on bio-conjugation and bio-recognition abilities of 2D germanene materials

Nanoscale ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 1893-1903
Author(s):  
Wei Li Ang ◽  
Jiri Sturala ◽  
Nikolas Antonatos ◽  
Zdeněk Sofer ◽  
Alessandra Bonanni
Keyword(s):  
Surface Chemistry ◽  
Strong Influence ◽  
Intrinsic Fluorescence ◽  
Surface Ligands ◽  
Chemically Modified ◽  
Recognition Efficiency ◽  
Effect Of Surface

The surface ligands on chemically modified germanenes have strong influence on the intrinsic fluorescence, on the bio-conjugation ability and the bio-recognition efficiency of the material towards the detection of a specific analyte.

Mechanical Interlocking on Leadframe Surface for Bondability of Au Wedge Bond

2016 ◽  
Vol 857 ◽  
pp. 79-82
Author(s):  
Roslina Ismail ◽  
Fuaida Harun ◽  
Azman Jalar ◽  
Shahrum Abdullah
Keyword(s):  
Optical Microscope ◽  
Bonding Process ◽  
Mechanical Interlocking ◽  
Average Roughness ◽  
Force Microscopy ◽  
Atomic Force ◽  
Surface Morphologies ◽  
Scanning Electron ◽  
Effect Of Surface

This work is a contribution towards the understanding of wire bond integrity and reliability in relation to their microstructural and mechanical properties in semiconductor packaging.The effect of surface roughness and hardness of leadframe on the bondability of Au wedge bond still requires detail analysis. Two type of leadframes namely leadframe A and leadframe B were chosen and scanning electron microscope (SEM) and optical microscope were used to inspect the surface morphology of leadframes and the quality of created Au wedge bond after wire bonding process. It was found that there were significant differences in the surface morphologies between these two leadframes. The atomic force microscopy (AFM) which was utilized to measure the average roughness, Ra of lead finger confirms that leadframe A has the highest Ra with value of 166.46 nm compared to that of leadframe B with value of 85.89 nm. While hardness value of different lead finger from the selected leadframe A and B obtained using Vicker microhardness tester are 180.9 VH and 154.2VH respectively.

Psychosocial Consequences among Elderly Living In Institutional and Non-Institutional Settings

2016 ◽  
Vol 4 (1) ◽  
Author(s):  
Nagesh Jamwal
Keyword(s):  
Quality Of Life ◽  
Elderly People ◽  
Research Work ◽  
The Elderly ◽  
Institutional Settings ◽  
Elderly Males ◽  
Psychosocial Consequences ◽  
Age Range ◽  
Elderly Living

Background – Elderly people face many psychological, physical and socio economic morbidities due to ageing. Institutional settings have been opened for those elderly people who are neither able to take care of themselves nor is there any person to look after them. Objectives- The present research work was conducted to study the quality of life, loneliness and psychological distress of the elderly males and females living in institutions and non-institutional settings in urban Jammu district. Methods –The study was conducted using purposive sampling on 40 elderly living in institutional settings and 40 elderly living in non- institutional settings in the age range of 60-80 years. Tools used – GHQ  by Gautam, Nuhawan and Kamal ,UCLA loneliness scale(Russell, 1996)  and WHO (QOL-BREF, 1998),  was used. Results – The results revealed significant differences on loneliness and quality of life between those living in institutional settings and those living with their families.

MEASURES FOR IMPROVING THE MICROBIOLOGICAL SAFETY OF COW MILK

2019 ◽  
Vol 1 (1) ◽  
pp. 44-49
Author(s):  
G. A. Larionov ◽  
◽  
O. Yu. Checheneshkina ◽  
N. V. Mardaryeva ◽  
N. V. Sсhiptsova ◽  
...  
Keyword(s):  
Somatic Cells ◽  
Research Work ◽  
Dairy Farm ◽  
Cow Milk ◽  
Control Group ◽  
Anaerobic Microorganisms ◽  
Special Means ◽  
Before And After ◽  
Processing Enterprise

