Mechanically Enhanced Precipitation of Phase-Inversion Sprayed Polyurethane Scaffold May Be Used to Match Tissue Specific Anisotropy

2009 ◽  
Author(s):  
James P. Kennedy ◽  
Robert W. Hitchcock
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Cell Culture ◽  
Pore Size ◽  
Phase Inversion ◽  
Anisotropy Ratio ◽  
Material Anisotropy ◽  
Polyurethane Scaffold ◽  
Stiffness Anisotropy

Methods of creating a scaffold for tissue engineering that allow for modification of properties such as pore size, porosity, and anisotropy are essential for tissue engineering applications. For example the pore size and material anisotropy have been shown to affect cardiomyocyte elongation and alignment [1]. Phase-inversion spray polymerization (PISP) is a method for rapidly precipitating polymers onto a surface by depositing the polymer solution simultaneously with a nonsolvent, and may be used to create biocompatible scaffolds of engineered morphological and mechanical properties by varying the solubility of the polymer in the nonsolvent [2]. We report here on the fabrication of scaffolds using different nonsolvents and methods of in-process elongation that allow for control of stiffness, anisotropy ratio, porosity, and in vitro cell culture.

Effects of 3D-bioplotted polycaprolactone scaffold geometry on human adipose-derived stem cell viability and proliferation

2017 ◽  
Vol 23 (3) ◽  
pp. 534-542 ◽  
Author(s):  
Saahil V. Mehendale ◽  
Liliana F. Mellor ◽  
Michael A. Taylor ◽  
Elizabeth G. Loboa ◽  
Rohan A. Shirwaiker
Keyword(s):  
Tissue Engineering ◽  
Cell Culture ◽  
Stem Cell ◽  
Pore Size ◽  
Compression Modulus ◽  
Engineering Applications ◽  
Content Type ◽  
Musculoskeletal Tissue ◽  
Adipose Derived Stem Cell

Purpose This study aims to investigate the effect of three-dimensional (3D)- bioplotted polycaprolactone (PCL) scaffold geometry on the biological and mechanical characteristics of human adipose-derived stem cell (hASC) seeded constructs. Design/methodology/approach Four 3D-bioplotted scaffold disc designs (Ø14.5 × 2 mm) with two levels of strand–pore feature sizes and two strand laydown patterns (0°/90° or 0°/120°/240°) were evaluated for hASC viability, proliferation and construct compressive stiffness after 14 days of in vitro cell culture. Findings Scaffolds with the highest porosity (smaller strand–pore size in 0°/120°/240°) yielded the highest hASC proliferation and viability. Further testing of this design in a 6-mm thick configuration showed that cells were able to penetrate and proliferate throughout the scaffold thickness. The design with the lowest porosity (larger strand–pore size in 0°/90°) had the highest compression modulus after 14 days of culture, but resulted in the lowest hASC viability. The strand laydown pattern by itself did not influence the compression modulus of scaffolds. The 14-day cell culture also did not cause significant changes in compressive properties in any of the four designs. Originality/value hASC hold great potential for musculoskeletal tissue engineering applications because of their relative ease of harvest, abundance and differentiation abilities. This study reports on the effects of 3D-bioplotted scaffold geometry on mechanical and biological characteristics of hASC-seeded PCL constructs. The results provide the basis for future studies which will use this optimal scaffold design to develop constructs for hASC-based osteochondral tissue engineering applications.

