Investigation of Proppant Distributions in Rock Fractures With Applications to Hydraulic Fracturing

2021 ◽  
Author(s):  
Amir A. Mofakham ◽  
Farid Rousta ◽  
Dustin M. Crandall ◽  
Goodarz Ahmadi
Keyword(s):  
Fluid Flow ◽  
Hydraulic Fracturing ◽  
Oil And Gas ◽  
Fluid Dynamic ◽  
Rock Fracture ◽  
Experimental Investigations ◽  
Rock Fractures ◽  
Fracture Geometry ◽  
Injection Process ◽  
Fracking Fluid

Abstract Hydraulic fracturing or fracking is a procedure used extensively by oil and gas companies to extract natural gas or petroleum from unconventional sources. During this process, a pressurized liquid is injected into wellbores to generate fractures in rock formations to create more permeable pathways in low permeability rocks that hold the oil. To keep the rock fractures open after removing the high pressure, proppant, which typically are sands with different shapes and sizes, are injected simultaneously with the fracking fluid to spread them throughout rock fractures. The extraction productivity from shale reservoirs is significantly affected by the performance and quality of the proppant injection process. Since these processes occur under the ground and in the rock fractures, using experimental investigations to examine the process is challenging, if not impossible. Therefore, employing numerical tools for analyzing the process could provide significant insights leading to the fracking process improvement. Accordingly, in this investigation, a 4-way coupled Computational Fluid Dynamic and Discrete Element Method (CFD-DEM) code was used to simulate proppant transport into a numerically generated realistic rock fracture geometry. The simulations were carried out for a sufficiently long period to reach the fractures’ steady coverage by proppant. The proppant fracture coverage is a distinguishing factor that can be used to assess the proppant injection process quality. A series of simulations with different proppant sizes as well as various fracking fluid flow rates, were performed. The corresponding estimated fracture coverages for different cases were compared. The importance of proppant size as well as the fluid flow rate on the efficiency of the proppant injection process, were evaluated and discussed.

Some Effects of Stress, Friction, and Fluid Flow on Hydraulic Fracturing

1982 ◽  
Vol 22 (03) ◽  
pp. 321-332 ◽  
Author(s):  
M.E. Hanson ◽  
G.D. Anderson ◽  
R.J. Shaffer ◽  
L.D. Thorson
Keyword(s):  
Fluid Flow ◽  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Research Program ◽  
In Situ Stress ◽  
Material Interfaces ◽  
Fracture Geometry ◽  
Funded Research ◽  
Fracturing Process

Abstract We are conducting a U.S. DOE-funded research program aimed at understanding the hydraulic fracturing process, especially those phenomena and parameters that strongly affect or control fracture geometry. Our theoretical and experimental studies consistently confirm the well-known fact that in-situ stress has a primary effect on fracture geometry, and that fractures propagate perpendicular to the least principal stress. In addition, we find that frictional interfaces in reservoirs can affect fracturing. We also have quantified some effects on fracture geometry caused by frictional slippage along interfaces. We found that variation of friction along an interface can result in abrupt steps in the fracture path. These effects have been seen in the mineback of emplaced fractures and are demonstrated both theoretically and in the laboratory. Further experiments and calculations indicate possible control of fracture height by vertical change in horizontal stresses. Preliminary results from an analysis of fluid flow in small apertures are discussed also. Introduction Hydraulic fracturing and massive hydraulic fracturing (MHF) are the primary candidates for stimulating production from tight gas reservoirs. MHF can provide large drainage surfaces to produce gas from the low- permeability formation if the fracture surfaces remain in the productive parts of the reservoir. To determine whether it is possibleto contain these fractures in the productive formations andto design the treatment to accomplish this requires a much broader knowledge of the hydraulic fracturing process. Identification of the parameters controlling fracture geometry and the application of this information in designing and performing the hydraulic stimulation treatment is a principal technical problem. Additionally, current measurement technology may not be adequate to provide the required data. and new techniques may have to be devised. Lawrence Livermore Natl. Laboratory has been conducting a DOE-funded research program whose ultimate goal is to develop models that predict created hydraulic fracture geometry within the reservoir. Our approach has been to analyze the phenomenology of the fracturing process to son out and identify those parameters influencing hydraulic fracture geometry. Subsequent model development will incorporate this information. Current theoretical and stimulation design models are based primarily on conservation of mass and provide little insight into the fracturing process. Fracture geometry is implied in the application of these models. Additionally, pressure and flow initiation in the fractures and their interjection with the fracturing process is not predicted adequately with these models. We have reported previously on some rock-mechanics aspects of the fracturing process. For example, we have studied, theoretically and experimentally, pressurized fracture propagation in the neighborhood of material interfaces. Results of interface studies showed that natural fractures in the interfacial region negate any barrier effect when the fracture is propagating from a lower modulus material toward a higher modulus material. On the other hand, some fracture containment could occur when the fracture is propagating from a higher modulus into a lower modulus material. Effect of moduli changes on the in-situ stress field have to be taken into consideration to evaluate fracture containment by material interfaces. Some preliminary analyses have been performed to evaluate how stress changes when material properties change, but we have not evaluated this problem fully. SPEJ P. 321^

