Primary Investigation on the Mechanism of Gravity Separation of the Droplets in the Steam Flow Field

2010 ◽  
Author(s):  
Jinyi Zhang ◽  
Hanliang Bo
Keyword(s):  
Flow Field ◽  
Separation Efficiency ◽  
Droplet Diameter ◽  
Gravity Separation ◽  
Qualitative Description ◽  
Steam Flow ◽  
Vapor Flow ◽  
Single Drop ◽  
Physical Description ◽  
The Relationship

A physical description of the formative cause and the ascension height of droplets is given according to the mechanism of gravity separation of the droplets in the steam flow field. In order to analyze the relationship between the height of gravity separation space and steam wetness, the dynamic single-drop model based on some simplified hypotheses is adopted, a comparison between the calculations and the experimental data is carried out. Based on this model and its analysis, the effects of the gravity separation space height, the velocity of the vapor flow, the droplet diameter as well as the initial velocity on the gravity separation efficiency are discussed in details. The qualitative description and analysis for the mechanism of gravity separation of the droplets in the steam flow field in this paper lays the groundwork for the qualitative analysis of the dynamic single-drop model.

Critical Conditions for Secondary Droplets Generated by Droplets Colliding Walls With Different Angles

2020 ◽  
Author(s):  
Yikai Wu ◽  
Wenxuan Ju ◽  
Yusheng Liu ◽  
Fulong Zhao ◽  
Sichao Tan
Keyword(s):  
Phase Change ◽  
Separation Efficiency ◽  
Three Dimensional ◽  
Gravity Separation ◽  
Critical Conditions ◽  
Vapor Flow ◽  
Change Model ◽  
Water Separation ◽  
Critical Separation ◽  
Droplet Phase

Abstract The single droplet phase change model during motion is developed based on the phenomena description and mechanism comprehension, which including the droplet phase change model as well as the droplet motion model. Then, the calculation of the droplet phase change characteristics during moving in the uniform flow in the gravity separation space is conducted. The results show that when the droplet are evaporating during its moving, the radius will decrease continuously and it will be carried more easily by the steam vapor, which will lead to the larger separation radii of the droplets and the reduced the gravity separation efficiency. In addition, this paper shows the three-dimensional map for the critical separation over the pressure difference and the steam vapor flow velocity, which can contribute to forecast the influence of the droplet phase change on the separation characteristics. The results can be applied in the design of the steam-water separation plants.

The Comparison with Numerical Simulation Results of Steam-Water Flow Field and Experimental Data for Car Exhaust Pipe

2011 ◽  
Vol 187 ◽  
pp. 570-574
Author(s):  
Qing Guo Liu ◽  
Yan Ma ◽  
Chun Mei Yang
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Flow Field ◽  
Separation Efficiency ◽  
Tangential Velocity ◽  
Exhaust Pipe ◽  
Two Phase ◽  
Car Exhaust ◽  
Simulation Results ◽  
The Relationship

In this paper, the physical model for flow field of exhaust pipe has been established on the condition of a liquid-gas exhaust pipe from cars using ethanol gasoline. The numerical simulation results for internal flow field of car exhaust pipe are compared with the experimental data. It is showed that the outside free vortex tangential velocity and axial velocity of single-phase flow field have been simulated better. It is indicated in the simulation of separation process of steam-water two-phase: The relative error, comparing the relationship between flow and separation efficiency with measured of that is less than 7%, and the same to 15%, comparing the relationship between flow and separation ratio with measured of that. Thereby, it is confirmed correctly for the mathematical model founded for numerical calculation and the algorithm selected.

scholarly journals Influence of Vortex Finder Structure on Separation Performance of Double-Overflow Three-Product Hydrocyclones

Separations ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 79
Author(s):  
Yuekan Zhang ◽  
Jiangbo Ge ◽  
Lanyue Jiang ◽  
Hui Wang ◽  
Junru Yang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Experimental Research ◽  
Separation Efficiency ◽  
Structural Parameters ◽  
Separation Performance ◽  
Insertion Depth ◽  
Flow Field Characteristics ◽  
Vortex Finder ◽  
Fine Classification

In view of the difficulty of traditional hydrocyclones to meet the requirements of fine classification, a double-overflow three-product (internal overflow, external overflow and underflow) hydrocyclone was designed in this study. Numerical simulation and experimental research methods were used to investigate the effects of double-overflow flow field characteristics and structural parameters (i.e., internal vortex finder diameter and insertion depth) on separation performance. The research results showed that the larger the diameter of the internal vortex finder, the greater the overflow yield and the larger the cut size. The finest internal overflow product can be obtained when the internal vortex finder is 30 mm longer than the external vortex finder. The separation efficiency is highest when the internal vortex finder is 30 mm shorter than the external vortex finder.