Poly(glycerol sebacate) – a revolutionary biopolymer

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Israd H. Jaafar ◽  
Sabrina S. Jedlicka ◽  
John P. Coulter
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Cell Culture ◽  
Surface Modification ◽  
Mammalian Cell Culture ◽  
Chemical Properties ◽  
Tunable Mechanical Properties ◽  
And Chemical Properties

Abstract Novel materials possessing physical, mechanical, and chemical properties similar to those found in vivo provide a potential platform for building artificial microenvironments for tissue engineering applications. Poly(glycerol sebacate) is one such material. It has tunable mechanical properties within the range of common tissue, and favorable cell response without surface modification with adhesive ligands, and biodegradability. In this chapter, an overview of the material is presented, focusing on synthesis, characterization, microfabrication, use as a substrate in in vitro mammalian cell culture, and degradation characteristics.

scholarly journals Development of Biopolymeric Hybrid Scaffold-Based on AAc/GO/nHAp/TiO2 Nanocomposite for Bone Tissue Engineering: In-Vitro Analysis

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1319
Author(s):  
Muhammad Umar Aslam Khan ◽  
Wafa Shamsan Al-Arjan ◽  
Mona Saad Binkadem ◽  
Hassan Mehboob ◽  
Adnan Haider ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Guar Gum ◽  
Porous Scaffolds ◽  
Vitro Assay ◽  
Vitro Analysis ◽  
Nanocomposite Scaffolds

Bone tissue engineering is an advanced field for treatment of fractured bones to restore/regulate biological functions. Biopolymeric/bioceramic-based hybrid nanocomposite scaffolds are potential biomaterials for bone tissue because of biodegradable and biocompatible characteristics. We report synthesis of nanocomposite based on acrylic acid (AAc)/guar gum (GG), nano-hydroxyapatite (HAp NPs), titanium nanoparticles (TiO2 NPs), and optimum graphene oxide (GO) amount via free radical polymerization method. Porous scaffolds were fabricated through freeze-drying technique and coated with silver sulphadiazine. Different techniques were used to investigate functional group, crystal structural properties, morphology/elemental properties, porosity, and mechanical properties of fabricated scaffolds. Results show that increasing amount of TiO2 in combination with optimized GO has improved physicochemical and microstructural properties, mechanical properties (compressive strength (2.96 to 13.31 MPa) and Young’s modulus (39.56 to 300.81 MPa)), and porous properties (pore size (256.11 to 107.42 μm) and porosity (79.97 to 44.32%)). After 150 min, silver sulfadiazine release was found to be ~94.1%. In vitro assay of scaffolds also exhibited promising results against mouse pre-osteoblast (MC3T3-E1) cell lines. Hence, these fabricated scaffolds would be potential biomaterials for bone tissue engineering in biomedical engineering.

scholarly journals Effects of Encapsulated Cells on the Physical–Mechanical Properties and Microstructure of Gelatin Methacrylate Hydrogels

2019 ◽  
Vol 20 (20) ◽  
pp. 5061 ◽  
Author(s):  
Srikumar Krishnamoorthy ◽  
Behnam Noorani ◽  
Changxue Xu
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Cell Viability ◽  
Physical Properties ◽  
Pore Size ◽  
Cell Density ◽  
Tensile Modulus ◽  
Encapsulated Cells ◽  
3T3 Fibroblasts ◽  
Cell Densities

Gelatin methacrylate (GelMA) has been gaining popularity in recent years as a photo-crosslinkable biomaterial widely used in a variety of bioprinting and tissue engineering applications. Several studies have established the effects of process-based and material-based parameters on the physical–mechanical properties and microstructure of GelMA hydrogels. However, the effect of encapsulated cells on the physical–mechanical properties and microstructure of GelMA hydrogels has not been fully understood. In this study, 3T3 fibroblasts were encapsulated at different cell densities within the GelMA hydrogels and incubated over 96 h. The effects of encapsulated cells were investigated in terms of mechanical properties (tensile modulus and strength), physical properties (swelling and degradation), and microstructure (pore size). Cell viability was also evaluated to confirm that most cells were alive during the incubation. It was found that with an increase in cell density, the mechanical properties decreased, while the degradation and the pore size increased.

