scholarly journals Characterization of a Pulsating Drill Bit Blaster

2016 ◽  
Author(s):  
Nicholas J. Thorp ◽  
Geir Hareland ◽  
Brian R. Elbing ◽  
Runar Nygaard
Keyword(s):  
Drilling Fluid ◽  
Fluid Pressure ◽  
Pressure Oscillation ◽  
Drill String ◽  
Operating Conditions ◽  
Drill Bit ◽  
Pulsation Frequency ◽  
Design Changes ◽  
Weight On Bit ◽  
Fluid Pulsation

The drill bit blaster (DBB) studied in this paper aims to maximize the drilling rate of penetration (ROP) by using a flow interrupting mechanism to create drilling fluid pulsation. The fluctuating fluid pressure gradient generated during operation of the DBB could lead to more efficient bit cutting efficiency due to substrate depressurization and increased cutting removal efficiency and the vibrations created could reduce the drill string friction allowing a greater weight on bit (WOB) to be achieved. In order to maximize these mechanisms the effect of several different DBB design changes and operating conditions was studied in above ground testing. An analytical model was created to predict the influence of various aspects of the drill bit blaster design, operating conditions and fluid properties on the bit pressure characteristics and compared against experimental results. The results indicate that internal tool design has a significant effect on the pulsation frequency and amplitude, which can be accurately modeled as a function of flowrate and internal geometry. Using this model an optimization study was conducted to determine the sensitivity of the fluid pulsation power on various design and operating conditions. Application of this technology in future designs could allow the bit pressure oscillation frequency and amplitude to be optimized with regard to the lithology of the formations being drilled which could lead to faster, more efficient drilling potentially cutting drilling costs and leading to a larger number of oil and natural gas plays being profitable.

New Approaches for Drilling Highly Depleted Reservoir in Deep Water Wells

2021 ◽  
Author(s):  
Ola Mohamed Balbaa ◽  
Hesham Mohamed ◽  
Sherif Mohamed Elkholy ◽  
Mohamed ElRashidy ◽  
Robert Munger ◽  
...  
Keyword(s):  
Deep Water ◽  
Drilling Fluid ◽  
Drill Pipe ◽  
Cost Effective ◽  
Drill String ◽  
Drilling Fluids ◽  
Prevention Measures ◽  
Enabling Factors ◽  
Design Changes ◽  
The Mediterranean

Abstract While drilling highly depleted gas reservoirs with a very narrow drilling window, Common drilling methods like utilizing loss of circulation pills, wellbore strengthening materials and managed pressure drilling (MPD) are being used in several reservoirs, yet it cannot be successful or cost effective if applied in a traditional manner. Innovative approaches to enable drilling wells in highly depleted reservoir in the Mediterranean deep water were adopted. The approaches incorporated design changes to the well and Bottom hole assembly (BHA), optimized drilling practices, and unconventional use of MPD while drilling and cementing production liner. Well design change in comparison to offset wells to allow drilling the reservoir in one hole section. Several design changes were considered in the BHA and drilling fluids to prevent as well as mitigate losses and differential sticking risks. From the BHA viewpoint, one of the key successful prevention measures was maximizing the standoff to reduce the contact area with the formation, this was achieved through utilizing spiral heavy wall drill pipe (HWDP) instead of drill collars in addition to a modeled placement of stabilizers and roller reamers. While on the drilling fluid side, Calcium carbonate material was added to strengthen wellbore, prevent losses and avoid formation damage. Particle size up to 1000 micron and concentration up to 40ppb was used to strengthen the depleted sands dynamically while drilling. Furthermore, as mitigation to stuck pipe, Jar and accelerator placement was simulated to achieve optimum impulse and impact force while maintaining the Jar above potential sticking zone. Whereas to address the consequence of a stuck pipe event, disconnect subs were placed in BHA to allow for recovering the drill string efficiently. MPD was first introduced in the Mediterranean in 2007 and continued to develop this well-known technique to mitigate various drilling challenges. For this well, MPD was one of the key enabling factors to safely drill, run and cement the production liner. Surface back pressure MPD allowed using the lowest possible mud weight in the hole and maintaining downhole pressure constant in order to manage the narrow drilling window between the formation pressure and fracture pressure (less than 0.4 ppg). MPD was also applied for the first time for running and cementing the production liner to prevent losses and achieve good cement quality which is a key to successful well production.