The toxicity of some insecticidal sprays to adult locusts

1962 ◽  
Vol 53 (3) ◽  
pp. 597-608 ◽  
Author(s):  
R. D. MacCuaig
Keyword(s):  
Schistocerca Gregaria ◽  
Droplet Diameter ◽  
Flight Activity ◽  
Spray Application ◽  
Single Drop ◽  
Flying Insects ◽  
Spray Droplets ◽  
Tentative Explanation

The toxicities of sprays of some insecticides used against locusts have been determined. The LD50's of γ BHC, diazinon, and dieldrin to both flying and settled adults of Schistocerca gregaria (Forsk.) were between 0·9 and 1·5 times those of the same formulations when applied as a single drop to the abdomen. The toxicity of these insecticides was not affected by the size of the spray droplets when these ranged from about 60 to 250 µ in diameter. The toxicity of DNC, however, was always less by spray application than when applied by micro-drop syringe and was affected by the droplet diameter (droplets of 100 µ being 1·5 times as toxic as those of 200–230 µ) and by whether the locusts were sprayed in flight or when tethered on a card (those in flight being about 1·6 times as susceptible to 100 µ droplets as those at rest). A tentative explanation of this effect is given.The speed of action of the insecticides was compared and the effects of flight activity on susceptibility to the insecticides when sprayed over the flying insects was examined, but none could be detected by the technique used.

A fast response miniature probe for wet steam flow field measurements

2016 ◽  
Vol 27 (12) ◽  
pp. 125901
Author(s):  
Ilias Bosdas ◽  
Michel Mansour ◽  
Anestis I Kalfas ◽  
Reza S Abhari
Keyword(s):  
Flow Field ◽  
Field Measurements ◽  
Fast Response ◽  
Steam Flow ◽  
Wet Steam ◽  
Wet Steam Flow

Contrast Study on the Radial Velocity of the Flow Field of the Hydrocyclones with Different Inlet Structures

2011 ◽  
Vol 339 ◽  
pp. 624-629
Author(s):  
Lian Cheng Ren ◽  
Zheng Liang ◽  
Jiang Meng ◽  
Lin Yang ◽  
Jia Lin Tian
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Radial Velocity ◽  
Axial Symmetry ◽  
Separation Efficiency ◽  
Great Influence ◽  
The Other ◽  
Contrast Study ◽  
The One ◽  
Tangential Inlet

On the base of numerical simulation and theoretical analysis, the flow field of a conventional single-tangential-inlet Hydrocyclone and a newly put forward axial-symmetry double-tangential-inlet hydrocyclone were contrasted. The study shows that the inlet structure of the Hydrocylone has a great influence on the radial velocity of the flow field in the hydrocyclone and that the radial velocity in the hydrocyclone with single-tangential-inlet is not symmetry about the axis of the hydrocyclone; and on the other hand the radial velocity in the hydrocyclone with axial-symmetry double-tangential-inlet is symmetry about the axis of the hydrocyclone. The magnitude of the radial velocity of the flow in the hydrocyclone with single-tangential-inlet is greater than that in the hydrocyclone with axial-symmetry double-tangential-inlet hydrocyclone, which means the hydrocyclone with axial-symmetry double-tangential-inlet has greater capability than the rival one with single-tangential inlet. The symmetry about the axis of the hydrocyclone of the radial velocity means the radial velocities in the place where the radio is the same are constant, which means the hydrocyclone has a great separation efficiency. The conclusion is that changing the conventional hydrocyclone into the one with axial-symmetry double-tangential-inlet structure can offer greater separation capability and efficiency.

Evaluation of Models for Droplet Shear Effect of Centrifugal Pump

2018 ◽  
Author(s):  
Ramin Dabirian ◽  
Shihao Cui ◽  
Ilias Gavrielatos ◽  
Ram Mohan ◽  
Ovadia Shoham
Keyword(s):  
Experimental Data ◽  
Size Distribution ◽  
Centrifugal Pump ◽  
Droplet Size ◽  
Separation Efficiency ◽  
Droplet Diameter ◽  
Droplet Size Distribution ◽  
Production Equipment ◽  
Transportation Equipment ◽  
Log Normal

During the process of petroleum production and transportation, equipment such as pumps and chokes will cause shear effects which break the dispersed droplets into smaller size. The smaller droplets will influence the separator process significantly and the droplet size distribution has become a critical criterion for separator design. In order to have a better understanding of the separation efficiency, estimation of the dispersed-phase droplet size distribution is very important. The objective of this paper is to qualitatively and quantitatively investigate the effect of shear imparted on oil-water flow by centrifugal pump. This paper presents available published models for the calculation of droplet size distribution caused by different production equipment. Also detailed experimental data for droplet size distribution downstream of a centrifugal pump are presented. Rosin-Rammler and Log-Normal Distributions utilizing dmax Pereyra (2011) model as well as dmin Kouba (2003) model are used in order to evaluate the best fit distribution function to simulate the cumulative droplet size distribution. The results confirm that applying dmax Pereyra (2011) model leads to Rosin-Rammler distribution is much closer to the experimental data for low shear conditions, while the Log-Normal distribution shows better performance for higher shear rates. Furthermore, the predictions of Modified Kouba (2003) dmin model show good results for predicting the droplet distribution in centrifugal pump, and even better predictions under various ranges of experiments are achieved with manipulating cumulative percentage at minimum droplet diameter F(Dmin).