Biomineralization of Electrospun Nano-HA/PHB GTR Membrane

2007 ◽  
Vol 330-332 ◽  
pp. 695-698 ◽  
Author(s):  
Dong Hua Guan ◽  
Chun Peng Huang ◽  
Ji Liu ◽  
Kun Tian ◽  
Lin Niu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Electrospinning Process ◽  
Nanometer Scale ◽  
High Porosity ◽  
The Novel ◽  
Mineral Crystal ◽  
Novel Technology ◽  
Air Jet

Poly 3-hydroxybutyrate (PHB) as a kind of polysaccharides has been proved promising for tissue engineering because of its biocompatibility and biodegradability. But its poor mechanical properties and hydrophilicity limit its application. In order to explore a new useful porch to improve the performance of PHB-based GTR membrane, membrane composed of nano-HA / PHB composite was manufactured through the air/jet electrospinning process which can potentially generate nanometer scale diameter fibers and enlarge surface area of materials while maintaining high porosity. Successively, the biomineralization behavior of the membrane in supersaturated calcification solution (SCS) was studied. The Results of this investigation show that the successfully manufactured porous nano-HA/PHB membrane has high activity in SCS and its ability of inducing the formation of mineral crystal in vitro than that of the unfilled PHB membrane. It can be concluded that the addition of nano-HA and the novel technology could improve the performance of the PHB-based GTR membrane.

Preparation and Characterization of Ha/Gel/β-TCP Microspheres Composite Porous Scaffold

2018 ◽  
Vol 782 ◽  
pp. 103-115
Author(s):  
Yang Zi Zhao ◽  
You Fa Wang
Keyword(s):  
Tissue Engineering ◽  
Compressive Strength ◽  
Hyaluronic Acid ◽  
Pore Size ◽  
Porous Scaffold ◽  
Three Dimensional ◽  
Swelling Ratio ◽  
Cell Compatibility ◽  
Hydrogel Scaffolds

Being one of the three elements of tissue engineering, three-dimensional porous structure scaffold plays an important role in tissue engineering. As it not only prvovide cells for the life, but also serves as a template to guide tissue regeneration and control of organizational structure and other functions. In this study, hyaluronic acid and gelatin are successfully cross-linked by 1-ethyl- (3-dimethylaminopropyl) -carbodiimide hydrochloride (EDC) , and compound β-TCP microspheres to prepare porous hydrogel scaffolds. The microspheres were analyzed by X-ray diffraction (XRD). The scaffolds were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). At the same time, the compressive strength, swelling ratio, degradation of the scaffold were tested. To assess the in vitro cell compatibility of the scaffolds, mouse L929 fibroblasts were seeded onto scaffolds for cell morphology and cell viability studies. The results showed that the pore size of the porous scaffold can be adjusted by changing the ratio of gelatin to hyaluronic acid (HA), increasing the proportion of hyaluronic acid in a certain range, pore size will be significantly increased. With the increase of the proportion of hyaluronic acid in the scaffold, the swelling ratio and the degradation rate also increased. The compressive strength of the scaffold increased with the increase of the proportion of gelatin. The appropriate ratio of β-TCP can promote cell growth and proliferation.

scholarly journals Effect of Melt-Derived Bioactive Glass Particles on the Properties of Chitosan Scaffolds

2019 ◽  
Vol 10 (3) ◽  
pp. 38 ◽  
Author(s):  
Hamasa Faqhiri ◽  
Markus Hannula ◽  
Minna Kellomäki ◽  
Maria Teresa Calejo ◽  
Jonathan Massera
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bioactive Glass ◽  
Pore Size ◽  
Glass Content ◽  
Micro Computed Tomography ◽  
Glass Composite ◽  
Composite Scaffolds ◽  
Bioactive Glasses