scholarly journals Evaluation of equivalent hydraulic aperture (EHA) for rough rock fractures

2019 ◽  
Vol 56 (10) ◽  
pp. 1486-1501 ◽  
Author(s):  
Fei Xiao ◽  
Zhiye Zhao
Keyword(s):  
Fluid Flow ◽  
Rock Fracture ◽  
Fluid Velocity ◽  
Surrogate Models ◽  
Rock Fractures ◽  
Parallel Plates ◽  
Characteristic Parameters ◽  
Fracture Roughness ◽  
Hydraulic Aperture ◽  
The Impact

Most existing models for fluid transportation within a single rock fracture tend to use a channel with two smooth parallel plates, whereas real fracture surfaces are usually rough and tortuous, which can produce a flow field significantly different from the smooth plate model. For fluid flow in a rough fracture, there are surface concave areas (SCA), where the fluid velocity is extremely low, contributing little to the fluid transportation. It is of great significance to quantitatively evaluate the impact of rough surfaces on fluid flow. Therefore, a numerical model for simulating Newtonian fluid through rough fractures is proposed, where synthetic surfaces are generated according to statistical analysis of natural rock fractures and can be quantified by several characteristic parameters. Equivalent hydraulic aperture (EHA) is proposed as one quantitative indicator for evaluating the impact of fracture roughness. Systematic studies were conducted for evaluating EHAs of rough fractures, which, combined with characteristic parameters of fractures, are used to build surrogate models for EHA prediction. It is found that the EHA is directly correlated with the fracture roughness, the mean mechanical aperture, and the standard deviation of aperture distribution. The developed surrogate models were verified to have a high accuracy for EHA prediction.

Evaluation of Fluid Behaviour and Mixing Efficiency in Predefined Serpentine Micro-Fracture System

2013 ◽  
Author(s):  
Gorakh Pawar ◽  
Ilija Miskovic ◽  
Manjunath Basavarajappa
Keyword(s):  
Fluid Flow ◽  
Pressure Drop ◽  
Hydraulic Fracturing ◽  
Oil And Gas ◽  
Rapid Expansion ◽  
Fluid Mixing ◽  
Mixing Efficiency ◽  
Fracturing Fluid ◽  
Hydraulic Fracturing Fluid ◽  
Geologic Media

