A laboratory study of suspension-effect density currents

1969 ◽  
Vol 6 (2) ◽  
pp. 231-246 ◽  
Author(s):  
John F. Riddell
Keyword(s):  
Laboratory Tests ◽  
Settling Velocity ◽  
Scale Effects ◽  
Density Currents ◽  
Material Particle ◽  
Exchange Method ◽  
Wide Range ◽  
Suspension Effect ◽  
The One ◽  
Expected Increase

Suspension-effect density currents formed by both natural and non-natural materials have been investigated in three series of laboratory tests. The lock exchange method of current formation has been shown to be unsuitable for suspensions of high settling velocity and a more effective, dropping method of release has been devised. The adoption of a new linear proportionality equation for correctly correlating the variables acting on the system has demonstrated the significance of the densimetric Froude-Reynolds number for suspension-effect current studies.Quantitative plots of extension against time and non-dimensional time have been prepared for a wide range of concentrations of different materials and the expected increase in both velocity and total extension with increasing concentration verified. For suspensions of constant initial concentration, increase in material particle size has been shown to result in underflows of increased velocity but reduced extension. Mixtures of coarse and fine material in the one suspension have also been investigated.Viscous scale effects have been examined by using two sizes of geometically similar flumes and a short range congruency type of diagram prepared for suspensions of a natural river sediment.Suspension effect currents are compared with the simpler solution effect currents and the greater influence of viscosity on the former discussed together with the suitability of using solution current congruency diagrams for model/prototype studies of suspension-effect currents.

Assessment of changes in biochemical parameters and their role as markers of pathological processes

2020 ◽  
pp. 57-63
Author(s):  
Olga Alekseevna Petrischeva
Keyword(s):  
Biochemical Parameters ◽  
Laboratory Tests ◽  
Correct Diagnosis ◽  
Molecular Genetic ◽  
Clinical Situation ◽  
Test Results ◽  
Genetic Studies ◽  
Maximum Information ◽  
Wide Range ◽  
The One

The data of laboratory tests can often provide up to 70% of information about the disease, and the test results can help the doctor not only in the correct diagnosis and competent prescription of treatment, but also should be aimed at conducting a subsequent assessment of its effectiveness. At the present stage, laboratory tests are represented by a wide range of clinical, immunological, biochemical, microbiological, histological and molecular genetic studies. Evaluation of some parameters (for example, a clinical blood test and a general urinalysis) is carried out practically at each patient's request for medical help, while others are evaluated only if there are indications. For example, if a patient complains of severe dysuric disorders, determining the level of amylase in this case will be uninformative, but urinalysis according to Nechiporenko will contribute to the correct diagnosis. A doctor of a clinical specialty, on the one hand, must clearly understand which tests can help in making a diagnosis and will carry the maximum information content, and, on the other hand, try to avoid unnecessary prescription of tests that have low evidence in a particular clinical situation. One of the most frequently prescribed tests is the conduct of biochemical studies, therefore, in today's article we will try to figure out how biochemical parameters change in various pathological processes, and what information they can bring.

scholarly journals Wave Overtopping of Stepped Revetments

Water ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 1035 ◽  
Author(s):  
Nils B. Kerpen ◽  
Talia Schoonees ◽  
Torsten Schlurmann
Keyword(s):  
Scale Effects ◽  
Vertical Wall ◽  
Breaking Waves ◽  
Design Guidelines ◽  
Coastal Protection ◽  
Wave Overtopping ◽  
Wide Range ◽  
Run Up ◽  
The One ◽  
Parameter Ranges

Wave overtopping—i.e., excess of water over the crest of a coastal protection infrastructure due to wave run-up—of a smooth slope can be reduced by introducing slope roughness. A stepped revetment ideally constitutes a slope with uniform roughness and can reduce overtopping volumes of breaking waves up to 60% compared to a smooth slope. The effectiveness of the overtopping reduction decreases with increasing Iribarren number. However, to date a unique approach applicable for a wide range of boundary conditions is still missing. The present paper: (i) critically reviews and analyzes previous findings; (ii) contributes new results from extensive model tests addressing present knowledge gaps; and (iii) proposes a novel empirical formulation for robust prediction of wave overtopping of stepped revetments for breaking and non-breaking waves. The developed approach contrasts a critical assessment based on parameter ranges disclosed beforehand between a smooth slope on the one hand and a plain vertical wall on the other. The derived roughness reduction coefficient is developed and adjusted for a direct incorporation into the present design guidelines. Underlying uncertainties due to scatter of the results are addressed and quantified. Scale effects are highlighted.

