An Artificial Neural Network Model for Monitoring Real-Time Parameters and Detecting Early Warnings in Induced Draft Fan

2018 ◽  
Author(s):  
Di Hu ◽  
Gang Chen ◽  
Tao Yang ◽  
Cheng Zhang ◽  
Ziwen Wang ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Real Time ◽  
Ann Model ◽  
Distribution Law ◽  
Restricted Boltzmann Machines ◽  
Time Parameters ◽  
Artificial Neural ◽  
Induced Draft Fan ◽  
Early Warnings

This paper describes a method to monitor real time parameters and detect early warnings in induced draft fan (ID FAN). An artificial neural network (ANN) model based on cross-relationships among operating parameters was established. In particular, this paper adopted the pre-training of Restricted Boltzmann machines (RBM) and analyzed the training errors of model. A new approach was proposed to monitor parameters by predicted value of model and distribution law of training error, and the reasonable range of each parameter was defined to detect the early warnings in real time. Combining the historical operational data of the No. 1 induced draft fan of No. 3 generating unit in Shajiao C Power Plant in China, this work used MATLAB to verify and analyze the proposed method. The numerical examples shown that the proposed method has better detection performance than the fixed upper and lower limits in the safety instrumented system (SIS). Moreover, this work can expand to other machinery that could be used in manufacturing easily.

scholarly journals An artificial neural network model for rainfall forecasting in Bangkok, Thailand

2009 ◽  
Vol 13 (8) ◽  
pp. 1413-1425 ◽  
Author(s):  
N. Q. Hung ◽  
M. S. Babel ◽  
S. Weesakul ◽  
N. K. Tripathi
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Real Time ◽  
Input Parameter ◽  
Rain Gauge ◽  
Ann Model ◽  
Rainfall Forecasting ◽  
Forecast Performance ◽  
Hourly Data ◽  
Artificial Neural

Abstract. This paper presents a new approach using an Artificial Neural Network technique to improve rainfall forecast performance. A real world case study was set up in Bangkok; 4 years of hourly data from 75 rain gauge stations in the area were used to develop the ANN model. The developed ANN model is being applied for real time rainfall forecasting and flood management in Bangkok, Thailand. Aimed at providing forecasts in a near real time schedule, different network types were tested with different kinds of input information. Preliminary tests showed that a generalized feedforward ANN model using hyperbolic tangent transfer function achieved the best generalization of rainfall. Especially, the use of a combination of meteorological parameters (relative humidity, air pressure, wet bulb temperature and cloudiness), the rainfall at the point of forecasting and rainfall at the surrounding stations, as an input data, advanced ANN model to apply with continuous data containing rainy and non-rainy period, allowed model to issue forecast at any moment. Additionally, forecasts by ANN model were compared to the convenient approach namely simple persistent method. Results show that ANN forecasts have superiority over the ones obtained by the persistent model. Rainfall forecasts for Bangkok from 1 to 3 h ahead were highly satisfactory. Sensitivity analysis indicated that the most important input parameter besides rainfall itself is the wet bulb temperature in forecasting rainfall.

Temperature Rise Prediction of Oil-Air Lubricated Angular Contact Ball Bearings Using Artificial Neural Network

2019 ◽  
Vol 12 (3) ◽  
pp. 248-261
Author(s):  
Baomin Wang ◽  
Xiao Chang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Temperature Rise ◽  
High Speed ◽  
Ball Bearing ◽  
Influence Factors ◽  
Ball Bearings ◽  
Ann Model ◽  
Angular Contact Ball Bearing ◽  
Artificial Neural

Background: Angular contact ball bearing is an important component of many high-speed rotating mechanical systems. Oil-air lubrication makes it possible for angular contact ball bearing to operate at high speed. So the lubrication state of angular contact ball bearing directly affects the performance of the mechanical systems. However, as bearing rotation speed increases, the temperature rise is still the dominant limiting factor for improving the performance and service life of angular contact ball bearings. Therefore, it is very necessary to predict the temperature rise of angular contact ball bearings lubricated with oil-air. Objective: The purpose of this study is to provide an overview of temperature calculation of bearing from many studies and patents, and propose a new prediction method for temperature rise of angular contact ball bearing. Methods: Based on the artificial neural network and genetic algorithm, a new prediction methodology for bearings temperature rise was proposed which capitalizes on the notion that the temperature rise of oil-air lubricated angular contact ball bearing is generally coupling. The influence factors of temperature rise in high-speed angular contact ball bearings were analyzed through grey relational analysis, and the key influence factors are determined. Combined with Genetic Algorithm (GA), the Artificial Neural Network (ANN) model based on these key influence factors was built up, two groups of experimental data were used to train and validate the ANN model. Results: Compared with the ANN model, the ANN-GA model has shorter training time, higher accuracy and better stability, the output of ANN-GA model shows a good agreement with the experimental data, above 92% of bearing temperature rise under varying conditions can be predicted using the ANNGA model. Conclusion: A new method was proposed to predict the temperature rise of oil-air lubricated angular contact ball bearings based on the artificial neural network and genetic algorithm. The results show that the prediction model has good accuracy, stability and robustness.

