Experimental and Numerical Investigation of Effect of Center Offset Degree on Compressor Stability With Circumferential Grooved Casing Treatment

2016 ◽  
Author(s):  
HaoGuang Zhang ◽  
Feng Tan ◽  
YanHui Wu ◽  
WuLi Chu ◽  
Wei Wang ◽  
...  
Keyword(s):  
Axial Compressor ◽  
Leading Edge ◽  
Groove Depth ◽  
Tip Clearance ◽  
Central Difference ◽  
Stall Margin ◽  
Casing Treatment ◽  
Compressor Rotor ◽  
Stall Margin Improvement ◽  
Blade Tip

For compressor blade tip stall, one effective way of extending stable operating range is with the application of circumferential grooved casing treatment and its validity was proved by a lot of experimental and numerical investigations. The emphases of most circumferential grooved investigations are focused on the influence of groove depth and groove number on compressor stability, and there is few investigations dealt with the center offset degree of circumferential grooves casing treatment. Hence, an axial compressor rotor with casing treatment (CT) was investigated with experimental and numerical methods to explore the effect of center offset degree on compressor stability and performance. In the work reported here, The center offset degree is defined as the ratio of the central difference between rotor tip axial chord and CT to the axial chord length of rotor tip. When the center of CT is located within the upstream direction of the center of rotor tip axial chord, the value of center offset degree is positive. The experimental and numerical results show that stall margin improvement gained with CT is reduced as the value of center offset degree varies from 0 to 0.33 or −0.33, and the CT with −0.33 center offset degree achieves the lowest value of stall margin improvement at 53% and 73% design rotational speed. The detailed analysis of the flow-field in compressor tip indicates that there is not positive effect made by grooves on leading edge of rotor blade tip when the value of center offset degree is −0.33. As the mass flow of compressor reduces further, tip clearance leakage flow results in the outlet blockage due to the absence of the positive action of grooves near blade tip tail when the value of center offset degree is 0.33. Blockage does not appear in rotor tip passage owing to utilizing the function of all grooves with CT of 0 center offset degree.

Part-Circumference Casing Treatment and the Effect on Compressor Stall

1989 ◽  
Author(s):  
N. A. Cumpsty
Keyword(s):  
Axial Compressor ◽  
Tip Clearance ◽  
Start Time ◽  
Stall Inception ◽  
Stall Margin ◽  
Tip Clearance Flow ◽  
Casing Treatment ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Stall Margin Improvement

Results are presented and discussed from an axial compressor rotor operated with an axial skewed slot casing treatment over part of the circumference. The compressor was one for which stall was initiated in the tip region and for this type there is some potential for stall margin improvement with lower loss using this. The main significance of the experiments is, however, the possibility of looking at aspects of stall inception. Normally stall inception is a brief transient with an unknown start time and is difficult to study but with the partial casing treatment it was possible to make the untreated section operate continuously in such a way that it underwent the processes normally leading to stall. For a tip stalling rotor the experiments identify the annulus boundary layer as the crucial region of the flow and spillage of the tip-clearance flow forward of the blades as a process leading to the rapid build up of blockage prior to instability and stall.

Effect of Various Trench Designs on Axial Compressor Blade Tip Aerodynamics

2019 ◽  
Author(s):  
Ashwin Ashok ◽  
Patur Ananth Vijay Sidhartha ◽  
Shine Sivadasan
Keyword(s):  
Axial Compressor ◽  
Leading Edge ◽  
Suction Side ◽  
Horseshoe Vortex ◽  
Tip Clearance ◽  
Compressor Cascade ◽  
Tip Leakage Vortex ◽  
Stall Margin ◽  
Casing Treatment ◽  
Tip Leakage

Abstract Tip clearance of axial compressor blades allows leakage of the flow, generates significant losses and reduces the compressor efficiency. The present paper aims to discuss the axial compressor tip aerodynamics for various configurations of tip gap with trench. The various configurations are obtained by varying the clearance, trench depth, step geometry and casing contouring. In this paper the axial compressor aerodynamics for various configurations of tip gap with trench have been studied. The leakage flow structure, vorticity features and entropy generations are analyzed using RANS based CFD. The linear compressor cascade comprises of NACA 651810 blade with clearance height varied from 0.5% to 2% blade span. Trail of the tip leakage vortex and the horseshoe vortex on the blade suction side are clearly seen for the geometries with and without casing treatments near the stalling point. Since the trench side walls are similar to forward/backing steps, a step vortex is observed near the leading edge as well as trailing edge of the blade and is not seen for the geometry without the casing treatment. Even though the size of the tip leakage vortex seams to be reduces by providing a trench to the casing wall over the blade, the presence of additional vortices like the step vortex leads to comparatively higher flow losses. An increase in overall total pressure loss due to the application of casing treatment is observed. However an increase in stall margin for the geometries with casing is noted.