General Trend of Negative Transference Number in Li Salt/Ionic Liquid Mixtures

2019 ◽  
Author(s):  
Nicola Molinari ◽  
Jonathan P. Mailoa ◽  
Boris Kozinsky
Keyword(s):  
Ionic Liquid ◽  
Transference Number ◽  
Liquid Mixtures ◽  
Single Linkage ◽  
Self Diffusion ◽  
Wide Range ◽  
Single Linkage Cluster ◽  
Concentrated Solution ◽  
The One ◽  
Dynamics Simulations

We show that strong cation-anion interactions in a wide range of lithium-salt/ionic liquid mixtures result in a negative lithium transference number, using molecular dynamics simulations and rigorous concentrated solution theory. This behavior fundamentally deviates from the one obtained using self-diffusion coefficient analysis and agrees well with experimental electrophoretic NMR measurements, which accounts for ion correlations. We extend these findings to several ionic liquid compositions. We investigate the degree of spatial ionic coordination employing single-linkage cluster analysis, unveiling asymmetrical anion-cation clusters. Additionally, we formulate a way to compute the effective lithium charge that corresponds to and agrees well with electrophoretic measurements and show that lithium effectively carries a negative charge in a remarkably wide range of chemistries and concentrations. The generality of our observation has significant implications for the energy storage community, emphasizing the need to reconsider the potential of these systems as next generation battery electrolytes.<br>

scholarly journals Modes of Interaction in Naturally Occurring Medical Encounters With General Practitioners: The “One in a Million” Study

2021 ◽  
pp. 104973232199379
Author(s):  
Olaug S. Lian ◽  
Sarah Nettleton ◽  
Åge Wifstad ◽  
Christopher Dowrick
Keyword(s):  
General Practitioners ◽  
Narrative Analysis ◽  
Mode Competition ◽  
General Applicability ◽  
Naturally Occurring ◽  
Wide Range ◽  
The One ◽  
Narrative Mode ◽  
Modes Of Interaction

In this article, we qualitatively explore the manner and style in which medical encounters between patients and general practitioners (GPs) are mutually conducted, as exhibited in situ in 10 consultations sourced from the One in a Million: Primary Care Consultations Archive in England. Our main objectives are to identify interactional modes, to develop a classification of these modes, and to uncover how modes emerge and shift both within and between consultations. Deploying an interactional perspective and a thematic and narrative analysis of consultation transcripts, we identified five distinctive interactional modes: question and answer (Q&A) mode, lecture mode, probabilistic mode, competition mode, and narrative mode. Most modes are GP-led. Mode shifts within consultations generally map on to the chronology of the medical encounter. Patient-led narrative modes are initiated by patients themselves, which demonstrates agency. Our classification of modes derives from complete naturally occurring consultations, covering a wide range of symptoms, and may have general applicability.

scholarly journals Entangling Lattice-Trapped Bosons with a Free Impurity: Impact on Stationary and Dynamical Properties

Entropy ◽  
2021 ◽  
Vol 23 (3) ◽  
pp. 290
Author(s):  
Maxim Pyzh ◽  
Kevin Keiler ◽  
Simeon I. Mistakidis ◽  
Peter Schmelcher
Keyword(s):  
Structural Changes ◽  
Many Body ◽  
Wide Range ◽  
Entropy Measures ◽  
Particle Level ◽  
The Many ◽  
The One ◽  
Tunneling Dynamics ◽  
The Individual ◽  
Trapped Bosons

