scholarly journals Quaternized Chitosan InhibitsicaATranscription and Biofilm Formation byStaphylococcuson a Titanium Surface

2010 ◽  
Vol 55 (2) ◽  
pp. 860-866 ◽  
Author(s):  
Zhao-Xiang Peng ◽  
Bing Tu ◽  
Yang Shen ◽  
Lin Du ◽  
Ling Wang ◽  
...  
Keyword(s):  
Staphylococcus Epidermidis ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Titanium Surface ◽  
Water Soluble ◽  
Laser Scanning Microscopy ◽  
Extracellular Polysaccharides ◽  
Confocal Laser ◽  
Trimethylammonium Chloride ◽  
Orthopedic Implant

ABSTRACTOur previous study (Z. X. Peng et al., Carbohydr. Polym.81:275-283, 2010) demonstrated that water-soluble quaternary ammonium salts, which are produced by the reaction of chitosan with glycidyl trimethylammonium chloride, provide chitosan derivatives with enhanced antibacterial ability. Because biofilm formation is believed to comprise the key step in the development of orthopedic implant-related infections, we further evaluated the efficacy of hydroxypropyltrimethyl ammonium chloride chitosan (HACC) with different degrees of substitution (DS; referred to as HACC 6%, 18%, and 44%) in preventing biofilm formation on a titanium surface. We used a tissue culture plate method to quantify the biomass ofStaphylococcus epidermidisandStaphylococcus aureusbiofilms and found that HACC, especially HACC 18% and 44%, significantly inhibited biofilm formation compared to the untreated control, even at concentrations far below their MICs (P< 0.05). Scanning electron microscopy showed that inhibition of biofilm formation on titanium increased dramatically with increased DS and HACC concentrations. Confocal laser scanning microscopy indicated that growth of a preexisting biofilm on titanium was inhibited by concentrations of HACC 18% and 44% below their minimum biofilm eradication concentrations. We also demonstrated that HACC inhibited the expression oficaA, which mediates the production of extracellular polysaccharides, both in new biofilms and in preexisting biofilms on titanium. Our results indicate that HACC may serve as a new antibacterial agent to inhibit biofilm formation and prevent orthopedic implant-related infections.

scholarly journals Effects of cigarette smoking on the growth of Streptococcus mutans biofilms: an in vitro study

2021 ◽  
Author(s):  
Ye Han
Keyword(s):  
Treatment Group ◽  
Cigarette Smoking ◽  
Streptococcus Mutans ◽  
Laser Scanning ◽  
Water Soluble ◽  
Laser Scanning Microscopy ◽  
Extracellular Polysaccharides ◽  
Confocal Laser ◽  
Control Group

Abstract This study aimed to investigate the differences in growth and virulence (EPSs and acidogenicity) of Streptococcus mutans biofilms (S. mutans) according to the different times of cigarette smoking (CS) treatment. S. mutans biofilms (74-hour-old) were formed on saliva-coated hydroxyapatite disks. The biofilms were treated with CS at different times per day (one time, three times, and six times/day). The control group did not receive CS treatment. Acidogenicity, dry weight, colony-forming units, water-soluble/insoluble extracellular polysaccharides, and intracellular polysaccharides were analyzed and confocal laser scanning microscopy images were obtained of the 74-h-old biofilms. The 74-h-old biofilms on sHA discs in the 6 times/day CS treatment group showed the lowest biofilm accumulation and extracellular polysaccharide amount compared with the control group and other CS treatment groups. In the CLSM study, the biofilms in the six times/day CS treatment group also showed the lowest bacterial count (live and dead cells) and EPS biovolume. CS has an obvious inhibition on the growth of S. mutans biofilms, the degree of inhibition is proportional to the number of CS treatments.

scholarly journals Effect of Cinnamon Oil on icaA Expression and Biofilm Formation by Staphylococcus epidermidis