Mechanism of affecting the performance and internal flow field of an axial flow subsonic compressor with self-recirculation casing treatment

2020 ◽  
pp. 095441002094267
Author(s):  
Hao G Zhang ◽  
Fei Y Dong ◽  
Wei Wang ◽  
Wu L Chu ◽  
Song Yan
Keyword(s):  
Flow Field ◽  
Axial Flow ◽  
Internal Flow ◽  
Leading Edge ◽  
Tip Clearance ◽  
Stall Margin ◽  
Casing Treatment ◽  
Leakage Flows ◽  
Blade Tip ◽  
Compressor Performance

This investigation aims to understand the mechanisms of affecting the axial flow compressor performance and internal flow field with the application of self-recirculation casing treatment. Besides, the potentiality of further enhancing the compressor performance and stability by optimizing the geometric structure of self-recirculation casing treatment is discussed in detail. The results show that self-recirculation casing treatment generates about 7.06, 7.89% stall margin improvements in the experiment and full-annulus unsteady calculation, respectively. Moreover, the compressor total pressure and isentropic efficiency are improved among most of operating points, and the experimental and calculated compressor peak efficiencies are increased by 0.7% and 0.6%, respectively. The comparisons between baseline shroud and self-recirculation casing treatment show that the flow conditions of the compressor rotor inlet upstream are improved well with self-recirculation casing treatment, and the degree of the pressure enhancement in the blade top passage for self-recirculation casing treatment is higher than that for baseline. Further, self-recirculation casing treatment can restrain the leading edge-spilled flows made by the blade tip clearance leakage flows and weaken the blade tip passage blockage. Hence, the flow loss near the rotor top passage is reduced after the application of self-recirculation casing treatment. The rotor performance and stability for self-recirculation casing treatment are greater than those for baseline. The flow-field analyses also indicate that the adverse effects caused by the clearance leakage flows of the blades tip rear are greater than those made by the clearance leakage flows of the blades leading edge. When one injecting part of self-recirculation casing treatment is aligned with the inlet of one blade tip passage, the flow-field quality in the passage is not the best among all the passages between two adjacent injecting parts of self-recirculation casing treatment. Further, the flow-field analyses also indicate that the effect of the relative position between the blade and self-recirculation casing treatment on the flows in the self-recirculation casing treatment may be ignored during the optimization of the recirculating loop configuration.

Stall Margin Improvement by Use of Casing Treatments

2013 ◽  
Author(s):  
Christian T. Pixberg ◽  
Heinz-Peter Schiffer ◽  
M. H. Ross ◽  
J. D. Cameron ◽  
S. C. Morris
Keyword(s):  
Tip Clearance ◽  
Stall Margin ◽  
Tip Clearance Flow ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Clearance Flow ◽  
Beneficial Impact ◽  
Stall Margin Improvement ◽  
Blade Tip ◽  
Casing Treatments

The beneficial impact of casing treatments on the stall margin of tip-critical compressors has been proven many times. However, there is still no simple and general method to predict their actual effectiveness. The present work considers the axial velocity deficit that is generally observed at the blade tip. This so called tip-blockage is caused by the tip clearance flow. That is investigated for different configurations of the transonic compressor test facilities in Darmstadt and Notre Dame and the results are presented in this paper. Similar circumferential groove casing treatments were applied to different single-stage and 1.5-stage compressors. They all had a tip critical behavior in common, but exhibited different design philosophies. The effectiveness of similar casing treatments on different stages was observed. A new method for calculating tip-blockage is introduced based on compressor performance and the results of a through-flow tool. A direct link between blockage growth and stall margin improvement was found for circumferential grooves casing treatments. Additionally, the results of an axial slot casing treatment are taken into account.

