Multi-Satellite InSAR Deformation Analysis for Pipeline Monitoring: Operational Application, Results and Validation in the Belridge Oil Field, 2001–2012

2014 ◽  
Author(s):  
Michael D. Henschel ◽  
Benjamin Deschamps ◽  
Gillian Robert ◽  
Rick Gailing
Keyword(s):  
Time Series ◽  
Surface Deformation ◽  
Time History ◽  
Satellite System ◽  
Oil Field ◽  
Ground Movement ◽  
Deformation Analysis ◽  
Data Set ◽  
Global Navigation Satellite ◽  
Deformation Measurements

This paper presents a time history of 12 years of surface deformation in the Belridge Oil Field, California, USA from an InSAR analysis using multiple satellites. The time series reveals deformation rates as high as 80 cm/yr at times with a maximum overall deformation of 3.92 m. The use of multiple satellites and multiple observation modes provided deformation measurements at a frequency as high as every two days from the RADARSAT-1 and RADARSAT-2 satellites. The InSAR derived estimates of motion are shown with respect to a pipeline segment that transects the Belridge Oil Field. The use of wide area ground movement monitoring provides both high resolution (3 m on the ground) and high precision (deformation measurements to ± 1 mm). The observed ground motion is validated with collocated measurements from a set of Global Navigation Satellite System units installed for a period in 2012. The long term, validated time series of observations provide a unique data set with which to compare pipeline incidents. The correlation between incidents and ground movement can help estimate the pipeline state as related to stress and strain from ground displacement.

scholarly journals Fusion of GNSS and Satellite Radar Interferometry: Determination of 3D Fine-Scale Map of Present-Day Surface Displacements in Italy as Expressions of Geodynamic Processes

2019 ◽  
Vol 11 (4) ◽  
pp. 394 ◽  
Author(s):  
Gregorio Farolfi ◽  
Aldo Piombino ◽  
Filippo Catani
Keyword(s):  
Surface Deformation ◽  
Satellite System ◽  
Sar Interferometry ◽  
Ground Movement ◽  
Sight Loss ◽  
Geodynamic Processes ◽  
Ground Point ◽  
Space Geodetic Techniques ◽  
Satellite Radar ◽  
Global Navigation Satellite

We present a detailed map of ground movement in Italy derived from the combination of the Global Navigation Satellite System (GNSS) and Satellite Synthetic Aperture Radar (SAR) interferometry. These techniques are two of the most used space geodetic techniques to study Earth surface deformation. The above techniques provide displacements with respect to different components of the ground point position; GNSSs use the geocentric International Terrestrial Reference System 1989 (ITRS89), whereas the satellite SAR interferometry components are identified by the Lines of Sight (LOSs) between a satellite and ground points. Moreover, SAR interferometry is a differential technique, and for that reason, displacements have no absolute reference datum. We performed datum alignment of InSAR products using precise velocity fields derived from GNSS permanent stations. The result is a coherent ground velocity field with detailed boundaries of velocity patterns that provide new information about the complex geodynamics involved on the Italian peninsula and about local movements.

Performance Assessment of GNSS-R Polarimetric Observations for Sea Level Monitoring

2021 ◽  
Author(s):  
Mahmoud Rajabi ◽  
Mstafa Hoseini ◽  
Hossein Nahavandchi ◽  
Maximilian Semmling ◽  
Markus Ramatschi ◽  
...  
Keyword(s):  
Time Series ◽  
Circular Polarization ◽  
Sea Level ◽  
Tide Gauge ◽  
Satellite System ◽  
Sea Surface ◽  
Analysis Tool ◽  
Lower Accuracy ◽  
Coastal Sea ◽  
Global Navigation Satellite

