Experimental Modal Analysis of Fractal-Inspired Multi-Frequency Piezoelectric Energy Converters

2011 ◽  
Author(s):  
D. Castagnetti
Keyword(s):  
Energy Harvesting ◽  
Piezoelectric Materials ◽  
Computational Simulation ◽  
Ambient Vibration ◽  
Thin Plates ◽  
Piezoelectric Energy Harvesting ◽  
Frequency Range ◽  
Piezoelectric Energy ◽  
Modal Response ◽  
Piezoelectric Converter

An important issue in the field of energy harvesting through piezoelectric materials is the design of simple and efficient structures which are multi-frequency in the ambient vibration range. This paper deals with the experimental assessment of four fractal-inspired multi-frequency structures for piezoelectric energy harvesting. These structures, thin plates of square shape, were proposed and numerically analyzed, with regard to their modal response, in a previous work by the author. The aim of this work is twofold. First, to assess the modal response of these structures through an experimental investigation. Second, to evaluate, through computational simulation, the performance of a piezoelectric converter prototype relying on one of these fractal-inspired structures. The four fractal-inspired structures are examined experimentally in the range between 0 and 100 Hz, both with regard to eigenfrequencies and eigenmodes. In the same frequency range are investigated the modal response and power output of a converter prototype.

Fractional Order Model of Broadband Piezoelectric Energy Harvesters

2015 ◽  
Author(s):  
Dan Li ◽  
Junyi Cao ◽  
Shengxi Zhou ◽  
Yangquan Chen
Keyword(s):  
Energy Harvesting ◽  
Fractional Order ◽  
Piezoelectric Materials ◽  
Ambient Vibration ◽  
Piezoelectric Energy Harvesting ◽  
Order Model ◽  
Piezoelectric Energy ◽  
Fractional Order Model ◽  
Electromechanical Interaction ◽  
Environmental Vibration

This paper presents a factional model for broadband piezoelectric energy harvesting systems. Piezoelectric materials pay a significant role in harvesting ambient vibration energy. Due to their inherent characteristics and electromechanical interaction effect, piezoelectric energy harvesting exhibits the hysteresis characteristic under sweeping environmental vibration. Fractional order model of piezoelectric energy harvesting could capture the hysteresis characteristics. Simulation and experimental results show that fractional model of piezoelectric energy harvesting is more effective in describing the system dynamic.

scholarly journals A State-Of-The-Art Review of Car Suspension-Based Piezoelectric Energy Harvesting Systems

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2336 ◽  
Author(s):  
Doaa Al-Yafeai ◽  
Tariq Darabseh ◽  
Abdel-Hamid I. Mourad
Keyword(s):  
Energy Harvesting ◽  
State Of The Art ◽  
Piezoelectric Materials ◽  
Clean Energy ◽  
Ambient Vibration ◽  
Dissipated Energy ◽  
Piezoelectric Energy Harvesting ◽  
Piezoelectric Energy ◽  
Harvesting Technique ◽  
Harvesting Systems

One of the most important techniques for energy harvesting is the clean energy collection from the ambient vibration. Piezoelectric energy harvesting systems became a hot topic in the literature and attracted most researchers. The reason behind this attraction is that piezoelectric materials are a simple structure and provide a higher power density among other mechanisms (electromagnetic and electrostatic). The aim of this manuscript is to succinctly review and present the state of the art of different existing vibrational applications utilizing piezoelectric energy harvesting technique. Meanwhile, the main concentration is harvesting energy from a vehicle suspension system. There is a significant amount of dissipated energy from the suspension dampers that is worthy of being harvested. Different mathematical car models with their experimental setup are presented, discussed, and compared. The piezoelectric material can be mounted in different locations such as suspension springs, dampers, and tires. The technique of implementing the harvester and the amount of power harvested from each location are analyzed. The evaluation of the electrical harvesting circuits and different storage devices for the harvested power are also discussed. The paper will also shed light on the variety of potential applications of the harvested energy.

scholarly journals Modeling of Piezoelectric Energy Harvesting from Freely Oscillating Cylinders in Water Flow

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Min Zhang ◽  
YingZheng Liu ◽  
ZhaoMin Cao
Keyword(s):  
Energy Harvesting ◽  
Free Stream ◽  
Piezoelectric Materials ◽  
Load Resistance ◽  
Stream Velocity ◽  
Piezoelectric Energy Harvesting ◽  
Vibratory System ◽  
System Parameters ◽  
Piezoelectric Energy ◽  
Vortex Induced Vibrations

A concept of energy harvesting from vortex-induced vibrations of a rigid circular cylinder with two piezoelectric beams attached is investigated. The variations of the power levels with the free stream velocity are determined. A mathematical approach including the coupled cylinder motion and harvested voltage is presented. The effects of the load resistance, piezoelectric materials, and circuit combined on the natural frequency and damping of the vibratory system are determined by performing a linear analysis. The dynamic response of the cylinder and harvested energy are investigated. The results show that the harvested level in SS and SP&PS modes is the same with different values of load resistance. For four different system parameters, the results show that the bigger size of cylinder with PZT beams can obtain the higher harvested power.