This study reports on the processing of three-dimensional (3D) chitosan/bioactive glass composite scaffolds. On the one hand, chitosan, as a natural polymer, has suitable properties for tissue engineering applications but lacks bioactivity. On the other hand, bioactive glasses are known to be bioactive and to promote a higher level of bone formation than any other biomaterial type. However, bioactive glasses are hard, brittle, and cannot be shaped easily. Therefore, in the past years, researchers have focused on the processing of new composites. Difficulties in reaching composite materials made of polymer (synthetic or natural) and bioactive glass include: (i) The high glass density, often resulting in glass segregation, and (ii) the fast bioactive glass reaction when exposed to moisture, leading to changes in the glass reactivity and/or change in the polymeric matrix. Samples were prepared with 5, 15, and 30 wt% of bioactive glass S53P4 (BonAlive ®), as confirmed using thermogravimetric analysis. MicrO–Computed tomography and optical microscopy revealed a flaky structure with porosity over 80%. The pore size decreased when increasing the glass content up to 15 wt%, but increased back when the glass content was 30 wt%. Similarly, the mechanical properties (in compression) of the scaffolds increased for glass content up to 15%, but decreased at higher loading. Ions released from the scaffolds were found to lead to precipitation of a calcium phosphate reactive layer at the scaffold surface. This is a first indication of the potential bioactivity of these materials. Overall, chitosan/bioactive glass composite scaffolds were successfully produced with pore size, machinability, and ability to promote a calcium phosphate layer, showing promise for bone tissue engineering and the mechanical properties can justify their use in non-load bearing applications.

Functional Tissue Engineering: The Role of Biomechanics

2000 ◽  
Vol 122 (6) ◽  
pp. 570-575 ◽  
Author(s):  
David L. Butler ◽  
Steven A. Goldstein ◽  
Farshid Guilak
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physical Factors ◽  
Cellular Activity ◽  
Biosynthetic Activity ◽  
Functional Tissue Engineering ◽  
Functional Tissue ◽  
Engineered Tissues

“Tissue engineering” uses implanted cells, scaffolds, DNA, protein, and/or protein fragments to replace or repair injured or diseased tissues and organs. Despite its early success, tissue engineers have faced challenges in repairing or replacing tissues that serve a predominantly biomechanical function. An evolving discipline called “functional tissue engineering” (FTE) seeks to address these challenges. In this paper, the authors present principles of functional tissue engineering that should be addressed when engineering repairs and replacements for load-bearing structures. First, in vivo stress/strain histories need to be measured for a variety of activities. These in vivo data provide mechanical thresholds that tissue repairs/replacements will likely encounter after surgery. Second, the mechanical properties of the native tissues must be established for subfailure and failure conditions. These “baseline data” provide parameters within the expected thresholds for different in vivo activities and beyond these levels if safety factors are to be incorporated. Third, a subset of these mechanical properties must be selected and prioritized. This subset is important, given that the mechanical properties of the designs are not expected to completely duplicate the properties of the native tissues. Fourth, standards must be set when evaluating the repairs/replacements after surgery so as to determine, “how good is good enough?” Some aspects of the repair outcome may be inferior, but other mechanical characteristics of the repairs and replacements might be suitable. New and improved methods must also be developed for assessing the function of engineered tissues. Fifth, the effects of physical factors on cellular activity must be determined in engineered tissues. Knowing these signals may shorten the iterations required to replace a tissue successfully and direct cellular activity and phenotype toward a desired end goal. Finally, to effect a better repair outcome, cell-matrix implants may benefit from being mechanically stimulated using in vitro “bioreactors” prior to implantation. Increasing evidence suggests that mechanical stress, as well as other physical factors, may significantly increase the biosynthetic activity of cells in bioartificial matrices. Incorporating each of these principles of functional tissue engineering should result in safer and more efficacious repairs and replacements for the surgeon and patient. [S0148-0731(00)00206-5]

scholarly journals An Assessment of Cell Culture Plate Surface Chemistry for in Vitro Studies of Tissue Engineering Scaffolds

2015 ◽  
Vol 6 (4) ◽  
pp. 1054-1063 ◽  
Author(s):  
Alexander Röder ◽  
Elena García-Gareta ◽  
Christina Theodoropoulos ◽  
Nikola Ristovski ◽  
Keith Blackwood ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cell Culture ◽  
Surface Chemistry ◽  
In Vitro Studies ◽  
Plate Surface ◽  
Tissue Engineering Scaffolds ◽  
Culture Plate
Sign in / Sign up

Export Citation Format

Share Document