scholarly journals Artificial neural network, predictor variables and sensitivity threshold for DNA methylation-based age prediction using blood samples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhonghui Thong ◽  
Jolena Ying Ying Tan ◽  
Eileen Shuzhen Loo ◽  
Yu Wei Phua ◽  
Xavier Liang Shun Chan ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Regression Model ◽  
Sensitivity Threshold ◽  
Ann Model ◽  
Blood Samples ◽  
Ann Models ◽  
Artificial Neural ◽  
The Impact ◽  
Age Prediction

AbstractRegression models are often used to predict age of an individual based on methylation patterns. Artificial neural network (ANN) however was recently shown to be more accurate for age prediction. Additionally, the impact of ethnicity and sex on our previous regression model have not been studied. Furthermore, there is currently no age prediction study investigating the lower limit of input DNA at the bisulfite treatment stage prior to pyrosequencing. Herein, we evaluated both regression and ANN models, and the impact of ethnicity and sex on age prediction for 333 local blood samples using three loci on the pyrosequencing platform. Subsequently, we trained a one locus-based ANN model to reduce the amount of DNA used. We demonstrated that the ANN model has a higher accuracy of age prediction than the regression model. Additionally, we showed that ethnicity did not affect age prediction among local Chinese, Malays and Indians. Although the predicted age of males were marginally overestimated, sex did not impact the accuracy of age prediction. Lastly, we present a one locus, dual CpG model using 25 ng of input DNA that is sufficient for forensic age prediction. In conclusion, the two ANN models validated would be useful for age prediction to provide forensic intelligence leads.

scholarly journals Estimation of the Hot Swap Circulation Current of a Multiple Parallel Lithium Battery System with an Artificial Neural Network Model

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1448
Author(s):  
Nam-Gyu Lim ◽  
Jae-Yeol Kim ◽  
Seongjun Lee
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Lithium Battery ◽  
Battery Pack ◽  
Battery Management ◽  
Ann Model ◽  
Battery System ◽  
Load Current ◽  
Circulating Current ◽  
Artificial Neural

Battery applications, such as electric vehicles, electric propulsion ships, and energy storage systems, are developing rapidly, and battery management issues are gaining attention. In this application field, a battery system with a high capacity and high power in which numerous battery cells are connected in series and parallel is used. Therefore, research on a battery management system (BMS) to which various algorithms are applied for efficient use and safe operation of batteries is being conducted. In general, maintenance/replacement of multi-series/multiple parallel battery systems is only possible when there is no load current, or the entire system is shut down. However, if the circulating current generated by the voltage difference between the newly added battery and the existing battery pack is less than the allowable current of the system, the new battery can be connected while the system is running, which is called hot swapping. The circulating current generated during the hot-swap operation is determined by the battery’s state of charge (SOC), the parallel configuration of the battery system, temperature, aging, operating point, and differences in the load current. Therefore, since there is a limit to formulating a circulating current that changes in size according to these various conditions, this paper presents a circulating current estimation method, using an artificial neural network (ANN). The ANN model for estimating the hot-swap circulating current is designed for a 1S4P lithium battery pack system, consisting of one series and four parallel cells. The circulating current of the ANN model proposed in this paper is experimentally verified to be able to estimate the actual value within a 6% error range.