We address the interplay of few lattice trapped bosons interacting with an impurity atom in a box potential. For the ground state, a classification is performed based on the fidelity allowing to quantify the susceptibility of the composite system to structural changes due to the intercomponent coupling. We analyze the overall response at the many-body level and contrast it to the single-particle level. By inspecting different entropy measures we capture the degree of entanglement and intraspecies correlations for a wide range of intra- and intercomponent interactions and lattice depths. We also spatially resolve the imprint of the entanglement on the one- and two-body density distributions showcasing that it accelerates the phase separation process or acts against spatial localization for repulsive and attractive intercomponent interactions, respectively. The many-body effects on the tunneling dynamics of the individual components, resulting from their counterflow, are also discussed. The tunneling period of the impurity is very sensitive to the value of the impurity-medium coupling due to its effective dressing by the few-body medium. Our work provides implications for engineering localized structures in correlated impurity settings using species selective optical potentials.

scholarly journals Bio-Inspired Modality Fusion for Active Speaker Detection

2021 ◽  
Vol 11 (8) ◽  
pp. 3397
Author(s):  
Gustavo Assunção ◽  
Nuno Gonçalves ◽  
Paulo Menezes
Keyword(s):  
Superior Colliculus ◽  
Visual Information ◽  
Human Beings ◽  
Validation Process ◽  
Detection Approach ◽  
Wide Range ◽  
Speaker Detection ◽  
The One ◽  
The Brain ◽  
Fusion Ability

Human beings have developed fantastic abilities to integrate information from various sensory sources exploring their inherent complementarity. Perceptual capabilities are therefore heightened, enabling, for instance, the well-known "cocktail party" and McGurk effects, i.e., speech disambiguation from a panoply of sound signals. This fusion ability is also key in refining the perception of sound source location, as in distinguishing whose voice is being heard in a group conversation. Furthermore, neuroscience has successfully identified the superior colliculus region in the brain as the one responsible for this modality fusion, with a handful of biological models having been proposed to approach its underlying neurophysiological process. Deriving inspiration from one of these models, this paper presents a methodology for effectively fusing correlated auditory and visual information for active speaker detection. Such an ability can have a wide range of applications, from teleconferencing systems to social robotics. The detection approach initially routes auditory and visual information through two specialized neural network structures. The resulting embeddings are fused via a novel layer based on the superior colliculus, whose topological structure emulates spatial neuron cross-mapping of unimodal perceptual fields. The validation process employed two publicly available datasets, with achieved results confirming and greatly surpassing initial expectations.

Numerical investigation of the propagation of shock waves in rigid porous materials: development of the computer code and comparison with experimental results

1996 ◽  
Vol 324 ◽  
pp. 163-179 ◽  
Author(s):  
A. Levy ◽  
G. Ben-Dor ◽  
S. Sorek
Keyword(s):  
Porous Materials ◽  
Initial Conditions ◽  
Computer Code ◽  
Experimental Results ◽  
Numerical Code ◽  
Materials Development ◽  
Numerical Predictions ◽  
Wide Range ◽  
Dimensional Version ◽  
The One

The governing equations of the flow field which is obtained when a thermoelastic rigid porous medium is struck head-one by a shock wave are developed using the multiphase approach. The one-dimensional version of these equations is solved numerically using a TVD-based numerical code. The numerical predictions are compared to experimental results and good to excellent agreements are obtained for different porous materials and a wide range of initial conditions.

scholarly journals Two-Segment Foot Model for the Biomechanical Analysis of Squat

2017 ◽  
Vol 2017 ◽  
pp. 1-11
Author(s):  
E. Panero ◽  
L. Gastaldi ◽  
W. Rapp
Keyword(s):  
Body Weight ◽  
Inverse Dynamics ◽  
Statistical Significance ◽  
Lower Limbs ◽  
Biomechanical Analysis ◽  
Wide Range ◽  
Foot Model ◽  
Partial Body ◽  
The One ◽  
Midtarsal Joint