scholarly journals NETL Extreme Drilling Laboratory Studies High Pressure High Temperature Drilling Phenomena

2008 ◽  
Vol 130 (4) ◽  
Author(s):  
K. David Lyons ◽  
Simone Honeygan ◽  
Thomas Mroz
Keyword(s):  
Physical Simulation ◽  
Drilling Fluid ◽  
Fluid Pressure ◽  
Rock Properties ◽  
Drilling Fluids ◽  
Laboratory Studies ◽  
Drilling Parameters ◽  
High Pressure High Temperature ◽  
Fluid Properties ◽  
Weight On Bit

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) established the Extreme Drilling Laboratory to engineer effective and efficient drilling technologies viable at depths greater than 20,000 ft. This paper details the challenges of ultradeep drilling, documents reports of decreased drilling rates as a result of increasing fluid pressure and temperature, and describes NETL’s research and development activities. NETL is invested in laboratory-scale physical simulation. Its physical simulator will have capability of circulating drilling fluids at 30,000 psi and 480°F around a single drill cutter. This simulator is not yet operational; therefore, the results will be limited to the identification of leading hypotheses of drilling phenomena and NETL’s test plans to validate or refute such theories. Of particular interest to the Extreme Drilling Laboratory’s studies are the combinatorial effects of drilling fluid pressure, drilling fluid properties, rock properties, pore pressure, and drilling parameters, such as cutter rotational speed, weight on bit, and hydraulics associated with drilling fluid introduction to the rock-cutter interface. A detailed discussion of how each variable is controlled in a laboratory setting will be part of the conference paper and presentation.

scholarly journals NETL Extreme Drilling Laboratory Studies High Pressure High Temperature Drilling Phenomena

2007 ◽  
Author(s):  
K. David Lyons ◽  
Simone Honeygan ◽  
Thomas Mroz
Keyword(s):  
Physical Simulation ◽  
Drilling Fluid ◽  
Fluid Pressure ◽  
Rock Properties ◽  
Drilling Fluids ◽  
Deep Drilling ◽  
Drilling Parameters ◽  
High Pressure High Temperature ◽  
Fluid Properties ◽  
Weight On Bit

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) established an Extreme Drilling Lab to engineer effective and efficient drilling technologies viable at depths greater than 20,000 feet. This paper details the challenges of ultra-deep drilling, documents reports of decreased drilling rates as a result of increasing fluid pressure and temperature, and describes NETL’s Research and Development activities. NETL is invested in laboratory-scale physical simulation. Their physical simulator will have capability of circulating drilling fluids at 30,000 psi and 480 °F around a single drill cutter. This simulator will not yet be operational by the planned conference dates; therefore, the results will be limited to identification of leading hypotheses of drilling phenomena and NETL’s test plans to validate or refute such theories. Of particular interest to the Extreme Drilling Lab’s studies are the combinatorial effects of drilling fluid pressure, drilling fluid properties, rock properties, pore pressure, and drilling parameters, such as cutter rotational speed, weight on bit, and hydraulics associated with drilling fluid introduction to the rock-cutter interface. A detailed discussion of how each variable is controlled in a laboratory setting will be part of the conference paper and presentation.

scholarly journals Laboratory Simulation of Drill Bit Dynamics Using a Model-Based Servohydraulic Controller

2008 ◽  
Vol 130 (4) ◽  
Author(s):  
David W. Raymond ◽  
M. A. Elsayed ◽  
Yarom Polsky ◽  
Scott S. Kuszmaul
Keyword(s):  
Dynamic Properties ◽  
High Strength ◽  
Drill String ◽  
Operating Conditions ◽  
Laboratory Simulation ◽  
Drill Bit ◽  
Component Reliability ◽  
Drilling Performance ◽  
Modes Of Vibration ◽  
And Performance