Topology Optimization of Piezoelectric Energy Harvesting Devices Subjected to Stochastic Excitation

2010 ◽  
Author(s):  
Zheqi Lin ◽  
Hae Chang Gea ◽  
Shutian Liu
Keyword(s):  
Topology Optimization ◽  
Energy Harvesting ◽  
Electrical Energy ◽  
Ambient Vibration ◽  
Piezoelectric Energy Harvesting ◽  
The Past ◽  
Piezoelectric Energy ◽  
Random Responses ◽  
Pseudo Excitation ◽  
Energy Harvesting Devices

Converting ambient vibration energy into electrical energy using piezoelectric energy harvester has attracted much interest in the past decades. In this paper, topology optimization is applied to design the optimal layout of the piezoelectric energy harvesting devices. The objective function is defined as to maximize the energy harvesting performance over a range of ambient vibration frequencies. Pseudo excitation method (PEM) is applied to analyze structural stationary random responses. Sensitivity analysis is derived by the adjoint method. Numerical examples are presented to demonstrate the validity of the proposed approach.

Mechanistic Modeling and Economic Analysis of Piezoelectric Energy Harvesting Potential in Airport Pavements

2020 ◽  
Vol 2674 (11) ◽  
pp. 64-75
Author(s):  
Jingnan Zhao ◽  
Hao Wang
Keyword(s):  
Energy Harvesting ◽  
Economic Analysis ◽  
Power Output ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Mechanistic Modeling ◽  
Piezoelectric Energy Harvesting ◽  
Levelized Cost Of Electricity ◽  
Near Surface ◽  
Piezoelectric Energy

This study investigated the feasibility of applying piezoelectric energy harvesting technology in airfield pavements through mechanistic modeling and economic analysis. The energy harvesting performance of piezoelectric transducers was evaluated based on mechanical energy induced by multi-wheel aircraft loading on flexible airfield pavements. A three-dimensional finite element model was used to estimate the stress pulse and magnitude under moving aircraft tire loading. A stack piezoelectric transducer design was used to estimate the power output of a piezoelectric harvester embedded at different locations and depths in the pavement. The aircraft load and speed were found to be vital factors affecting the power output, along with the installation depth and horizontal locations of the energy harvester. On the other hand, the installation of the energy module had a negligible influence on the horizontal tensile strains at the bottom of the asphalt layer and compressive strains on the top of the subgrade. However, the near-surface pavement strains increased when the edge ribs of the tire were loaded on the energy module. Feasibility analysis results showed that the calculated levelized cost of electricity was high in general, although it varies depending on the airport traffic levels and the service life of the energy module. With the development of piezoelectric materials and technology, further evaluation of energy harvesting applications at airports needs to be conducted.

Multiple Patch-Based Piezoelectric Energy Harvesting From Multiple Vibration Modes of Thin Plates

2013 ◽  
Author(s):  
Ugur Aridogan ◽  
Ipek Basdogan ◽  
Alper Erturk
Keyword(s):  
Energy Harvesting ◽  
Thin Plates ◽  
Aluminum Plate ◽  
Piezoelectric Energy Harvesting ◽  
Vibration Modes ◽  
Piezoelectric Energy ◽  
Wide Range ◽  
Resistive Loads ◽  
Experimental Validations ◽  
Piezoelectric Cantilevers

Vibration-based energy harvesting using cantilevered piezoelectric beam has been extensively studied over the last decade. In this study, as an alternative to resonant piezoelectric cantilevers, we studied multiple patch-based piezoelectric energy harvesting from multiple vibration modes of thin plates. Analytical electroelastic model of the multiple patch-based piezoelectric harvesters attached on a thin plate is provided based on distributed-parameter modeling approach for series and parallel configurations of the patches. An experimental setup is built with series-configuration of double patch-based harvesters attached on the surfaces of all-four-edges clamped (CCCC) rectangular aluminum plate. Analytical simulations and experimental validations of power generation of the harvesters are performed in a case study. The experimental and analytical frequency response functions (FRF) relating voltage output and vibration response to force input are obtained. The analytical model is validated by comparing analytical and experimental FRFs for a wide range of resistive electrical boundary conditions. The harvested power output across the various resistive loads is explored with a focus on the first four modes of the aluminum plate. Experimental and analytical results are shown to be in agreement for multiple patch-based piezoelectric energy harvesting from multiple vibration modes of thin plates.