<p>Determination and monitoring of the mean sea level especially in the coastal areas are essential, environmentally, and as a vertical datum. Ground-based Global Navigation Satellite System Reflectometry (GNSS-R) is an innovative way which is becoming a reliable alternative for coastal sea-level altimetry. Comparing to traditional tide gauges, GNSS-R can offer different parameters of sea surface, one of which is the sea level. The measurements derived from this technique can cover wider areas of the sea surface in contrast to point-wise observations of a tide gauge.  </p><p>We use long-term ground-based GNSS-R observations to estimate sea level. The dataset includes one-year data from January to December 2016. The data was collected by a coastal GNSS-R experiment at the Onsala space observatory in Sweden. The experiment utilizes three antennas with different polarization designs and orientations. The setup has one up-looking, and two sea-looking antennas at about 3 meters above the sea surface level. The up-looking antenna is Right-Handed Circular Polarization (RHCP). The sea-looking antennas with RHCP and Left-Handed Circular Polarization (LHCP) are used for capturing sea reflected Global Positioning System (GPS) signals. A dedicated reflectometry receiver (GORS type) provides In-phase and Quadrature (I/Q) correlation sums for each antenna based on the captured interferometric signal. The generated time series of I/Q samples from different satellites are analyzed using the Least Squares Harmonic Estimation (LSHE) method. This method is a multivariate analysis tool which can flexibly retrieve the frequencies of a time series regardless of possible gaps or unevenly spaced sampling. The interferometric frequency, which is related to the reflection geometry and sea level, is obtained by LSHE with a temporal resolution of 15 minutes. The sea level is calculated based on this frequency in six modes from the three antennas in GPS L1 and L2 signals.</p><p>Our investigation shows that the sea-looking antennas perform better compared to the up-looking antenna. The highest accuracy is achieved using the sea-looking LHCP antenna and GPS L1 signal. The annual Root Mean Square Error (RMSE) of 15-min GNSS-R water level time series compared to tide gauge observations is 3.7 (L1) and 5.2 (L2) cm for sea-looking LHCP, 5.8 (L1) and 9.1 (L2) cm for sea-looking RHCP, 6.2 (L1) and 8.5 (L2) cm for up-looking RHCP. It is worth noting that the GPS IIR block satellites show lower accuracy due to the lack of L2C code. Therefore, the L2 observations from this block are eliminated.</p>

scholarly journals Copernicus Sentinel-1 MT-InSAR, GNSS and Seismic Monitoring of Deformation Patterns and Trends at the Methana Volcano, Greece

2020 ◽  
Vol 10 (18) ◽  
pp. 6445 ◽  
Author(s):  
Theodoros Gatsios ◽  
Francesca Cigna ◽  
Deodato Tapete ◽  
Vassilis Sakkas ◽  
Kyriaki Pavlou ◽  
...  
Keyword(s):  
Land Surface ◽  
Surface Deformation ◽  
Ground Deformation ◽  
Local Population ◽  
Seasonal Fluctuation ◽  
Satellite System ◽  
Deformation Monitoring ◽  
Persistent Scatterers ◽  
Geothermal Activity ◽  
Global Navigation Satellite

The Methana volcano in Greece belongs to the western part of the Hellenic Volcanic Arc, where the African and Eurasian tectonic plates converge at a rate of approximately 3 cm/year. While volcanic hazard in Methana is considered low, the neotectonic basin constituting the Saronic Gulf area is seismically active and there is evidence of local geothermal activity. Monitoring is therefore crucial to characterize any activity at the volcano that could impact the local population. This study aims to detect surface deformation in the whole Methana peninsula based on a long stack of 99 Sentinel-1 C-band Synthetic Aperture Radar (SAR) images in interferometric wide swath mode acquired in March 2015–August 2019. A Multi-Temporal Interferometric SAR (MT-InSAR) processing approach is exploited using the Interferometric Point Target Analysis (IPTA) method, involving the extraction of a network of targets including both Persistent Scatterers (PS) and Distributed Scatterers (DS) to augment the monitoring capability across the varied land cover of the peninsula. Satellite geodetic data from 2006–2019 Global Positioning System (GPS) benchmark surveying are used to calibrate and validate the MT-InSAR results. Deformation monitoring records from permanent Global Navigation Satellite System (GNSS) stations, two of which were installed within the peninsula in 2004 (METH) and 2019 (MTNA), are also exploited for interpretation of the regional deformation scenario. Geological, topographic, and 2006–2019 seismological data enable better understanding of the ground deformation observed. Line-of-sight displacement velocities of the over 4700 PS and 6200 DS within the peninsula are from −18.1 to +7.5 mm/year. The MT-InSAR data suggest a complex displacement pattern across the volcano edifice, including local-scale land surface processes. In Methana town, ground stability is found on volcanoclasts and limestone for the majority of the urban area footprint while some deformation is observed in the suburban zones. At the Mavri Petra andesitic dome, time series of the exceptionally dense PS/DS network across blocks of agglomerate and cinder reveal seasonal fluctuation (5 mm amplitude) overlapping the long-term stable trend. Given the steepness of the slopes along the eastern flank of the volcano, displacement patterns may indicate mass movements. The GNSS, seismological and MT-InSAR analyses lead to a first account of deformation processes and their temporal evolution over the last years for Methana, thus providing initial information to feed into the volcano baseline hazard assessment and monitoring system.