Drilling costs are significantly influenced by bit performance when drilling in offshore formations. Retrieving and replacing damaged downhole tools is an extraordinarily expensive and time-intensive process, easily costing several hundred thousand dollars of offshore rig time plus the cost of damaged components. Dynamic behavior of the drill string can be particularly problematic when drilling high strength rock, where the risk of bit failure increases dramatically. Many of these dysfunctions arise due to the interaction between the forces developed at the bit-rock interface and the modes of vibration of the drill string. Although existing testing facilities are adequate for characterizing bit performance in various formations and operating conditions, they lack the necessary drill string attributes to characterize the interaction between the bit and the bottom hole assembly (BHA). A facility that includes drill string compliance and yet allows real-rock/bit interaction would provide an advanced practical understanding of the influence of drill string dynamics on bit life and performance. Such a facility can be used to develop new bit designs and cutter materials, qualify downhole component reliability, and thus mitigate the harmful effects of vibration. It can also serve as a platform for investigating process-related parameters, which influence drilling performance and bit-induced vibration to develop improved practices for drilling operators. The development of an advanced laboratory simulation capability is being pursued to allow the dynamic properties of a BHA to be reproduced in the laboratory. This simulated BHA is used to support an actual drill bit while conducting drilling tests in representative rocks in the laboratory. The advanced system can be used to model the response of more complex representations of a drill string with multiple modes of vibration. Application of the system to field drilling data is also addressed.

Effects of Oil-Based Drilling-Fluid Rheological Properties on Hole-Cleaning Performance

2016 ◽  
Author(s):  
Benjamin Werner ◽  
Velaug Myrseth ◽  
Bjørnar Lund ◽  
Arild Saasen ◽  
Zalpato Ibragimova ◽  
...  
Keyword(s):  
Rheological Properties ◽  
Drilling Fluid ◽  
Drill String ◽  
Operating Conditions ◽  
Wellbore Stability ◽  
Drilling Fluids ◽  
Fluid Viscosity ◽  
Flow Loop ◽  
Cuttings Transport ◽  
Hole Cleaning

Drilling fluids play an important role in safe and efficient drilling operations. Wellbore stability, formation integrity, drill string lubrication, and cuttings transport are among their main requirements. The removal of a cuttings bed is one of the major difficulties while trying to keep up a steady drilling progress. Deviated and long horizontal wellbore sections provide challenges not only to the drilling equipment in use, but also to the fluids. Cuttings accumulate easily on the bottom of a wellbore section due to gravity and can therefore reduce hole cleaning efficiency. Cuttings transport is highly dependent on the properties of the drilling fluid. Viscosity, density and gel strength are among the key parameters. Drilling fluids have in general a complex composition with either water or oil as a base substance. Demanding operating conditions, for example high temperature difference from topside to the deep downhole sections or varying shear rates throughout the wellbore, also influence the properties of the fluids during operation. Drilling fluids have to be adapted to all these different drilling situations. The aim of the full project is to compare different water- and oil-based drilling fluids regarding their hole cleaning abilities. As part of the experimental study where drilling fluids are circulated in a 10 m long flow-loop test section with a free-whirling rotating inner drill string, rheological characterization with an Anton Paar MCR rheometer is performed. These measurements include determination of flow properties, yield stress and viscosity-temperature dependence. The results are correlated with the industry standard procedures for the testing of drilling-fluid properties with Fann 35 viscometers (API/ ISO standards). Measurements performed on viscometers at the oil rigs are done to receive fast results in order to control the drilling operation. In contrast, rheometer measurements provide the possibility of a deeper comprehension of the rheological properties of the drilling fluids due to the advanced measurement system. This work presents rheological properties for a typical oil-based drilling fluid commonly used on the Norwegian Continental Shelf, and includes a comparison with two other oil-based drilling fluids based on previously published work. The rheometer results are analyzed in relation to the flow loop experiments and to the viscosity data measured in accordance with the API/ISO specifications. The results from the rheological comparison together with the results from the flow-loop experiments are expected to make an influencing contribution to the question of why various drilling fluids perform so differently in terms of cuttings transport.

scholarly journals A study on weight-on-bit data correction method of a near-bit measuring tool

2019 ◽  
Vol 11 (1) ◽  
pp. 168781401882151 ◽  
Author(s):  
Xiaofeng Xu ◽  
Yingfeng Meng ◽  
Yonghui Liu ◽  
Yueying Ji
Keyword(s):  
Drilling Fluid ◽  
Drill String ◽  
Measured Data ◽  
Differential Pressure ◽  
Well Testing ◽  
Force Analysis ◽  
The Real ◽  
Axial Forces ◽  
Weight On Bit ◽  
Measuring Tool