2009 ◽  
Vol 75 (21) ◽  
pp. 6850-6855 ◽  
Author(s):  
Titik Nuryastuti ◽  
Henny C. van der Mei ◽  
Henk J. Busscher ◽  
Susi Iravati ◽  
Abu T. Aman ◽  
...  
Keyword(s):  
Staphylococcus Epidermidis ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Antimicrobial Agents ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Pcr Analysis ◽  
Minimal Bactericidal Concentration ◽  
Cinnamon Oil ◽  
Broth Microdilution Method

ABSTRACT Staphylococcus epidermidis is notorious for its biofilm formation on medical devices, and novel approaches to prevent and kill S. epidermidis biofilms are desired. In this study, the effect of cinnamon oil on planktonic and biofilm cultures of clinical S. epidermidis isolates was evaluated. Initially, susceptibility to cinnamon oil in planktonic cultures was compared to the commonly used antimicrobial agents chlorhexidine, triclosan, and gentamicin. The MIC of cinnamon oil, defined as the lowest concentration able to inhibit visible microbial growth, and the minimal bactericidal concentration, the lowest concentration required to kill 99.9% of the bacteria, were determined using the broth microdilution method and plating on agar. A checkerboard assay was used to evaluate the possible synergy between cinnamon oil and the other antimicrobial agents. The effect of cinnamon oil on biofilm growth was studied in 96-well plates and with confocal laser-scanning microscopy (CLSM). Biofilm susceptibility was determined using a metabolic 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay. Real-time PCR analysis was performed to determine the effect of sub-MIC concentrations of cinnamon oil on expression of the biofilm-related gene, icaA. Cinnamon oil showed antimicrobial activity against both planktonic and biofilm cultures of clinical S. epidermidis strains. There was only a small difference between planktonic and biofilm MICs, ranging from 0.5 to 1% and 1 to 2%, respectively. CLSM images indicated that cinnamon oil is able to detach and kill existing biofilms. Thus, cinnamon oil is an effective antimicrobial agent to combat S. epidermidis biofilms.

scholarly journals The vicK gene of Streptococcus mutans mediates its cariogenicity via exopolysaccharides metabolism

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Yalan Deng ◽  
Yingming Yang ◽  
Bin Zhang ◽  
Hong Chen ◽  
Yangyu Lu ◽  
...  
Keyword(s):  
Dental Caries ◽  
Streptococcus Mutans ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Single Species ◽  
Laser Scanning Microscopy ◽  
Gas Chromatography Mass Spectrometry ◽  
Extracellular Polysaccharides ◽  
Confocal Laser

AbstractStreptococcus mutans (S. mutans) is generally regarded as a major contributor to dental caries because of its ability to synthesize extracellular polysaccharides (EPS) that aid in the formation of plaque biofilm. The VicRKX system of S. mutans plays an important role in biofilm formation. The aim of this study was to investigate the effects of vicK gene on specific characteristics of EPS in S. mutans biofilm. We constructed single-species biofilms formed by different mutants of vicK gene. Production and distribution of EPS were detected through atomic force microscopy, scanning electron microscopy and confocal laser scanning microscopy. Microcosmic structures of EPS were analyzed by gel permeation chromatography and gas chromatography-mass spectrometry. Cariogenicity of the vicK mutant was assessed in a specific pathogen-free rat model. Transcriptional levels of cariogenicity-associated genes were confirmed by quantitative real-time polymerase chain reaction. The results showed that deletion of vicK gene suppressed biofilm formation as well as EPS production, and EPS were synthesized mostly around the cells. Molecular weight and monosaccharide components underwent evident alterations. Biofilms formed in vivo were sparse and contributed a decreased degree of caries. Moreover, expressional levels of genes related to EPS synthesis were down-regulated, except for gtfB. Our report demonstrates that vicK gene enhances biofilm formation and subsequent caries development. And this may due to its regulations on EPS metabolism, like synthesis or microcosmic features of EPS. This study suggests that vicK gene and EPS can be considered as promising targets to modulate dental caries.

scholarly journals Nicotine Enhances Interspecies Relationship betweenStreptococcus mutansandCandida albicans