Safety of milk on microbiological indicators is an important condition for acceptance on the milk processing enterprise. High microbial contamination of milk and increased content of somatic cells in milk are often the cause of discrepancy to modern requirements of national and international regulatory documents. The development and implementation of measures aimed at improving the condition of the udder of cows, the use of modern means of processing is one of the most important tasks to improve the sanitary and hygienic conditions of milk production. Prevention of mastitis is one of the effective ways to improve the safety and quality of cows' milk. It is known that the most affordable way to prevent mastitis is strict hygiene during milking. In our article the results of research work received in the conditions of a dairy farm are presented. Researches on use of modern domestic means of processing of an udder before and after milking are carried out. For this, two experimental and one control groups were created. In summer and autumn, the udder of cows in the experimental groups were treated with special detergents and disinfectants. In the control group, the udders were not treated with special means. Udder hygiene was maintained by washing the nipples with warm water, as is customary in the household. It was established that the treatment of the udder of cows with disinfectants decreased the number of mesophilic aerobic and facultatively anaerobic microorganisms and somatic cells in the milk of cows.

The influence of legal framework on the Hellenic sector of public works

2018 ◽  
Vol 60 (5) ◽  
pp. 1196-1209
Author(s):  
Pavlos Metallinos
Keyword(s):  
Design Methodology ◽  
Research Work ◽  
Legal Framework ◽  
Public Works ◽  
Content Type ◽  
Legislative Framework ◽  
Annual Volume ◽  
Statistical Indicators ◽  
Total Circulation

Purpose This study aims to discover the motive for the time-to-time Hellenic collective capitalists’ intervention in the total circulation of capital of public works throughout the relative legislative framework. Thus the study attempts an original correlation of statistical indicators of Hellenic Statistical Authority with the legislative texts. Design/methodology/approach The Hellenic truth is that the branch of public works presents a peculiarity as far as the volume and quality of statistical facts and figures are concerned. To overcome this obstacle, this study analyzed the change of time series, relating the procedure of total circulation of contracting capital involved in public works with the content of the relative legislative rules which were applied during the period of 1958-2004 and their preambles. In this way, the annual volume of the constructional product in general is directly related with the particular characteristics that define the procedure of total circulation of the contracting capital in general. Findings The directly relation between the annual volume of the constructional Product in general and the particular characteristics that define the procedure of total circulation of the contracting capital in general, leads us to conclusions which, related with the policy and practices adopted by the collective capitalist, confirm or even set off eventual failures of respective conclusions drawn according to the prevailing concept. Originality/value By introducing the technique, the aim of this research work is achieved without reproducing the method of study and the conclusions of other researchers.

scholarly journals ANALYSIS OF USING DIFFERENTIATED APPROACH WHEN IRRIGATING AGRICULTURAL CROPS

2020 ◽  
Author(s):  
A. N. Babichev ◽  
◽  
A. A. Babenko ◽  
Keyword(s):  
Growth And Development ◽  
Irrigation System ◽  
Research Work ◽  
Climatic Conditions ◽  
Agricultural Crops ◽  
Critical Periods ◽  
Irrigation Regime ◽  
Agrochemical Properties ◽  
Quality Of Products

Purpose: to analyze the experience of Russian scientists in the field of application of a differentiated approach to agricultural crops irrigation. The overview of research work of domestic scientists on the use of an irrigation system in agriculture, in which the provision of agricultural crops with water to maintain a given level of the minimum water capacity will be carried out during the most critical periods of their growth and development is presented. During irrigation, the timing, frequency, irrigation rates depend on the level of groundwater occurrence, agrochemical properties of soils, weather and climatic conditions, phases of growth and development of crops. The application of a differentiated irrigation regime to maintain a given level of pre-irrigation moisture allows increasing the productivity of agricultural crops, the quality of products obtained while reducing irrigation and watering rates, the number of waterings. Conclusions. The study of the results of research work of domestic scientists in the field of influence of irrigation and the fertilization system on the yield and quality of agricultural products allows concluding that obtaining the planned yields is possible only if irrigation regimes are observed and the level of soil fertility is maintained by applying various fertilizers. The use of a differentiated approach to irrigation while maintaining a given level of pre-irrigation soil moisture during critical periods of crop development allows reducing irrigation water consumption and optimizing irrigation rates and their quantity. The study of a differentiated irrigation regime is promising now and in the near future, taking into account the deteriorating water supply in the territory of our country, associated with a change in weather and climatic conditions.

Sign in / Sign up

Export Citation Format

Share Document