Squat exercise is acquiring interest in many fields, due to its benefits in improving health and its biomechanical similarities to a wide range of sport motions and the recruitment of many body segments in a single maneuver. Several researches had examined considerable biomechanical aspects of lower limbs during squat, but not without limitations. The main goal of this study focuses on the analysis of the foot contribution during a partial body weight squat, using a two-segment foot model that considers separately the forefoot and the hindfoot. The forefoot and hindfoot are articulated by the midtarsal joint. Five subjects performed a series of three trials, and results were averaged. Joint kinematics and dynamics were obtained using motion capture system, two force plates closed together, and inverse dynamics techniques. The midtarsal joint reached a dorsiflexion peak of 4°. Different strategies between subjects revealed 4° supination and 2.5° pronation of the forefoot. Vertical GRF showed 20% of body weight concentrated on the forefoot and 30% on the hindfoot. The percentages varied during motion, with a peak of 40% on the hindfoot and correspondently 10% on the forefoot, while the traditional model depicted the unique constant 50% value. Ankle peak of plantarflexion moment, power absorption, and power generation was consistent with values estimated by the one-segment model, without statistical significance.

An Enhanced One-Layer Passive Microfluidic Mixer With an Optimized Lateral Structure With the Dean Effect

2015 ◽  
Vol 137 (9) ◽  
Author(s):  
Teng Zhou ◽  
Yifan Xu ◽  
Zhenyu Liu ◽  
Sang Woo Joo
Keyword(s):  
Reynolds Number ◽  
Topology Optimization ◽  
Optimization Method ◽  
Mixing Efficiency ◽  
Boolean Operation ◽  
Microfluidic Mixer ◽  
Wide Range ◽  
The One ◽  
Lateral Structure ◽  
Topology Optimization Method

Topology optimization method is applied to a contraction–expansion structure, based on which a simplified lateral flow structure is generated using the Boolean operation. A new one-layer mixer is then designed by sequentially connecting this lateral structure and bent channels. The mixing efficiency is further optimized via iterations on key geometric parameters associated with the one-layer mixer designed. Numerical results indicate that the optimized mixer has better mixing efficiency than the conventional contraction–expansion mixer for a wide range of the Reynolds number.

Post-anthesis sink size in a high-yielding dwarf wheat: yield response to grain number

1977 ◽  
Vol 28 (2) ◽  
pp. 165 ◽  
Author(s):  
RA Fischer ◽  
I Aguilar ◽  
DR Laing
Keyword(s):  
Grain Yield ◽  
Wheat Yield ◽  
Kernel Weight ◽  
Yield Response ◽  
High Fertility ◽  
Grain Number ◽  
Wide Range ◽  
Carbon Dioxide Fertilization ◽  
Sink Size ◽  
The One

Experiments to study the effect of grain number per sq metre on kernel weight and grain yield in a high-yielding dwarf spring wheat (Triticum aestivum cv. Yecora 70) were conducted in three seasons (1971–1973) under high-fertility irrigated conditions in north-western Mexico. Crop thinning, shading and carbon dioxide fertilization (reported elsewhere), and crowding treatments, all carried out at or before anthesis, led to a wide range in grain numbers (4000 to 34,000/m2). Results indicated the response of grain yield to changing sink size (grains per sq metre), with the post-anthesis environment identical for all crops each year, and with all but the thinner crops intercepting most of the post-anthesis solar radiation. Kernel weight fell linearly with increase in grain number over the whole range of grain numbers studied, but the rate of fall varied with the season. Grain yield, however, increased, reaching a maximum at grain numbers well above those of crops grown with optimal agronomic management but without manipulation. It was concluded that the grain yield in normal crops was limited by both sink and post-anthesis source. There was some doubt, however, as to the interpretation of results from crowded crops, because of likely artificial increases in crop respiration on the one hand, and on the other, in labile carbohydrate reserves in the crops at anthesis. Also deterioration in grain plumpness (hectolitre weight) complicates the simple inference that further gains in yield can come from increased grain numbers alone.

Sign in / Sign up

Export Citation Format

Share Document