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Shiyu Liu ◽  
Wei Qiu ◽  
Keke Zhang ◽  
Xuedong Zhou ◽  
Biao Ren ◽  
...  
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Extracellular Polysaccharides ◽  
Confocal Laser ◽  
Fungal Cell ◽  
Biofilm Model ◽  
Structure Synthesis ◽  
Biofilm Structure ◽  
Synergistic Relationship

Streptococcus mutansandCandida albicansare common microorganisms in the human oral cavity. The synergistic relationship between these two species has been deeply explored in many studies. In the present study, the effect of alkaloid nicotine on the interspecies betweenS. mutansandC. albicansis explored. We developed a dual-species biofilm model and studied biofilm biomass, biofilm structure, synthesis of extracellular polysaccharides (EPS), and expression of glucosyltransferases (Gtfs). Biofilm formation and bacterial and fungal cell numbers in dual-species biofilms increased in the presence of nicotine. MoreC. albicanscells were present in the dual-species biofilms in the nicotine-treated groups as determined by scanning electron microscopy. The synthesis of EPS was increased by 1 mg/ml of nicotine as detected by confocal laser scanning microscopy. The result of qRT-PCR showedgtfsexpression was upregulated when 1 mg/ml of nicotine was used. We speculate that nicotine promoted the growth ofS. mutans, and moreS. mutanscells attracted moreC. albicanscells due to the interaction between two species. SinceS. mutansandC. albicansare putative pathogens for dental caries, the enhancement of the synergistic relationship by nicotine may contribute to caries development in smokers.

scholarly journals Electric Current-Induced Detachment of Staphylococcus epidermidis Biofilms from Surgical Stainless Steel

2004 ◽  
Vol 70 (11) ◽  
pp. 6871-6874 ◽  
Author(s):  
Arnout J. van der Borden ◽  
Hester van der Werf ◽  
Henny C. van der Mei ◽  
Henk J. Busscher
Keyword(s):  
Stainless Steel ◽  
Staphylococcus Epidermidis ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Electric Currents ◽  
Experimental Conditions ◽  
Current Application ◽  
Percutaneous Implants

ABSTRACT Biomaterial-centered infections of orthopedic percutaneous implants are serious complications which can ultimately lead to osteomyelitis, with devastating effects on bone and surrounding tissues, especially since the biofilm mode of growth offers protection against antibiotics and since removal frequently is the only ultimate solution. Recently, it was demonstrated that as a possible pathway to prevent infections of percutaneous stainless steel implants, electric currents of 60 to 100 μA were effective at stimulating the detachment of initially adhering staphylococci from surgical stainless steel. However, initially adhering bacteria are known to adhere more reversibly than bacteria growing in the later stages of biofilm formation. Hence, the aim of this study was to examine whether a growing Staphylococcus epidermidis biofilm can be stimulated to detach from surgical stainless steel by the use of electric currents. In separate experiments, four currents, i.e., 60 and 100 μA of direct current (DC) and 60 and 100 μA of block current (50% duty cycle, 1 Hz), were applied for 360 min to stimulate the detachment of an S. epidermidis biofilm that had grown for 200 min. A 100-μA DC yielded 78% detachment, whereas a 100-μA block current under the same experimental conditions yielded only 31% detachment. The same trend was found for 60 μA, with 37% detachment for a DC and 24% for a block current. Bacteria remaining on the surface after the current application were less viable than they were prior to the current application, as demonstrated by confocal laser scanning microscopy. In conclusion, these results suggest that DCs are preferred for curing infections.

Confocal and SEM imaging to demonstrate food pathogen- biofilm biocontrol by pyocyanin from Pseudomonas aeruginosa BTRY1

2016 ◽  
Vol 6 (01) ◽  
pp. 5218
Author(s):  
Laxmi Mohandas ◽  
Anju T. R. ◽  
Sarita G. Bhat*
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Antibiofilm Activity ◽  
Opportunistic Pathogens ◽  
Redox Active ◽  
Sem Imaging ◽  
The Impact