scholarly journals Stall margin improvement in a low-speed axial compressor rotor using a blockage-optimised single circumferential casing groove

2021 ◽  
Vol 5 ◽  
pp. 79-89
Author(s):  
Ahmad Fikri Mustaffa ◽  
Vasudevan Kanjirakkad
Keyword(s):  
Axial Compressor ◽  
Pressure Rise ◽  
Leading Edge ◽  
Tip Leakage Flow ◽  
Stall Margin ◽  
Low Speed ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Stall Margin Improvement ◽  
Edge Based

The stall margin of tip-critical axial compressors can be improved by using circumferential casing grooves. From previous studies, in the literature, the stall margin improvement due to the casing grooves can be attributed to the reduction of the near casing blockage. The pressure rise across the compressor as the compressor is throttled intensifies the tip leakage flow. This results in a stronger tip leakage vortex that is thought to be the main source of the blockage. In this paper, the near casing blockage due to the tip region aerodynamics in a low-speed axial compressor rotor is numerically studied and quantified using a mass flow-based blockage parameter. The peak blockage location at the last stable operating point for a rotor with smooth casing is found to be at about 10% of the tip chord aft of the tip leading edge. Based on this information, an optimised single casing groove design that minimises the peak blockage is found using a surrogate-based optimisation approach. The implementation of the optimised groove is shown to produce a stall margin improvement of about 5%.

Performance Desensitization for a High-Speed Axial Compressor

2018 ◽  
Author(s):  
Yassine Souleimani ◽  
Huu Duc Vo ◽  
Hong Yu
Keyword(s):  
High Speed ◽  
Numerical Study ◽  
Pressure Ratio ◽  
Axial Compressor ◽  
Tip Clearance ◽  
Lower Sensitivity ◽  
Tip Leakage Flow ◽  
Stall Margin ◽  
Casing Treatment ◽  
Compressor Rotor

The increase in compressor tip clearance over the lifespan of an aero-engine leads to a long-term degradation in its fuel consumption and operating envelope. A highly promising recent numerical study on a theoretical high-speed axial compressor rotor proposed a novel casing treatment to decrease performance and stall margin sensitivity to tip clearance increase. This paper aims to apply and analyze, through CFD simulations, this casing treatment concept to a representative production axial compressor rotor with inherently lower sensitivity to tip clearance increase and complement the explanation on the mechanism behind the reduction in sensitivity. Simulations of the baseline rotor showed that the lower span region contribute as much to the pressure ratio sensitivity as the tip region which is dominated by tip leakage flow. In contrast, the efficiency sensitivity is mainly driven by losses occurring in the tip region. The novel casing treatment was successfully applied to the baseline rotor through a design refinement. Although the casing treatment causes some penalty in nominal performance, it completely reversed the pressure ratio sensitivity (i.e. pressure ratio increases with tip clearance) and reduced the efficiency sensitivity. The reversed pressure ratio sensitivity is explained by a rotation in the core flow in the lower span region indirectly induced by the flow injection from the casing treatment. The lower efficiency sensitivity comes from a reduction in the amount of fluid that crosses the tip clearance of two adjacent blades, known as double leakage. The casing treatment’s beneficial effect on stall margin sensitivity is less obvious because of the stall inception type of the baseline rotor and its change in the presence of the casing treatment.

Mechanism of affecting the axial rotor stability and performance with center offset degrees of axial skewed slots

2019 ◽  
Vol 234 (2) ◽  
pp. 330-341 ◽  
Author(s):  
HaoGuang Zhang ◽  
Enhao Wang ◽  
WenHao Liu ◽  
Wuli Chu
Keyword(s):  
Flow Field ◽  
Leading Edge ◽  
Low Velocity ◽  
Central Difference ◽  
Stall Margin ◽  
Casing Treatment ◽  
Flow Losses ◽  
Positive Effects ◽  
Stall Margin Improvement ◽  
And Performance