Piezoelectric Energy Harvesting for Powering Micro Electromechanical Systems (MEMS)

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
A. Majeed
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Piezoelectric Materials ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Wireless Technology ◽  
Power Devices ◽  
Piezoelectric Energy ◽  
Technical Innovations ◽  
Low Power Electronics

Recent advancements in wireless technology and low power electronics such as micro electrome-chanical systems (MEMS), have created a surge of technical innovations in the eld of energy har-vesting. Piezoelectric materials, which operate on vibrations surrounding the system have becomehighly useful in terms of energy harvesting. Piezoelectricity is the ability to transform mechanicalstrain energy, mostly vibrations, to electrical energy, which can be used to power devices. This paperwill focus on energy harvesting by piezoelectricity and how it can be incorporated into various lowpower devices and explain the ability of piezoelectric materials to function as self-charging devicesthat can continuously supply power to a device and will not require any battery for future processes.

scholarly journals A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits

2019 ◽  
Vol 4 (1) ◽  
pp. 3-39 ◽  
Author(s):  
Shashank Priya ◽  
Hyun-Cheol Song ◽  
Yuan Zhou ◽  
Ronnie Varghese ◽  
Anuj Chopra ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Power Management ◽  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Low Frequency ◽  
Small Scale ◽  
Piezoelectric Energy Harvesting ◽  
Wide Bandwidth ◽  
Piezoelectric Energy ◽  
Continuous Power

Abstract Piezoelectric microelectromechanical systems (PiezoMEMS) are attractive for developing next generation self-powered microsystems. PiezoMEMS promises to eliminate the costly assembly for microsensors/microsystems and provide various mechanisms for recharging the batteries, thereby, moving us closer towards batteryless wireless sensors systems and networks. In order to achieve practical implementation of this technology, a fully assembled energy harvester on the order of a quarter size dollar coin (diameter=24.26 mm, thickness=1.75 mm) should be able to generate about 100 μW continuous power from low frequency ambient vibrations (below 100 Hz). This paper reviews the state-of-the-art in microscale piezoelectric energy harvesting, summarizing key metrics such as power density and bandwidth of reported structures at low frequency input. This paper also describes the recent advancements in piezoelectric materials and resonator structures. Epitaxial growth and grain texturing of piezoelectric materials is being developed to achieve much higher energy conversion efficiency. For embedded medical systems, lead-free piezoelectric thin films are being developed and MEMS processes for these new classes of materials are being investigated. Non-linear resonating beams for wide bandwidth resonance are also reviewed as they would enable wide bandwidth and low frequency operation of energy harvesters. Particle/granule spray deposition techniques such as aerosol-deposition (AD) and granule spray in vacuum (GSV) are being matured to realize the meso-scale structures in a rapid manner. Another important element of an energy harvester is a power management circuit, which should maximize the net energy harvested. Towards this objective, it is essential for the power management circuit of a small-scale energy harvester to dissipate minimal power, and thus it requires special circuit design techniques and a simple maximum power point tracking scheme. Overall, the progress made by the research and industrial community has brought the energy harvesting technology closer to the practical applications in near future.

Performance of lead-free piezoelectric materials in cantilever-based energy harvesting devices

2014 ◽  
Vol 03 (02) ◽  
pp. 1450010 ◽  
Author(s):  
Anuruddh Kumar ◽  
Rajeev Kumar ◽  
Vishal S. Chauhan ◽  
Rahul Vaish
Keyword(s):  
Energy Harvesting ◽  
Power Density ◽  
Lead Zirconate Titanate ◽  
Piezoelectric Materials ◽  
Lead Zirconate ◽  
Lead Free ◽  
Frequency Range ◽  
Mean Power ◽  
Piezoelectric Energy ◽  
Energy Harvesting Devices

Energy harvesting is one of the emerging applications of piezoelectric materials. In order to replace conventional lead-based materials with lead-free materials, it is important to evaluate their performance for such applications. In the present study, finite element method-based simulation shows mean power density produced from ( K 0.475 Na 0.475 Li 0.05)( Nb 0.92 Ta 0.05 Sb 0.03) O 3 add with 0.4 wt.% CeO 2 and 0.4 wt.% MnO 2 (KNLNTS) bimorph is 96.64% of lead zirconate titanate ( Pb [ Zr x Ti 1-x] O 3) (PZT) ceramics. Load resistance (R), length of proof mass (Lm) and thickness of host layer (th) are optimized (using genetic algorithm) for maximum power density and tuning the operating frequency range which is near to natural frequency of the structure. The lead-free piezoelectric material KNLNTS has comparable results to that of PZT for piezoelectric energy harvester in the ambient frequency range of 90 Hz to 110 Hz. Results show that KNLNTS ceramics can be potentially used in energy harvesting devices.

Sign in / Sign up

Export Citation Format

Share Document