Characteristics of Dynamic Forces Generated by a Flapping Butterfly and its Wake Structure

2017 ◽  
Author(s):  
Masaki Fuchiwaki ◽  
Kazuhiro Tanaka
Keyword(s):  
Flow Field ◽  
Butterfly Wing ◽  
Vortex Loop ◽  
Insect Wing ◽  
Fluid Forces ◽  
Insect Wings ◽  
Piv Measurement ◽  
Dynamic Forces ◽  
Butterfly Wings ◽  
The Relationship

A typical example of the flow field around a moving elastic body is that around butterfly wings. Butterflies fly by skillfully controlling this flow field, and vortices are generated around their bodies. The motion of their elastic wings produces dynamic fluid forces by manipulating the flow field. For this reason, there has been increased academic interest in the flow field and dynamic fluid forces produced by butterfly wings. A number of recent studies have qualitatively and quantitatively examined the flow field around insect wings. In some such previous studies, the vortex ring or vortex loop formed on the wing was visualized. However, the characteristics of dynamic forces generated by the flapping insect wing are not yet sufficiently understood. The purpose of the present study is to investigate the characteristics of dynamic lift and thrust produced by the flapping butterfly wing and the relationship between the dynamic lift and thrust and the flow field around the butterfly. We conducted the dynamic lift and thrust measurements of a fixed flapping butterfly, Idea leuconoe, using a six-axes sensor. Moreover, two-dimensional PIV measurement was conducted in the wake of the butterfly. The butterfly produced dynamic lift in downward flapping which became maximum at a flapping angle of approximately 0.0 deg. At the same time, the butterfly produced negative dynamic thrust during downward flapping. The negative dynamic thrust was not produced hydrodynamically by a flapping butterfly wing because a jet was not formed in front of the butterfly. The negative dynamic thrust was the kicking force for jumping and the maximum of this kicking force was about 6.0 times as large as the weight. On the other hand, the butterfly produced dynamic thrust in upward flapping which was approximately 6.0 times as large as the weight of the butterfly. However, the attacking force by the abdomen of the butterfly was included in the dynamic thrust and we have not yet clarified quantitatively the dynamic thrust produced by the butterfly wing.

scholarly journals CFD Simulation Research on Agglomeration between Coal-fired Ash Fine Particulate and Atomized Droplets

2020 ◽  
Vol 165 ◽  
pp. 01006
Author(s):  
Yiquan Guo ◽  
Junying Zhang
Keyword(s):  
Power Plant ◽  
Flow Field ◽  
Cfd Simulation ◽  
Negative Impact ◽  
Droplet Diameter ◽  
Temperature Drop ◽  
Operating Conditions ◽  
Gas Temperature ◽  
Simulation Research ◽  
Agglomeration Process

In this paper, a collision model between atomized droplets of agglomeration solution and particles is established. On this basis, the effects of flue gas temperature, atomized droplet diameter and other factors on the particle agglomeration process are studied. In addition, the evaporation model of agglomeration solution in the flue of a power plant is established for the coal-fired unit of power plant. Through CFD software, the variation of flow field velocity, temperature and pressure in the flue is simulated to determine whether the chemical agglomeration technology has negative impact on the actual operating conditions of the power plant. The simulation results show that the velocity and pressure of the flow field in the flue have no obvious change after the agglomerating agent is injected. Besides, the temperature drop of about 7°C. The droplets evaporate completely at a distance of 7-8 m after spraying. The evaporation time of droplets is within 1.6 s.

A Study on the Luminance of Landscape Lighting of Chinese Classical Architectures Based on Mesopic Vision

2011 ◽  
Vol 224 ◽  
pp. 175-178
Author(s):  
Li Ye Sun ◽  
Gang Liu ◽  
Hong Hai
Keyword(s):  
Subjective Evaluation ◽  
Qualitative Description ◽  
Experimental Result ◽  
Mesopic Vision ◽  
Cultural Connotation ◽  
Low Luminance ◽  
Quantification Analysis ◽  
Lighting Environment ◽  
The Relationship ◽  
Chinese Classic

Landscape lighting of Chinese classic architectures can reappearing the historical, cultural connotation and artistic appeal of architectures at night. Most of these scenes are low luminance and weak contrast, and the visual level is in mesopic vision. Taking the Summer Place as an example, considering the characteristics of vision in different luminance levels, this research obtains a series of simulant scenes with low luminance and weak contrast in mesopic vision by using physical quantity relations between the luminance of actual scene and reappearance scene. Utilizing experiment observation, computer simulation, quantification analysis and subjective evaluation, the research relate the quantitative index and the qualitative description and then realize the synthetically consideration of the relationship between the physics and the psychology stimulation in the lighting environment. Through the statistical analysis of experimental result, it suggests the satisfactory scope of the luminance and the luminance ratio. Similarly, the results of this research have significance to energy saving and the development of green lighting.

Sign in / Sign up

Export Citation Format

Share Document