Cyber-Physical Infrastructures for Advancing Pyrolysis Conversion Process: A Case Study of Biochar Production

2020 ◽  
Author(s):  
Benjamin Hersh ◽  
Amir Mohajeri ◽  
Amin Mirkouei ◽  
Min Xian
Keyword(s):  
Chemical Structure ◽  
Conversion Process ◽  
Substantial Portion ◽  
Process Yield ◽  
Biomass Feedstocks ◽  
Yield And Quality ◽  
Physical Chemical ◽  
Bio Oil ◽  
Market Needs

Abstract Biomass-based products (bioproducts) have been introduced as a means to address food-energy-water nexus challenges. However, the existing approaches have not been integrated to convert biomass into market-competitive bioproducts (e.g., biochar and bio-oil). Pretreatment and conversion processes represent the most substantial portion of the total bioproduct cost. This study proposes a portable conversion process for high-quality biochar and bio-oil production, using mixed reactors and advanced cyber-physical infrastructures to promote cross-cutting technological and commercialization opportunities. The proposed portable process converts biomass to bioproducts near the collection sites, which can address collection, staging, and logistics challenges. The fundamental novelty of this study lies in utilizing cyber-physical technologies for advancing pre-/post-conversion processes and crossing the boundaries to meet the market needs. A case study for biochar production from various biomass feedstocks is used to demonstrate and verify the application of the conversion process and the cyber-based advances. The results indicate that the integrated cyber-physical conversion pathway can increase process yield and quality. It is also found that biomass properties and conversion process configurations play a crucial role in determining the process yield and biochar quality in terms of the physical-chemical structure.

Pyrolysis of brown algae (Bifurcaria Bifurcata) in a stainless steel tubular reactor: From a review to a case study

2018 ◽  
Vol 14 (1) ◽  
pp. 31-60 ◽  
Author(s):  
M. Y. Guida ◽  
F. E. Laghchioua ◽  
A. Hannioui
Keyword(s):  
Particle Size ◽  
Stainless Steel ◽  
Flow Rate ◽  
Brown Algae ◽  
Tubular Reactor ◽  
Nitrogen Flow ◽  
Nitrogen Flow Rate ◽  
Bifurcaria Bifurcata ◽  
Bio Oil

This article deals with fast pyrolysis of brown algae, such as Bifurcaria Bifurcata at the range of temperature 300–800 °C in a stainless steel tubular reactor. After a literature review on algae and its importance in renewable sector, a case study was done on pyrolysis of brown algae especially, Bifurcaria Bifurcata. The aim was to experimentally investigate how the temperature, the particle size, the nitrogen flow rate (N2) and the heating rate affect bio-oil, bio-char and gaseous products. These parameters were varied in the ranges of 5–50 °C/min, below 0.2–1 mm and 20–200 mL. min–1, respectively. The maximum bio-oil yield of 41.3wt% was obtained at a pyrolysis temperature of 600 °C, particle size between 0.2–0.5 mm, nitrogen flow rate (N2) of 100 mL. min–1 and heating rate of 5 °C/min. Liquid product obtained under the most suitable and optimal condition was characterized by elemental analysis, 1H-NMR, FT-IR and GC-MS. The analysis of bio-oil showed that bio-oil from Bifurcaria Bifurcata could be a potential source of renewable fuel production and value added chemicals.

scholarly journals Food Bioactive Compounds and Emerging Techniques for Their Extraction: Polyphenols as a Case Study

Foods ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 37 ◽  
Author(s):  
José S. Câmara ◽  
Bianca R. Albuquerque ◽  
Joselin Aguiar ◽  
Rúbia C. G. Corrêa ◽  
João L. Gonçalves ◽  
...  
Keyword(s):  
Bioactive Compounds ◽  
Chemical Structure ◽  
Experimental Studies ◽  
Analytical Techniques ◽  
Convincing Evidence ◽  
Protective Effects ◽  
Extraction Techniques ◽  
Biological Impact ◽  
Preventive Effects

Experimental studies have provided convincing evidence that food bioactive compounds (FBCs) have a positive biological impact on human health, exerting protective effects against non-communicable diseases (NCD) including cancer and cardiovascular (CVDs), metabolic, and neurodegenerative disorders (NDDs). These benefits have been associated with the presence of secondary metabolites, namely polyphenols, glucosinolates, carotenoids, terpenoids, alkaloids, saponins, vitamins, and fibres, among others, derived from their antioxidant, antiatherogenic, anti-inflammatory, antimicrobial, antithrombotic, cardioprotective, and vasodilator properties. Polyphenols as one of the most abundant classes of bioactive compounds present in plant-based foods emerge as a promising approach for the development of efficacious preventive agents against NCDs with reduced side effects. The aim of this review is to present comprehensive and deep insights into the potential of polyphenols, from their chemical structure classification and biosynthesis to preventive effects on NCDs, namely cancer, CVDs, and NDDS. The challenge of polyphenols bioavailability and bioaccessibility will be explored in addition to useful industrial and environmental applications. Advanced and emerging extraction techniques will be highlighted and the high-resolution analytical techniques used for FBCs characterization, identification, and quantification will be considered.

scholarly journals The Mater-Bi® biodegradable film for strawberry (Fragaria x ananassa Duch.) mulching: effects on fruit yield and quality