A subsonic axial rotor with axial skewed slot casing treatment (ASSCT) was investigated with experimental and numerical methods to explore the effects of the center offset degree (Cod) on the rotor stability and performance. Cod is defined as the ratio of the central difference between the rotor tip section and ASSCT to the rotor tip axial chord length. The Cod values are selected as 1.16, 0.608, 0, and −0.36, respectively. When the ASSCT is located upstream, the value of the Cod is positive. The experimental and unsteady calculated results show that the stall margin improvement (SMI) and peak efficiency loss (PEL) are reduced when the slots move to the rotor upstream or downstream. The slots with 0 Cod (ASSCT1) achieve 50% SMI with 8.67% PEL. The slots with 0.608 Cod (ASSCT2) gain 48.5% SMI with 2.12% PEL. The slots with 1.16 Cod (ASSCT3) and −0.36 Cod (ASSCT4) gain −3.41%, 20.1% SMI, respectively. Considering the compromise between the SMI and PEL for the rotor, ASSCT5 was designed by changing the slot number of ASSCT2 from 180 to 90. The unsteady calculated result shows that ASSCT5 can gain 22.28% SMI and 0.485% PEL. The detailed analysis of the flow field in the compressor tip passage indicates that there are adverse effects made by the slots on the flow field near the rotor blade tip leading edge for ASSCT3. Moreover, the ability of reducing the range of low-velocity zones for ASSCT4 is much lower than that for ASSCT1 or ASSCT2, and ASSCT1 generates bigger flow losses in the rotor tip passage than ASSCT2. The positive effects and flow losses made by the slots with 0.608 Cod both become smaller with the slot number decreasing from 180 to 90.

The improvement of transonic compressor performance by the self-circulating casing treatment

2020 ◽  
pp. 095440622094226
Author(s):  
Song Yan ◽  
Wuli Chu
Keyword(s):  
Flow Field ◽  
Axial Flow ◽  
Leading Edge ◽  
Tip Clearance ◽  
The Self ◽  
Casing Treatment ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Blade Tip ◽  
Stability Effect

The performance curve of the compressor is limited by the surge boundary, so it is of great significance to increase the stable working range of the compressor. The self-circulating casing treatment is an effective way to improve the stable working range of the compressor. In this paper, the study of the influence of the injector position of the self-circulating casing treatment on the transonic axial flow compressor rotor performance is carried out by using the numerical simulation. The influence mechanism of the injector position on the enhancing stability effect of the self-circulating casing treatment is revealed. It is found that the self-circulating casing treatment can reduce the blade tip blockage by restraining the blade tip clearance leakage flow and changing the trajectory of the tip clearance leakage vortex, thus delaying the deterioration of the rotor tip flow field and improving the rotor stability. When the injector position of the self-circulating casing treatment moves from the upstream of the leading edge of the blade tip to the trailing edge of the blade tip, the enhancing stability effect of the self-circulating casing treatment increases first and then decreases. But the high-velocity jet from the injector of the self-circulating casing treatment aggravates the mixing loss of the rotor tip flow field, so that the rotor efficiency slightly decreases after using the self-circulating casing treatment.

scholarly journals Effects of Endwall Suction and Blowing on Compressor Stability Enhancement

1989 ◽  
Author(s):  
N. K. W. Lee ◽  
E. M. Greitzer
Keyword(s):  
Flow Injection ◽  
Axial Compressor ◽  
Pressure Rise ◽  
Primary Objective ◽  
Stall Margin ◽  
Casing Treatment ◽  
Blade Row ◽  
Stall Margin Improvement ◽  
Stability Enhancement ◽  
Suction And Blowing

An experimental investigation was carried out to examine the effects on stall margin of flow injection into, and flow removal out of, the endwall region of an axial compressor blade row. A primary objective of the investigation was clarification of the mechanism by which casing treatment (which involves both removal and injection) suppresses stall in turbomachines. To simulate the relative motion between blade and treatment, the injection and removal took place through a slotted hub rotating beneath a cantilevered stator row. Overall performance data and detailed (time-averaged) flowfield measurements were obtained. Flow injection and removal both increased the stalling pressure rise, but neither was as effective as the wall treatment. Removal of high blockage flow is thus not the sole reason for the observed stall margin improvement in casing or hub treatment, as injection can also contribute significantly to stall suppression. The results also indicate that the increase in stall pressure rise with injection is linked to the streamwise momentum of the injected flow, and it is suggested that this should be the focus of further studies.

Sign in / Sign up

Export Citation Format

Share Document