Validation of the accuracy of geodetic automated measurement system based on GNSS platform for continuous monitoring of surface movements in post-mining areas

2021 ◽  
Vol 112 (1) ◽  
pp. 47-57
Author(s):  
Violetta Sokoła-Szewioła ◽  
Zbigniew Siejka
Keyword(s):  
Continuous Monitoring ◽  
Surface Deformation ◽  
Optimal Solution ◽  
Satellite System ◽  
Reference Points ◽  
Hard Coal ◽  
Navigation Systems ◽  
Mining Areas ◽  
Global Navigation ◽  
Global Navigation Satellite

Abstract The problem involving the monitoring of surface ground movements in post-mining areas is particularly important during the period of mine closures. During or after flooding of a mine, mechanical properties of the rock mass may be impaired, and this may trigger subsidence, surface landslides, uplift, sinkholes or seismic activity. It is, therefore, important to examine and select updating methods and plans for long-term monitoring of post-mining areas to mitigate seismic hazards or surface deformation during and after mine closure. The research assumed the implementation of continuous monitoring of surface movements using the Global Navigation Satellite System (GNSS) in the area of a closed hard coal mine ‘Kazimierz-Juliusz’, located in Poland. In order to ensure displacement measurement results with the accuracy of several millimetres, the accuracy of multi-GNSS observations carried out in real time as a combination of four global navigation systems, Global Positioning System (GPS), Globalnaja Navigacionnaja Sputnikova Sistema (GLONASS), Galileo and BeiDou, was determined. The article presents the results of empirical research conducted at four reference points. The test observations were made in variants comprising measurements based on: GPS, GPS and GLONASS systems, GPS, GLONASS and Galileo systems, GPS, GLONASS, Galileo and BeiDou systems. For each adopted solution, daily measurement sessions were performed using the RTK technique. The test results were subjected to accuracy analyses. Based on the obtained results, it was found that GNSS measurements should be carried out with the use of three navigation systems (GPS, GLONASS, Galileo), as an optimal solution for the needs of continuous geodetic monitoring in the area of the study.

scholarly journals GNSS Multipath Detection Using Continuous Time-Series C/N0

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 4059
Author(s):  
Nobuaki Kubo ◽  
Kaito Kobayashi ◽  
Rei Furukawa
Keyword(s):  
Time Series ◽  
Continuous Time ◽  
Urban Areas ◽  
Satellite System ◽  
Line Of Sight ◽  
Static Tests ◽  
Gnss Receivers ◽  
Multipath Detection ◽  
Global Navigation Satellite ◽  
Multipath Errors

The reduction of multipath errors is a significant challenge in the Global Navigation Satellite System (GNSS), especially when receiving non-line-of-sight (NLOS) signals. However, selecting line-of-sight (LOS) satellites correctly is still a difficult task in dense urban areas, even with the latest GNSS receivers. This study demonstrates a new method of utilization of C/N0 of the GNSS to detect NLOS signals. The elevation-dependent threshold of the C/N0 setting may be effective in mitigating multipath errors. However, the C/N0 fluctuation affected by NLOS signals is quite large. If the C/N0 is over the threshold, the satellite is used for positioning even if it is still affected by the NLOS signal, which causes the positioning error to jump easily. To overcome this issue, we focused on the value of continuous time-series C/N0 for a certain period. If the C/N0 of the satellite was less than the determined threshold, the satellite was not used for positioning for a certain period, even if the C/N0 recovered over the threshold. Three static tests were conducted at challenging locations near high-rise buildings in Tokyo. The results proved that our method could substantially mitigate multipath errors in differential GNSS by appropriately removing the NLOS signals. Therefore, the performance of real-time kinematic GNSS was significantly improved.

scholarly journals VISUAL ANALYSIS OF RECURRENCE OF TIME SERIES OF THE COORDINATES ENU IN THE GPS STATIONS

2018 ◽  
Vol 24 (4) ◽  
pp. 470-484
Author(s):  
Alfonso Tierra ◽  
Rubén León ◽  
Alexis Tinoco-S ◽  
Carolina Cañizares ◽  
Marco Amores ◽  
...  
Keyword(s):  
Time Series ◽  
Continuous Monitoring ◽  
Visual Analysis ◽  
Finite Impulse Response ◽  
Satellite System ◽  
Nearest Neighbours ◽  
Low Pass ◽  
Global Navigation Satellite ◽  
Low Pass Filters ◽  
Content Information

Abstract The time series content information about the dynamic behavior of the system under study. This behavior could be complex, irregular and no lineal. For this reason, it is necessary to study new models that can solve this dynamic more satisfactorily. In this work a visual analysis of recurrence from time series of the coordinate’s variation ENU (East, North, Up) will be made. This analysis was obtained from nine continuous monitoring stations GPS (Global Navigation Satellite System); the intention is to study their behavior, they belong to the Equatorian GPS Network that materializes the reference system SIRGAS - ECUADOR. The presence of noise in the observations was reduced using digital low pass filters with Finite Impulse Response (FIR). For these series, the time delay was determined using the average mutual information, and for the minimum embedding dimension the False Nearest Neighbours (FNN) method was used; the purpose is to obtain the recurrent maps of each coordinates. The results of visual analysis show a strong tendency, especially in the East and North coordinates, while the Up coordinates indicate discontinued, symmetric and periodic behavior.