An assortment of redox-active phenazine compounds like pyocyanin with their characteristic blue-green colour are synthesized by Pseudomonas aeruginosa, Gram-negative opportunistic pathogens, which are also considered one of the most commercially valuable microorganisms. In this study, pyocyanin from Pseudomonas aeruginosa BTRY1 from food sample was assessed for its antibiofilm activity by micro titer plate assay against strong biofilm producers belonging to the genera Bacillus, Staphylococcus, Brevibacterium and Micrococcus. Pyocyanin inhibited biofilm activity in very minute concentrations. This was also confirmed by Scanning Electron Microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM). Both SEM and CLSM helped to visualize the biocontrol of biofilm formation by eight pathogens. The imaging and quantification by CLSM also established the impact of pyocyanin on biofilm-biocontrol mainly in the food industry.

scholarly journals Influence of Salt Support Structures on Material Jetted Aluminum Parts

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4072
Author(s):  
Benedikt Kirchebner ◽  
Maximilian Ploetz ◽  
Christoph Rehekampff ◽  
Philipp Lechner ◽  
Wolfram Volk
Keyword(s):  
Molten Salts ◽  
Laser Scanning ◽  
Water Soluble ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Support Structures ◽  
Micro Hardness ◽  
X Ray ◽  
Melting Temperatures ◽  
Economic Support

Like most additive manufacturing processes for metals, material jetting processes require support structures in order to attain full 3D capability. The support structures have to be removed in subsequent operations, which increases costs and slows down the manufacturing process. One approach to this issue is the use of water-soluble support structures made from salts that allow a fast and economic support removal. In this paper, we analyze the influence of salt support structures on material jetted aluminum parts. The salt is applied in its molten state, and because molten salts are typically corrosive substances, it is important to investigate the interaction between support and build material. Other characteristic properties of salts are high melting temperatures and low thermal conductivity, which could potentially lead to remelting of already printed structures and might influence the microstructure of aluminum that is printed on top of the salt due to low cooling rates. Three different sample geometries have been examined using optical microscopy, confocal laser scanning microscopy, energy-dispersive X-ray spectroscopy and micro-hardness testing. The results indicate that there is no distinct influence on the process with respect to remelting, micro-hardness and chemical reactions. However, a larger dendrite arm spacing is observed in aluminum that is printed on salt.

scholarly journals Bacterial lipopolysaccharides variably modulate in vitro biofilm formation of Candida species

2010 ◽  
Vol 59 (10) ◽  
pp. 1225-1234 ◽  
Author(s):  
H. M. H. N. Bandara ◽  
O. L. T. Lam ◽  
R. M. Watt ◽  
L. J. Jin ◽  
L. P. Samaranayake
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Significant Inhibition ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dependent Manner ◽  
Bacterial Lipopolysaccharides ◽  
Species Specific ◽  
Biofilm Development

The objective of this study was to evaluate the effect of the bacterial endotoxin LPS on Candida biofilm formation in vitro. The effect of the LPS of Pseudomonas aeruginosa, Klebsiella pneumoniae, Serratia marcescens and Salmonella typhimurium on six different species of Candida, comprising Candida albicans ATCC 90028, Candida glabrata ATCC 90030, Candida krusei ATCC 6258, Candida tropicalis ATCC 13803, Candida parapsilosis ATCC 22019 and Candida dubliniensis MYA 646, was studied using a standard biofilm assay. The metabolic activity of in vitro Candida biofilms treated with LPS at 90 min, 24 h and 48 h was quantified by XTT reduction assay. Viable biofilm-forming cells were qualitatively analysed using confocal laser scanning microscopy (CLSM), while scanning electron microscopy (SEM) was employed to visualize the biofilm structure. Initially, adhesion of C. albicans was significantly stimulated by Pseudomonas and Klebsiella LPS. A significant inhibition of Candida adhesion was noted for the following combinations: C. glabrata with Pseudomonas LPS, C. tropicalis with Serratia LPS, and C. glabrata, C. parapsilosis or C. dubliniensis with Salmonella LPS (P<0.05). After 24 h of incubation, a significant stimulation of initial colonization was noted for the following combinations: C. albicans/C. glabrata with Klebsiella LPS, C. glabrata/C. tropicalis/C. krusei with Salmonella LPS. In contrast, a significant inhibition of biofilm formation was observed in C. glabrata/C. dubliniensis/C. krusei with Pseudomonas LPS, C. krusei with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. parapsilosis/C. dubliniensis /C. krusei with Salmonella LPS (P<0.05). On further incubation for 48 h, a significant enhancement of biofilm maturation was noted for the following combinations: C. glabrata/C. tropicalis with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. glabrata with Salmonella LPS, and a significant retardation was noted for C. parapsilosis/C. dubliniensis/C. krusei with Pseudomonas LPS, C. tropicalis with Serratia LPS, C. glabrata/C. parapsilosis/C. dubliniensis with Klebsiella LPS and C. dubliniensis with Salmonella LPS (P<0.05). These findings were confirmed by SEM and CLSM analyses. In general, the inhibition of the biofilm development of LPS-treated Candida spp. was accompanied by a scanty architecture with a reduced numbers of cells compared with the profuse and densely colonized control biofilms. These data are indicative that bacterial LPSs modulate in vitro Candida biofilm formation in a species-specific and time-dependent manner. The clinical and the biological relevance of these findings have yet to be explored.