2016 ◽  
Vol 11 (3) ◽  
pp. 203 ◽  
Author(s):  
Luigi Morra ◽  
Maurizio Bilotto ◽  
Domenico Cerrato ◽  
Raffaella Coppola ◽  
Vincenzo Leone ◽  
...  
Keyword(s):  
Bioactive Compounds ◽  
Titratable Acidity ◽  
Solid Content ◽  
Soluble Solid Content ◽  
Chemical Parameters ◽  
Biodegradable Film ◽  
Yield And Quality ◽  
Physical Chemical ◽  
Soluble Solid

Two trials in different agricultural farms were carried out from October 2014 to June 2015 with the aim to assess the advantages linked to the substitution of the low density polyethylene (LDPE) films for soil mulching with the Mater-Bi<sup>®</sup> biodegradable films in the strawberry cultivation under tunnel in Campania. Lifetime of biodegradable mulch and influence of type of mulch on the yield and the quality of cvs Sabrina and Fortuna were evaluated. Plants were cultivated on mulched, raised beds, high 40 cm from bottom soil. Mater-Bi<sup>®</sup> film was 20 <span>µ</span>m thick while LDPE film was 50 mm thick. The physical-chemical parameters (firmness, pH, total soluble solid content, titratable acidity and skin colour) and some bioactive compounds (total polyphenols, flavonoids, anthocyanins, antioxidant activity) of fruits were determined by three samplings effected in consecutive months (from March to May 2015) of the harvest cycle. Biodegradable film guaranteed an effective mulch along the whole strawberry cycle (9-10 months including the time of drawing up of film). Yields of cv Sabrina on LDPE was 18% higher than those on Mater-Bi<sup>®</sup> while the opposite was detected in cv Fortuna (+10%). The physical-chemical parameters of fruits were not modified by the mulches. The content of the bioactive compounds, instead, resulted, in each time of sampling, significantly higher in fruits picked on Mater-Bi<sup>®</sup> based film.

scholarly journals The impact of coal ash and slag dump on the quality of surface and ground waters - a case study

2019 ◽  
Vol 84 (5) ◽  
pp. 527-530
Author(s):  
Ivana Cipranic ◽  
Radmila Markovic ◽  
Stefan Djordjievski ◽  
Zoran Stevanovic ◽  
Marija Stevanovic
Keyword(s):  
Water Samples ◽  
Coal Ash ◽  
Negative Influence ◽  
Physical Treatment ◽  
Physical Chemical ◽  
Quality Of Water ◽  
Slag Dump ◽  
The Impact

This paper presents the assessment of the impact of coal ash and slag from the ?Maljevac? dump on the quality of water of Paleski Creek, Montenegro. The obtained results confirm the negative influence of surface and groundwater from the dump on the water from the Paleski Creek. The results obtained by testing of the water samples, collected from Paleski Creek upstream of the dump, indicate that the water is qualified to be used for drinking, after simple physical treatment and disinfection. The results obtained for the water samples collected from the Paleski creek downstream from the dump indicate that the water could be safe for drinking only after the treatment that requires an intensive physical, chemical and biological processing, including some extended treatment.

Analysis of Bio-Oil Produced by Co-Pyrolysis of Mahua Seed and Polystyrene

2015 ◽  
Vol 787 ◽  
pp. 771-775
Author(s):  
Debalaxmi Pradhan ◽  
R.K. Singh
Keyword(s):  
Heating Rate ◽  
Fossil Fuel ◽  
Synergetic Effect ◽  
Blend Ratio ◽  
Yield And Quality ◽  
Bio Oil ◽  
Quality Of Products ◽  
Temperature Heating

TheProduction of biofuel from biomass sources is believed to reduce the reliance of fossil fuel and its cost. This investigation was aimed to produce and characterize the bio-oil obtained from co-pyrolysis. Two different feed stocks were used for co-pyrolysis; one is Mahua seed (MS) and the other one is Polystyrene (PS). The effect in addition of plastic to biomass in pyrolysis process were investigated on the yield and quality of products. Experiments were conducted in a semi-batch pyrolysis reactor under various parameters of temperature, heating rate and blending ratio. The results indicated that a temperature of 525 °C, and blend ratio of 1:1is maximumwith a heating rate of 20 °C/min. The yield of bio-oil obtained from the co-pyrolysis was found to be approximately 71%, which was higher about 22% than that of yield obtained from pyrolysis of Mahua seed (MS) alone. Further the bio-oil was characterized using different spectroscopic and chromatographic analyses. The analysis of the results for characterization of bio-oil indicated that the synergetic effect increased the bio-oil yield and its quality.

Chemical structure and physical-chemical properties of mucilage from the leaves of Pereskia aculeata

2017 ◽  
Vol 70 ◽  
pp. 20-28 ◽  
Author(s):  
Andressa Amado Martin ◽  
Rilton Alves de Freitas ◽  
Guilherme Lanzi Sassaki ◽  
Paulo Henrique Labiak Evangelista ◽  
Maria Rita Sierakowski
Keyword(s):  
Chemical Structure ◽  
Chemical Properties ◽  
Physical Chemical

Comparison of ZrO2-SiO2 sols synthesized by two methods: Preparation, stability and physical-chemical structure

2019 ◽  
Vol 198 (1) ◽  
pp. 167-178
Author(s):  
Jing Yang ◽  
Debao Jia ◽  
Bo Li ◽  
Yingming Guo ◽  
Hongji Li ◽  
...  
Keyword(s):  
Chemical Structure ◽  
Physical Chemical
Sign in / Sign up

Export Citation Format

Share Document