Modification of the Nafion Membrane Using a Chitosan Solution in Carbonic Acid under Pressure

2021 ◽  
Vol 63 (5) ◽  
pp. 496-501
Author(s):  
V. V. Zefirov ◽  
V. E. Sizov ◽  
M. O. Gallyamov
2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Takao Tsuneda

Abstract Mechanism of Fenton reaction, which is a most widely-used degradation test for organic materials using hydrogen peroxide (H$$_2$$ 2 O$$_2$$ 2 ) and iron (Fe) cations, is revealed for the decomposition of hydrated Nafion membrane. This reaction mechanism has been assumed to generate OH radicals. For a doubly-hydrated Nafion membrane model, Fenton reaction with divalent and monovalent Fe (Fe$$^{2+}$$ 2 + and Fe$$^+$$ + ) cation hydration complexes is explored for experimentally-supported hydration numbers using long-range correction for density functional theory. As a result, it is found that H$$_2$$ 2 O$$_2$$ 2 coordinating to the Fe$$^{2+}$$ 2 + hydration complexes first approaches Nafion side chains in high humidity, then leads to the C–S bond dissociation of the side chain to produce carbonic acid group and sulfonic acid ion. On the other hand, once electron transfer proceeds between iron ions, the O–O bond of the coordinating H$$_2$$ 2 O$$_2$$ 2 is extended, then the C–S bond is dissociated to produce trihydroxymethyl group and sulfur trioxide, which are rapidly transformed to carboxyl group and sulfonic acid ion in aquo. This mechanism is confirmed by the vibrational spectrum analysis of the decomposed product. Collective Nafion decomposition mechanisms also suggest that the decomposition reaction uses the recycle of generated Fe cation hydration complexes under acidic condition near membrane surface.


2021 ◽  
Vol 63 (6) ◽  
pp. 749-756
Author(s):  
I. S. Chashchin ◽  
M. S. Rubina ◽  
N. A. Arkharova ◽  
M. A. Pigaleva

Abstract Polymer sponges based on chitosan are first obtained from chitosan solutions in carbonic acid and gels based on these solutions crosslinked by a noncytotoxic agent of natural origin, genipin. A comparative analysis of the structure and mechanical strength properties of sponges prepared from chitosan solutions in carbonic and acetic acids is carried out. It is shown that the addition of genipin in an amount of ~2 wt % to a chitosan solution in carbonic acid leads to a decrease in the average pore size by ~2.5 times and a significant increase in the strength characteristics of the material in comparison with the sponge prepared without genipin.


1887 ◽  
Vol 24 (613supp) ◽  
pp. 9785-9785
Author(s):  
Thomas C. Van Nuys ◽  
Benjamin F. Adams
Keyword(s):  

2019 ◽  
Vol 3 (2) ◽  
pp. 27
Author(s):  
Emma Savitri ◽  
Natalia Suseno ◽  
Tokok Adiarto

Many mass-transfer applications have used chitosan membrane in separation processes. This research applied crosslinked chitosan membrane to sterillize bacterial growth media. Chitosan membranes having 79 % DD were produced by casting and drying chitosan solution. The images of the membrane were characterized by SEM and other characterizations such as permeability, permselectivity and tensile strength were investigated. The flux increased with longer submersion period but the rejection decreased. Otherwise, the flux decreased and rejection increased in line with an increase in curing temperature. Tensile strength increased with the increase of submersion period and curing temperature. The optimum conditions of crosslinking process are 2 hours of submersion periods and curing temperature at 90 oC.  It gives flux 5.8930 L/jam.m2, rejection 97.47 % and tensile strength 49640 kN/m2


2013 ◽  
Vol 14 (3) ◽  
Author(s):  
Eriawan Rismana ◽  
Susi Kusumaningrum ◽  
Olivia Bunga P ◽  
Idah Rosidah ◽  
Marhamah Marhamah

The chitosan – Garcinia Mangostana extract nanoparticles has been prepared by ionic gelation reaction by mixture 0.2 % chitosan solution in acetic acid with Garcinia Mangostana extract and it’s continued by reaction process with 0.1 % sodium tripolyphosphate. The particle size of material was determined by Particle Size Analyzer (PSA) that it showed in the range of 200 – 500 nm. The color, pH, water, α- mangostin, mercury, arsenic, cadmium, lead, totally microbe aerobic, totally mold and yeast, and solvent residue contents of nanoparticles were also examined by many methods that these resulted are yellow, 4.50 – 5.50, 89 – 90 %, 1.05 %, < 0.005 ppm, < 0.01 ppm, < 0.01 ppm, < 0.05 ppm, < 10 CFU/g, < 10 CFU/g and not detected, respectively. The other characterization was also observed that it’sincluded stability andTLC chromatogram. A mixture of nanoparticles with cosmetics bases was showed that it’s increased stability, homogeneity and easy to formed.


2012 ◽  
Vol 12 (1) ◽  
Author(s):  
Purwantiningsih Sugita ◽  
Bambang Srijanto ◽  
Budi Arifin ◽  
Fithri Amelia ◽  
Mahdi Mubarok

Chitosan, a modification of shrimp-shell waste, has been utilized as microcapsule. However, it’s fragile gel property needs to be strengthened by adding glutaraldehyde (glu) and natural hydrocolloid guar gum (gg). This research’s purposes were to study dissolution behaviour of ketoprofen and infar through optimum chitosan-guar gum microcapsule. Into 228.6 mL of 1.75% (w/v) chitosan solution in 1% (v/v) acetic acid,38.1 mL of gg solution was added with concentration variation of 0.35, 0.55, and 0.75% (w/v) for ketoprofen microcapsules and 0.05, 0.19, and 0.33% (w/v) for infar microcapsules, and stirred with magnetic stirrer until homogenous. Afterwards, 7.62mL of glu was added slowly under stirring, with concentrations varied: 3, 3.5, and 4% (v/v) for ketoprofen microcapsules, and 4, 4.5, and 5% (v/v) for infar microcapsules. All mixtures were shaked for 20 minutes for homogenization. All mixtures wereshaked for 20 minutes for homogenization. Into each  microcapsule mixture for ketoprofen, a solution of 2 g of ketoprofen in 250 mL of 96% ethanol was added, whereas solution of 100 mg of in 250 mL of 96% ethanol was added into each microcapsule mixture for infar. Every mixture was then added with 5 mL of 2% Tween-80 and stirred with magnetic stirrer for an hour at room temperature. Everymixture was then added with 5 mL of 2% Tween-80 and stirred with magnetic stirrer for an hour at room temperature. Conversion of suspension into fine powders/granules (microcapsules) was done by using spray dryer. The data of [gg], [glu], and medicine’s content from each microcapsule were treated with Minitab 14 software to obtain optimum [gg] and [glu] for microencapsulation. The dissolution behaviour of optimum ketoprofen and infar microcapsules were investigated. The result of optimization by using Minitab Release 14 software showed that among the microcapsule compositions of [gg] and [glu] were 0.35% (w/v) and 3.75% (v/v), respectively, optimum to coat ketoprofen, whereas [gg] and [glu] of 0.05% (w/v) and4.00% (v/v), respectively, optimum to coat infar, at constant chitosan concentration (1.75% [w/v]). In vitro dissolution profile showed that chitosan-guar gum gel microcapsule was more resistant in intestinal pH condition (rather basic) compared with that in gastric pH (very acidic).


Sign in / Sign up

Export Citation Format

Share Document