Scientific research and development in the field of microfluidics and nanofluidics technology has witnessed a rapid expansion in recent years. Microfluidic and nanofluidic systems are finding increasing application in wide spectrum of biomedical and engineering fields, including oil and gas technology. Fluid flow characterization in porous geologic media is an important factor for predicting and improving oil and gas recovery. By developing understanding about the propagation of hydraulic fracturing fluid constituents in irregular micro- and nano-structures, and their multiphase interaction with reservoir fluids (e.g. mixing of supercritical CO2 with oil or gas) we can significantly improve efficiency of the current oil and gas (O&G) extraction process and reduce associated environmental impacts. In present paper, mixing of hydraulic fracturing fluid constituents in three dimensional serpentine microchannel system is simulated in CFD environment and results are used to evaluate mixing efficiency for different fracturing fluid compositions. In addition, pressure drop along the length of serpentine micro-channel is evaluated. Serpentine micro-channels considered in this study consist of periodic symmetrical and asymmetrical proppant particles, placed on both sides of the channel over the full length of the channel, to simulate realistic geometrical constraints usually seen in geological fractures. The fluid flow is characterized as a function of the proppant particle radius by varying size of adjacent proppant particles. Further, the flow is characterized by varying distance between adjacent proppant particles. Overall, this study will be primarily helpful to gain fundamental understanding of fracturing fluid mixing in micro-fractures, similar to real geologic media. In addition, this study will provide an insight into variations of fracturing fluid mixing efficiency, and pressure drop in micro-fracture systems as a function of geometry of the proppant particles at different flow rates.

scholarly journals Numerical Simulation on Non-Darcy Flow in a Single Rock Fracture Domain Inverted by Digital Images

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-13 ◽  
Author(s):  
Jianli Shao ◽  
Qi Zhang ◽  
Wenbin Sun ◽  
Zaiyong Wang ◽  
Xianxiang Zhu
Keyword(s):  
Numerical Simulation ◽  
Fluid Flow ◽  
Digital Images ◽  
Rock Fracture ◽  
Inertial Force ◽  
Darcy Flow ◽  
Fracture Aperture ◽  
Rock Fractures ◽  
Single Rock Fracture ◽  
Fracture Domain

The influence of rock seepage must be considered in geotechnical engineering, and understanding the fluid flow in rock fractures is of great concern in the seepage effect investigation. This study is aimed at developing a model for inversion of rock fracture domains based on digital images and further study of non-Darcy flow. The visualization model of single rock fracture domain is realized by digital images, which is further used in flow numerical simulation. We further discuss the influence of fracture domain geometry on non-Darcy flow. The results show that it is feasible to study non-Darcy flow in rock fracture domains by inversion based on digital images. In addition, as the joint roughness coefficient (JRC) increases or the fracture aperture decreases, distortion of the fluid flow path increases, and the pressure gradient loss caused by the inertial force increases. Both coefficients of the Forchheimer equation decrease with increasing fracture aperture and increase with increasing JRC. Meanwhile, the critical Reynolds number tends to decrease when JRC increases or the fracture aperture decreases, indicating that the fluid tends to non-Darcy flow. This work provides a reference for the study of non-Darcy flow through rock fractures.

Shale, Quakes, and High Stakes: Regulating Fracking-Induced Seismicity in Oklahoma, USA and Lancashire, UK

2019 ◽  
Vol 3 (1) ◽  
pp. 1-14
Author(s):  
Miriam R. Aczel ◽  
Karen E. Makuch
Keyword(s):  
United States ◽  
Hydraulic Fracturing ◽  
Shale Gas ◽  
Seismic Activity ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
High Volume ◽  
The United States ◽  
Horizontal Drilling ◽  
Induced Seismic Activity

High-volume hydraulic fracturing combined with horizontal drilling has “revolutionized” the United States’ oil and gas industry by allowing extraction of previously inaccessible oil and gas trapped in shale rock [1]. Although the United States has extracted shale gas in different states for several decades, the United Kingdom is in the early stages of developing its domestic shale gas resources, in the hopes of replicating the United States’ commercial success with the technologies [2, 3]. However, the extraction of shale gas using hydraulic fracturing and horizontal drilling poses potential risks to the environment and natural resources, human health, and communities and local livelihoods. Risks include contamination of water resources, air pollution, and induced seismic activity near shale gas operation sites. This paper examines the regulation of potential induced seismic activity in Oklahoma, USA, and Lancashire, UK, and concludes with recommendations for strengthening these protections.