Modeling of lime production process using artificial neural network

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Abolghasem Daeichian ◽  
Rana Shahramfar ◽  
Elham Heidari
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Production Process ◽  
High Energy ◽  
Ann Model ◽  
Artificial Neural ◽  
Rotary Kilns ◽  
Input Variables ◽  
Artificial Neural Network Ann ◽  
Lime Production

Abstract Lime is a significant material in many industrial processes, including steelmaking by blast furnace. Lime production through rotary kilns is a standard method in industries, yet it has depreciation, high energy consumption, and environmental pollution. A model of the lime production process can help to not only increase our knowledge and awareness but also can help reduce its disadvantages. This paper presents a black-box model by Artificial Neural Network (ANN) for the lime production process considering pre-heater, rotary kiln, and cooler parameters. To this end, actual data are collected from Zobahan Isfahan Steel Company, Iran, which consists of 746 data obtained in a duration of one year. The proposed model considers 23 input variables, predicting the amount of produced lime as an output variable. The ANN parameters such as number of hidden layers, number of neurons in each layer, activation functions, and training algorithm are optimized. Then, the sensitivity of the optimum model to the input variables is investigated. Top-three input variables are selected on the basis of one-group sensitivity analysis and their interactions are studied. Finally, an ANN model is developed considering the top-three most effective input variables. The mean square error of the proposed models with 23 and 3 inputs are equal to 0.000693 and 0.004061, respectively, which shows a high prediction capability of the two proposed models.

scholarly journals Methodology for Developing Hydrological Models Based on an Artificial Neural Network to Establish an Early Warning System in Small Catchments

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Ivana Sušanj ◽  
Nevenka Ožanić ◽  
Ivan Marović
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Early Warning ◽  
Early Warning System ◽  
Warning System ◽  
Small Scale ◽  
Ann Model ◽  
Data Value ◽  
The Mean ◽  
Artificial Neural

In some situations, there is no possibility of hazard mitigation, especially if the hazard is induced by water. Thus, it is important to prevent consequences via an early warning system (EWS) to announce the possible occurrence of a hazard. The aim and objective of this paper are to investigate the possibility of implementing an EWS in a small-scale catchment and to develop a methodology for developing a hydrological prediction model based on an artificial neural network (ANN) as an essential part of the EWS. The methodology is implemented in the case study of the Slani Potok catchment, which is historically recognized as a hazard-prone area, by establishing continuous monitoring of meteorological and hydrological parameters to collect data for the training, validation, and evaluation of the prediction capabilities of the ANN model. The model is validated and evaluated by visual and common calculation approaches and a new evaluation for the assessment. This new evaluation is proposed based on the separation of the observed data into classes based on the mean data value and the percentages of classes above or below the mean data value as well as on the performance of the mean absolute error.

Predictive Artificial Neural Network Laboratory Fatigue Endurance Limit Model for Asphalt Concrete Pavements Based on the Volumetric Properties and Loading Conditions

2021 ◽  
pp. 036119812199965
Author(s):  
Mayzan M. Isied ◽  
Mena I. Souliman ◽  
Waleed A. Zeiada ◽  
Nitish R. Bastola
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Asphalt Concrete ◽  
Endurance Limit ◽  
Volumetric Properties ◽  
Void Content ◽  
Loading Conditions ◽  
Ann Model ◽  
Artificial Neural ◽  
Fatigue Endurance

Asphalt concrete healing is one of the important concepts related to flexible pavement structures. Fatigue endurance limit (FEL) is defined as the strain limit under which no damage will be accumulated in the pavement and is directly related to asphalt healing. Pavement section designed to handle a strain value equivalent to the endurance limit (EL) strain will be considered as a perpetual pavement. All four-point bending beam fatigue testing results from the NCHRP 944-A project were extracted and utilized in the development of artificial neural network (ANN) EL strain predictive model based on mixture volumetric properties and loading conditions. ANN model architecture, as well as the prediction process of the EL strain utilizing the generated model, were presented and explained. Furthermore, a stand-alone equation that predicts the EL strain value was extracted from the developed ANN model utilizing the eclectic approach. Moreover, the EL strain value was predicted utilizing the new equation and compared with the EL strain value predicted by other prediction models available in literature. A total of 705 beam fatigue lab test data points were utilized in model training and evaluation at ratios of 70%, 15%, and 15% for training, testing, and validation, respectively. The developed model is capable of predicting the EL strain value as a function of binder grade, temperature, air void content, asphalt content, SR, failure cycles number, and rest period. The reliability of the developed stand-alone equation and the ANN model was presented by reasonable coefficient of determination (R2) value and significance value (F).

Sign in / Sign up

Export Citation Format

Share Document