scholarly journals Brief communication: Co-seismic displacement on 26 and 30 October 2016 (<i>M</i><sub>w</sub> = 5.9 and 6.5) – earthquakes in central Italy from the analysis of a local GNSS network

2017 ◽  
Vol 17 (11) ◽  
pp. 1885-1892 ◽  
Author(s):  
Giorgio De Guidi ◽  
Alessia Vecchio ◽  
Fabio Brighenti ◽  
Riccardo Caputo ◽  
Francesco Carnemolla ◽  
...  
Keyword(s):  
Surface Deformation ◽  
Central Italy ◽  
Geodetic Network ◽  
Satellite System ◽  
Fault System ◽  
Seismic Sequence ◽  
Epicentral Area ◽  
Seismic Displacement ◽  
Fault Trace ◽  
Global Navigation Satellite

Abstract. On 24 August 2016 a strong earthquake (Mw = 6.0) affected central Italy and an intense seismic sequence started. Field observations, DInSAR (Differential INterferometry Synthetic-Aperture Radar) analyses and preliminary focal mechanisms, as well as the distribution of aftershocks, suggested the reactivation of the northern sector of the Laga fault, the southern part of which was already rebooted during the 2009 L'Aquila sequence, and of the southern segment of the Mt Vettore fault system (MVFS). Based on this preliminary information and following the stress-triggering concept (Stein, 1999; Steacy et al., 2005), we tentatively identified a potential fault zone that is very vulnerable to future seismic events just north of the earlier epicentral area. Accordingly, we planned a local geodetic network consisting of five new GNSS (Global Navigation Satellite System) stations located a few kilometres away from both sides of the MVFS. This network was devoted to working out, at least partially but in some detail, the possible northward propagation of the crustal network ruptures. The building of the stations and a first set of measurements were carried out during a first campaign (30 September and 2 October 2016). On 26 October 2016, immediately north of the epicentral area of the 24 August event, another earthquake (Mw = 5.9) occurred, followed 4 days later (30 October) by the main shock (Mw = 6.5) of the whole 2016 summer–autumn seismic sequence. Our local geodetic network was fully affected by the new events and therefore we performed a second campaign soon after (11–13 November 2016). In this brief note, we provide the results of our geodetic measurements that registered the co-seismic and immediately post-seismic deformation of the two major October shocks, documenting in some detail the surface deformation close to the fault trace. We also compare our results with the available surface deformation field of the broader area, obtained on the basis of the DInSAR technique, and show an overall good fit.

scholarly journals Geodetic Study of the 2006–2010 Ground Deformation in La Palma (Canary Islands): Observational Results

2020 ◽  
Vol 12 (16) ◽  
pp. 2566
Author(s):  
Joaquín Escayo ◽  
José Fernández ◽  
Juan F. Prieto ◽  
Antonio G. Camacho ◽  
Mimmo Palano ◽  
...  
Keyword(s):  
Canary Islands ◽  
Surface Deformation ◽  
Ground Deformation ◽  
Satellite System ◽  
Point Of View ◽  
Synthetic Aperture Radar Interferometry ◽  
La Palma ◽  
Moderate Seismicity ◽  
Definition Of ◽  
Global Navigation Satellite

La Palma is one of the youngest of the Canary Islands, and historically the most active. The recent activity and unrest in the archipelago, the moderate seismicity observed in 2017 and 2018 and the possibility of catastrophic landslides related to the Cumbre Vieja volcano have made it strongly advisable to ensure a realistic knowledge of the background surface deformation on the island. This will then allow any anomalous deformation related to potential volcanic unrest on the island to be detected by monitoring the surface deformation. We describe here the observation results obtained during the 2006–2010 period using geodetic techniques such as Global Navigation Satellite System (GNSS), Advanced Differential Synthetic Aperture Radar Interferometry (A-DInSAR) and microgravimetry. These results show that, although there are no significant associated variations in gravity, there is a clear surface deformation that is spatially and temporally variable. Our results are discussed from the point of view of the unrest and its implications for the definition of an operational geodetic monitoring system for the island.

scholarly journals Large areas surface deformation analysis through a cloud computing P-SBAS approach for massive processing of DInSAR time series

2017 ◽  
Vol 202 ◽  
pp. 3-17 ◽  
Author(s):  
Claudio De Luca ◽  
Ivana Zinno ◽  
Michele Manunta ◽  
Riccardo Lanari ◽  
Francesco Casu
Keyword(s):  
Time Series ◽  
Cloud Computing ◽  
Surface Deformation ◽  
Deformation Analysis
Sign in / Sign up

Export Citation Format

Share Document