The real weight on bit is difficult to observe or estimate in highly deviated wells and extended-reach wells since complex loads are acted on drill string. Near-bit measurement while drilling tools, which are generally used to address this issue, can only measure axial forces based on axial strains instead of the real WOB. Axial forces on near-bit drill string are mainly controlled by buoyancy force of drilling fluid, circulating pressure, and other factors. To some extent, the measured data can be corrected by force analysis. It should be noted that experiments must be conducted to study the influences of differential pressure and temperature on measured WOB data of near-bit measuring tool. This article presents calculating method of real WOB via correction of measured data, based on force analysis of a self-developed near-bit measuring tool and experiments on influences of differential pressure and downhole temperature. Field test indicates that higher deviation angle will lead to a greater difference between real WOB and the indicated value at wellhead. Multi-well testing data verification indicates that this method is effective and reliable in extracting real WOB, and helpful to accurately identify the running state of bottom-hole assembly.

Study of stick–slip suppression and robustness to parametric uncertainty in drill strings containing torsional vibration tool using sliding-mode control

2021 ◽  
pp. 146441932110452
Author(s):  
Jialin Tian ◽  
Jie Wang ◽  
Siqi Zhou ◽  
Yinglin Yang ◽  
Liming Dai
Keyword(s):  
Torsional Vibration ◽  
Complex Dynamics ◽  
Sliding Mode ◽  
Parametric Uncertainty ◽  
Drill String ◽  
Lumped Parameter Model ◽  
Drilling Process ◽  
Drill Bit ◽  
Stick Slip ◽  
Drilling Operations

Excessive stick–slip vibration of drill strings can cause inefficiency and unsafety of drilling operations. To suppress the stick–slip vibration that occurred during the downhole drilling process, a drill string torsional vibration system considering the torsional vibration tool has been proposed on the basis of the 4-degree of freedom lumped-parameter model. In the design of the model, the tool is approximated by a simple torsional pendulum that brings impact torque to the drill bit. Furthermore, two sliding mode controllers, U1 and U2, are used to suppress stick–slip vibrations while enabling the drill bit to track the desired angular velocity. Aiming at parameter uncertainty and system instability in the drilling operations, a parameter adaptation law is added to the sliding mode controller U2. Finally, the suppression effects of stick–slip and robustness of parametric uncertainty about the two proposed controllers are demonstrated and compared by simulation and field test results. This paper provides a reference for the suppression of stick–slip vibration and the further study of the complex dynamics of the drill string.

Pipe stick problems of deep well drilling

2021 ◽  
Vol 66 (05) ◽  
pp. 192-195
Author(s):  
Rövşən Azər oğlu İsmayılov ◽  
Keyword(s):  
Drilling Fluid ◽  
Drill Pipe ◽  
Drill String ◽  
Differential Pressure ◽  
Drilling Mud ◽  
Fluid Circulation ◽  
Well Drilling ◽  
Deep Well ◽  
Pressure Pipe ◽  
Bottomhole Pressure

The aricle is about the pipe stick problems of deep well drilling. Pipe stick problem is one of the drilling problems. There are two types of pipe stick problems exist. One of them is differential pressure pipe sticking. Another one of them is mechanical pipe sticking. There are a lot of reasons for pipe stick problems. Indigators of differential pressure sticking are increase in torque and drug forces, inability to reciprocate drill string and uninterrupted drilling fluid circulation. Key words: pipe stick, mecanical pipe stick,difference of pressure, drill pipe, drilling mud, bottomhole pressure, formation pressure

Eccentric String Reamer for ECD Reduction in the Depleted Field of Gulf of Thailand GoT

2021 ◽  
Author(s):  
Nichnita Tortrakul ◽  
Chatwit Pochan ◽  
Nardthida Kananithikorn ◽  
Thanapong Siripan ◽  
Basil Ching ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Low Cost ◽  
Operating Cost ◽  
Cost Effective ◽  
Operational Reliability ◽  
Drill String ◽  
Fluid Loss ◽  
Gulf Of Thailand ◽  
Drilling Depth ◽  
Annular Clearance