scholarly journals Using micro-patterned surfaces to inhibit settlement and biofilm formation by Bacillus subtilis

2017 ◽  
Vol 63 (7) ◽  
pp. 608-620 ◽  
Author(s):  
Siyuan Chang ◽  
Xiaodong Chen ◽  
Shuo Jiang ◽  
Jinchun Chen ◽  
Lin Shi
Keyword(s):  
Bacillus Subtilis ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Patterned Surfaces ◽  
Heat Transfer Efficiency ◽  
Treated Sewage ◽  
Different Characteristics ◽  
Precision Balance

Biofilm is a biological complex caused by bacteria attachment to the substrates and their subsequent reproduction and secretion. This phenomenon reduces heat transfer efficiency and causes significant losses in treated sewage heat-recovering systems. This paper describes a physical approach to inhibit bacteria settlement and biofilm formation by Bacillus subtilis, which is the dominant species in treated sewage. Here, micro-patterned surfaces with different characteristics (stripe and cube) and dimensions (1–100 μm) were fabricated as surfaces of interest. Model sewage was prepared and a rotating coupon device was used to form the biofilms. Precision balance, scanning electron microscopy, and confocal laser scanning microscopy (CLSM) were employed to investigate the inhibitory effects and the mechanisms of the biofilm–surface interactions. The results have shown that surfaces with small pattern sizes (1 and 2 μm) all reduced biofilm formation significantly. Interestingly, the CLSM images showed that the surfaces do not play a role in “killing” the bacteria. These findings are useful for future development of new process surfaces on which bacteria settlement and biofilm formation can be inhibited or minimized.

scholarly journals Inhibition of Quorum Sensing and Biofilm Formation of Esculetin on Aeromonas Hydrophila

2021 ◽  
Vol 12 ◽  
Author(s):  
Bing Sun ◽  
Huaizhi Luo ◽  
Huan Jiang ◽  
Zhennan Wang ◽  
Aiqun Jia
Keyword(s):  
Quorum Sensing ◽  
Aeromonas Hydrophila ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Pcr Analysis ◽  
Swarming Motility ◽  
Gene Expression Levels ◽  
Good Agreement

Quorum sensing (QS) and biofilm formation inhibition activity of esculetin on Aeromonas hydrophila SHAe 115 were evaluated. Exposure to esculetin at 25, 50, and 100μg/ml significantly inhibited the production of protease and hemolysin, the formation of biofilms and attenuated the swarming motility of A. hydrophila SHAe 115. Biofilm forming inhibition was also observed through confocal laser scanning microscopy and scanning electron microscope. Quantitative real-time PCR analysis indicated that genes positively related to QS and biofilm formation were downregulated to varying degrees, while gene (litR) negatively related to biofilm formation was significantly upregulated. The phenotypic results were in good agreement with gene expression levels. These results indicated that esculetin would be a potential QS inhibitor for A. hydrophila.

Sign in / Sign up

Export Citation Format

Share Document