Significance of Mineralogical and Lithologic-Petrographical Rank in the Ranking of Geological Information

2020 ◽  
Vol 42 (4) ◽  
pp. 33-49
Author(s):  
O.V. CHEPIZHKO ◽  
V.V. YANKO ◽  
V.M. KADURIN ◽  
I.M. NAUMKO ◽  
S.M. SHATALIN
Keyword(s):  
Fluid Flow ◽  
Black Sea ◽  
Bottom Sediments ◽  
Oil And Gas ◽  
Sedimentary Cover ◽  
Geochemical Characteristics ◽  
The Black Sea ◽  
Flow Parameters ◽  
Geochemical Parameters ◽  
Geological Information

For the first time the importance of mineralogical and lithological-petrographical ranks in the line of geological information ranks is substantiated for implementation of long-term forecasts, standard and non-standard approaches to research of physical and geochemical parameters as a basis of creation of complex system of forecast criteria and prospecting indicators of hydrocarbons within the sedimentary cover of Black sea based on the theory of global fluid-flows derivation. These criteria have different sensitivity to the object (hydrocarbon deposits) and are therefore ranked. The ranking determined the following parameters: 1) seismic data within the object, obtained by the method of deep seismic sounding, RWM SDP; 2) parameters of tectono-geodynamic structures; 3) the main characteristics of sedimentary cover and bedrock; 4) geochemical characteristics; 5) parameters of mineral complexes and fluid inclusions in mineral neoformations; 6) the value of the distribution of meiobenthos. Based on modern views of oil and gas geology, structural-tectonic and lithological-facies criteria are among the main ones. The study of the mineralogical component of sediments is made with using mineralogical, thermobarogeochemical and X-ray spectral methods. Fixation of anomalies of fluid flow at the bottom of the Black Sea as to the distribution of abiotic parameters in order to assess the prospects of oil and gas is determined by structural and tectonic features and high permeability of fluid flow; parameters of mineral complexes (minerals, facies) and genetic connections; heterogeneity of geochemical characteristics of bottom sediments; the presence of hydrocarbon inclusions in authigenic minerals of bottom sediments.

Simulation of proppant transport and fracture plugging in the framework of a radial hydraulic fracturing model

2020 ◽  
Vol 35 (6) ◽  
pp. 325-339
Author(s):  
Vasily N. Lapin ◽  
Denis V. Esipov
Keyword(s):  
Numerical Model ◽  
Hydraulic Fracturing ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Injection Rate ◽  
Fluid Injection ◽  
Subtraction Technique ◽  
Gas Industry ◽  
Proppant Transport ◽  
Hydraulic Fracture Propagation

AbstractHydraulic fracturing technology is widely used in the oil and gas industry. A part of the technology consists in injecting a mixture of proppant and fluid into the fracture. Proppant significantly increases the viscosity of the injected mixture and can cause plugging of the fracture. In this paper we propose a numerical model of hydraulic fracture propagation within the framework of the radial geometry taking into account the proppant transport and possible plugging. The finite difference method and the singularity subtraction technique near the fracture tip are used in the numerical model. Based on the simulation results it was found that depending on the parameters of the rock, fluid, and fluid injection rate, the plugging can be caused by two reasons. A parameter was introduced to separate these two cases. If this parameter is large enough, then the plugging occurs due to reaching the maximum possible concentration of proppant far from the fracture tip. If its value is small, then the plugging is caused by the proppant reaching a narrow part of the fracture near its tip. The numerical experiments give an estimate of the radius of the filled with proppant part of the fracture for various injection rates and leakages into the rock.

Sign in / Sign up

Export Citation Format

Share Document