Abstract This paper presents a method of reducing equivalent circulating density (ECD) while drilling using eccentric string reamers (ESR) with adjustable gage stabilizer (AGS) in Gulf of Thailand (GoT). Reduced ECD in slimhole is desirable when drilling depleted reservoirs as reduced borehole pressure can reduce or delay drilling fluid loss events. Delaying losses can allow well depth to be increased with the prospect of penetrating otherwise unrealized pay horizons and increasing reserves capture. Several methods of reducing ECD were considered but most solutions included changing drill string and/or casing design specifications with prohibitive cost. A low-cost, low operational-impact solution was needed. Hole-opening is a method of increasing annular clearance, but well delivery requirements of ~4.5 days per well necessitates a one-trip solution without introducing significant ROP reduction or negatively impact bottomhole assembly (BHA) walking tendencies. Further, the preferred solution must be compatible with a high temperature reservoir drilling environment and must not undermine drilling system operational reliability. A simple but controversial tool for hole opening is ESR. ESR’s are simple in that there are no moving parts or cutter blocks to shift, and operating cost is low. They are controversial due to uncertainty that the tool eccentricity and drilling dynamics will successfully open hole to the desired diameter. Given that the intent of this hole-opening application is limited to creating annular clearance for fluid, not mechanical clearance, the eccentric reamer solution was chosen for field trial and potential development. A tool design challenge was to create a reamer geometry with the desired enlargement ratio (6⅛-in. to 6⅞-in.) while drilling, and reliably drift surface equipment and casing without complications. The ESR design must efficiently drill-out cement and float equipment as well as heterogeneous shale/sand/mudstone interbedded formation layers without significant vibration. If successful, the enlarged hole diameter will increase annular clearance, reduce ECD, improve hole cleaning, and allow drilling depth to be increased to capture additional reserves The plug and play functionality of the ESR required no changes to the existing rig site procedures in handling and making up the tool. The ESR drifts the casing and drills cement and shoe track with normal parameters. The ESR is run with standard measurements-while-drilling (MWD)/logging-while-drilling (LWD) AGS BHA and is able to reduce ECD providing the opportunity to drill deeper and increase barrel of oil equivalent (BOE) per each wellbore. Performance analysis has shown no negative effect on drilling performance and BHA walking tendency. The novelty of this ESR application is its proven ability to assist in increasing reserves capture in highly depleted reservoirs. The ESR is performing very efficiently (high ROP) and reliability is outstanding. In this application, the ESR is a very cost-effective and viable solution for slimhole design.

A Modular Mechanism for Downhole Weight-on-Bit and Torque Reaction in Small Diameter Boreholes

2021 ◽  
pp. 1-15
Author(s):  
Anirban Mazumdar ◽  
Stephen Buerger ◽  
Adam Foris ◽  
Jiann-cherng Su
Keyword(s):  
Axial Force ◽  
Small Diameter ◽  
Field Testing ◽  
Drill String ◽  
Force Transmission ◽  
Drilling Performance ◽  
Weight On Bit ◽  
In Series ◽  
Mechanical Devices ◽  
Scalable Design

Abstract Drilling systems that use downhole rotation must react torque either through the drill-string or near the motor to achieve effective drilling performance. Problems with drill-string loading such as buckling, friction, and twist become more severe as hole diameter decreases. Therefore, for small holes, reacting torque downhole without interfering with the application of weight-on-bit, is preferred. In this paper we present a novel mechanism that enables effective and controllable downhole weight on bit transmission and torque reaction. This scalable design achieves its unique performance through four key features: 1) mechanical advantage based on geometry, 2) direction dependent behavior using rolling and sliding contact, 3) modular scalability by combining modules in series, and 4) torque reaction and weight on bit that are proportional to applied axial force. As a result, simple mechanical devices can be used to react large torques while allowing controlled force to be transmitted to the drill bit. We outline our design, provide theoretical predictions of performance, and validate the results using full-scale testing. The experimental results include laboratory studies as well as limited field testing using a percussive hammer. These results demonstrate effective torque reaction, axial force transmission, favorable scaling with multiple modules, and predictable performance that is proportional to applied force.

Sign in / Sign up

Export Citation Format

Share Document