Study on the Shockwave Pressure Testing Method for Detonating Cords

Author(s):  
Ying-Wei Bai ◽  
Zhuang-De Jiang ◽  
Yu-Long Zhao ◽  
En-Yi Chu ◽  
Kexuan Wang

When detonation cords are used in explosive trains such as explosive circuits, the output performance can be obtained by destructive tests of matching samples from common production lots. In this paper the shockwave pressure testing method for Detonating Cords is studied. Two types of sensors are used to test the shockwave pressure. One is a thin film Mn-Cu sensor which is a standard testing method for output performance of explosive devices. The other sensor is a high pressure sensor with a microcircuit in it; this sensor can be used many times. The testing results are verified in the detonation equation.

Sensors ◽  
2018 ◽  
Vol 18 (3) ◽  
pp. 736 ◽  
Author(s):  
Guodong Zhang ◽  
Yulong Zhao ◽  
Yun Zhao ◽  
Xinchen Wang ◽  
Xueyong Wei ◽  
...  

Author(s):  
A. Stoetzler ◽  
D. Dittmann ◽  
R. Henn ◽  
A. Jasenek ◽  
F. Klopf ◽  
...  

2001 ◽  
Vol 41 (1-4) ◽  
pp. 129-136 ◽  
Author(s):  
Eugene Zakar ◽  
Ronald Polcawich ◽  
Madan Dubey ◽  
Brett Piekarski ◽  
G. Mclane ◽  
...  

2012 ◽  
Vol 1436 ◽  
Author(s):  
Yoshihiro Ueoka ◽  
Mami Fujii ◽  
Haruka Yamazaki ◽  
Masahiro Horita ◽  
Yasuaki Ishikawa ◽  
...  

ABSTRACTEffect of high-pressure water vapor (HPV) annealing is discussed from density of state (DOS) by capacitance–voltage (C–V) method and ΔVFB by the cyclic C–V measurement. The DOS of HPV samples were smaller than that of conventional atmosphere (AT) annealing around conduction band minimum (Ec). The ΔVFB of HPV samples were also smaller than that of AT. This suggests that HPV annealing is an effective method to decrease electron trap density as compared with AT condition. Especially, HPV 0.5 MPa sample was lower electron trap density and more stable than the other pressure HPV samples. Therefore, it is considered that the HPV in 0.5 MPa is the most promising condition. In addition, we succeeded in demonstrating the analysis of trap density in thin film by C–V method and cyclic C–V measurement.


The object of the experiments related in this paper, is to trace the source of the electricity which accompanies the issue of steam of high pressure from the vessels in which it is contained. By means of a suitable apparatus, which the author describes and delineates, he found that electricity is never excited by the passage of pure steam, and is manifested only when water is at the same time present; and hence he concludes that it is altogether the effect of the friction of globules of water against the sides of the opening, or against the substances opposed to its passage, as the water is rapidly moved onwards by the current of steam. Accordingly it was found to be increased in quantity by increasing the pressure and impelling force of the steam. The immediate effect of this friction was, in all cases, to render the steam or water positive, and the solids, of whatever nature they might be, negative. In certain circumstances, however, as when a wire is placed in the current of steam at some distance from the orifice whence it has issued, the solid exhibits the positive electricity already acquired by the steam, and of which it is then merely the recipient and the conductor. In like manner, the results may be greatly modified by the shape, the nature, and the temperature of the passages through which the steam is forced. Heat, by preventing the condensation of the steam into water, likewise prevents the evolution of electricity, which again speedily appears by cooling the passages so as to restore the water which is necessary for the production of that effect. The phenomenon of the evolution of electricity in these circumstances is dependent also on the quality of the fluid in motion, more especially in relation to its conducting power. Water will not excite electricity unless it be pure ; the addition to it of any soluble salt or acid, even in minute quantity, is sufficient to destroy this property. The addition of oil of turpentine, on the other hand, occasions the development of electricity of an opposite kind to that which is excited by water ; and this the author explains by the particles or minute globules of the water having each received a coating of oil in the form of a thin film, so that the friction takes place only between that external film and the solids, along the surface of which the globules are carried. A similar, but a more permanent effect is produced by the presence of olive oil, which is not, like oil of turpentine, subject to rapid dissipation. Similar results were obtained when a stream of compressed air was substituted for steam in these experiments. When moisture was present, the solid exhibited negative, and the stream of air positive electricity ; but when the air was perfectly dry, no electricity of any kind was apparent. The author concludes with an account of some experiments in which dry powders of various kinds were placed in the current of air; the results differed according to the nature of the substances employed, and other circumstances.


2020 ◽  
Author(s):  
Ruobin Dai ◽  
Hongyi Han ◽  
Tianlin Wang ◽  
Jiayi Li ◽  
Chuyang Y. Tang ◽  
...  

Commercial polymeric membranes are generally recognized to have low sustainability as membranes need to be replaced and abandoned after reaching the end of their life. At present, only techniques for downcycling end-of-life high-pressure membranes are available. For the first time, this study paves the way for upcycling fouled/end-of-life low-pressure membranes to fabricate new high-pressure membranes for water purification, forming a closed eco-loop of membrane recycling with significantly improved sustainability.


Sensors ◽  
2020 ◽  
Vol 20 (16) ◽  
pp. 4419
Author(s):  
Ting Li ◽  
Haiping Shang ◽  
Weibing Wang

A pressure sensor in the range of 0–120 MPa with a square diaphragm was designed and fabricated, which was isolated by the oil-filled package. The nonlinearity of the device without circuit compensation is better than 0.4%, and the accuracy is 0.43%. This sensor model was simulated by ANSYS software. Based on this model, we simulated the output voltage and nonlinearity when piezoresistors locations change. The simulation results showed that as the stress of the longitudinal resistor (RL) was increased compared to the transverse resistor (RT), the nonlinear error of the pressure sensor would first decrease to about 0 and then increase. The theoretical calculation and mathematical fitting were given to this phenomenon. Based on this discovery, a method for optimizing the nonlinearity of high-pressure sensors while ensuring the maximum sensitivity was proposed. In the simulation, the output of the optimized model had a significant improvement over the original model, and the nonlinear error significantly decreased from 0.106% to 0.0000713%.


Atmosphere ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 307
Author(s):  
Makoto Inoue ◽  
Atsushi Ugajin ◽  
Osamu Kiguchi ◽  
Yousuke Yamashita ◽  
Masashi Komine ◽  
...  

In this study, we investigated the effects of the Tibetan High near the tropopause and the North Pacific High in the troposphere on occurrences of hot or cool summers in Japan. We first classified Japan into six regions and identified hot and cool summer years in these regions from a 38-year sample (1980–2017) based on the monthly air temperature. To investigate the features of circulation fields over Asia during hot and cool summers in Japan, we calculated the composite differences (hot summer years minus cool summer years) of several variables such as geopotential height, which indicated significant high-pressure anomalies in the troposphere and lower stratosphere. These results suggest that both the North Pacific and the Tibetan Highs tend to extend to Japan during hot summer years, while cool summers seem to be associated with the weakening of these highs. We found that extension of the Tibetan High to the Japanese mainland can lead to hot summers in Northern, Eastern, and Western Japan. On the other hand, hot summers in the Southwestern Islands may be due to extension of the Tibetan High to the south. Similarly, the latitudinal direction of extension of the North Pacific High is profoundly connected with the summer climate in respective regions.


Sign in / Sign up

Export Citation Format

Share Document